[mipi_spi] Fix log_pin() FlashStringHelper compatibility (#13624)

Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
Co-authored-by: Jonathan Swoboda <154711427+swoboda1337@users.noreply.github.com>
Co-authored-by: J. Nick Koston <nick@home-assistant.io>

.clang-tidy.hash

@@ -1 +1 @@
-cf3d341206b4184ec8b7fe85141aef4fe4696aa720c3f8a06d4e57930574bdab
+069fa9526c52f7c580a9ec17c7678d12f142221387e9b561c18f95394d4629a3

esphome/components/mipi_spi/mipi_spi.cpp

@@ -1,6 +1,39 @@
 #include "mipi_spi.h"
 #include "esphome/core/log.h"
 
-namespace esphome {
-namespace mipi_spi {}  // namespace mipi_spi
-}  // namespace esphome
+namespace esphome::mipi_spi {
+
+void internal_dump_config(const char *model, int width, int height, int offset_width, int offset_height, uint8_t madctl,
+                          bool invert_colors, int display_bits, bool is_big_endian, const optional<uint8_t> &brightness,
+                          GPIOPin *cs, GPIOPin *reset, GPIOPin *dc, int spi_mode, uint32_t data_rate, int bus_width) {
+  ESP_LOGCONFIG(TAG,
+                "MIPI_SPI Display\n"
+                "  Model: %s\n"
+                "  Width: %d\n"
+                "  Height: %d\n"
+                "  Swap X/Y: %s\n"
+                "  Mirror X: %s\n"
+                "  Mirror Y: %s\n"
+                "  Invert colors: %s\n"
+                "  Color order: %s\n"
+                "  Display pixels: %d bits\n"
+                "  Endianness: %s\n"
+                "  SPI Mode: %d\n"
+                "  SPI Data rate: %uMHz\n"
+                "  SPI Bus width: %d",
+                model, width, height, YESNO(madctl & MADCTL_MV), YESNO(madctl & (MADCTL_MX | MADCTL_XFLIP)),
+                YESNO(madctl & (MADCTL_MY | MADCTL_YFLIP)), YESNO(invert_colors), (madctl & MADCTL_BGR) ? "BGR" : "RGB",
+                display_bits, is_big_endian ? "Big" : "Little", spi_mode, static_cast<unsigned>(data_rate / 1000000),
+                bus_width);
+  LOG_PIN("  CS Pin: ", cs);
+  LOG_PIN("  Reset Pin: ", reset);
+  LOG_PIN("  DC Pin: ", dc);
+  if (offset_width != 0)
+    ESP_LOGCONFIG(TAG, "  Offset width: %d", offset_width);
+  if (offset_height != 0)
+    ESP_LOGCONFIG(TAG, "  Offset height: %d", offset_height);
+  if (brightness.has_value())
+    ESP_LOGCONFIG(TAG, "  Brightness: %u", brightness.value());
+}
+
+}  // namespace esphome::mipi_spi

esphome/components/mipi_spi/mipi_spi.h

@@ -63,6 +63,11 @@ enum BusType {
   BUS_TYPE_SINGLE_16 = 16,  // Single bit bus, but 16 bits per transfer
 };
 
+// Helper function for dump_config - defined in mipi_spi.cpp to allow use of LOG_PIN macro
+void internal_dump_config(const char *model, int width, int height, int offset_width, int offset_height, uint8_t madctl,
+                          bool invert_colors, int display_bits, bool is_big_endian, const optional<uint8_t> &brightness,
+                          GPIOPin *cs, GPIOPin *reset, GPIOPin *dc, int spi_mode, uint32_t data_rate, int bus_width);
+
 /**
  * Base class for MIPI SPI displays.
  * All the methods are defined here in the header file, as it is not possible to define templated methods in a cpp file.
@@ -201,37 +206,9 @@ class MipiSpi : public display::Display,
   }
 
   void dump_config() override {
-    esph_log_config(TAG,
-                    "MIPI_SPI Display\n"
-                    "  Model: %s\n"
-                    "  Width: %u\n"
-                    "  Height: %u",
-                    this->model_, WIDTH, HEIGHT);
-    if constexpr (OFFSET_WIDTH != 0)
-      esph_log_config(TAG, "  Offset width: %u", OFFSET_WIDTH);
-    if constexpr (OFFSET_HEIGHT != 0)
-      esph_log_config(TAG, "  Offset height: %u", OFFSET_HEIGHT);
-    esph_log_config(TAG,
-                    "  Swap X/Y: %s\n"
-                    "  Mirror X: %s\n"
-                    "  Mirror Y: %s\n"
-                    "  Invert colors: %s\n"
-                    "  Color order: %s\n"
-                    "  Display pixels: %d bits\n"
-                    "  Endianness: %s\n",
-                    YESNO(this->madctl_ & MADCTL_MV), YESNO(this->madctl_ & (MADCTL_MX | MADCTL_XFLIP)),
-                    YESNO(this->madctl_ & (MADCTL_MY | MADCTL_YFLIP)), YESNO(this->invert_colors_),
-                    this->madctl_ & MADCTL_BGR ? "BGR" : "RGB", DISPLAYPIXEL * 8, IS_BIG_ENDIAN ? "Big" : "Little");
-    if (this->brightness_.has_value())
-      esph_log_config(TAG, "  Brightness: %u", this->brightness_.value());
-    log_pin(TAG, "  CS Pin: ", this->cs_);
-    log_pin(TAG, "  Reset Pin: ", this->reset_pin_);
-    log_pin(TAG, "  DC Pin: ", this->dc_pin_);
-    esph_log_config(TAG,
-                    "  SPI Mode: %d\n"
-                    "  SPI Data rate: %dMHz\n"
-                    "  SPI Bus width: %d",
-                    this->mode_, static_cast<unsigned>(this->data_rate_ / 1000000), BUS_TYPE);
+    internal_dump_config(this->model_, WIDTH, HEIGHT, OFFSET_WIDTH, OFFSET_HEIGHT, this->madctl_, this->invert_colors_,
+                         DISPLAYPIXEL * 8, IS_BIG_ENDIAN, this->brightness_, this->cs_, this->reset_pin_, this->dc_pin_,
+                         this->mode_, this->data_rate_, BUS_TYPE);
   }
 
  protected:

esphome/components/mqtt/mqtt_client.cpp

@@ -643,10 +643,34 @@ static bool topic_match(const char *message, const char *subscription) {
 }
 
 void MQTTClientComponent::on_message(const std::string &topic, const std::string &payload) {
-  for (auto &subscription : this->subscriptions_) {
-    if (topic_match(topic.c_str(), subscription.topic.c_str()))
-      subscription.callback(topic, payload);
-  }
+#ifdef USE_ESP8266
+  // IMPORTANT: This defer is REQUIRED to prevent stack overflow crashes on ESP8266.
+  //
+  // On ESP8266, this callback is invoked directly from the lwIP/AsyncTCP network stack
+  // which runs in the "sys" context with a very limited stack (~4KB). By the time we
+  // reach this function, the stack is already partially consumed by the network
+  // processing chain: tcp_input -> AsyncClient::_recv -> AsyncMqttClient::_onMessage -> here.
+  //
+  // MQTT subscription callbacks can trigger arbitrary user actions (automations, HTTP
+  // requests, sensor updates, etc.) which may have deep call stacks of their own.
+  // For example, an HTTP request action requires: DNS lookup -> TCP connect -> TLS
+  // handshake (if HTTPS) -> request formatting. This easily overflows the remaining
+  // system stack space, causing a LoadStoreAlignmentCause exception or silent corruption.
+  //
+  // By deferring to the main loop, we ensure callbacks execute with a fresh, full-size
+  // stack in the normal application context rather than the constrained network task.
+  //
+  // DO NOT REMOVE THIS DEFER without understanding the above. It may appear to work
+  // in simple tests but will cause crashes with complex automations.
+  this->defer([this, topic, payload]() {
+#endif
+    for (auto &subscription : this->subscriptions_) {
+      if (topic_match(topic.c_str(), subscription.topic.c_str()))
+        subscription.callback(topic, payload);
+    }
+#ifdef USE_ESP8266
+  });
+#endif
 }
 
 // Setters

esphome/components/pmsx003/pmsx003.cpp

@@ -2,21 +2,20 @@
 #include "esphome/core/log.h"
 #include "esphome/core/application.h"
 
-namespace esphome {
-namespace pmsx003 {
+namespace esphome::pmsx003 {
 
 static const char *const TAG = "pmsx003";
 
 static const uint8_t START_CHARACTER_1 = 0x42;
 static const uint8_t START_CHARACTER_2 = 0x4D;
 
-static const uint16_t PMS_STABILISING_MS = 30000;  // time taken for the sensor to become stable after power on in ms
+static const uint16_t STABILISING_MS = 30000;  // time taken for the sensor to become stable after power on in ms
 
-static const uint16_t PMS_CMD_MEASUREMENT_MODE_PASSIVE =
-    0x0000;  // use `PMS_CMD_MANUAL_MEASUREMENT` to trigger a measurement
-static const uint16_t PMS_CMD_MEASUREMENT_MODE_ACTIVE = 0x0001;  // automatically perform measurements
-static const uint16_t PMS_CMD_SLEEP_MODE_SLEEP = 0x0000;         // go to sleep mode
-static const uint16_t PMS_CMD_SLEEP_MODE_WAKEUP = 0x0001;        // wake up from sleep mode
+static const uint16_t CMD_MEASUREMENT_MODE_PASSIVE =
+    0x0000;  // use `Command::MANUAL_MEASUREMENT` to trigger a measurement
+static const uint16_t CMD_MEASUREMENT_MODE_ACTIVE = 0x0001;  // automatically perform measurements
+static const uint16_t CMD_SLEEP_MODE_SLEEP = 0x0000;         // go to sleep mode
+static const uint16_t CMD_SLEEP_MODE_WAKEUP = 0x0001;        // wake up from sleep mode
 
 void PMSX003Component::setup() {}
 
@@ -42,7 +41,7 @@ void PMSX003Component::dump_config() {
   LOG_SENSOR("  ", "Temperature", this->temperature_sensor_);
   LOG_SENSOR("  ", "Humidity", this->humidity_sensor_);
 
-  if (this->update_interval_ <= PMS_STABILISING_MS) {
+  if (this->update_interval_ <= STABILISING_MS) {
     ESP_LOGCONFIG(TAG, "  Mode: active continuous (sensor default)");
   } else {
     ESP_LOGCONFIG(TAG, "  Mode: passive with sleep/wake cycles");
@@ -55,44 +54,44 @@ void PMSX003Component::loop() {
   const uint32_t now = App.get_loop_component_start_time();
 
   // Initialize sensor mode on first loop
-  if (this->initialised_ == 0) {
-    if (this->update_interval_ > PMS_STABILISING_MS) {
+  if (!this->initialised_) {
+    if (this->update_interval_ > STABILISING_MS) {
       // Long update interval: use passive mode with sleep/wake cycles
-      this->send_command_(PMS_CMD_MEASUREMENT_MODE, PMS_CMD_MEASUREMENT_MODE_PASSIVE);
-      this->send_command_(PMS_CMD_SLEEP_MODE, PMS_CMD_SLEEP_MODE_WAKEUP);
+      this->send_command_(Command::MEASUREMENT_MODE, CMD_MEASUREMENT_MODE_PASSIVE);
+      this->send_command_(Command::SLEEP_MODE, CMD_SLEEP_MODE_WAKEUP);
     } else {
       // Short/zero update interval: use active continuous mode
-      this->send_command_(PMS_CMD_MEASUREMENT_MODE, PMS_CMD_MEASUREMENT_MODE_ACTIVE);
+      this->send_command_(Command::MEASUREMENT_MODE, CMD_MEASUREMENT_MODE_ACTIVE);
     }
-    this->initialised_ = 1;
+    this->initialised_ = true;
   }
 
   // If we update less often than it takes the device to stabilise, spin the fan down
   // rather than running it constantly. It does take some time to stabilise, so we
   // need to keep track of what state we're in.
-  if (this->update_interval_ > PMS_STABILISING_MS) {
+  if (this->update_interval_ > STABILISING_MS) {
     switch (this->state_) {
-      case PMSX003_STATE_IDLE:
+      case State::IDLE:
         // Power on the sensor now so it'll be ready when we hit the update time
-        if (now - this->last_update_ < (this->update_interval_ - PMS_STABILISING_MS))
+        if (now - this->last_update_ < (this->update_interval_ - STABILISING_MS))
           return;
 
-        this->state_ = PMSX003_STATE_STABILISING;
-        this->send_command_(PMS_CMD_SLEEP_MODE, PMS_CMD_SLEEP_MODE_WAKEUP);
+        this->state_ = State::STABILISING;
+        this->send_command_(Command::SLEEP_MODE, CMD_SLEEP_MODE_WAKEUP);
         this->fan_on_time_ = now;
         return;
-      case PMSX003_STATE_STABILISING:
+      case State::STABILISING:
         // wait for the sensor to be stable
-        if (now - this->fan_on_time_ < PMS_STABILISING_MS)
+        if (now - this->fan_on_time_ < STABILISING_MS)
           return;
         // consume any command responses that are in the serial buffer
         while (this->available())
           this->read_byte(&this->data_[0]);
         // Trigger a new read
-        this->send_command_(PMS_CMD_MANUAL_MEASUREMENT, 0);
-        this->state_ = PMSX003_STATE_WAITING;
+        this->send_command_(Command::MANUAL_MEASUREMENT, 0);
+        this->state_ = State::WAITING;
         break;
-      case PMSX003_STATE_WAITING:
+      case State::WAITING:
         // Just go ahead and read stuff
         break;
     }
@@ -180,27 +179,31 @@ optional<bool> PMSX003Component::check_byte_() {
 }
 
 bool PMSX003Component::check_payload_length_(uint16_t payload_length) {
+  // https://avaldebe.github.io/PyPMS/sensors/Plantower/
   switch (this->type_) {
-    case PMSX003_TYPE_X003:
-      // The expected payload length is typically 28 bytes.
-      // However, a 20-byte payload check was already present in the code.
-      // No official documentation was found confirming this.
-      // Retaining this check to avoid breaking existing behavior.
+    case Type::PMS1003:
+      return payload_length == 28;  // 2*13+2
+    case Type::PMS3003:             // Data 7/8/9 not set/reserved
+      return payload_length == 20;  // 2*9+2
+    case Type::PMSX003:             // Data 13 not set/reserved
+      // Deprecated: Length 20 is for PMS3003 backwards compatibility
       return payload_length == 28 || payload_length == 20;  // 2*13+2
-    case PMSX003_TYPE_5003T:
-    case PMSX003_TYPE_5003S:
-      return payload_length == 28;  // 2*13+2 (Data 13 not set/reserved)
-    case PMSX003_TYPE_5003ST:
-      return payload_length == 36;  // 2*17+2 (Data 16 not set/reserved)
+    case Type::PMS5003S:
+    case Type::PMS5003T:            // Data 13 not set/reserved
+      return payload_length == 28;  // 2*13+2
+    case Type::PMS5003ST:           // Data 16 not set/reserved
+      return payload_length == 36;  // 2*17+2
+    case Type::PMS9003M:
+      return payload_length == 28;  // 2*13+2
   }
   return false;
 }
 
-void PMSX003Component::send_command_(PMSX0003Command cmd, uint16_t data) {
+void PMSX003Component::send_command_(Command cmd, uint16_t data) {
   uint8_t send_data[7] = {
       START_CHARACTER_1,            // Start Byte 1
       START_CHARACTER_2,            // Start Byte 2
-      cmd,                          // Command
+      static_cast<uint8_t>(cmd),    // Command
       uint8_t((data >> 8) & 0xFF),  // Data 1
       uint8_t((data >> 0) & 0xFF),  // Data 2
       0,                            // Verify Byte 1
@@ -265,7 +268,7 @@ void PMSX003Component::parse_data_() {
   if (this->pm_particles_25um_sensor_ != nullptr)
     this->pm_particles_25um_sensor_->publish_state(pm_particles_25um);
 
-  if (this->type_ == PMSX003_TYPE_5003T) {
+  if (this->type_ == Type::PMS5003T) {
     ESP_LOGD(TAG,
              "Got PM0.3 Particles: %u Count/0.1L, PM0.5 Particles: %u Count/0.1L, PM1.0 Particles: %u Count/0.1L, "
              "PM2.5 Particles %u Count/0.1L",
@@ -289,7 +292,7 @@ void PMSX003Component::parse_data_() {
   }
 
   // Formaldehyde
-  if (this->type_ == PMSX003_TYPE_5003ST || this->type_ == PMSX003_TYPE_5003S) {
+  if (this->type_ == Type::PMS5003S || this->type_ == Type::PMS5003ST) {
     const uint16_t formaldehyde = this->get_16_bit_uint_(28);
 
     ESP_LOGD(TAG, "Got Formaldehyde: %u µg/m^3", formaldehyde);
@@ -299,8 +302,8 @@ void PMSX003Component::parse_data_() {
   }
 
   // Temperature and Humidity
-  if (this->type_ == PMSX003_TYPE_5003ST || this->type_ == PMSX003_TYPE_5003T) {
-    const uint8_t temperature_offset = (this->type_ == PMSX003_TYPE_5003T) ? 24 : 30;
+  if (this->type_ == Type::PMS5003T || this->type_ == Type::PMS5003ST) {
+    const uint8_t temperature_offset = (this->type_ == Type::PMS5003T) ? 24 : 30;
 
     const float temperature = static_cast<int16_t>(this->get_16_bit_uint_(temperature_offset)) / 10.0f;
     const float humidity = this->get_16_bit_uint_(temperature_offset + 2) / 10.0f;
@@ -314,22 +317,22 @@ void PMSX003Component::parse_data_() {
   }
 
   // Firmware Version and Error Code
-  if (this->type_ == PMSX003_TYPE_5003ST) {
-    const uint8_t firmware_version = this->data_[36];
-    const uint8_t error_code = this->data_[37];
+  if (this->type_ == Type::PMS1003 || this->type_ == Type::PMS5003ST || this->type_ == Type::PMS9003M) {
+    const uint8_t firmware_error_code_offset = (this->type_ == Type::PMS5003ST) ? 36 : 28;
+    const uint8_t firmware_version = this->data_[firmware_error_code_offset];
+    const uint8_t error_code = this->data_[firmware_error_code_offset + 1];
 
     ESP_LOGD(TAG, "Got Firmware Version: 0x%02X, Error Code: 0x%02X", firmware_version, error_code);
   }
 
   // Spin down the sensor again if we aren't going to need it until more time has
   // passed than it takes to stabilise
-  if (this->update_interval_ > PMS_STABILISING_MS) {
-    this->send_command_(PMS_CMD_SLEEP_MODE, PMS_CMD_SLEEP_MODE_SLEEP);
-    this->state_ = PMSX003_STATE_IDLE;
+  if (this->update_interval_ > STABILISING_MS) {
+    this->send_command_(Command::SLEEP_MODE, CMD_SLEEP_MODE_SLEEP);
+    this->state_ = State::IDLE;
   }
 
   this->status_clear_warning();
 }
 
-}  // namespace pmsx003
-}  // namespace esphome
+}  // namespace esphome::pmsx003

esphome/components/pmsx003/pmsx003.h

@@ -5,27 +5,28 @@
 #include "esphome/components/sensor/sensor.h"
 #include "esphome/components/uart/uart.h"
 
-namespace esphome {
-namespace pmsx003 {
+namespace esphome::pmsx003 {
 
-enum PMSX0003Command : uint8_t {
-  PMS_CMD_MEASUREMENT_MODE =
-      0xE1,  // Data Options: `PMS_CMD_MEASUREMENT_MODE_PASSIVE`, `PMS_CMD_MEASUREMENT_MODE_ACTIVE`
-  PMS_CMD_MANUAL_MEASUREMENT = 0xE2,
-  PMS_CMD_SLEEP_MODE = 0xE4,  // Data Options: `PMS_CMD_SLEEP_MODE_SLEEP`, `PMS_CMD_SLEEP_MODE_WAKEUP`
+enum class Type : uint8_t {
+  PMS1003 = 0,
+  PMS3003,
+  PMSX003,  // PMS5003, PMS6003, PMS7003, PMSA003 (NOT PMSA003I - see `pmsa003i` component)
+  PMS5003S,
+  PMS5003T,
+  PMS5003ST,
+  PMS9003M,
 };
 
-enum PMSX003Type {
-  PMSX003_TYPE_X003 = 0,
-  PMSX003_TYPE_5003T,
-  PMSX003_TYPE_5003ST,
-  PMSX003_TYPE_5003S,
+enum class Command : uint8_t {
+  MEASUREMENT_MODE = 0xE1,  // Data Options: `CMD_MEASUREMENT_MODE_PASSIVE`, `CMD_MEASUREMENT_MODE_ACTIVE`
+  MANUAL_MEASUREMENT = 0xE2,
+  SLEEP_MODE = 0xE4,  // Data Options: `CMD_SLEEP_MODE_SLEEP`, `CMD_SLEEP_MODE_WAKEUP`
 };
 
-enum PMSX003State {
-  PMSX003_STATE_IDLE = 0,
-  PMSX003_STATE_STABILISING,
-  PMSX003_STATE_WAITING,
+enum class State : uint8_t {
+  IDLE = 0,
+  STABILISING,
+  WAITING,
 };
 
 class PMSX003Component : public uart::UARTDevice, public Component {
@@ -37,7 +38,7 @@ class PMSX003Component : public uart::UARTDevice, public Component {
 
   void set_update_interval(uint32_t update_interval) { this->update_interval_ = update_interval; }
 
-  void set_type(PMSX003Type type) { this->type_ = type; }
+  void set_type(Type type) { this->type_ = type; }
 
   void set_pm_1_0_std_sensor(sensor::Sensor *pm_1_0_std_sensor) { this->pm_1_0_std_sensor_ = pm_1_0_std_sensor; }
   void set_pm_2_5_std_sensor(sensor::Sensor *pm_2_5_std_sensor) { this->pm_2_5_std_sensor_ = pm_2_5_std_sensor; }
@@ -77,20 +78,20 @@ class PMSX003Component : public uart::UARTDevice, public Component {
   optional<bool> check_byte_();
   void parse_data_();
   bool check_payload_length_(uint16_t payload_length);
-  void send_command_(PMSX0003Command cmd, uint16_t data);
+  void send_command_(Command cmd, uint16_t data);
   uint16_t get_16_bit_uint_(uint8_t start_index) const {
     return encode_uint16(this->data_[start_index], this->data_[start_index + 1]);
   }
 
+  Type type_;
+  State state_{State::IDLE};
+  bool initialised_{false};
   uint8_t data_[64];
   uint8_t data_index_{0};
-  uint8_t initialised_{0};
   uint32_t fan_on_time_{0};
   uint32_t last_update_{0};
   uint32_t last_transmission_{0};
   uint32_t update_interval_{0};
-  PMSX003State state_{PMSX003_STATE_IDLE};
-  PMSX003Type type_;
 
   // "Standard Particle"
   sensor::Sensor *pm_1_0_std_sensor_{nullptr};
@@ -118,5 +119,4 @@ class PMSX003Component : public uart::UARTDevice, public Component {
   sensor::Sensor *humidity_sensor_{nullptr};
 };
 
-}  // namespace pmsx003
-}  // namespace esphome
+}  // namespace esphome::pmsx003

esphome/components/pmsx003/sensor.py

@@ -40,34 +40,128 @@ pmsx003_ns = cg.esphome_ns.namespace("pmsx003")
 PMSX003Component = pmsx003_ns.class_("PMSX003Component", uart.UARTDevice, cg.Component)
 PMSX003Sensor = pmsx003_ns.class_("PMSX003Sensor", sensor.Sensor)
 
-TYPE_PMSX003 = "PMSX003"
+TYPE_PMS1003 = "PMS1003"
+TYPE_PMS3003 = "PMS3003"
+TYPE_PMSX003 = "PMSX003"  # PMS5003, PMS6003, PMS7003, PMSA003 (NOT PMSA003I - see `pmsa003i` component)
+TYPE_PMS5003S = "PMS5003S"
 TYPE_PMS5003T = "PMS5003T"
 TYPE_PMS5003ST = "PMS5003ST"
-TYPE_PMS5003S = "PMS5003S"
+TYPE_PMS9003M = "PMS9003M"
 
-PMSX003Type = pmsx003_ns.enum("PMSX003Type")
+Type = pmsx003_ns.enum("Type", is_class=True)
 
 PMSX003_TYPES = {
-    TYPE_PMSX003: PMSX003Type.PMSX003_TYPE_X003,
-    TYPE_PMS5003T: PMSX003Type.PMSX003_TYPE_5003T,
-    TYPE_PMS5003ST: PMSX003Type.PMSX003_TYPE_5003ST,
-    TYPE_PMS5003S: PMSX003Type.PMSX003_TYPE_5003S,
+    TYPE_PMS1003: Type.PMS1003,
+    TYPE_PMS3003: Type.PMS3003,
+    TYPE_PMSX003: Type.PMSX003,
+    TYPE_PMS5003S: Type.PMS5003S,
+    TYPE_PMS5003T: Type.PMS5003T,
+    TYPE_PMS5003ST: Type.PMS5003ST,
+    TYPE_PMS9003M: Type.PMS9003M,
 }
 
 SENSORS_TO_TYPE = {
-    CONF_PM_1_0: [TYPE_PMSX003, TYPE_PMS5003T, TYPE_PMS5003ST, TYPE_PMS5003S],
-    CONF_PM_2_5: [TYPE_PMSX003, TYPE_PMS5003T, TYPE_PMS5003ST, TYPE_PMS5003S],
-    CONF_PM_10_0: [TYPE_PMSX003, TYPE_PMS5003T, TYPE_PMS5003ST, TYPE_PMS5003S],
-    CONF_PM_1_0_STD: [TYPE_PMSX003, TYPE_PMS5003T, TYPE_PMS5003ST, TYPE_PMS5003S],
-    CONF_PM_2_5_STD: [TYPE_PMSX003, TYPE_PMS5003T, TYPE_PMS5003ST, TYPE_PMS5003S],
-    CONF_PM_10_0_STD: [TYPE_PMSX003, TYPE_PMS5003T, TYPE_PMS5003ST, TYPE_PMS5003S],
-    CONF_PM_0_3UM: [TYPE_PMSX003, TYPE_PMS5003T, TYPE_PMS5003ST, TYPE_PMS5003S],
-    CONF_PM_0_5UM: [TYPE_PMSX003, TYPE_PMS5003T, TYPE_PMS5003ST, TYPE_PMS5003S],
-    CONF_PM_1_0UM: [TYPE_PMSX003, TYPE_PMS5003T, TYPE_PMS5003ST, TYPE_PMS5003S],
-    CONF_PM_2_5UM: [TYPE_PMSX003, TYPE_PMS5003T, TYPE_PMS5003ST, TYPE_PMS5003S],
-    CONF_PM_5_0UM: [TYPE_PMSX003, TYPE_PMS5003ST, TYPE_PMS5003S],
-    CONF_PM_10_0UM: [TYPE_PMSX003, TYPE_PMS5003ST, TYPE_PMS5003S],
-    CONF_FORMALDEHYDE: [TYPE_PMS5003ST, TYPE_PMS5003S],
+    CONF_PM_1_0_STD: [
+        TYPE_PMS1003,
+        TYPE_PMS3003,
+        TYPE_PMSX003,
+        TYPE_PMS5003S,
+        TYPE_PMS5003T,
+        TYPE_PMS5003ST,
+        TYPE_PMS9003M,
+    ],
+    CONF_PM_2_5_STD: [
+        TYPE_PMS1003,
+        TYPE_PMS3003,
+        TYPE_PMSX003,
+        TYPE_PMS5003S,
+        TYPE_PMS5003T,
+        TYPE_PMS5003ST,
+        TYPE_PMS9003M,
+    ],
+    CONF_PM_10_0_STD: [
+        TYPE_PMS1003,
+        TYPE_PMS3003,
+        TYPE_PMSX003,
+        TYPE_PMS5003S,
+        TYPE_PMS5003T,
+        TYPE_PMS5003ST,
+        TYPE_PMS9003M,
+    ],
+    CONF_PM_1_0: [
+        TYPE_PMS1003,
+        TYPE_PMS3003,
+        TYPE_PMSX003,
+        TYPE_PMS5003S,
+        TYPE_PMS5003T,
+        TYPE_PMS5003ST,
+        TYPE_PMS9003M,
+    ],
+    CONF_PM_2_5: [
+        TYPE_PMS1003,
+        TYPE_PMS3003,
+        TYPE_PMSX003,
+        TYPE_PMS5003S,
+        TYPE_PMS5003T,
+        TYPE_PMS5003ST,
+        TYPE_PMS9003M,
+    ],
+    CONF_PM_10_0: [
+        TYPE_PMS1003,
+        TYPE_PMS3003,
+        TYPE_PMSX003,
+        TYPE_PMS5003S,
+        TYPE_PMS5003T,
+        TYPE_PMS5003ST,
+        TYPE_PMS9003M,
+    ],
+    CONF_PM_0_3UM: [
+        TYPE_PMS1003,
+        TYPE_PMSX003,
+        TYPE_PMS5003S,
+        TYPE_PMS5003T,
+        TYPE_PMS5003ST,
+        TYPE_PMS9003M,
+    ],
+    CONF_PM_0_5UM: [
+        TYPE_PMS1003,
+        TYPE_PMSX003,
+        TYPE_PMS5003S,
+        TYPE_PMS5003T,
+        TYPE_PMS5003ST,
+        TYPE_PMS9003M,
+    ],
+    CONF_PM_1_0UM: [
+        TYPE_PMS1003,
+        TYPE_PMSX003,
+        TYPE_PMS5003S,
+        TYPE_PMS5003T,
+        TYPE_PMS5003ST,
+        TYPE_PMS9003M,
+    ],
+    CONF_PM_2_5UM: [
+        TYPE_PMS1003,
+        TYPE_PMSX003,
+        TYPE_PMS5003S,
+        TYPE_PMS5003T,
+        TYPE_PMS5003ST,
+        TYPE_PMS9003M,
+    ],
+    CONF_PM_5_0UM: [
+        TYPE_PMS1003,
+        TYPE_PMSX003,
+        TYPE_PMS5003S,
+        TYPE_PMS5003ST,
+        TYPE_PMS9003M,
+    ],
+    CONF_PM_10_0UM: [
+        TYPE_PMS1003,
+        TYPE_PMSX003,
+        TYPE_PMS5003S,
+        TYPE_PMS5003ST,
+        TYPE_PMS9003M,
+    ],
+    CONF_FORMALDEHYDE: [TYPE_PMS5003S, TYPE_PMS5003ST],
     CONF_TEMPERATURE: [TYPE_PMS5003T, TYPE_PMS5003ST],
     CONF_HUMIDITY: [TYPE_PMS5003T, TYPE_PMS5003ST],
 }

esphome/components/web_server_base/__init__.py

@@ -53,4 +53,4 @@ async def to_code(config):
                 "lib_ignore", ["ESPAsyncTCP", "AsyncTCP", "AsyncTCP_RP2040W"]
             )
         # https://github.com/ESP32Async/ESPAsyncWebServer/blob/main/library.json
-        cg.add_library("ESP32Async/ESPAsyncWebServer", "3.9.5")
+        cg.add_library("ESP32Async/ESPAsyncWebServer", "3.9.6")

esphome/core/application.cpp

@@ -210,7 +210,7 @@ void Application::loop() {
 #ifdef USE_ESP32
       esp_chip_info_t chip_info;
       esp_chip_info(&chip_info);
-      ESP_LOGI(TAG, "ESP32 Chip: %s r%d.%d, %d core(s)", ESPHOME_VARIANT, chip_info.revision / 100,
+      ESP_LOGI(TAG, "ESP32 Chip: %s rev%d.%d, %d core(s)", ESPHOME_VARIANT, chip_info.revision / 100,
                chip_info.revision % 100, chip_info.cores);
 #if defined(USE_ESP32_VARIANT_ESP32) && !defined(USE_ESP32_MIN_CHIP_REVISION_SET)
       // Suggest optimization for chips that don't need the PSRAM cache workaround

platformio.ini

@@ -114,7 +114,7 @@ lib_deps =
     ESP8266WiFi                           ; wifi (Arduino built-in)
     Update                                ; ota (Arduino built-in)
     ESP32Async/ESPAsyncTCP@2.0.0          ; async_tcp
-    ESP32Async/ESPAsyncWebServer@3.9.5    ; web_server_base
+    ESP32Async/ESPAsyncWebServer@3.9.6    ; web_server_base
     makuna/NeoPixelBus@2.7.3              ; neopixelbus
     ESP8266HTTPClient                     ; http_request (Arduino built-in)
     ESP8266mDNS                           ; mdns (Arduino built-in)
@@ -202,7 +202,7 @@ lib_deps =
     ${common:arduino.lib_deps}
     ayushsharma82/RPAsyncTCP@1.3.2        ; async_tcp
     bblanchon/ArduinoJson@7.4.2           ; json
-    ESP32Async/ESPAsyncWebServer@3.9.5    ; web_server_base
+    ESP32Async/ESPAsyncWebServer@3.9.6    ; web_server_base
 build_flags =
     ${common:arduino.build_flags}
     -DUSE_RP2040
@@ -218,7 +218,7 @@ framework = arduino
 lib_compat_mode = soft
 lib_deps =
     bblanchon/ArduinoJson@7.4.2           ; json
-    ESP32Async/ESPAsyncWebServer@3.9.5    ; web_server_base
+    ESP32Async/ESPAsyncWebServer@3.9.6    ; web_server_base
     droscy/esp_wireguard@0.4.2            ; wireguard
 build_flags =
     ${common:arduino.build_flags}

tests/components/mipi_spi/test.esp8266-ard.yaml

@@ -0,0 +1,10 @@
+substitutions:
+  dc_pin: GPIO15
+  cs_pin: GPIO5
+  enable_pin: GPIO4
+  reset_pin: GPIO16
+
+packages:
+  spi: !include ../../test_build_components/common/spi/esp8266-ard.yaml
+
+<<: !include common.yaml

tests/components/pmsx003/common.yaml

@@ -8,11 +8,11 @@ sensor:
     pm_10_0:
       name: PM 10.0 Concentration
     pm_1_0_std:
-      name: PM 1.0 Standard Atmospher Concentration
+      name: PM 1.0 Standard Atmospheric Concentration
     pm_2_5_std:
-      name: PM 2.5 Standard Atmospher Concentration
+      name: PM 2.5 Standard Atmospheric Concentration
     pm_10_0_std:
-      name: PM 10.0 Standard Atmospher Concentration
+      name: PM 10.0 Standard Atmospheric Concentration
     pm_0_3um:
       name: Particulate Count >0.3um
     pm_0_5um: