1. See above.
2. Reuse the 4k ROM with proper loading mechanism so that extended ATI modes can be used with the ATI 8514 Ultra 4k ROM (add-on).
3. Disable excess logging.
4. Apparently 8514/A bresenham line must always draw the last pixel unlike the vector lines, fixes missing pixels in some programs e.g.: calculator on Windows 3.x using 8514/A drivers.
Since the default 10.0.2.0/24 (or 10.0.3.0... etc) address can
conflict with a LAN (as it does in my case), this feature now adds the
ability to set custom network prefixes in the configuration file. I
believe this is an “advanced” usage feature (like port forwarding) and
should not be exposed in the GUI, therefore no GUI changes have been
made.
In the `[Network]` section of 86box.cfg, each of the four NICs can be
set to have a custom address like such:
```
net_01_addr = 10.80.88.0
net_02_addr = 10.82.86.0
net_03_addr = 10.84.86.0
net_04_addr = 10.85.86.0
```
The last octet of the address is effectively ignored and always set to
0 again when the configuration file is saved. Only a /24 CIDR
(netmask 255.255.255.0) is supported. IPv4 has three local-scope
ranges: 10.0.0.0/8, 172.16.0.0/12, and 192.168.0.0. Finding a network
prefix within these that do not conflict with your real LAN should not
pose a problem.
Previously, we determined the UI font from a predefined set of fonts
each mapped to a language. This works well if the user doesn't change
their Windows UI font, but if one does, they will get the default UI
font associated with their language instead of the one the set.
This commit replaces ProgSettings::getFontName with
ProgSettings::getUIFont, which uses the SystemParametersInfo API to
query the message font from the system, which will allow users to have a
custom font. It will also not interfere with different languages, as the
message font will be appropriately set by default there.
The Olivetti OEM BIOS' date (06/05/99) is newer than the current one (01/18/99).
Until the actual voltage and multiplier bus speeds are found, I adjusted them to match other i440LX/EX machines. Also added a note about onboard video.
The four versions are:
- EX-1000 and 7 other early printers (including FX-80, the only Epson
available OOTB for Windows 1.03), have ESC i and ESC j.
- 9-pin ESC/P, a superset of EX-1000 besides ESC i and ESC j.
- 24-pin ESC/P in 360 DPI instead of 240.
- ESC/P 2 with raster graphics.
As for paper, four sizes: Letter, A4, Legal, B4. The former ones are
mainly for EX-800, the latter two are sideways and meant for EX-1000.
I did some other minor changes, like converting a bunch of defines to enum.
