Merge branch 'master' into family/ambz2

boards/_base/beken-7231-tuya.json

@@ -0,0 +1,8 @@
+{
+	"build": {
+		"bkcrypt_coeffs": "510fb093a3cbeadc5993a17ec7adeb03"
+	},
+	"flash": {
+		"tuya": "0x1ED000+0x13000"
+	}
+}

boards/_base/beken-7231.json

@@ -0,0 +1,10 @@
+{
+	"build": {
+		"ldscript": "bk7231_bsp.ld",
+		"bkoffset_app": "0x10000",
+		"bkrbl_size_app": "0x108700"
+	},
+	"upload": {
+		"maximum_size": 1083136
+	}
+}

boards/_base/beken-7231n-tuya.json

@@ -1,9 +0,0 @@
-{
-	"build": {
-		"bkcrypt_coeffs": "510fb093a3cbeadc5993a17ec7adeb03",
-		"bkboot_version": "1.0.1-bk7231n"
-	},
-	"flash": {
-		"tuya": "0x1ED000+0x13000"
-	}
-}

boards/_base/beken-7231n.json

@@ -12,6 +12,7 @@
 		"download": "0x12A000+0xA6000",
 		"calibration": "0x1D0000+0x1000",
 		"net": "0x1D1000+0x1000",
+		"tlv": "0x1D2000+0x1000",
 		"kvs": "0x1D3000+0x8000",
 		"userdata": "0x1DB000+0x25000"
 	},

boards/_base/beken-7231q.json

@@ -0,0 +1,19 @@
+{
+	"build": {
+		"family": "BK7231Q",
+		"bkboot_version": "bk7231q"
+	},
+	"flash": {
+		"bootloader": "0x000000+0x11000",
+		"app": "0x011000+0x121000",
+		"download": "0x132000+0xA6000",
+		"kvs": "0x1D8000+0x8000",
+		"calibration": "0x1E0000+0x1000",
+		"tlv": "0x1E1000+0x1000",
+		"net": "0x1E2000+0x1000",
+		"userdata": "0x1E3000+0x1D000"
+	},
+	"upload": {
+		"speed": 460800
+	}
+}

boards/_base/beken-7231t-tuya.json

@@ -1,9 +0,0 @@
-{
-	"build": {
-		"bkcrypt_coeffs": "510fb093a3cbeadc5993a17ec7adeb03",
-		"bkboot_version": "1.0.5-bk7231s"
-	},
-	"flash": {
-		"tuya": "0x1ED000+0x13000"
-	}
-}

boards/_base/beken-7231t.json

@@ -1,10 +1,7 @@
 {
 	"build": {
-		"family": "BK7231U",
-		"ldscript": "bk7231_bsp.ld",
-		"bkboot_version": "1.0.8-bk7231u",
-		"bkoffset_app": "0x10000",
-		"bkrbl_size_app": "0x108700"
+		"family": "BK7231T",
+		"bkboot_version": "1.0.5-bk7231s"
 	},
 	"flash": {
 		"bootloader": "0x000000+0x11000",
@@ -12,11 +9,11 @@
 		"download": "0x132000+0xA6000",
 		"kvs": "0x1D8000+0x8000",
 		"calibration": "0x1E0000+0x1000",
+		"tlv": "0x1E1000+0x1000",
 		"net": "0x1E2000+0x1000",
 		"userdata": "0x1E3000+0x1D000"
 	},
 	"upload": {
-		"maximum_size": 1083136,
 		"speed": 921600
 	},
 	"connectivity": [

boards/_base/ic/bk7231q-qfn40.json

@@ -0,0 +1,170 @@
+{
+	"pcb": {
+		"ic": {
+			"11": {
+				"C_NAME": "GPIO30",
+				"GPIO": "P30",
+				"IRQ": null,
+				"USB": "DN"
+			},
+			"12": {
+				"C_NAME": "GPIO29",
+				"GPIO": "P29",
+				"IRQ": null,
+				"USB": "DP"
+			},
+			"14": {
+				"C_NAME": "GPIO6",
+				"GPIO": "P6",
+				"IRQ": null,
+				"PWM": 0
+			},
+			"15": {
+				"C_NAME": "GPIO7",
+				"GPIO": "P7",
+				"IRQ": null,
+				"PWM": 1
+			},
+			"16": {
+				"C_NAME": "GPIO8",
+				"GPIO": "P8",
+				"IRQ": null,
+				"PWM": 2
+			},
+			"17": {
+				"C_NAME": "GPIO17",
+				"GPIO": "P17",
+				"IRQ": null,
+				"SD": "D1",
+				"SPI": "MISO"
+			},
+			"18": {
+				"C_NAME": "GPIO16",
+				"GPIO": "P16",
+				"IRQ": null,
+				"SD": "D0",
+				"SPI": "MOSI"
+			},
+			"19": {
+				"C_NAME": "GPIO14",
+				"GPIO": "P14",
+				"IRQ": null,
+				"SD": "CLK",
+				"SPI": "SCK"
+			},
+			"20": {
+				"C_NAME": "GPIO15",
+				"GPIO": "P15",
+				"IRQ": null,
+				"SD": "CMD",
+				"SPI": "CS"
+			},
+			"21": {
+				"C_NAME": "GPIO19",
+				"GPIO": "P19",
+				"IRQ": null,
+				"SD": "D3",
+				"PWM": 5
+			},
+			"22": {
+				"C_NAME": "GPIO18",
+				"GPIO": "P18",
+				"IRQ": null,
+				"SD": "D2",
+				"PWM": 4
+			},
+			"23": {
+				"IO": "I",
+				"CTRL": "TEST"
+			},
+			"24": {
+				"C_NAME": "GPIO9",
+				"GPIO": "P9",
+				"IRQ": null,
+				"PWM": 3
+			},
+			"25": {
+				"C_NAME": "GPIO10",
+				"GPIO": "P10",
+				"IRQ": null,
+				"UART": "1_RX"
+			},
+			"26": {
+				"C_NAME": "GPIO11",
+				"GPIO": "P11",
+				"IRQ": null,
+				"UART": "1_TX"
+			},
+			"27": {
+				"C_NAME": "GPIO1",
+				"GPIO": "P1",
+				"IRQ": null,
+				"UART": "2_RX",
+				"I2C": "2_SDA"
+			},
+			"28": {
+				"C_NAME": "GPIO0",
+				"GPIO": "P0",
+				"IRQ": null,
+				"UART": "2_TX",
+				"I2C": "2_SCL"
+			},
+			"29": {
+				"C_NAME": "GPIO20",
+				"GPIO": "P20",
+				"IRQ": null,
+				"I2C": "1_SCL",
+				"JTAG": "TCK",
+				"FLASH": "FSCK"
+			},
+			"30": {
+				"C_NAME": "GPIO21",
+				"GPIO": "P21",
+				"IRQ": null,
+				"I2C": "1_SDA",
+				"JTAG": "TMS",
+				"FLASH": "^FCS"
+			},
+			"31": {
+				"C_NAME": "GPIO22",
+				"GPIO": "P22",
+				"IRQ": null,
+				"JTAG": "TDI",
+				"FLASH": "FSI"
+			},
+			"32": {
+				"C_NAME": "GPIO23",
+				"GPIO": "P23",
+				"IRQ": null,
+				"ADC": 3,
+				"JTAG": "TDO",
+				"FLASH": "FSO"
+			},
+			"33": {
+				"C_NAME": "GPIO25",
+				"GPIO": "P25",
+				"IRQ": null
+			},
+			"34": {
+				"C_NAME": "GPIO28",
+				"GPIO": "P28",
+				"IRQ": null
+			},
+			"35": {
+				"C_NAME": "GPIO4",
+				"GPIO": "P4",
+				"IRQ": null,
+				"ADC": 1,
+				"I2S": "DIN"
+			},
+			"36": {
+				"IO": "I",
+				"CTRL": "CODE"
+			},
+			"37": {
+				"IO": "I",
+				"CTRL": "CEN"
+			}
+		}
+	}
+}

boards/_base/ic/bk7252-qfn68.json

@@ -103,7 +103,7 @@
 				"C_NAME": "GPIO19",
 				"GPIO": "P19",
 				"IRQ": null,
-				"SD": "D1"
+				"SD": "D3"
 			},
 			"31": {
 				"C_NAME": "GPIO17",

boards/_base/pcb/bw12.json

@@ -2,14 +2,11 @@
 	"pcb": {
 		"templates": [
 			"esp12s",
-			"esp12s-shield",
-			"rf-16mm-type1"
+			"pcb-black",
+			"rf-type1"
 		],
 		"vars": {
-			"MASK_PRESET": "mask_black",
-			"TRACE_COLOR": "#FAFD9D",
-			"SILK_COLOR": "white",
-			"PINTYPE_VERT": "pin_vert_2mm_cast_nohole"
+			"TRACE_COLOR": "#FAFD9D"
 		},
 		"pinout_hidden": "I2S,TRIG,WAKE,CTS,RTS,SD",
 		"pinout": {

boards/_base/pcb/bw15.json

@@ -3,13 +3,12 @@
 		"templates": [
 			"esp12s",
 			"esp12s-shield",
-			"rf-16mm-type1"
+			"rf-type1"
 		],
 		"vars": {
 			"MASK_PRESET": "mask_black",
 			"TRACE_COLOR": "#FAFD9D",
-			"SILK_COLOR": "white",
-			"PINTYPE_VERT": "pin_vert_2mm_cast_nohole"
+			"SILK_COLOR": "white"
 		},
 		"pinout_hidden": "I2S,TRIG,WAKE,CTS,RTS,SD",
 		"pinout": {

boards/_base/pcb/cb1s-test.json

@@ -0,0 +1,69 @@
+{
+	"pcb": {
+		"scale": 10,
+		"test_pads": {
+			"TSCK": "cb1s.back.sck.anchor",
+			"TCSN": "cb1s.back.csn.anchor",
+			"TSI": "cb1s.back.si.anchor",
+			"TSO": "cb1s.back.so.anchor"
+		},
+		"back": [
+			{
+				"name": "test_pad_1mm",
+				"pos": "2.66,14.4"
+			},
+			{
+				"name": "test_pad_1mm",
+				"pos": "2.66,15.9"
+			},
+			{
+				"name": "test_pad_1mm",
+				"pos": "2.66,17.4"
+			},
+			{
+				"name": "test_pad_1mm",
+				"pos": "2.66,18.9"
+			},
+			{
+				"id": "sck",
+				"name": "label_line_down",
+				"pos": "3.5,14.3",
+				"vars": {
+					"DIR": "right",
+					"W": 1.0,
+					"H": 0
+				}
+			},
+			{
+				"id": "csn",
+				"name": "label_line_down",
+				"pos": "3.5,15.8",
+				"vars": {
+					"DIR": "right",
+					"W": 1.0,
+					"H": 0
+				}
+			},
+			{
+				"id": "si",
+				"name": "label_line_down",
+				"pos": "3.5,17.3",
+				"vars": {
+					"DIR": "right",
+					"W": 1.0,
+					"H": 0
+				}
+			},
+			{
+				"id": "so",
+				"name": "label_line_down",
+				"pos": "3.5,18.8",
+				"vars": {
+					"DIR": "right",
+					"W": 1.0,
+					"H": 0
+				}
+			}
+		]
+	}
+}

boards/_base/pcb/cb1s.json

@@ -0,0 +1,101 @@
+{
+	"pcb": {
+		"templates": [
+			"tuya1",
+			"pcb-blue-light",
+			"tuya-16x24",
+			"rf-type1"
+		],
+		"scale": 15,
+		"pinout_hidden": "I2S,TRIG,WAKE,CTS,RTS,SD",
+		"pinout": {
+			"1": {
+				"PWR": "VCC5"
+			},
+			"2": {
+				"IC": 27,
+				"ARD": "D0"
+			},
+			"3": {
+				"IC": 26,
+				"ARD": "D1"
+			},
+			"4": {
+				"PWR": 3.3
+			},
+			"5": {
+				"GND": null
+			},
+			"6": {
+				"IC": 22,
+				"ARD": "D2"
+			},
+			"7": {
+				"IC": 23,
+				"ARD": "D3"
+			},
+			"8": {
+				"IC": 29,
+				"ARD": "D4"
+			},
+			"9": {
+				"IC": 25,
+				"ARD": "D5"
+			},
+			"10": {
+				"IC": 24,
+				"ARD": "D6"
+			},
+			"11": {
+				"IC": 28,
+				"ARD": "D7"
+			},
+			"12": {
+				"IC": 16,
+				"ARD": "D8"
+			},
+			"13": {
+				"IC": 15,
+				"ARD": "D9"
+			},
+			"14": {
+				"GND": null
+			},
+			"15": {
+				"GND": null
+			},
+			"16": {
+				"IC": 21
+			},
+			"17": {
+				"IC": 17,
+				"ARD": [
+					"D10",
+					"A0"
+				]
+			},
+			"18": {
+				"GND": null
+			},
+			"TSCK": {
+				"IC": 20,
+				"ARD": "D11"
+			},
+			"TCSN": {
+				"IC": 19,
+				"ARD": "D12"
+			},
+			"TSO": {
+				"IC": 17,
+				"ARD": [
+					"D10",
+					"A0"
+				]
+			},
+			"TSI": {
+				"IC": 18,
+				"ARD": "D13"
+			}
+		}
+	}
+}

boards/_base/pcb/cb2l-test.json

@@ -10,26 +10,12 @@
 			"TCSN": "cb2l.back.f_csn.anchor"
 		},
 		"back": [
-			{
-				"type": "rect",
-				"pos": "0,0",
-				"size": "15,17.3",
-				"preset": "${MASK_PRESET}"
-			},
-			{
-				"name": "pins_horz7_2mm_0.7mm",
-				"pos": "1.15,17.3",
-				"vars": {
-					"PINTYPE": "${PINTYPE_HORZ}",
-					"PINDIR": "down"
-				}
-			},
 			{
 				"name": "test_pad_1mm",
 				"pos": "1.5,7.5"
 			},
 			{
-				"name": "label_line_2mm_down",
+				"name": "label_line_down",
 				"pos": "0.4,4.7",
 				"vars": {
 					"DIR": "right",
@@ -51,7 +37,7 @@
 			},
 			{
 				"id": "u2_txd",
-				"name": "label_line_2mm_up",
+				"name": "label_line_up",
 				"pos": "2.2,5.1",
 				"vars": {
 					"DIR": "left",
@@ -65,7 +51,7 @@
 			},
 			{
 				"id": "u1_txd",
-				"name": "label_line_2mm_up",
+				"name": "label_line_up",
 				"pos": "4.0,5.1",
 				"vars": {
 					"DIR": "left",
@@ -79,7 +65,7 @@
 			},
 			{
 				"id": "gnd",
-				"name": "label_line_2mm_up",
+				"name": "label_line_up",
 				"pos": "9.2,5.1",
 				"vars": {
 					"DIR": "left",
@@ -93,7 +79,7 @@
 			},
 			{
 				"id": "rst",
-				"name": "label_line_2mm_up",
+				"name": "label_line_up",
 				"pos": "2.2,9.9",
 				"vars": {
 					"DIR": "left",
@@ -107,7 +93,7 @@
 			},
 			{
 				"id": "f_csn",
-				"name": "label_line_2mm_down",
+				"name": "label_line_down",
 				"pos": "2.2,12.8",
 				"vars": {
 					"DIR": "left",

boards/_base/pcb/cb2l.json

@@ -2,15 +2,9 @@
 	"pcb": {
 		"templates": [
 			"tuya2l",
-			"rf-15mm-type1",
-			"tuya2l-shield"
+			"pcb-white",
+			"rf-type1"
 		],
-		"vars": {
-			"MASK_PRESET": "mask_white",
-			"TRACE_COLOR": "#E0E0E0",
-			"SILK_COLOR": "black",
-			"PINTYPE_HORZ": "pin_horz_2mm_cast_hole"
-		},
 		"pinout_hidden": "I2S,I2C,JTAG,FLASH",
 		"pinout": {
 			"1": {

boards/_base/pcb/cb2s-test.json

@@ -15,7 +15,7 @@
 			},
 			{
 				"id": "u2_txd",
-				"name": "label_line_2mm_up",
+				"name": "label_line_up",
 				"pos": "6.7,6.1",
 				"vars": {
 					"DIR": "left",
@@ -29,7 +29,7 @@
 			},
 			{
 				"id": "u2_rxd",
-				"name": "label_line_2mm_up",
+				"name": "label_line_up",
 				"pos": "6.2,8.1",
 				"vars": {
 					"DIR": "left",
@@ -43,7 +43,7 @@
 			},
 			{
 				"id": "csn",
-				"name": "label_line_2mm_up",
+				"name": "label_line_up",
 				"pos": "4.2,11.1",
 				"vars": {
 					"DIR": "left",

boards/_base/pcb/cb2s.json

@@ -2,14 +2,9 @@
 	"pcb": {
 		"templates": [
 			"tuya2",
-			"rf-15mm-type1",
-			"tuya2-shield"
+			"pcb-blue-light",
+			"rf-type1"
 		],
-		"vars": {
-			"MASK_PRESET": "mask_blue_light",
-			"TRACE_COLOR": "#58839B",
-			"SILK_COLOR": "white"
-		},
 		"pinout_hidden": "I2S,JTAG,FLASH",
 		"pinout": {
 			"1": {

boards/_base/pcb/cb3l.json

@@ -2,16 +2,12 @@
 	"pcb": {
 		"templates": [
 			"esp12s",
-			"esp12e-shield",
+			"pcb-white",
 			"tuya-16x24",
-			"rf-16mm-type1"
+			"rf-type1"
 		],
 		"vars": {
-			"MASK_PRESET": "mask_blue_light",
-			"TRACE_COLOR": "#58839B",
-			"SILK_COLOR": "white",
-			"PINTYPE_VERT": "pin_vert_2mm_cast_hole",
-			"PINTYPE_HORZ": "pin_horz_2mm_cast_hole"
+			"PINHOLE": 1
 		},
 		"pinout_hidden": "I2S,SD,SPI,I2C,JTAG,FLASH",
 		"pinout": {

boards/_base/pcb/cb3s.json

@@ -2,16 +2,12 @@
 	"pcb": {
 		"templates": [
 			"esp12e-22",
-			"esp12e-shield-nohole",
+			"pcb-blue-light",
 			"tuya-16x24",
-			"rf-16mm-type1"
+			"rf-type1"
 		],
 		"vars": {
-			"MASK_PRESET": "mask_blue_light",
-			"TRACE_COLOR": "#58839B",
-			"SILK_COLOR": "white",
-			"PINTYPE_VERT": "pin_vert_2mm_cast_nohole",
-			"PINTYPE_HORZ": "pin_horz_2mm_cast_nohole"
+			"PINHOLE": 0
 		},
 		"pinout_hidden": "I2S,SD,SPI,SCL2",
 		"pinout": {

boards/_base/pcb/cb3se.json

@@ -2,16 +2,12 @@
 	"pcb": {
 		"templates": [
 			"esp12e-22",
-			"esp12e-shield-nohole",
+			"pcb-blue-light",
 			"tuya-16x24",
-			"rf-16mm-type1"
+			"rf-type1"
 		],
 		"vars": {
-			"MASK_PRESET": "mask_blue_light",
-			"TRACE_COLOR": "#58839B",
-			"SILK_COLOR": "white",
-			"PINTYPE_VERT": "pin_vert_2mm_cast_nohole",
-			"PINTYPE_HORZ": "pin_horz_2mm_cast_nohole"
+			"PINHOLE": 0
 		},
 		"pinout_hidden": "I2S,SD,JTAG,FLASH,SCL1",
 		"pinout": {

boards/_base/pcb/cblc5-test.json

@@ -0,0 +1,104 @@
+{
+	"pcb": {
+		"test_pads": {
+			"TRST": "cblc5.back.rst.anchor",
+			"TRX1": "cblc5.back.r1.anchor",
+			"TTX1": "cblc5.back.t1.anchor",
+			"TRX2": "cblc5.back.r2.anchor",
+			"TTX2": "cblc5.back.t2.anchor",
+			"TCSN": "cblc5.back.csn.anchor"
+		},
+		"back": [
+			{
+				"name": "test_pad_1mm",
+				"pos": "1.1,1.1"
+			},
+			{
+				"id": "t1",
+				"name": "label_line_up",
+				"pos": "1.1,0.6",
+				"vars": {
+					"DIR": "right",
+					"RASTER": 2,
+					"W": 3.8,
+					"H": 1.4
+				}
+			},
+			{
+				"name": "test_pad_1mm",
+				"pos": "0.8,3.3"
+			},
+			{
+				"id": "r1",
+				"name": "label_line_up",
+				"pos": "0.8,2.8",
+				"vars": {
+					"DIR": "right",
+					"RASTER": 2,
+					"W": 4.1,
+					"H": 1.6
+				}
+			},
+			{
+				"name": "test_pad_1mm",
+				"pos": "2.4,4.1"
+			},
+			{
+				"id": "r2",
+				"name": "label_line_up",
+				"pos": "2.4,3.6",
+				"vars": {
+					"DIR": "right",
+					"RASTER": 2,
+					"W": 2.5,
+					"H": 0.4
+				}
+			},
+			{
+				"name": "test_pad_1mm",
+				"pos": "3.9,4.1"
+			},
+			{
+				"id": "t2",
+				"name": "label_line_down",
+				"pos": "3.9,4.6",
+				"vars": {
+					"DIR": "right",
+					"RASTER": 2,
+					"W": 1,
+					"H": 0.4
+				}
+			},
+			{
+				"name": "test_pad_1mm",
+				"pos": "1.2,4.9"
+			},
+			{
+				"name": "test_pad_1mm",
+				"pos": "1.7,7.0"
+			},
+			{
+				"id": "rst",
+				"name": "label_line_down",
+				"pos": "1.2,5.4",
+				"vars": {
+					"DIR": "right",
+					"RASTER": 2,
+					"W": 3.7,
+					"H": 1.6
+				}
+			},
+			{
+				"id": "csn",
+				"name": "label_line_down",
+				"pos": "1.7,7.5",
+				"vars": {
+					"DIR": "right",
+					"RASTER": 2,
+					"W": 3.2,
+					"H": 1.5
+				}
+			}
+		]
+	}
+}

boards/_base/pcb/cblc5.json

@@ -0,0 +1,78 @@
+{
+	"pcb": {
+		"templates": [
+			"tuyalc5",
+			"pcb-white"
+		],
+		"pinout_hidden": "I2S,JTAG,FLASH,SDA1",
+		"pinout": {
+			"1": {
+				"CTRL": "ANT"
+			},
+			"2": {
+				"GND": null
+			},
+			"3": {
+				"IC": 16,
+				"ARD": "D0"
+			},
+			"4": {
+				"IC": 15,
+				"ARD": "D2"
+			},
+			"5": {
+				"IC": 22,
+				"ARD": "D1"
+			},
+			"6": {
+				"PWR": 3.3
+			},
+			"TRST": {
+				"IC": 21
+			},
+			"TRX1": {
+				"IC": 26,
+				"ARD": "D4"
+			},
+			"TTX1": {
+				"IC": 27,
+				"ARD": "D3"
+			},
+			"TRX2": {
+				"IC": 28,
+				"ARD": "D5"
+			},
+			"TTX2": {
+				"IC": 29,
+				"ARD": "D6"
+			},
+			"TCSN": {
+				"IC": 19,
+				"ARD": "D7"
+			}
+		},
+		"front": [
+			{
+				"name": "chip",
+				"pos": "2.7,3.8",
+				"vars": {
+					"W": 5,
+					"POS": 1
+				}
+			},
+			{
+				"name": "osc",
+				"pos": "2.5,0.5"
+			},
+			{
+				"type": "text",
+				"pos": "0.7,4.2",
+				"text": "${SYMBOL}",
+				"font_size": 1.2,
+				"fill": {
+					"color": "${SILK_COLOR}"
+				}
+			}
+		]
+	}
+}

boards/_base/pcb/cbu-test.json

@@ -0,0 +1,30 @@
+{
+	"pcb": {
+		"test_pads": {
+			"TCSN": "cbu.back.csn.anchor"
+		},
+		"back": [
+			{
+				"type": "rect",
+				"pos": "6.3,11.6",
+				"size": "2.9,2.9",
+				"preset": "copper1"
+			},
+			{
+				"id": "csn",
+				"name": "label_line_up",
+				"pos": "3.7,13.5",
+				"vars": {
+					"DIR": "left",
+					"RASTER": 2,
+					"W": 0,
+					"H": 0
+				}
+			},
+			{
+				"name": "test_pad_1mm",
+				"pos": "4.4,13.4"
+			}
+		]
+	}
+}

boards/_base/pcb/cbu.json

@@ -0,0 +1,100 @@
+{
+	"pcb": {
+		"templates": [
+			"tuyau",
+			"pcb-white",
+			"rf-type1"
+		],
+		"pinout_hidden": "I2S,USB,SD,FLASH",
+		"pinout": {
+			"1": {
+				"IC": 11,
+				"ARD": "D0"
+			},
+			"2": {
+				"IC": 12,
+				"ARD": "D1"
+			},
+			"3": {
+				"IC": 20,
+				"ARD": "D2"
+			},
+			"4": {
+				"IC": 18,
+				"ARD": "D3"
+			},
+			"5": {
+				"IC": 17,
+				"ARD": [
+					"D4",
+					"A0"
+				]
+			},
+			"6": {
+				"IC": 28,
+				"ARD": "D5"
+			},
+			"7": {
+				"IC": 29,
+				"ARD": "D6"
+			},
+			"8": {
+				"IC": 24,
+				"ARD": "D7"
+			},
+			"9": {
+				"IC": 23,
+				"ARD": "D8"
+			},
+			"10": {
+				"IC": 22,
+				"ARD": "D9"
+			},
+			"11": {
+				"IC": 15,
+				"ARD": "D10"
+			},
+			"12": {
+				"IC": 16,
+				"ARD": "D11"
+			},
+			"13": {
+				"GND": null
+			},
+			"14": {
+				"PWR": 3.3
+			},
+			"15": {
+				"IC": 27,
+				"ARD": "D12"
+			},
+			"16": {
+				"IC": 26,
+				"ARD": "D13"
+			},
+			"17": {
+				"IC": 10,
+				"ARD": "D14"
+			},
+			"18": {
+				"IC": 21
+			},
+			"19": {
+				"IC": 25,
+				"ARD": "D15"
+			},
+			"20": {
+				"IC": 14,
+				"ARD": "D16"
+			},
+			"21": {
+				"IC": 13,
+				"ARD": "D17"
+			},
+			"TCSN": {
+				"IC": 19,
+				"ARD": "D18"
+			}
+		}
+	}
+}

boards/_base/pcb/lsc-lma35.json

@@ -2,15 +2,9 @@
 	"pcb": {
 		"templates": [
 			"custom-20x24-22",
-			"rf-20mm-type1"
+			"pcb-blue-light",
+			"rf-type1"
 		],
-		"vars": {
-			"MASK_PRESET": "mask_blue_light",
-			"TRACE_COLOR": "#58839B",
-			"SILK_COLOR": "white",
-			"PINTYPE_VERT": "pin_vert_2mm_cast_nohole",
-			"PINTYPE_HORZ": "pin_horz_2mm_cast_nohole"
-		},
 		"pinout_hidden": "I2S,JTAG,FLASH,SD,SPI,SDA1",
 		"pinout": {
 			"1": {

boards/_base/pcb/t102.json

@@ -0,0 +1,55 @@
+{
+	"pcb": {
+		"templates": [
+			"tuya2",
+			"pcb-black",
+			"rf-type1"
+		],
+		"scale": 10.5,
+		"pinout_hidden": "I2S,TRIG,WAKE,CTS,RTS,SD,SPI",
+		"pinout": {
+			"1": {
+				"PWR": 3.3
+			},
+			"2": {
+				"IC": 17,
+				"ARD": "D0"
+			},
+			"3": {
+				"GND": null
+			},
+			"4": {
+				"IC": 16,
+				"ARD": "D1"
+			},
+			"5": {
+				"IC": 29,
+				"ARD": "D5"
+			},
+			"6": {
+				"IC": 28,
+				"ARD": "D2"
+			},
+			"7": {
+				"IC": 32,
+				"ARD": "D6"
+			},
+			"8": {
+				"IC": 1,
+				"ARD": "D3"
+			},
+			"9": {
+				"IC": 13,
+				"ARD": "D7"
+			},
+			"10": {
+				"IC": 2,
+				"ARD": "D4"
+			},
+			"11": {
+				"IC": 14,
+				"ARD": "D8"
+			}
+		}
+	}
+}

boards/_base/pcb/t103.json

@@ -0,0 +1,79 @@
+{
+	"pcb": {
+		"templates": [
+			"esp12s",
+			"pcb-white",
+			"tuya-16x24",
+			"rf-type1"
+		],
+		"vars": {
+			"PINHOLE": 1
+		},
+		"pinout_hidden": "I2S,TRIG,WAKE,CTS,RTS,SD",
+		"pinout": {
+			"1": {
+				"NC": null
+			},
+			"2": {
+				"IC": 27,
+				"ARD": "A1"
+			},
+			"3": {
+				"IC": 12
+			},
+			"4": {
+				"IC": 30,
+				"ARD": [
+					"D0",
+					"A0"
+				]
+			},
+			"5": {
+				"IC": 13,
+				"ARD": "D1"
+			},
+			"6": {
+				"IC": 14,
+				"ARD": "D2"
+			},
+			"7": {
+				"IC": 16,
+				"ARD": "D3"
+			},
+			"8": {
+				"PWR": 3.3
+			},
+			"9": {
+				"GND": null
+			},
+			"10": {
+				"IC": 31,
+				"ARD": "D4"
+			},
+			"11": {
+				"IC": 2,
+				"ARD": "D5"
+			},
+			"12": {
+				"IC": 1,
+				"ARD": "D6"
+			},
+			"13": {
+				"IC": 28,
+				"ARD": "D7"
+			},
+			"14": {
+				"IC": 17,
+				"ARD": "D8"
+			},
+			"15": {
+				"IC": 29,
+				"ARD": "D9"
+			},
+			"16": {
+				"IC": 32,
+				"ARD": "D10"
+			}
+		}
+	}
+}

boards/_base/pcb/wa2-test.json

@@ -0,0 +1,143 @@
+{
+	"pcb": {
+		"test_pads": {
+			"TTEST": "wa2.back.test.anchor",
+			"TTX2": "wa2.back.2tx.anchor",
+			"TGND": "wa2.back.gnd.anchor",
+			"TSCK": "wa2.back.sck.anchor",
+			"TCSN": "wa2.back.csn.anchor",
+			"TSI": "wa2.back.si.anchor",
+			"TSO": "wa2.back.so.anchor",
+			"TP4": "wa2.back.p4.anchor",
+			"TVCC": "wa2.back.vbat.anchor"
+		},
+		"back": [
+			{
+				"name": "test_pad_1mm",
+				"pos": "2.6,6.2"
+			},
+			{
+				"id": "sck",
+				"name": "label_line_up",
+				"pos": "2.6,5.4",
+				"vars": {
+					"DIR": "left",
+					"W": 1.3,
+					"H": 2
+				}
+			},
+			{
+				"name": "test_pad_1mm",
+				"pos": "4.6,6.2"
+			},
+			{
+				"id": "so",
+				"name": "label_line_up",
+				"pos": "4.6,5.4",
+				"vars": {
+					"DIR": "left",
+					"W": 3.3,
+					"H": 4
+				}
+			},
+			{
+				"name": "test_pad_1mm",
+				"pos": "7.0,6.2"
+			},
+			{
+				"id": "p4",
+				"name": "label_line_up",
+				"pos": "7.0,5.4",
+				"vars": {
+					"DIR": "right",
+					"W": 0,
+					"H": 4
+				}
+			},
+			{
+				"name": "test_pad_1mm",
+				"pos": "3.0,8.3"
+			},
+			{
+				"id": "csn",
+				"name": "label_line_up",
+				"pos": "2.2,8.4",
+				"vars": {
+					"DIR": "left",
+					"W": 0.9,
+					"H": 0
+				}
+			},
+			{
+				"name": "test_pad_1mm",
+				"pos": "5.2,8.8"
+			},
+			{
+				"id": "si",
+				"name": "label_line_up",
+				"pos": "6.0,8.9",
+				"vars": {
+					"DIR": "right",
+					"W": 1,
+					"H": 0
+				}
+			},
+			{
+				"name": "test_pad_1mm",
+				"pos": "2.1,11.6"
+			},
+			{
+				"id": "2tx",
+				"name": "label_line_up",
+				"pos": "1.3,11.7",
+				"vars": {
+					"DIR": "left",
+					"W": 0,
+					"H": 0
+				}
+			},
+			{
+				"name": "test_pad_1mm",
+				"pos": "4.3,11.6"
+			},
+			{
+				"id": "test",
+				"name": "label_line_up",
+				"pos": "5.1,11.7",
+				"vars": {
+					"DIR": "right",
+					"W": 1.9,
+					"H": 0
+				}
+			},
+			{
+				"name": "test_pad_1mm",
+				"pos": "2.5,14.5"
+			},
+			{
+				"id": "vbat",
+				"name": "label_line_up",
+				"pos": "1.7,14.6",
+				"vars": {
+					"DIR": "left",
+					"W": 0.4,
+					"H": 0
+				}
+			},
+			{
+				"name": "test_pad_1mm",
+				"pos": "4.8,14.5"
+			},
+			{
+				"id": "gnd",
+				"name": "label_line_up",
+				"pos": "5.6,14.6",
+				"vars": {
+					"DIR": "right",
+					"W": 1.4,
+					"H": 0
+				}
+			}
+		]
+	}
+}

boards/_base/pcb/wa2.json

@@ -0,0 +1,93 @@
+{
+	"pcb": {
+		"scale": 10.5,
+		"templates": [
+			"tuya2",
+			"pcb-blue-light",
+			"rf-type1"
+		],
+		"pinout_hidden": "I2S,SD",
+		"pinout": {
+			"1": {
+				"PWR": 3.3
+			},
+			"2": {
+				"IC": 16,
+				"ARD": "D0"
+			},
+			"3": {
+				"GND": null
+			},
+			"4": {
+				"IC": 15,
+				"ARD": "D1"
+			},
+			"5": {
+				"IC": 25,
+				"ARD": "D4"
+			},
+			"6": {
+				"IC": 14,
+				"ARD": "D2"
+			},
+			"7": {
+				"IC": 26,
+				"ARD": "D5"
+			},
+			"8": {
+				"IC": 32,
+				"ARD": [
+					"D3",
+					"A0"
+				]
+			},
+			"9": {
+				"IC": 22,
+				"ARD": "D6"
+			},
+			"10": {
+				"IC": 37
+			},
+			"11": {
+				"IC": 21,
+				"ARD": "D7"
+			},
+			"TSCK": {
+				"IC": 29,
+				"ARD": "D8"
+			},
+			"TP4": {
+				"IC": 35,
+				"ARD": "D9"
+			},
+			"TTEST": {
+				"IC": 23
+			},
+			"TTX2": {
+				"IC": 28,
+				"ARD": "D10"
+			},
+			"TCSN": {
+				"IC": 30,
+				"ARD": "D11"
+			},
+			"TSI": {
+				"IC": 31,
+				"ARD": "D12"
+			},
+			"TSO": {
+				"IC": 32,
+				"ARD": [
+					"D3",
+					"A0"
+				]
+			},
+			"TVCC": {
+				"PWR": 3.3
+			},
+			"TGND": {
+				"GND": null
+			}
+		}
+	}
+}

boards/_base/pcb/wb1s.json

@@ -0,0 +1,99 @@
+{
+	"pcb": {
+		"templates": [
+			"tuya1",
+			"tuya1s",
+			"pcb-blue-light",
+			"tuya-16x24",
+			"rf-type1"
+		],
+		"scale": 15,
+		"pinout_hidden": "I2S,TRIG,WAKE,CTS,RTS,SD",
+		"pinout": {
+			"1": {
+				"PWR": "VCC5"
+			},
+			"2": {
+				"IC": 27,
+				"ARD": "D0"
+			},
+			"3": {
+				"IC": 26,
+				"ARD": "D1"
+			},
+			"4": {
+				"PWR": 3.3
+			},
+			"5": {
+				"GND": null
+			},
+			"6": {
+				"IC": 15,
+				"ARD": "D2"
+			},
+			"7": {
+				"IC": 16,
+				"ARD": "D3"
+			},
+			"8": {
+				"IC": 29,
+				"ARD": "D4"
+			},
+			"9": {
+				"IC": 24,
+				"ARD": "D5"
+			},
+			"10": {
+				"IC": 23,
+				"ARD": "D6"
+			},
+			"11": {
+				"IC": 28,
+				"ARD": "D7"
+			},
+			"12": {
+				"IC": 25,
+				"ARD": "D8"
+			},
+			"13": {
+				"IC": 22,
+				"ARD": "D9"
+			},
+			"14": {
+				"GND": null
+			},
+			"15": {
+				"GND": null
+			},
+			"16": {
+				"IC": 21
+			},
+			"17": {
+				"IC": 17,
+				"ARD": [
+					"D10",
+					"A0"
+				]
+			},
+			"18": {
+				"GND": null
+			},
+			"19": {
+				"IC": 17,
+				"ARD": [
+					"D10",
+					"A0"
+				]
+			},
+			"20": {
+				"IC": 18
+			},
+			"21": {
+				"IC": 19
+			},
+			"22": {
+				"IC": 20
+			}
+		}
+	}
+}

boards/_base/pcb/wb2l-m1-test.json

@@ -0,0 +1,16 @@
+{
+	"pcb": {
+		"test_pads": {
+			"TRST": "wb2l-m1.back.rst.anchor",
+			"TRX1": "wb2l-m1.back.u1_rxd.anchor",
+			"TTX1": "wb2l-m1.back.u1_txd.anchor",
+			"TRX2": "wb2l-m1.back.u2_rxd.anchor",
+			"TTX2": "wb2l-m1.back.u2_txd.anchor",
+			"TGND": "wb2l-m1.back.gnd.anchor",
+			"TSCK": "wb2l-m1.back.f_sck.anchor",
+			"TCSN": "wb2l-m1.back.f_csn.anchor",
+			"TSI": "wb2l-m1.back.f_si.anchor",
+			"TSO": "wb2l-m1.back.f_so.anchor"
+		}
+	}
+}

boards/_base/pcb/wb2l-test.json

@@ -14,26 +14,12 @@
 			"TSO": "wb2l.back.f_so.anchor"
 		},
 		"back": [
-			{
-				"type": "rect",
-				"pos": "0,0",
-				"size": "15,17.3",
-				"preset": "${MASK_PRESET}"
-			},
-			{
-				"name": "pins_horz7_2mm_0.7mm",
-				"pos": "1.15,17.3",
-				"vars": {
-					"PINTYPE": "${PINTYPE_HORZ}",
-					"PINDIR": "down"
-				}
-			},
 			{
 				"name": "test_pad_1mm",
 				"pos": "1.5,7.5"
 			},
 			{
-				"name": "label_line_2mm_down",
+				"name": "label_line_down",
 				"pos": "0.4,4.7",
 				"vars": {
 					"DIR": "right",
@@ -55,7 +41,7 @@
 			},
 			{
 				"id": "u1_rxd",
-				"name": "label_line_2mm_up",
+				"name": "label_line_up",
 				"pos": "2.2,5.1",
 				"vars": {
 					"DIR": "left",
@@ -69,7 +55,7 @@
 			},
 			{
 				"id": "u1_txd",
-				"name": "label_line_2mm_up",
+				"name": "label_line_up",
 				"pos": "4.0,5.1",
 				"vars": {
 					"DIR": "left",
@@ -83,7 +69,7 @@
 			},
 			{
 				"id": "u2_rxd",
-				"name": "label_line_2mm_up",
+				"name": "label_line_up",
 				"pos": "5.7,5.1",
 				"vars": {
 					"DIR": "left",
@@ -97,7 +83,7 @@
 			},
 			{
 				"id": "u2_txd",
-				"name": "label_line_2mm_up",
+				"name": "label_line_up",
 				"pos": "7.3,5.1",
 				"vars": {
 					"DIR": "left",
@@ -111,7 +97,7 @@
 			},
 			{
 				"id": "gnd",
-				"name": "label_line_2mm_up",
+				"name": "label_line_up",
 				"pos": "9.2,5.1",
 				"vars": {
 					"DIR": "left",
@@ -125,7 +111,7 @@
 			},
 			{
 				"id": "f_sck",
-				"name": "label_line_2mm_up",
+				"name": "label_line_up",
 				"pos": "2.2,9.9",
 				"vars": {
 					"DIR": "left",
@@ -139,7 +125,7 @@
 			},
 			{
 				"id": "f_csn",
-				"name": "label_line_2mm_down",
+				"name": "label_line_down",
 				"pos": "2.2,12.8",
 				"vars": {
 					"DIR": "left",
@@ -153,7 +139,7 @@
 			},
 			{
 				"id": "f_so",
-				"name": "label_line_2mm_down",
+				"name": "label_line_down",
 				"pos": "3.5,14.3",
 				"vars": {
 					"DIR": "left",
@@ -167,7 +153,7 @@
 			},
 			{
 				"id": "f_si",
-				"name": "label_line_2mm_down",
+				"name": "label_line_down",
 				"pos": "5.2,14.3",
 				"vars": {
 					"DIR": "left",

boards/_base/pcb/wb2l.json

@@ -2,15 +2,9 @@
 	"pcb": {
 		"templates": [
 			"tuya2l",
-			"rf-15mm-type1",
-			"tuya2l-shield"
+			"pcb-white",
+			"rf-type1"
 		],
-		"vars": {
-			"MASK_PRESET": "mask_white",
-			"TRACE_COLOR": "#E0E0E0",
-			"SILK_COLOR": "black",
-			"PINTYPE_HORZ": "pin_horz_2mm_cast_hole"
-		},
 		"pinout_hidden": "I2S",
 		"pinout": {
 			"1": {
@@ -43,7 +37,7 @@
 				"GND": null
 			},
 			"TRST": {
-				"CTRL": "^RST"
+				"IC": 21
 			},
 			"TRX1": {
 				"IC": 26,

boards/_base/pcb/wb2s-test.json

@@ -19,7 +19,7 @@
 			},
 			{
 				"id": "sck",
-				"name": "label_line_2mm_up",
+				"name": "label_line_up",
 				"pos": "2.6,5.4",
 				"vars": {
 					"DIR": "left",
@@ -33,7 +33,7 @@
 			},
 			{
 				"id": "pwm3",
-				"name": "label_line_2mm_up",
+				"name": "label_line_up",
 				"pos": "4.6,5.4",
 				"vars": {
 					"DIR": "left",
@@ -47,7 +47,7 @@
 			},
 			{
 				"id": "2rx",
-				"name": "label_line_2mm_up",
+				"name": "label_line_up",
 				"pos": "7.0,5.4",
 				"vars": {
 					"DIR": "right",
@@ -61,7 +61,7 @@
 			},
 			{
 				"id": "2tx",
-				"name": "label_line_2mm_up",
+				"name": "label_line_up",
 				"pos": "9.0,5.4",
 				"vars": {
 					"DIR": "right",
@@ -75,7 +75,7 @@
 			},
 			{
 				"id": "csn",
-				"name": "label_line_2mm_up",
+				"name": "label_line_up",
 				"pos": "2.2,8.4",
 				"vars": {
 					"DIR": "left",
@@ -89,7 +89,7 @@
 			},
 			{
 				"id": "si",
-				"name": "label_line_2mm_up",
+				"name": "label_line_up",
 				"pos": "6.0,8.9",
 				"vars": {
 					"DIR": "right",
@@ -103,7 +103,7 @@
 			},
 			{
 				"id": "adc_so",
-				"name": "label_line_2mm_up",
+				"name": "label_line_up",
 				"pos": "1.3,11.7",
 				"vars": {
 					"DIR": "left",
@@ -117,7 +117,7 @@
 			},
 			{
 				"id": "cen",
-				"name": "label_line_2mm_up",
+				"name": "label_line_up",
 				"pos": "5.1,11.7",
 				"vars": {
 					"DIR": "right",
@@ -131,7 +131,7 @@
 			},
 			{
 				"id": "vbat",
-				"name": "label_line_2mm_up",
+				"name": "label_line_up",
 				"pos": "1.7,14.6",
 				"vars": {
 					"DIR": "left",
@@ -145,7 +145,7 @@
 			},
 			{
 				"id": "gnd",
-				"name": "label_line_2mm_up",
+				"name": "label_line_up",
 				"pos": "5.6,14.6",
 				"vars": {
 					"DIR": "right",

boards/_base/pcb/wb2s.json

@@ -3,14 +3,9 @@
 		"scale": 10.5,
 		"templates": [
 			"tuya2",
-			"rf-15mm-type1",
-			"tuya2-shield"
+			"pcb-blue-light",
+			"rf-type1"
 		],
-		"vars": {
-			"MASK_PRESET": "mask_blue_light",
-			"TRACE_COLOR": "#58839B",
-			"SILK_COLOR": "white"
-		},
 		"pinout_hidden": "I2S,FLASH",
 		"pinout": {
 			"1": {

boards/_base/pcb/wb3l.json

@@ -2,16 +2,12 @@
 	"pcb": {
 		"templates": [
 			"esp12e-21",
-			"esp12e-shield-nohole",
+			"pcb-white",
 			"tuya-16x24",
-			"rf-16mm-type1"
+			"rf-type1"
 		],
 		"vars": {
-			"MASK_PRESET": "mask_white",
-			"TRACE_COLOR": "#E0E0E0",
-			"SILK_COLOR": "black",
-			"PINTYPE_VERT": "pin_vert_2mm_cast_nohole",
-			"PINTYPE_HORZ": "pin_horz_2mm_cast_nohole"
+			"PINHOLE": 0
 		},
 		"pinout_hidden": "I2S,SD,SPI",
 		"pinout": {

boards/_base/pcb/wb3s.json

@@ -2,16 +2,12 @@
 	"pcb": {
 		"templates": [
 			"esp12e-22",
-			"esp12e-shield-nohole",
+			"pcb-blue-light",
 			"tuya-16x24",
-			"rf-16mm-type1"
+			"rf-type1"
 		],
 		"vars": {
-			"MASK_PRESET": "mask_blue_light",
-			"TRACE_COLOR": "#58839B",
-			"SILK_COLOR": "white",
-			"PINTYPE_VERT": "pin_vert_2mm_cast_nohole",
-			"PINTYPE_HORZ": "pin_horz_2mm_cast_nohole"
+			"PINHOLE": 0
 		},
 		"pinout_hidden": "I2S,SD,SPI",
 		"pinout": {

boards/_base/pcb/wblc5-test.json

@@ -0,0 +1,152 @@
+{
+	"pcb": {
+		"test_pads": {
+			"TRST": "wblc5.back.cen.anchor",
+			"TRX1": "wblc5.back.r1.anchor",
+			"TTX1": "wblc5.back.t1.anchor",
+			"TRX2": "wblc5.back.r2.anchor",
+			"TTX2": "wblc5.back.t2.anchor",
+			"TSCK": "wblc5.back.tck.anchor",
+			"TCSN": "wblc5.back.tms.anchor",
+			"TSI": "wblc5.back.tdi.anchor",
+			"TSO": "wblc5.back.tdo.anchor"
+		},
+		"back": [
+			{
+				"name": "test_pad_1mm",
+				"pos": "0.7,1.1"
+			},
+			{
+				"id": "r1",
+				"name": "label_line_up",
+				"pos": "0.7,0.6",
+				"vars": {
+					"DIR": "right",
+					"RASTER": 2,
+					"W": 7.2,
+					"H": 5.1
+				}
+			},
+			{
+				"name": "test_pad_1mm",
+				"pos": "1.9,0.9"
+			},
+			{
+				"id": "t1",
+				"name": "label_line_up",
+				"pos": "1.9,0.4",
+				"vars": {
+					"DIR": "right",
+					"RASTER": 2,
+					"W": 5.9,
+					"H": 2.9
+				}
+			},
+			{
+				"name": "test_pad_1mm",
+				"pos": "7.8,0.8"
+			},
+			{
+				"id": "r2",
+				"name": "label_line_up",
+				"pos": "7.8,0.3",
+				"vars": {
+					"DIR": "right",
+					"RASTER": 2,
+					"W": 0,
+					"H": 0.8
+				}
+			},
+			{
+				"name": "test_pad_1mm",
+				"pos": "7.8,2.4"
+			},
+			{
+				"id": "t2",
+				"name": "label_line_up",
+				"pos": "7.8,1.9",
+				"vars": {
+					"DIR": "right",
+					"RASTER": 2,
+					"W": 0,
+					"H": 0.4
+				}
+			},
+			{
+				"name": "test_pad_1mm",
+				"pos": "1.3,4.2"
+			},
+			{
+				"id": "cen",
+				"name": "label_line_up",
+				"pos": "2.1,4.3",
+				"vars": {
+					"DIR": "right",
+					"RASTER": 2,
+					"W": 5.7,
+					"H": 0
+				}
+			},
+			{
+				"name": "test_pad_1mm",
+				"pos": "1.6,5.3"
+			},
+			{
+				"name": "test_pad_1mm",
+				"pos": "1.3,6.3"
+			},
+			{
+				"name": "test_pad_1mm",
+				"pos": "4.5,7.6"
+			},
+			{
+				"name": "test_pad_1mm",
+				"pos": "3.8,8.7"
+			},
+			{
+				"id": "tck",
+				"name": "label_line_down",
+				"pos": "1.6,5.8",
+				"vars": {
+					"DIR": "right",
+					"RASTER": 2,
+					"W": 6.2,
+					"H": 0.3
+				}
+			},
+			{
+				"id": "tms",
+				"name": "label_line_down",
+				"pos": "1.3,6.8",
+				"vars": {
+					"DIR": "right",
+					"RASTER": 2,
+					"W": 6.5,
+					"H": 1.3
+				}
+			},
+			{
+				"id": "tdi",
+				"name": "label_line_down",
+				"pos": "4.5,8.1",
+				"vars": {
+					"DIR": "right",
+					"RASTER": 2,
+					"W": 3.3,
+					"H": 2.0
+				}
+			},
+			{
+				"id": "tdo",
+				"name": "label_line_down",
+				"pos": "3.8,9.2",
+				"vars": {
+					"DIR": "right",
+					"RASTER": 2,
+					"W": 4,
+					"H": 2.9
+				}
+			}
+		]
+	}
+}

boards/_base/pcb/wblc5.json

@@ -0,0 +1,95 @@
+{
+	"pcb": {
+		"templates": [
+			"tuyalc5",
+			"pcb-white"
+		],
+		"pinout_hidden": "I2S",
+		"pinout": {
+			"1": {
+				"CTRL": "ANT"
+			},
+			"2": {
+				"GND": null
+			},
+			"3": {
+				"IC": 16,
+				"ARD": "D0"
+			},
+			"4": {
+				"IC": 15,
+				"ARD": "D2"
+			},
+			"5": {
+				"IC": 22,
+				"ARD": "D1"
+			},
+			"6": {
+				"PWR": 3.3
+			},
+			"TRST": {
+				"IC": 21
+			},
+			"TRX1": {
+				"IC": 26,
+				"ARD": "D3"
+			},
+			"TTX1": {
+				"IC": 27,
+				"ARD": "D4"
+			},
+			"TRX2": {
+				"IC": 28,
+				"ARD": "D5"
+			},
+			"TTX2": {
+				"IC": 29,
+				"ARD": "D6"
+			},
+			"TSCK": {
+				"IC": 20,
+				"ARD": "D7"
+			},
+			"TCSN": {
+				"IC": 19,
+				"ARD": "D8"
+			},
+			"TSO": {
+				"IC": 17,
+				"ARD": [
+					"D10",
+					"A0"
+				]
+			},
+			"TSI": {
+				"IC": 18,
+				"ARD": "D9"
+			}
+		},
+		"front": [
+			{
+				"name": "chip",
+				"pos": "2.3,3.5",
+				"vars": {
+					"W": 5,
+					"POS": 1
+				}
+			},
+			{
+				"type": "text",
+				"pos": "3.5,2.2",
+				"text": "${SYMBOL}",
+				"font_size": 1.2,
+				"fill": {
+					"color": "${SILK_COLOR}"
+				}
+			}
+		],
+		"back": [
+			{
+				"name": "osc",
+				"pos": "2.6,1.3"
+			}
+		]
+	}
+}

boards/_base/pcb/wr1.json

@@ -0,0 +1,82 @@
+{
+	"pcb": {
+		"templates": [
+			"tuya1",
+			"pcb-black",
+			"tuya-16x24",
+			"rf-type1"
+		],
+		"scale": 15,
+		"pinout_hidden": "I2S,TRIG,WAKE,CTS,RTS,SD",
+		"pinout": {
+			"1": {
+				"PWR": "VCC5"
+			},
+			"2": {
+				"IC": 32,
+				"ARD": "D0"
+			},
+			"3": {
+				"IC": 29,
+				"ARD": "D1"
+			},
+			"4": {
+				"PWR": 3.3
+			},
+			"5": {
+				"GND": null
+			},
+			"6": {
+				"IC": 13,
+				"ARD": "D2"
+			},
+			"7": {
+				"IC": 14,
+				"ARD": "D3"
+			},
+			"8": {
+				"IC": 1,
+				"ARD": "D4"
+			},
+			"9": {
+				"IC": 16,
+				"ARD": "D5"
+			},
+			"10": {
+				"IC": 28,
+				"ARD": "D6"
+			},
+			"11": {
+				"IC": 2,
+				"ARD": "D7"
+			},
+			"12": {
+				"IC": 30,
+				"ARD": [
+					"D8",
+					"A0"
+				]
+			},
+			"13": {
+				"IC": 31,
+				"ARD": "D9"
+			},
+			"14": {
+				"GND": null
+			},
+			"15": {
+				"GND": null
+			},
+			"16": {
+				"IC": 12
+			},
+			"17": {
+				"IC": 27,
+				"ARD": "A1"
+			},
+			"18": {
+				"GND": null
+			}
+		}
+	}
+}

boards/_base/pcb/wr1e.json

@@ -0,0 +1,82 @@
+{
+	"pcb": {
+		"templates": [
+			"tuya1",
+			"pcb-blue-light",
+			"tuya-16x24",
+			"rf-type1"
+		],
+		"scale": 15,
+		"pinout_hidden": "I2S,TRIG,WAKE,CTS,RTS,SD",
+		"pinout": {
+			"1": {
+				"PWR": "VCC5"
+			},
+			"2": {
+				"IC": 32,
+				"ARD": "D0"
+			},
+			"3": {
+				"IC": 29,
+				"ARD": "D1"
+			},
+			"4": {
+				"PWR": 3.3
+			},
+			"5": {
+				"GND": null
+			},
+			"6": {
+				"IC": 13,
+				"ARD": "D2"
+			},
+			"7": {
+				"IC": 14,
+				"ARD": "D3"
+			},
+			"8": {
+				"IC": 1,
+				"ARD": "D4"
+			},
+			"9": {
+				"IC": 17,
+				"ARD": "D5"
+			},
+			"10": {
+				"IC": 28,
+				"ARD": "D6"
+			},
+			"11": {
+				"IC": 2,
+				"ARD": "D7"
+			},
+			"12": {
+				"IC": 30,
+				"ARD": [
+					"D8",
+					"A0"
+				]
+			},
+			"13": {
+				"IC": 31,
+				"ARD": "D9"
+			},
+			"14": {
+				"GND": null
+			},
+			"15": {
+				"GND": null
+			},
+			"16": {
+				"IC": 12
+			},
+			"17": {
+				"IC": 27,
+				"ARD": "A1"
+			},
+			"18": {
+				"GND": null
+			}
+		}
+	}
+}

boards/_base/pcb/wr2-base.json

@@ -2,13 +2,8 @@
 	"pcb": {
 		"templates": [
 			"tuya2",
-			"rf-15mm-type1",
-			"tuya2-shield"
-		],
-		"vars": {
-			"MASK_PRESET": "mask_blue_light",
-			"TRACE_COLOR": "#58839B",
-			"SILK_COLOR": "white"
-		}
+			"pcb-blue-light",
+			"rf-type1"
+		]
 	}
 }

boards/_base/pcb/wr2l-base.json

@@ -2,14 +2,8 @@
 	"pcb": {
 		"templates": [
 			"tuya2l",
-			"rf-15mm-type1",
-			"tuya2l-shield"
-		],
-		"vars": {
-			"MASK_PRESET": "mask_blue_light",
-			"TRACE_COLOR": "#58839B",
-			"SILK_COLOR": "white",
-			"PINTYPE_HORZ": "pin_horz_2mm_cast_hole"
-		}
+			"pcb-blue-light",
+			"rf-type1"
+		]
 	}
 }

boards/_base/pcb/wr3-base.json

@@ -2,15 +2,8 @@
 	"pcb": {
 		"templates": [
 			"esp12s",
-			"esp12s-shield",
 			"tuya-16x24",
-			"rf-16mm-type1"
-		],
-		"vars": {
-			"MASK_PRESET": "mask_black",
-			"TRACE_COLOR": "#505050",
-			"SILK_COLOR": "white",
-			"PINTYPE_VERT": "pin_vert_2mm_cast_nohole"
-		}
+			"rf-type1"
+		]
 	}
 }

boards/_base/pcb/wr3.json

@@ -1,5 +1,8 @@
 {
 	"pcb": {
+		"templates": [
+			"pcb-black"
+		],
 		"pinout_hidden": "I2S,TRIG,WAKE,CTS,RTS,SD",
 		"pinout": {
 			"1": {

boards/_base/pcb/wr3e.json

@@ -1,10 +1,8 @@
 {
 	"pcb": {
-		"vars": {
-			"MASK_PRESET": "mask_blue_light",
-			"TRACE_COLOR": "#58839B",
-			"SILK_COLOR": "white"
-		},
+		"templates": [
+			"pcb-blue-light"
+		],
 		"pinout_hidden": "I2S,TRIG,WAKE,CTS,RTS,SD",
 		"pinout": {
 			"1": {

boards/_base/pcb/wr3l-base.json

@@ -2,15 +2,9 @@
 	"pcb": {
 		"templates": [
 			"esp12s",
-			"esp12e-shield",
+			"pcb-white",
 			"tuya-16x24",
-			"rf-16mm-type1"
-		],
-		"vars": {
-			"MASK_PRESET": "mask_white",
-			"TRACE_COLOR": "#E0E0E0",
-			"SILK_COLOR": "black",
-			"PINTYPE_VERT": "pin_vert_2mm_cast_hole"
-		}
+			"rf-type1"
+		]
 	}
 }

boards/_base/pcb/wr3n.json

@@ -1,5 +1,8 @@
 {
 	"pcb": {
+		"templates": [
+			"pcb-black"
+		],
 		"pinout_hidden": "I2S,TRIG,WAKE,CTS,RTS,SD,SPI",
 		"pinout": {
 			"1": {

boards/cb1s.json

@@ -0,0 +1,20 @@
+{
+	"_base": [
+		"beken-72xx",
+		"beken-7231n",
+		"beken-7231-tuya",
+		"ic/bk7231-qfn32",
+		"pcb/cb1s",
+		"pcb/cb1s-test"
+	],
+	"build": {
+		"mcu": "bk7231n",
+		"variant": "cb1s"
+	},
+	"name": "CB1S Wi-Fi Module",
+	"url": "https://developer.tuya.com/en/docs/iot/cb1s-module-datasheet?id=Kaij1abmwyjq2",
+	"vendor": "Tuya Inc.",
+	"pcb": {
+		"symbol": "CB1S"
+	}
+}

boards/cb2l.json

@@ -2,7 +2,7 @@
 	"_base": [
 		"beken-72xx",
 		"beken-7231n",
-		"beken-7231n-tuya",
+		"beken-7231-tuya",
 		"ic/bk7231-qfn32",
 		"pcb/cb2l",
 		"pcb/cb2l-test"

boards/cb2s.json

@@ -2,7 +2,7 @@
 	"_base": [
 		"beken-72xx",
 		"beken-7231n",
-		"beken-7231n-tuya",
+		"beken-7231-tuya",
 		"ic/bk7231-qfn32",
 		"pcb/cb2s",
 		"pcb/cb2s-test"

boards/cb3l.json

@@ -2,7 +2,7 @@
 	"_base": [
 		"beken-72xx",
 		"beken-7231n",
-		"beken-7231n-tuya",
+		"beken-7231-tuya",
 		"ic/bk7231-qfn32",
 		"pcb/cb3l"
 	],

boards/cb3s.json

@@ -2,7 +2,7 @@
 	"_base": [
 		"beken-72xx",
 		"beken-7231n",
-		"beken-7231n-tuya",
+		"beken-7231-tuya",
 		"ic/bk7231-qfn32",
 		"pcb/cb3s"
 	],

boards/cb3se.json

@@ -2,7 +2,7 @@
 	"_base": [
 		"beken-72xx",
 		"beken-7231n",
-		"beken-7231n-tuya",
+		"beken-7231-tuya",
 		"ic/bk7231-qfn32",
 		"pcb/cb3se"
 	],

boards/cblc5.json

@@ -0,0 +1,20 @@
+{
+	"_base": [
+		"beken-72xx",
+		"beken-7231n",
+		"beken-7231-tuya",
+		"ic/bk7231-qfn32",
+		"pcb/cblc5",
+		"pcb/cblc5-test"
+	],
+	"build": {
+		"mcu": "bk7231n",
+		"variant": "cblc5"
+	},
+	"name": "CBLC5 Wi-Fi Module",
+	"url": "https://developer.tuya.com/en/docs/iot/cblc5-module-datasheet?id=Ka07iqyusq1wm",
+	"vendor": "Tuya Inc.",
+	"pcb": {
+		"symbol": "CBLC5"
+	}
+}

boards/cbu.json

@@ -0,0 +1,23 @@
+{
+  "_base": [
+    "beken-72xx",
+    "beken-7231n",
+    "beken-7231-tuya",
+    "ic/bk7231-qfn32",
+    "pcb/cbu",
+    "pcb/cbu-test"
+  ],
+  "build": {
+    "mcu": "bk7231n",
+    "variant": "cbu"
+  },
+  "name": "CBU Wi-Fi Module",
+  "url": "https://developer.tuya.com/en/docs/iot/cbu-module-datasheet?id=Ka07pykl5dk4u",
+  "vendor": "Tuya Inc.",
+  "doc": {
+    "fccid": "2ANDL-CBU"
+  },
+  "pcb": {
+    "symbol": "CBU"
+  }
+}

boards/generic-bk7231n-qfn32-tuya.json

@@ -3,7 +3,7 @@
 		"generic",
 		"beken-72xx",
 		"beken-7231n",
-		"beken-7231n-tuya",
+		"beken-7231-tuya",
 		"ic/bk7231-qfn32"
 	],
 	"build": {

boards/generic-bk7231t-qfn32-tuya.json

@@ -2,8 +2,9 @@
 	"_base": [
 		"generic",
 		"beken-72xx",
-		"beken-7231u",
-		"beken-7231t-tuya",
+		"beken-7231",
+		"beken-7231t",
+		"beken-7231-tuya",
 		"ic/bk7231-qfn32"
 	],
 	"build": {

boards/lsc-lma35-t.json

@@ -1,8 +1,9 @@
 {
 	"_base": [
 		"beken-72xx",
-		"beken-7231u",
-		"beken-7231t-tuya",
+		"beken-7231",
+		"beken-7231t",
+		"beken-7231-tuya",
 		"ic/bk7231-qfn32",
 		"pcb/lsc-lma35"
 	],

boards/lsc-lma35.json

@@ -2,7 +2,7 @@
 	"_base": [
 		"beken-72xx",
 		"beken-7231n",
-		"beken-7231n-tuya",
+		"beken-7231-tuya",
 		"ic/bk7231-qfn32",
 		"pcb/lsc-lma35"
 	],
@@ -10,8 +10,8 @@
 		"mcu": "bk7231n",
 		"variant": "lsc-lma35"
 	},
-	"name": "LSC LMA35",
-	"symbol": "LSC LMA35",
+	"name": "LSC LMA35 BK7231N",
+	"symbol": "LSC LMA35 N",
 	"url": "https://www.action.com/de-at/p/lsc-smart-connect-outdoor-led-streifen/",
 	"vendor": "Unknown",
 	"pcb": {

boards/shapes/tuya2_pcb.json

@@ -0,0 +1,54 @@
+[
+	{
+		"type": "rect",
+		"pos": "0,0",
+		"size": "15,17.9",
+		"preset": "${MASK_PRESET}"
+	},
+	{
+		"comment": "Left cut stroke horizontal",
+		"type": "rect",
+		"pos": "0,14.35",
+		"size": "1.60,0.1",
+		"preset": "pcb_stroke"
+	},
+	{
+		"comment": "Left cut stroke vertical",
+		"type": "rect",
+		"pos": "1.60,14.35",
+		"size": "0.1,3.45",
+		"preset": "pcb_stroke"
+	},
+	{
+		"comment": "Left cut background",
+		"type": "rect",
+		"pos": "-0.1,14.45",
+		"size": "1.70,3.55",
+		"fill": {
+			"color": "white"
+		}
+	},
+	{
+		"comment": "Right cut stroke horizontal",
+		"type": "rect",
+		"pos": "13.3,14.35",
+		"size": "1.60,0.1",
+		"preset": "pcb_stroke"
+	},
+	{
+		"comment": "Right cut stroke vertical",
+		"type": "rect",
+		"pos": "13.3,14.35",
+		"size": "0.1,3.45",
+		"preset": "pcb_stroke"
+	},
+	{
+		"comment": "Right cut background",
+		"type": "rect",
+		"pos": "13.4,14.45",
+		"size": "1.70,3.55",
+		"fill": {
+			"color": "white"
+		}
+	}
+]

boards/shapes/tuyau_pcb.json

@@ -0,0 +1,54 @@
+[
+	{
+		"type": "rect",
+		"pos": "0,0",
+		"size": "15.8,20.3",
+		"preset": "${MASK_PRESET}"
+	},
+	{
+		"comment": "Left cut stroke horizontal",
+		"type": "rect",
+		"pos": "0,17.4",
+		"size": "1.50,0.1",
+		"preset": "pcb_stroke"
+	},
+	{
+		"comment": "Left cut stroke vertical",
+		"type": "rect",
+		"pos": "1.50,17.4",
+		"size": "0.1,2.8",
+		"preset": "pcb_stroke"
+	},
+	{
+		"comment": "Left cut background",
+		"type": "rect",
+		"pos": "-0.1,17.5",
+		"size": "1.60,2.85",
+		"fill": {
+			"color": "white"
+		}
+	},
+	{
+		"comment": "Right cut stroke horizontal",
+		"type": "rect",
+		"pos": "14.1,17.4",
+		"size": "1.60,0.1",
+		"preset": "pcb_stroke"
+	},
+	{
+		"comment": "Right cut stroke vertical",
+		"type": "rect",
+		"pos": "14.1,17.4",
+		"size": "0.1,2.8",
+		"preset": "pcb_stroke"
+	},
+	{
+		"comment": "Right cut background",
+		"type": "rect",
+		"pos": "14.2,17.5",
+		"size": "1.70,2.85",
+		"fill": {
+			"color": "white"
+		}
+	}
+]

boards/t102-v1.1.json

@@ -0,0 +1,21 @@
+{
+	"_base": [
+		"realtek-ambz",
+		"realtek-ambz-2mb-788k",
+		"ic/rtl8710bn",
+		"pcb/t102"
+	],
+	"build": {
+		"mcu": "rtl8710bn",
+		"variant": "t102-v1.1"
+	},
+	"name": "T102_V1.1",
+	"url": "https://docs.libretiny.eu/boards/t102-v1.1/",
+	"vendor": "Unknown",
+	"doc": {
+		"fccid": "2AU7O-T102V11"
+	},
+	"pcb": {
+		"symbol": "T102_V1.1"
+	}
+}

boards/t103-v1.0.json

@@ -0,0 +1,26 @@
+{
+	"_base": [
+		"realtek-ambz",
+		"realtek-ambz-2mb-788k",
+		"realtek-ambz-bx",
+		"ic/rtl8710bn",
+		"pcb/t103"
+	],
+	"build": {
+		"mcu": "rtl8710bx",
+		"variant": "t103-v1.0"
+	},
+	"name": "T103_V1.0",
+	"url": "https://docs.libretiny.eu/boards/t103-v1.0/",
+	"vendor": "Unknown",
+	"doc": {
+		"fccid": "2AU7O-T102V11",
+		"extra": [
+			"## Source",
+			"Pinout information sourced from [teardown post by @p.kaczmarek2 from Elektroda](https://www.elektroda.pl/rtvforum/topic3984148.html)."
+		]
+	},
+	"pcb": {
+		"symbol": "T103_V1.0"
+	}
+}

boards/templates/custom-20x24-22.json

@@ -0,0 +1,141 @@
+{
+	"name": "custom-20x24-22",
+	"title": "Custom 20x24mm form factor (22-pin)",
+	"width": 20,
+	"height": 24,
+	"vars": {
+		"PINTYPE_VERT": "pin_vert_cast_nohole",
+		"PINTYPE_HORZ": "pin_horz_cast_nohole",
+		"RASTER": 2,
+		"RF_W": 20,
+		"RF_H": 6.5
+	},
+	"front": [
+		{
+			"comment": "PCB soldermask",
+			"type": "rect",
+			"pos": "0,0",
+			"size": "20,24",
+			"preset": "${MASK_PRESET}"
+		},
+		{
+			"comment": "Pins (1-7)",
+			"id": "left",
+			"name": "r_pins_vert",
+			"repeat": 7,
+			"pos": "0,8.5",
+			"vars": {
+				"PINDIR": "left"
+			}
+		},
+		{
+			"comment": "Pins (8-15)",
+			"id": "right",
+			"name": "r_pins_vert",
+			"repeat": 7,
+			"pos": "20,8.5",
+			"vars": {
+				"PINDIR": "right"
+			}
+		},
+		{
+			"comment": "Pins (16-22)",
+			"name": "r_pins_horz",
+			"repeat": 8,
+			"pos": "3,24",
+			"vars": {
+				"PINDIR": "down"
+			}
+		},
+		{
+			"comment": "Pin labels (16-22)",
+			"id": "down",
+			"name": "r_labels_horz",
+			"repeat": 8,
+			"pos": "3,24",
+			"vars": {
+				"PINDIR": "down"
+			}
+		},
+		{
+			"comment": "Metal shielding",
+			"type": "rect",
+			"pos": "1.2,6.95",
+			"size": "17.6,15.8",
+			"preset": "shield"
+		}
+	],
+	"back": [
+		{
+			"comment": "PCB soldermask",
+			"type": "rect",
+			"pos": "0,0",
+			"size": "20,24",
+			"preset": "${MASK_PRESET}"
+		},
+		{
+			"comment": "Pins (8-15)",
+			"id": "right",
+			"name": "r_pins_vert",
+			"repeat": 7,
+			"pos": "0,8.5",
+			"vars": {
+				"PINDIR": "left"
+			}
+		},
+		{
+			"comment": "Pins (1-7)",
+			"id": "left",
+			"name": "r_pins_vert",
+			"repeat": 7,
+			"pos": "20,8.5",
+			"vars": {
+				"PINDIR": "right"
+			}
+		},
+		{
+			"comment": "Pins (16-22)",
+			"name": "r_pins_horz",
+			"repeat": 8,
+			"pos": "3,24",
+			"vars": {
+				"PINDIR": "down"
+			}
+		},
+		{
+			"comment": "Pin labels (16-22)",
+			"id": "down",
+			"name": "r_labels_horz",
+			"repeat": 8,
+			"pos": "3,24",
+			"vars": {
+				"PINDIR": "down"
+			}
+		}
+	],
+	"pads": {
+		"1": "custom-20x24-22.front.left.pin1",
+		"2": "custom-20x24-22.front.left.pin2",
+		"3": "custom-20x24-22.front.left.pin3",
+		"4": "custom-20x24-22.front.left.pin4",
+		"5": "custom-20x24-22.front.left.pin5",
+		"6": "custom-20x24-22.front.left.pin6",
+		"7": "custom-20x24-22.front.left.pin7",
+		"8": "custom-20x24-22.front.right.pin7",
+		"9": "custom-20x24-22.front.right.pin6",
+		"10": "custom-20x24-22.front.right.pin5",
+		"11": "custom-20x24-22.front.right.pin4",
+		"12": "custom-20x24-22.front.right.pin3",
+		"13": "custom-20x24-22.front.right.pin2",
+		"14": "custom-20x24-22.front.right.pin1",
+		"15": "custom-20x24-22.front.down.label1.anchor",
+		"16": "custom-20x24-22.front.down.label2.anchor",
+		"17": "custom-20x24-22.front.down.label3.anchor",
+		"18": "custom-20x24-22.front.down.label4.anchor",
+		"19": "custom-20x24-22.front.down.label5.anchor",
+		"20": "custom-20x24-22.front.down.label6.anchor",
+		"21": "custom-20x24-22.front.down.label7.anchor",
+		"22": "custom-20x24-22.front.down.label8.anchor"
+	},
+	"test_pads": {}
+}

boards/templates/tuya-16x24.json

@@ -0,0 +1,27 @@
+{
+	"name": "tuya-16x24",
+	"title": "Tuya boards; 16x24mm; 16 or 22 pin",
+	"width": 16,
+	"height": 24,
+	"front": [
+		{
+			"comment": "Line below model name",
+			"type": "rect",
+			"pos": "0.5,6.2",
+			"size": "15,0.15",
+			"fill": {
+				"color": "${SILK_COLOR}"
+			}
+		},
+		{
+			"comment": "Board model name",
+			"type": "text",
+			"pos": "7.0,5.5",
+			"text": "${SYMBOL}",
+			"font_size": 1.0,
+			"fill": {
+				"color": "${SILK_COLOR}"
+			}
+		}
+	]
+}

boards/templates/tuya1.json

@@ -0,0 +1,99 @@
+{
+	"name": "tuya1",
+	"title": "Tuya boards; 1 series",
+	"width": 18,
+	"height": 23.5,
+	"vars": {
+		"PINTYPE_VERT": "pin_vert_cast_nohole",
+		"PINTYPE_HORZ": "pin_horz_cast_nohole",
+		"RASTER": 1.5,
+		"RF_W": 18,
+		"RF_H": 6.1
+	},
+	"front": [
+		{
+			"comment": "PCB soldermask",
+			"type": "rect",
+			"pos": "0,0",
+			"size": "18,23.5",
+			"preset": "${MASK_PRESET}"
+		},
+		{
+			"comment": "Metal shielding",
+			"type": "rect",
+			"pos": "1.3,7.3",
+			"size": "15.4,15.4",
+			"preset": "shield"
+		},
+		{
+			"comment": "Pins (1-9)",
+			"id": "left",
+			"name": "r_pins_vert",
+			"repeat": 9,
+			"pos": "0,10.6",
+			"vars": {
+				"PINDIR": "left"
+			}
+		},
+		{
+			"comment": "Pins (10-18)",
+			"id": "right",
+			"name": "r_pins_vert",
+			"repeat": 9,
+			"pos": "18,10.6",
+			"vars": {
+				"PINDIR": "right"
+			}
+		}
+	],
+	"back": [
+		{
+			"comment": "PCB soldermask",
+			"type": "rect",
+			"pos": "0,0",
+			"size": "18,23.5",
+			"preset": "${MASK_PRESET}"
+		},
+		{
+			"comment": "Pins (1-9)",
+			"id": "left",
+			"name": "r_pins_vert",
+			"repeat": 9,
+			"pos": "0,10.6",
+			"vars": {
+				"PINDIR": "left"
+			}
+		},
+		{
+			"comment": "Pins (10-18)",
+			"id": "right",
+			"name": "r_pins_vert",
+			"repeat": 9,
+			"pos": "18,10.6",
+			"vars": {
+				"PINDIR": "right"
+			}
+		}
+	],
+	"pads": {
+		"1": "tuya1.front.left.pin1",
+		"2": "tuya1.front.left.pin2",
+		"3": "tuya1.front.left.pin3",
+		"4": "tuya1.front.left.pin4",
+		"5": "tuya1.front.left.pin5",
+		"6": "tuya1.front.left.pin6",
+		"7": "tuya1.front.left.pin7",
+		"8": "tuya1.front.left.pin8",
+		"9": "tuya1.front.left.pin9",
+		"10": "tuya1.front.right.pin9",
+		"11": "tuya1.front.right.pin8",
+		"12": "tuya1.front.right.pin7",
+		"13": "tuya1.front.right.pin6",
+		"14": "tuya1.front.right.pin5",
+		"15": "tuya1.front.right.pin4",
+		"16": "tuya1.front.right.pin3",
+		"17": "tuya1.front.right.pin2",
+		"18": "tuya1.front.right.pin1"
+	},
+	"test_pads": {}
+}

boards/templates/tuya1s.json

@@ -0,0 +1,64 @@
+{
+	"name": "tuya1s",
+	"title": "Tuya boards; 1S series",
+	"width": 18,
+	"height": 23.5,
+	"vars": {
+		"PINTYPE_VERT": "pin_vert_cast_nohole",
+		"PINTYPE_HORZ": "pin_horz_cast_nohole",
+		"RASTER": 1.5,
+		"RF_W": 18,
+		"RF_H": 6.1
+	},
+	"front": [
+		{
+			"comment": "Pins (19-24)",
+			"name": "r_pins_horz",
+			"repeat": 6,
+			"pos": "5.25,23.5",
+			"vars": {
+				"PINDIR": "down"
+			}
+		},
+		{
+			"comment": "Pin labels (19-24)",
+			"id": "down",
+			"name": "r_labels_horz",
+			"repeat": 6,
+			"pos": "5.25,23.5",
+			"vars": {
+				"PINDIR": "down"
+			}
+		}
+	],
+	"back": [
+		{
+			"comment": "Pins (10-18)",
+			"name": "r_pins_vert",
+			"repeat": 9,
+			"pos": "18,10.6",
+			"vars": {
+				"PINDIR": "right"
+			}
+		},
+		{
+			"comment": "Pins (19-24)",
+			"id": "down",
+			"name": "r_pins_horz",
+			"repeat": 6,
+			"pos": "5.25,23.5",
+			"vars": {
+				"PINDIR": "down"
+			}
+		}
+	],
+	"pads": {
+		"19": "tuya1s.front.down.label1.anchor",
+		"20": "tuya1s.front.down.label2.anchor",
+		"21": "tuya1s.front.down.label3.anchor",
+		"22": "tuya1s.front.down.label4.anchor",
+		"23": "tuya1s.front.down.label5.anchor",
+		"24": "tuya1s.front.down.label6.anchor"
+	},
+	"test_pads": {}
+}

boards/templates/tuya2.json

@@ -0,0 +1,80 @@
+{
+	"name": "tuya2",
+	"title": "Tuya boards; 2 series",
+	"width": 15,
+	"height": 17.9,
+	"vars": {
+		"PINTYPE_HORZ": "pad_10x25",
+		"PINDIR": "down",
+		"RASTER": 2,
+		"RF_W": 15,
+		"RF_H": 5.5
+	},
+	"front": [
+		{
+			"name": "tuya2_pcb",
+			"pos": "0,0"
+		},
+		{
+			"comment": "Metal shielding",
+			"type": "rect",
+			"pos": "0.3,6",
+			"size": "14.4,8",
+			"preset": "shield"
+		},
+		{
+			"comment": "Pins (10,8,6,4,2)",
+			"name": "r_pins_horz",
+			"repeat": 5,
+			"pos": "3.5,16.3"
+		},
+		{
+			"comment": "Pin labels (10,8,6,4,2)",
+			"id": "pins",
+			"name": "r_labels_horz",
+			"repeat": 5,
+			"pos": "3.5,17.9"
+		},
+		{
+			"type": "text",
+			"pos": "7.0,5.0",
+			"text": "${SYMBOL}",
+			"font_size": 1.0,
+			"fill": {
+				"color": "${SILK_COLOR}"
+			}
+		}
+	],
+	"back": [
+		{
+			"name": "tuya2_pcb",
+			"pos": "0,0"
+		},
+		{
+			"comment": "Pins (1,3,5,7,9,11)",
+			"name": "r_pins_horz",
+			"repeat": 6,
+			"pos": "2.5,16.3"
+		},
+		{
+			"comment": "Pin labels (1,3,5,7,9,11)",
+			"id": "pins",
+			"name": "r_labels_horz",
+			"repeat": 6,
+			"pos": "2.5,17.9"
+		}
+	],
+	"pads": {
+		"1": "tuya2.back.pins.label1.anchor",
+		"2": "tuya2.front.pins.label5.anchor",
+		"3": "tuya2.back.pins.label2.anchor",
+		"4": "tuya2.front.pins.label4.anchor",
+		"5": "tuya2.back.pins.label3.anchor",
+		"6": "tuya2.front.pins.label3.anchor",
+		"7": "tuya2.back.pins.label4.anchor",
+		"8": "tuya2.front.pins.label2.anchor",
+		"9": "tuya2.back.pins.label5.anchor",
+		"10": "tuya2.front.pins.label1.anchor",
+		"11": "tuya2.back.pins.label6.anchor"
+	}
+}

boards/templates/tuya2l.json

@@ -0,0 +1,73 @@
+{
+	"name": "tuya2l",
+	"title": "Tuya boards; 2L series",
+	"width": 15,
+	"height": 17.3,
+	"vars": {
+		"PINTYPE_HORZ": "pin_horz_cast_hole",
+		"PINDIR": "down",
+		"RASTER": 2,
+		"RF_W": 15,
+		"RF_H": 5.5
+	},
+	"front": [
+		{
+			"type": "rect",
+			"pos": "0,0",
+			"size": "15,17.3",
+			"preset": "${MASK_PRESET}"
+		},
+		{
+			"comment": "Metal shielding",
+			"type": "rect",
+			"pos": "0.7,6",
+			"size": "13.6,9",
+			"preset": "shield"
+		},
+		{
+			"comment": "Pins (1-7)",
+			"name": "r_pins_horz",
+			"repeat": 7,
+			"pos": "1.5,17.3"
+		},
+		{
+			"comment": "Pin labels (1-7)",
+			"id": "pins",
+			"name": "r_labels_horz",
+			"repeat": 7,
+			"pos": "1.5,17.3"
+		},
+		{
+			"type": "text",
+			"pos": "4.0,5.5",
+			"text": "${SYMBOL}",
+			"font_size": 1.0,
+			"fill": {
+				"color": "${SILK_COLOR}"
+			}
+		}
+	],
+	"back": [
+		{
+			"type": "rect",
+			"pos": "0,0",
+			"size": "15,17.3",
+			"preset": "${MASK_PRESET}"
+		},
+		{
+			"comment": "Pins (1-7)",
+			"name": "r_pins_horz",
+			"repeat": 7,
+			"pos": "1.5,17.3"
+		}
+	],
+	"pads": {
+		"1": "tuya2l.front.pins.label1.anchor",
+		"2": "tuya2l.front.pins.label2.anchor",
+		"3": "tuya2l.front.pins.label3.anchor",
+		"4": "tuya2l.front.pins.label4.anchor",
+		"5": "tuya2l.front.pins.label5.anchor",
+		"6": "tuya2l.front.pins.label6.anchor",
+		"7": "tuya2l.front.pins.label7.anchor"
+	}
+}

boards/templates/tuyalc5.json

@@ -0,0 +1,255 @@
+{
+	"name": "tuyalc5",
+	"title": "Tuya boards; LC5 series",
+	"width": 15.8,
+	"height": 20.3,
+	"vars": {
+		"RASTER": 2
+	},
+	"front": [
+		{
+			"type": "rect",
+			"pos": "0,0",
+			"size": "8.5,12.7",
+			"preset": "${MASK_PRESET}"
+		},
+		{
+			"comment": "Middle cut background",
+			"type": "rect",
+			"pos": "4,10.3",
+			"size": "2.5,2.4",
+			"fill": {
+				"color": "white"
+			}
+		},
+		{
+			"comment": "Middle cut stroke top",
+			"type": "rect",
+			"pos": "3.9,10.2",
+			"size": "2.7,0.1",
+			"preset": "pcb_stroke"
+		},
+		{
+			"comment": "Middle cut stroke left",
+			"type": "rect",
+			"pos": "3.9,10.3",
+			"size": "0.1,2.4",
+			"preset": "pcb_stroke"
+		},
+		{
+			"comment": "Middle cut stroke right",
+			"type": "rect",
+			"pos": "6.5,10.3",
+			"size": "0.1,2.4",
+			"preset": "pcb_stroke"
+		},
+		{
+			"comment": "Right cut background",
+			"type": "rect",
+			"pos": "7.7,10.3",
+			"size": "0.8,2.4",
+			"fill": {
+				"color": "white"
+			}
+		},
+		{
+			"comment": "Right cut stroke top",
+			"type": "rect",
+			"pos": "7.6,10.2",
+			"size": "0.9,0.1",
+			"preset": "pcb_stroke"
+		},
+		{
+			"comment": "Right cut stroke left",
+			"type": "rect",
+			"pos": "7.6,10.3",
+			"size": "0.1,2.4",
+			"preset": "pcb_stroke"
+		},
+		{
+			"comment": "Pins (1-2)",
+			"id": "left",
+			"name": "r_pins_horz",
+			"repeat": 2,
+			"pos": "1.26,11.58",
+			"vars": {
+				"PINTYPE_HORZ": "pad",
+				"PINDIR": "down",
+				"RASTER": 2,
+				"W": 1,
+				"H": 2,
+				"R": 0.3
+			}
+		},
+		{
+			"comment": "Pins (3)",
+			"name": "pad",
+			"pos": "7.13,11.58",
+			"vars": {
+				"W": 1,
+				"H": 2,
+				"R": 0.3
+			}
+		},
+		{
+			"comment": "Pin label (1)",
+			"id": "pin1",
+			"name": "label_line_down",
+			"pos": "1.26,12.7",
+			"vars": {
+				"DIR": "left",
+				"W": 0,
+				"H": 2
+			}
+		},
+		{
+			"comment": "Pin label (2)",
+			"id": "pin2",
+			"name": "label_line_down",
+			"pos": "3.26,12.7",
+			"vars": {
+				"DIR": "left",
+				"W": 2,
+				"H": 4
+			}
+		},
+		{
+			"comment": "Pin label (3)",
+			"id": "pin3",
+			"name": "label_line_down",
+			"pos": "7.13,12.7",
+			"vars": {
+				"DIR": "left",
+				"W": 5.87,
+				"H": 6
+			}
+		}
+	],
+	"back": [
+		{
+			"type": "rect",
+			"pos": "0,0",
+			"size": "8.5,12.7",
+			"preset": "${MASK_PRESET}"
+		},
+		{
+			"comment": "Middle cut background",
+			"type": "rect",
+			"pos": "8.5-4-2.5,10.3",
+			"size": "2.5,2.4",
+			"fill": {
+				"color": "white"
+			}
+		},
+		{
+			"comment": "Middle cut stroke top",
+			"type": "rect",
+			"pos": "8.5-3.9-2.7,10.2",
+			"size": "2.7,0.1",
+			"preset": "pcb_stroke"
+		},
+		{
+			"comment": "Middle cut stroke left",
+			"type": "rect",
+			"pos": "8.5-3.9-0.1,10.3",
+			"size": "0.1,2.4",
+			"preset": "pcb_stroke"
+		},
+		{
+			"comment": "Middle cut stroke right",
+			"type": "rect",
+			"pos": "8.5-6.5-0.1,10.3",
+			"size": "0.1,2.4",
+			"preset": "pcb_stroke"
+		},
+		{
+			"comment": "Right cut background",
+			"type": "rect",
+			"pos": "8.5-7.7-0.8,10.3",
+			"size": "0.8,2.4",
+			"fill": {
+				"color": "white"
+			}
+		},
+		{
+			"comment": "Right cut stroke top",
+			"type": "rect",
+			"pos": "8.5-7.6-0.9,10.2",
+			"size": "0.9,0.1",
+			"preset": "pcb_stroke"
+		},
+		{
+			"comment": "Right cut stroke left",
+			"type": "rect",
+			"pos": "8.5-7.6-0.1,10.3",
+			"size": "0.1,2.4",
+			"preset": "pcb_stroke"
+		},
+		{
+			"comment": "Pins (1-2)",
+			"id": "left",
+			"name": "r_pins_horz",
+			"repeat": 2,
+			"pos": "8.5-1.26-2,11.58",
+			"vars": {
+				"PINTYPE_HORZ": "pad",
+				"PINDIR": "down",
+				"RASTER": 2,
+				"W": 1,
+				"H": 2,
+				"R": 0.3
+			}
+		},
+		{
+			"comment": "Pins (3)",
+			"name": "pad",
+			"pos": "8.5-7.13,11.58",
+			"vars": {
+				"W": 1,
+				"H": 2,
+				"R": 0.3
+			}
+		},
+		{
+			"comment": "Pin label (1)",
+			"id": "pin1",
+			"name": "label_line_down",
+			"pos": "8.5-1.26,12.7",
+			"vars": {
+				"DIR": "right",
+				"W": 0,
+				"H": 2
+			}
+		},
+		{
+			"comment": "Pin label (2)",
+			"id": "pin2",
+			"name": "label_line_down",
+			"pos": "8.5-3.26,12.7",
+			"vars": {
+				"DIR": "right",
+				"W": 2,
+				"H": 4
+			}
+		},
+		{
+			"comment": "Pin label (3)",
+			"id": "pin3",
+			"name": "label_line_down",
+			"pos": "8.5-7.13,12.7",
+			"vars": {
+				"DIR": "right",
+				"W": 5.87,
+				"H": 6
+			}
+		}
+	],
+	"pads": {
+		"1": "tuyalc5.front.pin1.anchor",
+		"2": "tuyalc5.back.pin1.anchor",
+		"3": "tuyalc5.front.pin2.anchor",
+		"4": "tuyalc5.back.pin2.anchor",
+		"5": "tuyalc5.front.pin3.anchor",
+		"6": "tuyalc5.back.pin3.anchor"
+	}
+}

boards/templates/tuyau.json

@@ -0,0 +1,162 @@
+{
+	"name": "tuyau",
+	"title": "Tuya boards; U series",
+	"width": 15.8,
+	"height": 20.3,
+	"vars": {
+		"PINTYPE_VERT": "pin_vert_cast_nohole",
+		"PINTYPE_HORZ": "pin_horz_cast_nohole",
+		"RF_W": 15.8,
+		"RF_H": 5.2
+	},
+	"front": [
+		{
+			"name": "tuyau_pcb",
+			"pos": "0,0"
+		},
+		{
+			"comment": "Metal shielding",
+			"type": "rect",
+			"pos": "1.1,5.6",
+			"size": "13.6,11.5",
+			"preset": "shield"
+		},
+		{
+			"comment": "Pins (1-7)",
+			"id": "left",
+			"name": "r_pins_vert",
+			"repeat": 7,
+			"pos": "0,6.1",
+			"vars": {
+				"PINDIR": "left",
+				"RASTER": 1.4
+			}
+		},
+		{
+			"comment": "Pins (8-14)",
+			"name": "r_pins_horz",
+			"repeat": 7,
+			"pos": "2.5,20.3",
+			"vars": {
+				"PINDIR": "down",
+				"RASTER": 1.8
+			}
+		},
+		{
+			"comment": "Long pads (8-14)",
+			"name": "r_pins_horz",
+			"repeat": 7,
+			"pos": "2.5,17.5 + 1.2",
+			"vars": {
+				"PINTYPE_HORZ": "pad",
+				"W": "0.6 * 1.8",
+				"H": 2.4,
+				"R": 0,
+				"RASTER": 1.8
+			}
+		},
+		{
+			"comment": "Pin labels (8-14)",
+			"id": "down",
+			"name": "r_labels_horz",
+			"repeat": 7,
+			"pos": "2.5,20.3",
+			"vars": {
+				"PINDIR": "down",
+				"RASTER": 1.8
+			}
+		},
+		{
+			"comment": "Pins (15-21)",
+			"id": "right",
+			"name": "r_pins_vert",
+			"repeat": 7,
+			"pos": "15.8,6.1",
+			"vars": {
+				"PINDIR": "right",
+				"RASTER": 1.4
+			}
+		},
+		{
+			"type": "text",
+			"pos": "4.0,5.5",
+			"text": "${SYMBOL}",
+			"font_size": 1.0,
+			"fill": {
+				"color": "${SILK_COLOR}"
+			}
+		}
+	],
+	"back": [
+		{
+			"name": "tuyau_pcb",
+			"pos": "0,0"
+		},
+		{
+			"comment": "Pins (1-7)",
+			"name": "r_pins_vert",
+			"repeat": 7,
+			"pos": "0,6.1",
+			"vars": {
+				"PINDIR": "left",
+				"RASTER": 1.4
+			}
+		},
+		{
+			"comment": "Pins (8-14)",
+			"name": "r_pins_horz",
+			"repeat": 7,
+			"pos": "2.5,20.3",
+			"vars": {
+				"PINDIR": "down",
+				"RASTER": 1.8
+			}
+		},
+		{
+			"comment": "Long pads (8-14)",
+			"name": "r_pins_horz",
+			"repeat": 7,
+			"pos": "2.5,17.5 + 1.2",
+			"vars": {
+				"PINTYPE_HORZ": "pad",
+				"W": "0.6 * 1.8",
+				"H": 2.4,
+				"R": 0,
+				"RASTER": 1.8
+			}
+		},
+		{
+			"comment": "Pins (15-21)",
+			"name": "r_pins_vert",
+			"repeat": 7,
+			"pos": "15.8,6.1",
+			"vars": {
+				"PINDIR": "right",
+				"RASTER": 1.4
+			}
+		}
+	],
+	"pads": {
+		"1": "tuyau.front.left.pin1",
+		"2": "tuyau.front.left.pin2",
+		"3": "tuyau.front.left.pin3",
+		"4": "tuyau.front.left.pin4",
+		"5": "tuyau.front.left.pin5",
+		"6": "tuyau.front.left.pin6",
+		"7": "tuyau.front.left.pin7",
+		"8": "tuyau.front.down.label1.anchor",
+		"9": "tuyau.front.down.label2.anchor",
+		"10": "tuyau.front.down.label3.anchor",
+		"11": "tuyau.front.down.label4.anchor",
+		"12": "tuyau.front.down.label5.anchor",
+		"13": "tuyau.front.down.label6.anchor",
+		"14": "tuyau.front.down.label7.anchor",
+		"15": "tuyau.front.right.pin7",
+		"16": "tuyau.front.right.pin6",
+		"17": "tuyau.front.right.pin5",
+		"18": "tuyau.front.right.pin4",
+		"19": "tuyau.front.right.pin3",
+		"20": "tuyau.front.right.pin2",
+		"21": "tuyau.front.right.pin1"
+	}
+}

boards/variants/cb1s.c

@@ -0,0 +1,57 @@
+/* This file was auto-generated from cb1s.json using boardgen */
+
+#include <Arduino.h>
+
+#ifdef LT_VARIANT_INCLUDE
+#include LT_VARIANT_INCLUDE
+#endif
+
+// clang-format off
+PinInfo lt_arduino_pin_info_list[PINS_COUNT] = {
+	// D0: P11, UART1_TX
+	{GPIO11, PIN_GPIO | PIN_IRQ | PIN_UART,                     PIN_NONE, 0},
+	// D1: P10, UART1_RX
+	{GPIO10, PIN_GPIO | PIN_IRQ | PIN_UART,                     PIN_NONE, 0},
+	// D2: P6, PWM0
+	{GPIO6,  PIN_GPIO | PIN_IRQ | PIN_PWM,                      PIN_NONE, 0},
+	// D3: P7, PWM1
+	{GPIO7,  PIN_GPIO | PIN_IRQ | PIN_PWM,                      PIN_NONE, 0},
+	// D4: P0, UART2_TX, I2C2_SCL
+	{GPIO0,  PIN_GPIO | PIN_IRQ | PIN_I2C | PIN_UART,           PIN_NONE, 0},
+	// D5: P9, PWM3
+	{GPIO9,  PIN_GPIO | PIN_IRQ | PIN_PWM,                      PIN_NONE, 0},
+	// D6: P8, PWM2
+	{GPIO8,  PIN_GPIO | PIN_IRQ | PIN_PWM,                      PIN_NONE, 0},
+	// D7: P1, UART2_RX, I2C2_SDA
+	{GPIO1,  PIN_GPIO | PIN_IRQ | PIN_I2C | PIN_UART,           PIN_NONE, 0},
+	// D8: P24, PWM4
+	{GPIO24, PIN_GPIO | PIN_IRQ | PIN_PWM,                      PIN_NONE, 0},
+	// D9: P26, PWM5, IRDA
+	{GPIO26, PIN_GPIO | PIN_IRQ | PIN_PWM,                      PIN_NONE, 0},
+	// D10: P23, ADC3, TDO, FSO
+	{GPIO23, PIN_GPIO | PIN_IRQ | PIN_ADC | PIN_JTAG,           PIN_NONE, 0},
+	// D11: P20, I2C1_SCL, TCK, FSCK
+	{GPIO20, PIN_GPIO | PIN_IRQ | PIN_I2C | PIN_JTAG,           PIN_NONE, 0},
+	// D12: P21, I2C1_SDA, TMS, MCLK, ^FCS
+	{GPIO21, PIN_GPIO | PIN_IRQ | PIN_I2C | PIN_I2S | PIN_JTAG, PIN_NONE, 0},
+	// D13: P22, TDI, FSI
+	{GPIO22, PIN_GPIO | PIN_IRQ | PIN_JTAG,                     PIN_NONE, 0},
+};
+
+PinInfo *lt_arduino_pin_gpio_map[] = {
+	[0]  = &(lt_arduino_pin_info_list[4]),  // GPIO0 (D4)
+	[1]  = &(lt_arduino_pin_info_list[7]),  // GPIO1 (D7)
+	[6]  = &(lt_arduino_pin_info_list[2]),  // GPIO6 (D2)
+	[7]  = &(lt_arduino_pin_info_list[3]),  // GPIO7 (D3)
+	[8]  = &(lt_arduino_pin_info_list[6]),  // GPIO8 (D6)
+	[9]  = &(lt_arduino_pin_info_list[5]),  // GPIO9 (D5)
+	[10] = &(lt_arduino_pin_info_list[1]),  // GPIO10 (D1)
+	[11] = &(lt_arduino_pin_info_list[0]),  // GPIO11 (D0)
+	[20] = &(lt_arduino_pin_info_list[11]), // GPIO20 (D11)
+	[21] = &(lt_arduino_pin_info_list[12]), // GPIO21 (D12)
+	[22] = &(lt_arduino_pin_info_list[13]), // GPIO22 (D13)
+	[23] = &(lt_arduino_pin_info_list[10]), // GPIO23 (D10)
+	[24] = &(lt_arduino_pin_info_list[8]),  // GPIO24 (D8)
+	[26] = &(lt_arduino_pin_info_list[9]),  // GPIO26 (D9)
+};
+// clang-format on

boards/variants/cb1s.h

@@ -0,0 +1,104 @@
+/* This file was auto-generated from cb1s.json using boardgen */
+
+#pragma once
+
+// clang-format off
+
+// Pins
+// ----
+#define PINS_COUNT         14 // Total GPIO count
+#define NUM_DIGITAL_PINS   14 // Digital inputs/outputs
+#define NUM_ANALOG_INPUTS  1  // ADC inputs
+#define NUM_ANALOG_OUTPUTS 6  // PWM & DAC outputs
+#define PINS_GPIO_MAX      26 // Last usable GPIO number
+
+// Wire Interfaces
+// ---------------
+#define PIN_WIRE1_SCL 20u // GPIO20
+#define PIN_WIRE1_SDA 21u // GPIO21
+#define PIN_WIRE2_SCL 0u  // GPIO0
+#define PIN_WIRE2_SDA 1u  // GPIO1
+
+// Serial ports
+// ------------
+#define PIN_SERIAL1_RX 10u // GPIO10
+#define PIN_SERIAL1_TX 11u // GPIO11
+#define PIN_SERIAL2_RX 1u  // GPIO1
+#define PIN_SERIAL2_TX 0u  // GPIO0
+
+// Pin function macros
+// -------------------
+#define PIN_ADC3 23u // GPIO23
+#define PIN_P0   0u  // GPIO0
+#define PIN_P1   1u  // GPIO1
+#define PIN_P6   6u  // GPIO6
+#define PIN_P7   7u  // GPIO7
+#define PIN_P8   8u  // GPIO8
+#define PIN_P9   9u  // GPIO9
+#define PIN_P10  10u // GPIO10
+#define PIN_P11  11u // GPIO11
+#define PIN_P20  20u // GPIO20
+#define PIN_P21  21u // GPIO21
+#define PIN_P22  22u // GPIO22
+#define PIN_P23  23u // GPIO23
+#define PIN_P24  24u // GPIO24
+#define PIN_P26  26u // GPIO26
+#define PIN_PWM0 6u  // GPIO6
+#define PIN_PWM1 7u  // GPIO7
+#define PIN_PWM2 8u  // GPIO8
+#define PIN_PWM3 9u  // GPIO9
+#define PIN_PWM4 24u // GPIO24
+#define PIN_PWM5 26u // GPIO26
+#define PIN_RX1  10u // GPIO10
+#define PIN_RX2  1u  // GPIO1
+#define PIN_SCL1 20u // GPIO20
+#define PIN_SCL2 0u  // GPIO0
+#define PIN_SDA1 21u // GPIO21
+#define PIN_SDA2 1u  // GPIO1
+#define PIN_TX1  11u // GPIO11
+#define PIN_TX2  0u  // GPIO0
+
+// Port availability
+// -----------------
+#define HAS_SERIAL1             1
+#define HAS_SERIAL2             1
+#define HAS_WIRE1               1
+#define HAS_WIRE2               1
+#define SERIAL_INTERFACES_COUNT 2
+#define WIRE_INTERFACES_COUNT   2
+
+// Arduino pin names
+// -----------------
+#define PIN_D0  11u // GPIO11
+#define PIN_D1  10u // GPIO10
+#define PIN_D2  6u  // GPIO6
+#define PIN_D3  7u  // GPIO7
+#define PIN_D4  0u  // GPIO0
+#define PIN_D5  9u  // GPIO9
+#define PIN_D6  8u  // GPIO8
+#define PIN_D7  1u  // GPIO1
+#define PIN_D8  24u // GPIO24
+#define PIN_D9  26u // GPIO26
+#define PIN_D10 23u // GPIO23
+#define PIN_D11 20u // GPIO20
+#define PIN_D12 21u // GPIO21
+#define PIN_D13 22u // GPIO22
+#define PIN_A0  23u // GPIO23
+
+// Static pin names
+// ----------------
+static const unsigned char A0 = PIN_A0;
+static const unsigned char D0 = PIN_D0;
+static const unsigned char D1 = PIN_D1;
+static const unsigned char D2 = PIN_D2;
+static const unsigned char D3 = PIN_D3;
+static const unsigned char D4 = PIN_D4;
+static const unsigned char D5 = PIN_D5;
+static const unsigned char D6 = PIN_D6;
+static const unsigned char D7 = PIN_D7;
+static const unsigned char D8 = PIN_D8;
+static const unsigned char D9 = PIN_D9;
+static const unsigned char D10 = PIN_D10;
+static const unsigned char D11 = PIN_D11;
+static const unsigned char D12 = PIN_D12;
+static const unsigned char D13 = PIN_D13;

boards/variants/cblc5.c

@@ -0,0 +1,39 @@
+/* This file was auto-generated from cblc5.json using boardgen */
+
+#include <Arduino.h>
+
+#ifdef LT_VARIANT_INCLUDE
+#include LT_VARIANT_INCLUDE
+#endif
+
+// clang-format off
+PinInfo lt_arduino_pin_info_list[PINS_COUNT] = {
+	// D0: P24, PWM4
+	{GPIO24, PIN_GPIO | PIN_IRQ | PIN_PWM,                      PIN_NONE, 0},
+	// D1: P6, PWM0
+	{GPIO6,  PIN_GPIO | PIN_IRQ | PIN_PWM,                      PIN_NONE, 0},
+	// D2: P26, PWM5, IRDA
+	{GPIO26, PIN_GPIO | PIN_IRQ | PIN_PWM,                      PIN_NONE, 0},
+	// D3: P11, UART1_TX
+	{GPIO11, PIN_GPIO | PIN_IRQ | PIN_UART,                     PIN_NONE, 0},
+	// D4: P10, UART1_RX
+	{GPIO10, PIN_GPIO | PIN_IRQ | PIN_UART,                     PIN_NONE, 0},
+	// D5: P1, UART2_RX, I2C2_SDA
+	{GPIO1,  PIN_GPIO | PIN_IRQ | PIN_I2C | PIN_UART,           PIN_NONE, 0},
+	// D6: P0, UART2_TX, I2C2_SCL
+	{GPIO0,  PIN_GPIO | PIN_IRQ | PIN_I2C | PIN_UART,           PIN_NONE, 0},
+	// D7: P21, I2C1_SDA, TMS, MCLK, ^FCS
+	{GPIO21, PIN_GPIO | PIN_IRQ | PIN_I2C | PIN_I2S | PIN_JTAG, PIN_NONE, 0},
+};
+
+PinInfo *lt_arduino_pin_gpio_map[] = {
+	[0]  = &(lt_arduino_pin_info_list[6]), // GPIO0 (D6)
+	[1]  = &(lt_arduino_pin_info_list[5]), // GPIO1 (D5)
+	[6]  = &(lt_arduino_pin_info_list[1]), // GPIO6 (D1)
+	[10] = &(lt_arduino_pin_info_list[4]), // GPIO10 (D4)
+	[11] = &(lt_arduino_pin_info_list[3]), // GPIO11 (D3)
+	[21] = &(lt_arduino_pin_info_list[7]), // GPIO21 (D7)
+	[24] = &(lt_arduino_pin_info_list[0]), // GPIO24 (D0)
+	[26] = &(lt_arduino_pin_info_list[2]), // GPIO26 (D2)
+};
+// clang-format on

boards/variants/cblc5.h

@@ -0,0 +1,76 @@
+/* This file was auto-generated from cblc5.json using boardgen */
+
+#pragma once
+
+// clang-format off
+
+// Pins
+// ----
+#define PINS_COUNT         8  // Total GPIO count
+#define NUM_DIGITAL_PINS   8  // Digital inputs/outputs
+#define NUM_ANALOG_INPUTS  0  // ADC inputs
+#define NUM_ANALOG_OUTPUTS 3  // PWM & DAC outputs
+#define PINS_GPIO_MAX      26 // Last usable GPIO number
+
+// Wire Interfaces
+// ---------------
+#define PIN_WIRE2_SCL 0u // GPIO0
+#define PIN_WIRE2_SDA 1u // GPIO1
+
+// Serial ports
+// ------------
+#define PIN_SERIAL1_RX 10u // GPIO10
+#define PIN_SERIAL1_TX 11u // GPIO11
+#define PIN_SERIAL2_RX 1u  // GPIO1
+#define PIN_SERIAL2_TX 0u  // GPIO0
+
+// Pin function macros
+// -------------------
+#define PIN_P0   0u  // GPIO0
+#define PIN_P1   1u  // GPIO1
+#define PIN_P6   6u  // GPIO6
+#define PIN_P10  10u // GPIO10
+#define PIN_P11  11u // GPIO11
+#define PIN_P21  21u // GPIO21
+#define PIN_P24  24u // GPIO24
+#define PIN_P26  26u // GPIO26
+#define PIN_PWM0 6u  // GPIO6
+#define PIN_PWM4 24u // GPIO24
+#define PIN_PWM5 26u // GPIO26
+#define PIN_RX1  10u // GPIO10
+#define PIN_RX2  1u  // GPIO1
+#define PIN_SCL2 0u  // GPIO0
+#define PIN_SDA1 21u // GPIO21
+#define PIN_SDA2 1u  // GPIO1
+#define PIN_TX1  11u // GPIO11
+#define PIN_TX2  0u  // GPIO0
+
+// Port availability
+// -----------------
+#define HAS_SERIAL1             1
+#define HAS_SERIAL2             1
+#define HAS_WIRE2               1
+#define SERIAL_INTERFACES_COUNT 2
+#define WIRE_INTERFACES_COUNT   1
+
+// Arduino pin names
+// -----------------
+#define PIN_D0 24u // GPIO24
+#define PIN_D1 6u  // GPIO6
+#define PIN_D2 26u // GPIO26
+#define PIN_D3 11u // GPIO11
+#define PIN_D4 10u // GPIO10
+#define PIN_D5 1u  // GPIO1
+#define PIN_D6 0u  // GPIO0
+#define PIN_D7 21u // GPIO21
+
+// Static pin names
+// ----------------
+static const unsigned char D0 = PIN_D0;
+static const unsigned char D1 = PIN_D1;
+static const unsigned char D2 = PIN_D2;
+static const unsigned char D3 = PIN_D3;
+static const unsigned char D4 = PIN_D4;
+static const unsigned char D5 = PIN_D5;
+static const unsigned char D6 = PIN_D6;
+static const unsigned char D7 = PIN_D7;

boards/variants/cbu.c

@@ -0,0 +1,72 @@
+/* This file was auto-generated from cbu.json using boardgen */
+
+#include <Arduino.h>
+
+#ifdef LT_VARIANT_INCLUDE
+#include LT_VARIANT_INCLUDE
+#endif
+
+// clang-format off
+PinInfo lt_arduino_pin_info_list[PINS_COUNT] = {
+	// D0: P14, SD_CLK, SCK
+	{GPIO14, PIN_GPIO | PIN_IRQ | PIN_SPI,                      PIN_NONE, 0},
+	// D1: P16, SD_D0, MOSI
+	{GPIO16, PIN_GPIO | PIN_IRQ | PIN_SPI,                      PIN_NONE, 0},
+	// D2: P20, I2C1_SCL, TCK, FSCK
+	{GPIO20, PIN_GPIO | PIN_IRQ | PIN_I2C | PIN_JTAG,           PIN_NONE, 0},
+	// D3: P22, TDI, FSI
+	{GPIO22, PIN_GPIO | PIN_IRQ | PIN_JTAG,                     PIN_NONE, 0},
+	// D4: P23, ADC3, TDO, FSO
+	{GPIO23, PIN_GPIO | PIN_IRQ | PIN_ADC | PIN_JTAG,           PIN_NONE, 0},
+	// D5: P1, UART2_RX, I2C2_SDA
+	{GPIO1,  PIN_GPIO | PIN_IRQ | PIN_I2C | PIN_UART,           PIN_NONE, 0},
+	// D6: P0, UART2_TX, I2C2_SCL
+	{GPIO0,  PIN_GPIO | PIN_IRQ | PIN_I2C | PIN_UART,           PIN_NONE, 0},
+	// D7: P8, PWM2
+	{GPIO8,  PIN_GPIO | PIN_IRQ | PIN_PWM,                      PIN_NONE, 0},
+	// D8: P7, PWM1
+	{GPIO7,  PIN_GPIO | PIN_IRQ | PIN_PWM,                      PIN_NONE, 0},
+	// D9: P6, PWM0
+	{GPIO6,  PIN_GPIO | PIN_IRQ | PIN_PWM,                      PIN_NONE, 0},
+	// D10: P26, PWM5, IRDA
+	{GPIO26, PIN_GPIO | PIN_IRQ | PIN_PWM,                      PIN_NONE, 0},
+	// D11: P24, PWM4
+	{GPIO24, PIN_GPIO | PIN_IRQ | PIN_PWM,                      PIN_NONE, 0},
+	// D12: P11, UART1_TX
+	{GPIO11, PIN_GPIO | PIN_IRQ | PIN_UART,                     PIN_NONE, 0},
+	// D13: P10, UART1_RX
+	{GPIO10, PIN_GPIO | PIN_IRQ | PIN_UART,                     PIN_NONE, 0},
+	// D14: P28, DN
+	{GPIO28, PIN_GPIO | PIN_IRQ,                                PIN_NONE, 0},
+	// D15: P9, PWM3
+	{GPIO9,  PIN_GPIO | PIN_IRQ | PIN_PWM,                      PIN_NONE, 0},
+	// D16: P17, SD_D1, MISO
+	{GPIO17, PIN_GPIO | PIN_IRQ | PIN_SPI,                      PIN_NONE, 0},
+	// D17: P15, SD_CMD, CS
+	{GPIO15, PIN_GPIO | PIN_IRQ | PIN_SPI,                      PIN_NONE, 0},
+	// D18: P21, I2C1_SDA, TMS, MCLK, ^FCS
+	{GPIO21, PIN_GPIO | PIN_IRQ | PIN_I2C | PIN_I2S | PIN_JTAG, PIN_NONE, 0},
+};
+
+PinInfo *lt_arduino_pin_gpio_map[] = {
+	[0]  = &(lt_arduino_pin_info_list[6]),  // GPIO0 (D6)
+	[1]  = &(lt_arduino_pin_info_list[5]),  // GPIO1 (D5)
+	[6]  = &(lt_arduino_pin_info_list[9]),  // GPIO6 (D9)
+	[7]  = &(lt_arduino_pin_info_list[8]),  // GPIO7 (D8)
+	[8]  = &(lt_arduino_pin_info_list[7]),  // GPIO8 (D7)
+	[9]  = &(lt_arduino_pin_info_list[15]), // GPIO9 (D15)
+	[10] = &(lt_arduino_pin_info_list[13]), // GPIO10 (D13)
+	[11] = &(lt_arduino_pin_info_list[12]), // GPIO11 (D12)
+	[14] = &(lt_arduino_pin_info_list[0]),  // GPIO14 (D0)
+	[15] = &(lt_arduino_pin_info_list[17]), // GPIO15 (D17)
+	[16] = &(lt_arduino_pin_info_list[1]),  // GPIO16 (D1)
+	[17] = &(lt_arduino_pin_info_list[16]), // GPIO17 (D16)
+	[20] = &(lt_arduino_pin_info_list[2]),  // GPIO20 (D2)
+	[21] = &(lt_arduino_pin_info_list[18]), // GPIO21 (D18)
+	[22] = &(lt_arduino_pin_info_list[3]),  // GPIO22 (D3)
+	[23] = &(lt_arduino_pin_info_list[4]),  // GPIO23 (D4)
+	[24] = &(lt_arduino_pin_info_list[11]), // GPIO24 (D11)
+	[26] = &(lt_arduino_pin_info_list[10]), // GPIO26 (D10)
+	[28] = &(lt_arduino_pin_info_list[14]), // GPIO28 (D14)
+};
+// clang-format on

boards/variants/cbu.h

@@ -0,0 +1,123 @@
+/* This file was auto-generated from cbu.json using boardgen */
+
+#pragma once
+
+// clang-format off
+
+// Pins
+// ----
+#define PINS_COUNT         19 // Total GPIO count
+#define NUM_DIGITAL_PINS   19 // Digital inputs/outputs
+#define NUM_ANALOG_INPUTS  1  // ADC inputs
+#define NUM_ANALOG_OUTPUTS 6  // PWM & DAC outputs
+#define PINS_GPIO_MAX      28 // Last usable GPIO number
+
+// Wire Interfaces
+// ---------------
+#define PIN_WIRE1_SCL 20u // GPIO20
+#define PIN_WIRE1_SDA 21u // GPIO21
+#define PIN_WIRE2_SCL 0u  // GPIO0
+#define PIN_WIRE2_SDA 1u  // GPIO1
+
+// Serial ports
+// ------------
+#define PIN_SERIAL1_RX 10u // GPIO10
+#define PIN_SERIAL1_TX 11u // GPIO11
+#define PIN_SERIAL2_RX 1u  // GPIO1
+#define PIN_SERIAL2_TX 0u  // GPIO0
+
+// Pin function macros
+// -------------------
+#define PIN_ADC3 23u // GPIO23
+#define PIN_CS   15u // GPIO15
+#define PIN_MISO 17u // GPIO17
+#define PIN_MOSI 16u // GPIO16
+#define PIN_P0   0u  // GPIO0
+#define PIN_P1   1u  // GPIO1
+#define PIN_P6   6u  // GPIO6
+#define PIN_P7   7u  // GPIO7
+#define PIN_P8   8u  // GPIO8
+#define PIN_P9   9u  // GPIO9
+#define PIN_P10  10u // GPIO10
+#define PIN_P11  11u // GPIO11
+#define PIN_P14  14u // GPIO14
+#define PIN_P15  15u // GPIO15
+#define PIN_P16  16u // GPIO16
+#define PIN_P17  17u // GPIO17
+#define PIN_P20  20u // GPIO20
+#define PIN_P21  21u // GPIO21
+#define PIN_P22  22u // GPIO22
+#define PIN_P23  23u // GPIO23
+#define PIN_P24  24u // GPIO24
+#define PIN_P26  26u // GPIO26
+#define PIN_P28  28u // GPIO28
+#define PIN_PWM0 6u  // GPIO6
+#define PIN_PWM1 7u  // GPIO7
+#define PIN_PWM2 8u  // GPIO8
+#define PIN_PWM3 9u  // GPIO9
+#define PIN_PWM4 24u // GPIO24
+#define PIN_PWM5 26u // GPIO26
+#define PIN_RX1  10u // GPIO10
+#define PIN_RX2  1u  // GPIO1
+#define PIN_SCK  14u // GPIO14
+#define PIN_SCL1 20u // GPIO20
+#define PIN_SCL2 0u  // GPIO0
+#define PIN_SDA1 21u // GPIO21
+#define PIN_SDA2 1u  // GPIO1
+#define PIN_TX1  11u // GPIO11
+#define PIN_TX2  0u  // GPIO0
+
+// Port availability
+// -----------------
+#define HAS_SERIAL1             1
+#define HAS_SERIAL2             1
+#define HAS_WIRE1               1
+#define HAS_WIRE2               1
+#define SERIAL_INTERFACES_COUNT 2
+#define WIRE_INTERFACES_COUNT   2
+
+// Arduino pin names
+// -----------------
+#define PIN_D0  14u // GPIO14
+#define PIN_D1  16u // GPIO16
+#define PIN_D2  20u // GPIO20
+#define PIN_D3  22u // GPIO22
+#define PIN_D4  23u // GPIO23
+#define PIN_D5  1u  // GPIO1
+#define PIN_D6  0u  // GPIO0
+#define PIN_D7  8u  // GPIO8
+#define PIN_D8  7u  // GPIO7
+#define PIN_D9  6u  // GPIO6
+#define PIN_D10 26u // GPIO26
+#define PIN_D11 24u // GPIO24
+#define PIN_D12 11u // GPIO11
+#define PIN_D13 10u // GPIO10
+#define PIN_D14 28u // GPIO28
+#define PIN_D15 9u  // GPIO9
+#define PIN_D16 17u // GPIO17
+#define PIN_D17 15u // GPIO15
+#define PIN_D18 21u // GPIO21
+#define PIN_A0  23u // GPIO23
+
+// Static pin names
+// ----------------
+static const unsigned char A0 = PIN_A0;
+static const unsigned char D0 = PIN_D0;
+static const unsigned char D1 = PIN_D1;
+static const unsigned char D2 = PIN_D2;
+static const unsigned char D3 = PIN_D3;
+static const unsigned char D4 = PIN_D4;
+static const unsigned char D5 = PIN_D5;
+static const unsigned char D6 = PIN_D6;
+static const unsigned char D7 = PIN_D7;
+static const unsigned char D8 = PIN_D8;
+static const unsigned char D9 = PIN_D9;
+static const unsigned char D10 = PIN_D10;
+static const unsigned char D11 = PIN_D11;
+static const unsigned char D12 = PIN_D12;
+static const unsigned char D13 = PIN_D13;
+static const unsigned char D14 = PIN_D14;
+static const unsigned char D15 = PIN_D15;
+static const unsigned char D16 = PIN_D16;
+static const unsigned char D17 = PIN_D17;
+static const unsigned char D18 = PIN_D18;

boards/variants/generic-bk7252.c

@@ -42,7 +42,7 @@ PinInfo lt_arduino_pin_info_list[PINS_COUNT] = {
 	{GPIO17, PIN_GPIO | PIN_IRQ | PIN_SPI,                      PIN_NONE, 0},
 	// D16: P18, SD_D2
 	{GPIO18, PIN_GPIO | PIN_IRQ,                                PIN_NONE, 0},
-	// D17: P19, SD_D1
+	// D17: P19, SD_D3
 	{GPIO19, PIN_GPIO | PIN_IRQ,                                PIN_NONE, 0},
 	// D18: P20, I2C1_SCL, TCK, FSCK
 	{GPIO20, PIN_GPIO | PIN_IRQ | PIN_I2C | PIN_JTAG,           PIN_NONE, 0},

boards/variants/t102-v1.1.c

@@ -0,0 +1,42 @@
+/* This file was auto-generated from t102-v1.1.json using boardgen */
+
+#include <Arduino.h>
+
+#ifdef LT_VARIANT_INCLUDE
+#include LT_VARIANT_INCLUDE
+#endif
+
+// clang-format off
+PinInfo lt_arduino_pin_info_list[PINS_COUNT] = {
+	// D0: PA12, PWM3
+	{PA_12, PIN_GPIO | PIN_IRQ | PIN_PWM,                                PIN_NONE, 0},
+	// D1: PA00, PWM2
+	{PA_0,  PIN_GPIO | PIN_IRQ | PIN_PWM,                                PIN_NONE, 0},
+	// D2: PA05, PWM4, WAKE1
+	{PA_5,  PIN_GPIO | PIN_IRQ | PIN_PWM,                                PIN_NONE, 0},
+	// D3: PA30, UART2_TX, I2C0_SDA, PWM4
+	{PA_30, PIN_GPIO | PIN_IRQ | PIN_PWM | PIN_I2C | PIN_UART,           PIN_NONE, 0},
+	// D4: PA29, UART2_RX, I2C0_SCL, PWM4
+	{PA_29, PIN_GPIO | PIN_IRQ | PIN_PWM | PIN_I2C | PIN_UART,           PIN_NONE, 0},
+	// D5: PA18, UART0_RX, SPI0_SCK, SPI1_SCK, I2C1_SCL, SD_D2, TMR4_TRIG, I2S0_MCK, WAKE0
+	{PA_18, PIN_GPIO | PIN_IRQ | PIN_I2C | PIN_I2S | PIN_SPI | PIN_UART, PIN_NONE, 0},
+	// D6: PA23, UART0_TX, SPI0_MOSI, SPI1_MOSI, I2C1_SDA, SD_D1, PWM0, WAKE3
+	{PA_23, PIN_GPIO | PIN_IRQ | PIN_PWM | PIN_I2C | PIN_SPI | PIN_UART, PIN_NONE, 0},
+	// D7: PA14, PWM0, SWCLK
+	{PA_14, PIN_GPIO | PIN_IRQ | PIN_PWM | PIN_SWD,                      PIN_NONE, 0},
+	// D8: PA15, PWM1, SWDIO
+	{PA_15, PIN_GPIO | PIN_IRQ | PIN_PWM | PIN_SWD,                      PIN_NONE, 0},
+};
+
+PinInfo *lt_arduino_pin_gpio_map[] = {
+	[0]  = &(lt_arduino_pin_info_list[1]), // PA_0 (D1)
+	[5]  = &(lt_arduino_pin_info_list[2]), // PA_5 (D2)
+	[12] = &(lt_arduino_pin_info_list[0]), // PA_12 (D0)
+	[14] = &(lt_arduino_pin_info_list[7]), // PA_14 (D7)
+	[15] = &(lt_arduino_pin_info_list[8]), // PA_15 (D8)
+	[18] = &(lt_arduino_pin_info_list[5]), // PA_18 (D5)
+	[23] = &(lt_arduino_pin_info_list[6]), // PA_23 (D6)
+	[29] = &(lt_arduino_pin_info_list[4]), // PA_29 (D4)
+	[30] = &(lt_arduino_pin_info_list[3]), // PA_30 (D3)
+};
+// clang-format on

boards/variants/t102-v1.1.h

@@ -0,0 +1,89 @@
+/* This file was auto-generated from t102-v1.1.json using boardgen */
+
+#pragma once
+
+// clang-format off
+
+// Pins
+// ----
+#define PINS_COUNT         9  // Total GPIO count
+#define NUM_DIGITAL_PINS   9  // Digital inputs/outputs
+#define NUM_ANALOG_INPUTS  0  // ADC inputs
+#define NUM_ANALOG_OUTPUTS 8  // PWM & DAC outputs
+#define PINS_GPIO_MAX      30 // Last usable GPIO number
+
+// Wire Interfaces
+// ---------------
+#define PIN_WIRE0_SCL 29u // PA_29
+#define PIN_WIRE0_SDA 30u // PA_30
+#define PIN_WIRE1_SCL 18u // PA_18
+#define PIN_WIRE1_SDA 23u // PA_23
+
+// Serial ports
+// ------------
+#define PIN_SERIAL0_RX 18u // PA_18
+#define PIN_SERIAL0_TX 23u // PA_23
+#define PIN_SERIAL2_RX 29u // PA_29
+#define PIN_SERIAL2_TX 30u // PA_30
+
+// Pin function macros
+// -------------------
+#define PIN_MOSI0 23u // PA_23
+#define PIN_MOSI1 23u // PA_23
+#define PIN_PA00  0u  // PA_0
+#define PIN_PA05  5u  // PA_5
+#define PIN_PA12  12u // PA_12
+#define PIN_PA14  14u // PA_14
+#define PIN_PA15  15u // PA_15
+#define PIN_PA18  18u // PA_18
+#define PIN_PA23  23u // PA_23
+#define PIN_PA29  29u // PA_29
+#define PIN_PA30  30u // PA_30
+#define PIN_PWM0  14u // PA_14
+#define PIN_PWM1  15u // PA_15
+#define PIN_PWM2  0u  // PA_0
+#define PIN_PWM3  12u // PA_12
+#define PIN_PWM4  29u // PA_29
+#define PIN_RX0   18u // PA_18
+#define PIN_RX2   29u // PA_29
+#define PIN_SCK0  18u // PA_18
+#define PIN_SCK1  18u // PA_18
+#define PIN_SCL0  29u // PA_29
+#define PIN_SCL1  18u // PA_18
+#define PIN_SDA0  30u // PA_30
+#define PIN_SDA1  23u // PA_23
+#define PIN_TX0   23u // PA_23
+#define PIN_TX2   30u // PA_30
+
+// Port availability
+// -----------------
+#define HAS_SERIAL0             1
+#define HAS_SERIAL2             1
+#define HAS_WIRE0               1
+#define HAS_WIRE1               1
+#define SERIAL_INTERFACES_COUNT 2
+#define WIRE_INTERFACES_COUNT   2
+
+// Arduino pin names
+// -----------------
+#define PIN_D0 12u // PA_12
+#define PIN_D1 0u  // PA_0
+#define PIN_D2 5u  // PA_5
+#define PIN_D3 30u // PA_30
+#define PIN_D4 29u // PA_29
+#define PIN_D5 18u // PA_18
+#define PIN_D6 23u // PA_23
+#define PIN_D7 14u // PA_14
+#define PIN_D8 15u // PA_15
+
+// Static pin names
+// ----------------
+static const unsigned char D0 = PIN_D0;
+static const unsigned char D1 = PIN_D1;
+static const unsigned char D2 = PIN_D2;
+static const unsigned char D3 = PIN_D3;
+static const unsigned char D4 = PIN_D4;
+static const unsigned char D5 = PIN_D5;
+static const unsigned char D6 = PIN_D6;
+static const unsigned char D7 = PIN_D7;
+static const unsigned char D8 = PIN_D8;

boards/variants/t103-v1.0.c

@@ -0,0 +1,51 @@
+/* This file was auto-generated from t103-v1.0.json using boardgen */
+
+#include <Arduino.h>
+
+#ifdef LT_VARIANT_INCLUDE
+#include LT_VARIANT_INCLUDE
+#endif
+
+// clang-format off
+PinInfo lt_arduino_pin_info_list[PINS_COUNT] = {
+	// D0: PA19, ADC1, UART0_CTS, SPI0_CS, SPI1_CS, I2C0_SDA, SD_D3, TMR5_TRIG, I2S0_TX
+	{PA_19, PIN_GPIO | PIN_IRQ | PIN_ADC | PIN_I2C | PIN_I2S | PIN_SPI | PIN_UART, PIN_NONE, 0},
+	// D1: PA14, PWM0, SWCLK
+	{PA_14, PIN_GPIO | PIN_IRQ | PIN_PWM | PIN_SWD,                                PIN_NONE, 0},
+	// D2: PA15, PWM1, SWDIO
+	{PA_15, PIN_GPIO | PIN_IRQ | PIN_PWM | PIN_SWD,                                PIN_NONE, 0},
+	// D3: PA00, PWM2
+	{PA_0,  PIN_GPIO | PIN_IRQ | PIN_PWM,                                          PIN_NONE, 0},
+	// D4: PA22, UART0_RTS, SPI0_MISO, SPI1_MISO, I2C0_SCL, SD_D0, PWM5, I2S0_WS, WAKE2
+	{PA_22, PIN_GPIO | PIN_IRQ | PIN_PWM | PIN_I2C | PIN_I2S | PIN_SPI | PIN_UART, PIN_NONE, 0},
+	// D5: PA29, UART2_RX, I2C0_SCL, PWM4
+	{PA_29, PIN_GPIO | PIN_IRQ | PIN_PWM | PIN_I2C | PIN_UART,                     PIN_NONE, 0},
+	// D6: PA30, UART2_TX, I2C0_SDA, PWM4
+	{PA_30, PIN_GPIO | PIN_IRQ | PIN_PWM | PIN_I2C | PIN_UART,                     PIN_NONE, 0},
+	// D7: PA05, PWM4, WAKE1
+	{PA_5,  PIN_GPIO | PIN_IRQ | PIN_PWM,                                          PIN_NONE, 0},
+	// D8: PA12, PWM3
+	{PA_12, PIN_GPIO | PIN_IRQ | PIN_PWM,                                          PIN_NONE, 0},
+	// D9: PA18, UART0_RX, SPI0_SCK, SPI1_SCK, I2C1_SCL, SD_D2, TMR4_TRIG, I2S0_MCK, WAKE0
+	{PA_18, PIN_GPIO | PIN_IRQ | PIN_I2C | PIN_I2S | PIN_SPI | PIN_UART,           PIN_NONE, 0},
+	// D10: PA23, UART0_TX, SPI0_MOSI, SPI1_MOSI, I2C1_SDA, SD_D1, PWM0, WAKE3
+	{PA_23, PIN_GPIO | PIN_IRQ | PIN_PWM | PIN_I2C | PIN_SPI | PIN_UART,           PIN_NONE, 0},
+	// A1: ADC2
+	{AD_2,  PIN_ADC,                                                               PIN_NONE, 0},
+};
+
+PinInfo *lt_arduino_pin_gpio_map[] = {
+	[0]  = &(lt_arduino_pin_info_list[3]),  // PA_0 (D3)
+	[5]  = &(lt_arduino_pin_info_list[7]),  // PA_5 (D7)
+	[12] = &(lt_arduino_pin_info_list[8]),  // PA_12 (D8)
+	[14] = &(lt_arduino_pin_info_list[1]),  // PA_14 (D1)
+	[15] = &(lt_arduino_pin_info_list[2]),  // PA_15 (D2)
+	[18] = &(lt_arduino_pin_info_list[9]),  // PA_18 (D9)
+	[19] = &(lt_arduino_pin_info_list[0]),  // PA_19 (D0)
+	[22] = &(lt_arduino_pin_info_list[4]),  // PA_22 (D4)
+	[23] = &(lt_arduino_pin_info_list[10]), // PA_23 (D10)
+	[29] = &(lt_arduino_pin_info_list[5]),  // PA_29 (D5)
+	[30] = &(lt_arduino_pin_info_list[6]),  // PA_30 (D6)
+	[41] = &(lt_arduino_pin_info_list[11]), // AD_2 (A1)
+};
+// clang-format on

boards/variants/t103-v1.0.h

@@ -0,0 +1,126 @@
+/* This file was auto-generated from t103-v1.0.json using boardgen */
+
+#pragma once
+
+// clang-format off
+
+// Pins
+// ----
+#define PINS_COUNT         12 // Total GPIO count
+#define NUM_DIGITAL_PINS   11 // Digital inputs/outputs
+#define NUM_ANALOG_INPUTS  2  // ADC inputs
+#define NUM_ANALOG_OUTPUTS 9  // PWM & DAC outputs
+#define PINS_GPIO_MAX      41 // Last usable GPIO number
+
+// SPI Interfaces
+// --------------
+#define PIN_SPI0_CS   19u // PA_19
+#define PIN_SPI0_MISO 22u // PA_22
+#define PIN_SPI0_MOSI 23u // PA_23
+#define PIN_SPI0_SCK  18u // PA_18
+#define PIN_SPI1_CS   19u // PA_19
+#define PIN_SPI1_MISO 22u // PA_22
+#define PIN_SPI1_MOSI 23u // PA_23
+#define PIN_SPI1_SCK  18u // PA_18
+
+// Wire Interfaces
+// ---------------
+#define PIN_WIRE0_SCL_0 22u // PA_22
+#define PIN_WIRE0_SCL_1 29u // PA_29
+#define PIN_WIRE0_SDA_0 19u // PA_19
+#define PIN_WIRE0_SDA_1 30u // PA_30
+#define PIN_WIRE1_SCL   18u // PA_18
+#define PIN_WIRE1_SDA   23u // PA_23
+
+// Serial ports
+// ------------
+#define PIN_SERIAL0_CTS 19u // PA_19
+#define PIN_SERIAL0_RTS 22u // PA_22
+#define PIN_SERIAL0_RX  18u // PA_18
+#define PIN_SERIAL0_TX  23u // PA_23
+#define PIN_SERIAL2_RX  29u // PA_29
+#define PIN_SERIAL2_TX  30u // PA_30
+
+// Pin function macros
+// -------------------
+#define PIN_ADC1  19u // PA_19
+#define PIN_ADC2  41u // AD_2
+#define PIN_CS0   19u // PA_19
+#define PIN_CS1   19u // PA_19
+#define PIN_CTS0  19u // PA_19
+#define PIN_MISO0 22u // PA_22
+#define PIN_MISO1 22u // PA_22
+#define PIN_MOSI0 23u // PA_23
+#define PIN_MOSI1 23u // PA_23
+#define PIN_PA00  0u  // PA_0
+#define PIN_PA05  5u  // PA_5
+#define PIN_PA12  12u // PA_12
+#define PIN_PA14  14u // PA_14
+#define PIN_PA15  15u // PA_15
+#define PIN_PA18  18u // PA_18
+#define PIN_PA19  19u // PA_19
+#define PIN_PA22  22u // PA_22
+#define PIN_PA23  23u // PA_23
+#define PIN_PA29  29u // PA_29
+#define PIN_PA30  30u // PA_30
+#define PIN_PWM0  23u // PA_23
+#define PIN_PWM1  15u // PA_15
+#define PIN_PWM2  0u  // PA_0
+#define PIN_PWM3  12u // PA_12
+#define PIN_PWM4  5u  // PA_5
+#define PIN_PWM5  22u // PA_22
+#define PIN_RTS0  22u // PA_22
+#define PIN_RX0   18u // PA_18
+#define PIN_RX2   29u // PA_29
+#define PIN_SCK0  18u // PA_18
+#define PIN_SCK1  18u // PA_18
+#define PIN_SCL0  29u // PA_29
+#define PIN_SCL1  18u // PA_18
+#define PIN_SDA0  30u // PA_30
+#define PIN_SDA1  23u // PA_23
+#define PIN_TX0   23u // PA_23
+#define PIN_TX2   30u // PA_30
+
+// Port availability
+// -----------------
+#define HAS_SERIAL0             1
+#define HAS_SERIAL2             1
+#define HAS_SPI0                1
+#define HAS_SPI1                1
+#define HAS_WIRE0               1
+#define HAS_WIRE1               1
+#define SERIAL_INTERFACES_COUNT 2
+#define SPI_INTERFACES_COUNT    2
+#define WIRE_INTERFACES_COUNT   2
+
+// Arduino pin names
+// -----------------
+#define PIN_D0  19u // PA_19
+#define PIN_D1  14u // PA_14
+#define PIN_D2  15u // PA_15
+#define PIN_D3  0u  // PA_0
+#define PIN_D4  22u // PA_22
+#define PIN_D5  29u // PA_29
+#define PIN_D6  30u // PA_30
+#define PIN_D7  5u  // PA_5
+#define PIN_D8  12u // PA_12
+#define PIN_D9  18u // PA_18
+#define PIN_D10 23u // PA_23
+#define PIN_A0  19u // PA_19
+#define PIN_A1  41u // AD_2
+
+// Static pin names
+// ----------------
+static const unsigned char A0 = PIN_A0;
+static const unsigned char A1 = PIN_A1;
+static const unsigned char D0 = PIN_D0;
+static const unsigned char D1 = PIN_D1;
+static const unsigned char D2 = PIN_D2;
+static const unsigned char D3 = PIN_D3;
+static const unsigned char D4 = PIN_D4;
+static const unsigned char D5 = PIN_D5;
+static const unsigned char D6 = PIN_D6;
+static const unsigned char D7 = PIN_D7;
+static const unsigned char D8 = PIN_D8;
+static const unsigned char D9 = PIN_D9;
+static const unsigned char D10 = PIN_D10;

boards/variants/wa2.c

@@ -0,0 +1,54 @@
+/* This file was auto-generated from wa2.json using boardgen */
+
+#include <Arduino.h>
+
+#ifdef LT_VARIANT_INCLUDE
+#include LT_VARIANT_INCLUDE
+#endif
+
+// clang-format off
+PinInfo lt_arduino_pin_info_list[PINS_COUNT] = {
+	// D0: P8, PWM2
+	{GPIO8,  PIN_GPIO | PIN_IRQ | PIN_PWM,            PIN_NONE, 0},
+	// D1: P7, PWM1
+	{GPIO7,  PIN_GPIO | PIN_IRQ | PIN_PWM,            PIN_NONE, 0},
+	// D2: P6, PWM0
+	{GPIO6,  PIN_GPIO | PIN_IRQ | PIN_PWM,            PIN_NONE, 0},
+	// D3: P23, ADC3, TDO, FSO
+	{GPIO23, PIN_GPIO | PIN_IRQ | PIN_ADC | PIN_JTAG, PIN_NONE, 0},
+	// D4: P10, UART1_RX
+	{GPIO10, PIN_GPIO | PIN_IRQ | PIN_UART,           PIN_NONE, 0},
+	// D5: P11, UART1_TX
+	{GPIO11, PIN_GPIO | PIN_IRQ | PIN_UART,           PIN_NONE, 0},
+	// D6: P18, SD_D2, PWM4
+	{GPIO18, PIN_GPIO | PIN_IRQ | PIN_PWM,            PIN_NONE, 0},
+	// D7: P19, SD_D3, PWM5
+	{GPIO19, PIN_GPIO | PIN_IRQ | PIN_PWM,            PIN_NONE, 0},
+	// D8: P20, I2C1_SCL, TCK, FSCK
+	{GPIO20, PIN_GPIO | PIN_IRQ | PIN_I2C | PIN_JTAG, PIN_NONE, 0},
+	// D9: P4, ADC1, DIN
+	{GPIO4,  PIN_GPIO | PIN_IRQ | PIN_I2S,            PIN_NONE, 0},
+	// D10: P0, UART2_TX, I2C2_SCL
+	{GPIO0,  PIN_GPIO | PIN_IRQ | PIN_I2C | PIN_UART, PIN_NONE, 0},
+	// D11: P21, I2C1_SDA, TMS, ^FCS
+	{GPIO21, PIN_GPIO | PIN_IRQ | PIN_I2C | PIN_JTAG, PIN_NONE, 0},
+	// D12: P22, TDI, FSI
+	{GPIO22, PIN_GPIO | PIN_IRQ | PIN_JTAG,           PIN_NONE, 0},
+};
+
+PinInfo *lt_arduino_pin_gpio_map[] = {
+	[0]  = &(lt_arduino_pin_info_list[10]), // GPIO0 (D10)
+	[4]  = &(lt_arduino_pin_info_list[9]),  // GPIO4 (D9)
+	[6]  = &(lt_arduino_pin_info_list[2]),  // GPIO6 (D2)
+	[7]  = &(lt_arduino_pin_info_list[1]),  // GPIO7 (D1)
+	[8]  = &(lt_arduino_pin_info_list[0]),  // GPIO8 (D0)
+	[10] = &(lt_arduino_pin_info_list[4]),  // GPIO10 (D4)
+	[11] = &(lt_arduino_pin_info_list[5]),  // GPIO11 (D5)
+	[18] = &(lt_arduino_pin_info_list[6]),  // GPIO18 (D6)
+	[19] = &(lt_arduino_pin_info_list[7]),  // GPIO19 (D7)
+	[20] = &(lt_arduino_pin_info_list[8]),  // GPIO20 (D8)
+	[21] = &(lt_arduino_pin_info_list[11]), // GPIO21 (D11)
+	[22] = &(lt_arduino_pin_info_list[12]), // GPIO22 (D12)
+	[23] = &(lt_arduino_pin_info_list[3]),  // GPIO23 (D3)
+};
+// clang-format on

boards/variants/wa2.h

@@ -0,0 +1,95 @@
+/* This file was auto-generated from wa2.json using boardgen */
+
+#pragma once
+
+// clang-format off
+
+// Pins
+// ----
+#define PINS_COUNT         13 // Total GPIO count
+#define NUM_DIGITAL_PINS   13 // Digital inputs/outputs
+#define NUM_ANALOG_INPUTS  1  // ADC inputs
+#define NUM_ANALOG_OUTPUTS 5  // PWM & DAC outputs
+#define PINS_GPIO_MAX      23 // Last usable GPIO number
+
+// Wire Interfaces
+// ---------------
+#define PIN_WIRE1_SCL 20u // GPIO20
+#define PIN_WIRE1_SDA 21u // GPIO21
+
+// Serial ports
+// ------------
+#define PIN_SERIAL1_RX 10u // GPIO10
+#define PIN_SERIAL1_TX 11u // GPIO11
+#define PIN_SERIAL2_TX 0u  // GPIO0
+
+// Pin function macros
+// -------------------
+#define PIN_ADC1 4u  // GPIO4
+#define PIN_ADC3 23u // GPIO23
+#define PIN_P0   0u  // GPIO0
+#define PIN_P4   4u  // GPIO4
+#define PIN_P6   6u  // GPIO6
+#define PIN_P7   7u  // GPIO7
+#define PIN_P8   8u  // GPIO8
+#define PIN_P10  10u // GPIO10
+#define PIN_P11  11u // GPIO11
+#define PIN_P18  18u // GPIO18
+#define PIN_P19  19u // GPIO19
+#define PIN_P20  20u // GPIO20
+#define PIN_P21  21u // GPIO21
+#define PIN_P22  22u // GPIO22
+#define PIN_P23  23u // GPIO23
+#define PIN_PWM0 6u  // GPIO6
+#define PIN_PWM1 7u  // GPIO7
+#define PIN_PWM2 8u  // GPIO8
+#define PIN_PWM4 18u // GPIO18
+#define PIN_PWM5 19u // GPIO19
+#define PIN_RX1  10u // GPIO10
+#define PIN_SCL1 20u // GPIO20
+#define PIN_SCL2 0u  // GPIO0
+#define PIN_SDA1 21u // GPIO21
+#define PIN_TX1  11u // GPIO11
+#define PIN_TX2  0u  // GPIO0
+
+// Port availability
+// -----------------
+#define HAS_SERIAL1             1
+#define HAS_SERIAL2             1
+#define HAS_WIRE1               1
+#define SERIAL_INTERFACES_COUNT 2
+#define WIRE_INTERFACES_COUNT   1
+
+// Arduino pin names
+// -----------------
+#define PIN_D0  8u  // GPIO8
+#define PIN_D1  7u  // GPIO7
+#define PIN_D2  6u  // GPIO6
+#define PIN_D3  23u // GPIO23
+#define PIN_D4  10u // GPIO10
+#define PIN_D5  11u // GPIO11
+#define PIN_D6  18u // GPIO18
+#define PIN_D7  19u // GPIO19
+#define PIN_D8  20u // GPIO20
+#define PIN_D9  4u  // GPIO4
+#define PIN_D10 0u  // GPIO0
+#define PIN_D11 21u // GPIO21
+#define PIN_D12 22u // GPIO22
+#define PIN_A0  23u // GPIO23
+
+// Static pin names
+// ----------------
+static const unsigned char A0 = PIN_A0;
+static const unsigned char D0 = PIN_D0;
+static const unsigned char D1 = PIN_D1;
+static const unsigned char D2 = PIN_D2;
+static const unsigned char D3 = PIN_D3;
+static const unsigned char D4 = PIN_D4;
+static const unsigned char D5 = PIN_D5;
+static const unsigned char D6 = PIN_D6;
+static const unsigned char D7 = PIN_D7;
+static const unsigned char D8 = PIN_D8;
+static const unsigned char D9 = PIN_D9;
+static const unsigned char D10 = PIN_D10;
+static const unsigned char D11 = PIN_D11;
+static const unsigned char D12 = PIN_D12;

boards/variants/wb1s.c

@@ -0,0 +1,48 @@
+/* This file was auto-generated from wb1s.json using boardgen */
+
+#include <Arduino.h>
+
+#ifdef LT_VARIANT_INCLUDE
+#include LT_VARIANT_INCLUDE
+#endif
+
+// clang-format off
+PinInfo lt_arduino_pin_info_list[PINS_COUNT] = {
+	// D0: P11, UART1_TX
+	{GPIO11, PIN_GPIO | PIN_IRQ | PIN_UART,           PIN_NONE, 0},
+	// D1: P10, UART1_RX
+	{GPIO10, PIN_GPIO | PIN_IRQ | PIN_UART,           PIN_NONE, 0},
+	// D2: P26, PWM5, IRDA
+	{GPIO26, PIN_GPIO | PIN_IRQ | PIN_PWM,            PIN_NONE, 0},
+	// D3: P24, PWM4
+	{GPIO24, PIN_GPIO | PIN_IRQ | PIN_PWM,            PIN_NONE, 0},
+	// D4: P0, UART2_TX, I2C2_SCL
+	{GPIO0,  PIN_GPIO | PIN_IRQ | PIN_I2C | PIN_UART, PIN_NONE, 0},
+	// D5: P8, PWM2
+	{GPIO8,  PIN_GPIO | PIN_IRQ | PIN_PWM,            PIN_NONE, 0},
+	// D6: P7, PWM1
+	{GPIO7,  PIN_GPIO | PIN_IRQ | PIN_PWM,            PIN_NONE, 0},
+	// D7: P1, UART2_RX, I2C2_SDA
+	{GPIO1,  PIN_GPIO | PIN_IRQ | PIN_I2C | PIN_UART, PIN_NONE, 0},
+	// D8: P9, PWM3
+	{GPIO9,  PIN_GPIO | PIN_IRQ | PIN_PWM,            PIN_NONE, 0},
+	// D9: P6, PWM0
+	{GPIO6,  PIN_GPIO | PIN_IRQ | PIN_PWM,            PIN_NONE, 0},
+	// D10: P23, ADC3, TDO, FSO
+	{GPIO23, PIN_GPIO | PIN_IRQ | PIN_ADC | PIN_JTAG, PIN_NONE, 0},
+};
+
+PinInfo *lt_arduino_pin_gpio_map[] = {
+	[0]  = &(lt_arduino_pin_info_list[4]),  // GPIO0 (D4)
+	[1]  = &(lt_arduino_pin_info_list[7]),  // GPIO1 (D7)
+	[6]  = &(lt_arduino_pin_info_list[9]),  // GPIO6 (D9)
+	[7]  = &(lt_arduino_pin_info_list[6]),  // GPIO7 (D6)
+	[8]  = &(lt_arduino_pin_info_list[5]),  // GPIO8 (D5)
+	[9]  = &(lt_arduino_pin_info_list[8]),  // GPIO9 (D8)
+	[10] = &(lt_arduino_pin_info_list[1]),  // GPIO10 (D1)
+	[11] = &(lt_arduino_pin_info_list[0]),  // GPIO11 (D0)
+	[23] = &(lt_arduino_pin_info_list[10]), // GPIO23 (D10)
+	[24] = &(lt_arduino_pin_info_list[3]),  // GPIO24 (D3)
+	[26] = &(lt_arduino_pin_info_list[2]),  // GPIO26 (D2)
+};
+// clang-format on

boards/variants/wb1s.h

@@ -0,0 +1,90 @@
+/* This file was auto-generated from wb1s.json using boardgen */
+
+#pragma once
+
+// clang-format off
+
+// Pins
+// ----
+#define PINS_COUNT         11 // Total GPIO count
+#define NUM_DIGITAL_PINS   11 // Digital inputs/outputs
+#define NUM_ANALOG_INPUTS  1  // ADC inputs
+#define NUM_ANALOG_OUTPUTS 6  // PWM & DAC outputs
+#define PINS_GPIO_MAX      26 // Last usable GPIO number
+
+// Wire Interfaces
+// ---------------
+#define PIN_WIRE2_SCL 0u // GPIO0
+#define PIN_WIRE2_SDA 1u // GPIO1
+
+// Serial ports
+// ------------
+#define PIN_SERIAL1_RX 10u // GPIO10
+#define PIN_SERIAL1_TX 11u // GPIO11
+#define PIN_SERIAL2_RX 1u  // GPIO1
+#define PIN_SERIAL2_TX 0u  // GPIO0
+
+// Pin function macros
+// -------------------
+#define PIN_ADC3 23u // GPIO23
+#define PIN_P0   0u  // GPIO0
+#define PIN_P1   1u  // GPIO1
+#define PIN_P6   6u  // GPIO6
+#define PIN_P7   7u  // GPIO7
+#define PIN_P8   8u  // GPIO8
+#define PIN_P9   9u  // GPIO9
+#define PIN_P10  10u // GPIO10
+#define PIN_P11  11u // GPIO11
+#define PIN_P23  23u // GPIO23
+#define PIN_P24  24u // GPIO24
+#define PIN_P26  26u // GPIO26
+#define PIN_PWM0 6u  // GPIO6
+#define PIN_PWM1 7u  // GPIO7
+#define PIN_PWM2 8u  // GPIO8
+#define PIN_PWM3 9u  // GPIO9
+#define PIN_PWM4 24u // GPIO24
+#define PIN_PWM5 26u // GPIO26
+#define PIN_RX1  10u // GPIO10
+#define PIN_RX2  1u  // GPIO1
+#define PIN_SCL2 0u  // GPIO0
+#define PIN_SDA2 1u  // GPIO1
+#define PIN_TX1  11u // GPIO11
+#define PIN_TX2  0u  // GPIO0
+
+// Port availability
+// -----------------
+#define HAS_SERIAL1             1
+#define HAS_SERIAL2             1
+#define HAS_WIRE2               1
+#define SERIAL_INTERFACES_COUNT 2
+#define WIRE_INTERFACES_COUNT   1
+
+// Arduino pin names
+// -----------------
+#define PIN_D0  11u // GPIO11
+#define PIN_D1  10u // GPIO10
+#define PIN_D2  26u // GPIO26
+#define PIN_D3  24u // GPIO24
+#define PIN_D4  0u  // GPIO0
+#define PIN_D5  8u  // GPIO8
+#define PIN_D6  7u  // GPIO7
+#define PIN_D7  1u  // GPIO1
+#define PIN_D8  9u  // GPIO9
+#define PIN_D9  6u  // GPIO6
+#define PIN_D10 23u // GPIO23
+#define PIN_A0  23u // GPIO23
+
+// Static pin names
+// ----------------
+static const unsigned char A0 = PIN_A0;
+static const unsigned char D0 = PIN_D0;
+static const unsigned char D1 = PIN_D1;
+static const unsigned char D2 = PIN_D2;
+static const unsigned char D3 = PIN_D3;
+static const unsigned char D4 = PIN_D4;
+static const unsigned char D5 = PIN_D5;
+static const unsigned char D6 = PIN_D6;
+static const unsigned char D7 = PIN_D7;
+static const unsigned char D8 = PIN_D8;
+static const unsigned char D9 = PIN_D9;
+static const unsigned char D10 = PIN_D10;

boards/variants/wb2l-m1.c

@@ -0,0 +1,54 @@
+/* This file was auto-generated from wb2l-m1.json using boardgen */
+
+#include <Arduino.h>
+
+#ifdef LT_VARIANT_INCLUDE
+#include LT_VARIANT_INCLUDE
+#endif
+
+// clang-format off
+PinInfo lt_arduino_pin_info_list[PINS_COUNT] = {
+	// D0: P8, PWM2
+	{GPIO8,  PIN_GPIO | PIN_IRQ | PIN_PWM,                      PIN_NONE, 0},
+	// D1: P7, PWM1
+	{GPIO7,  PIN_GPIO | PIN_IRQ | PIN_PWM,                      PIN_NONE, 0},
+	// D2: P6, PWM0
+	{GPIO6,  PIN_GPIO | PIN_IRQ | PIN_PWM,                      PIN_NONE, 0},
+	// D3: P26, PWM5, IRDA
+	{GPIO26, PIN_GPIO | PIN_IRQ | PIN_PWM,                      PIN_NONE, 0},
+	// D4: P24, PWM4
+	{GPIO24, PIN_GPIO | PIN_IRQ | PIN_PWM,                      PIN_NONE, 0},
+	// D5: P10, UART1_RX
+	{GPIO10, PIN_GPIO | PIN_IRQ | PIN_UART,                     PIN_NONE, 0},
+	// D6: P11, UART1_TX
+	{GPIO11, PIN_GPIO | PIN_IRQ | PIN_UART,                     PIN_NONE, 0},
+	// D7: P1, UART2_RX, I2C2_SDA
+	{GPIO1,  PIN_GPIO | PIN_IRQ | PIN_I2C | PIN_UART,           PIN_NONE, 0},
+	// D8: P0, UART2_TX, I2C2_SCL
+	{GPIO0,  PIN_GPIO | PIN_IRQ | PIN_I2C | PIN_UART,           PIN_NONE, 0},
+	// D9: P20, I2C1_SCL, TCK, FSCK
+	{GPIO20, PIN_GPIO | PIN_IRQ | PIN_I2C | PIN_JTAG,           PIN_NONE, 0},
+	// D10: P21, I2C1_SDA, TMS, MCLK, ^FCS
+	{GPIO21, PIN_GPIO | PIN_IRQ | PIN_I2C | PIN_I2S | PIN_JTAG, PIN_NONE, 0},
+	// D11: P23, ADC3, TDO, FSO
+	{GPIO23, PIN_GPIO | PIN_IRQ | PIN_ADC | PIN_JTAG,           PIN_NONE, 0},
+	// D12: P22, TDI, FSI
+	{GPIO22, PIN_GPIO | PIN_IRQ | PIN_JTAG,                     PIN_NONE, 0},
+};
+
+PinInfo *lt_arduino_pin_gpio_map[] = {
+	[0]  = &(lt_arduino_pin_info_list[8]),  // GPIO0 (D8)
+	[1]  = &(lt_arduino_pin_info_list[7]),  // GPIO1 (D7)
+	[6]  = &(lt_arduino_pin_info_list[2]),  // GPIO6 (D2)
+	[7]  = &(lt_arduino_pin_info_list[1]),  // GPIO7 (D1)
+	[8]  = &(lt_arduino_pin_info_list[0]),  // GPIO8 (D0)
+	[10] = &(lt_arduino_pin_info_list[5]),  // GPIO10 (D5)
+	[11] = &(lt_arduino_pin_info_list[6]),  // GPIO11 (D6)
+	[20] = &(lt_arduino_pin_info_list[9]),  // GPIO20 (D9)
+	[21] = &(lt_arduino_pin_info_list[10]), // GPIO21 (D10)
+	[22] = &(lt_arduino_pin_info_list[12]), // GPIO22 (D12)
+	[23] = &(lt_arduino_pin_info_list[11]), // GPIO23 (D11)
+	[24] = &(lt_arduino_pin_info_list[4]),  // GPIO24 (D4)
+	[26] = &(lt_arduino_pin_info_list[3]),  // GPIO26 (D3)
+};
+// clang-format on

boards/variants/wb2l-m1.h

@@ -0,0 +1,100 @@
+/* This file was auto-generated from wb2l-m1.json using boardgen */
+
+#pragma once
+
+// clang-format off
+
+// Pins
+// ----
+#define PINS_COUNT         13 // Total GPIO count
+#define NUM_DIGITAL_PINS   13 // Digital inputs/outputs
+#define NUM_ANALOG_INPUTS  1  // ADC inputs
+#define NUM_ANALOG_OUTPUTS 5  // PWM & DAC outputs
+#define PINS_GPIO_MAX      26 // Last usable GPIO number
+
+// Wire Interfaces
+// ---------------
+#define PIN_WIRE1_SCL 20u // GPIO20
+#define PIN_WIRE1_SDA 21u // GPIO21
+#define PIN_WIRE2_SCL 0u  // GPIO0
+#define PIN_WIRE2_SDA 1u  // GPIO1
+
+// Serial ports
+// ------------
+#define PIN_SERIAL1_RX 10u // GPIO10
+#define PIN_SERIAL1_TX 11u // GPIO11
+#define PIN_SERIAL2_RX 1u  // GPIO1
+#define PIN_SERIAL2_TX 0u  // GPIO0
+
+// Pin function macros
+// -------------------
+#define PIN_ADC3 23u // GPIO23
+#define PIN_P0   0u  // GPIO0
+#define PIN_P1   1u  // GPIO1
+#define PIN_P6   6u  // GPIO6
+#define PIN_P7   7u  // GPIO7
+#define PIN_P8   8u  // GPIO8
+#define PIN_P10  10u // GPIO10
+#define PIN_P11  11u // GPIO11
+#define PIN_P20  20u // GPIO20
+#define PIN_P21  21u // GPIO21
+#define PIN_P22  22u // GPIO22
+#define PIN_P23  23u // GPIO23
+#define PIN_P24  24u // GPIO24
+#define PIN_P26  26u // GPIO26
+#define PIN_PWM0 6u  // GPIO6
+#define PIN_PWM1 7u  // GPIO7
+#define PIN_PWM2 8u  // GPIO8
+#define PIN_PWM4 24u // GPIO24
+#define PIN_PWM5 26u // GPIO26
+#define PIN_RX1  10u // GPIO10
+#define PIN_RX2  1u  // GPIO1
+#define PIN_SCL1 20u // GPIO20
+#define PIN_SCL2 0u  // GPIO0
+#define PIN_SDA1 21u // GPIO21
+#define PIN_SDA2 1u  // GPIO1
+#define PIN_TX1  11u // GPIO11
+#define PIN_TX2  0u  // GPIO0
+
+// Port availability
+// -----------------
+#define HAS_SERIAL1             1
+#define HAS_SERIAL2             1
+#define HAS_WIRE1               1
+#define HAS_WIRE2               1
+#define SERIAL_INTERFACES_COUNT 2
+#define WIRE_INTERFACES_COUNT   2
+
+// Arduino pin names
+// -----------------
+#define PIN_D0  8u  // GPIO8
+#define PIN_D1  7u  // GPIO7
+#define PIN_D2  6u  // GPIO6
+#define PIN_D3  26u // GPIO26
+#define PIN_D4  24u // GPIO24
+#define PIN_D5  10u // GPIO10
+#define PIN_D6  11u // GPIO11
+#define PIN_D7  1u  // GPIO1
+#define PIN_D8  0u  // GPIO0
+#define PIN_D9  20u // GPIO20
+#define PIN_D10 21u // GPIO21
+#define PIN_D11 23u // GPIO23
+#define PIN_D12 22u // GPIO22
+#define PIN_A0  23u // GPIO23
+
+// Static pin names
+// ----------------
+static const unsigned char A0 = PIN_A0;
+static const unsigned char D0 = PIN_D0;
+static const unsigned char D1 = PIN_D1;
+static const unsigned char D2 = PIN_D2;
+static const unsigned char D3 = PIN_D3;
+static const unsigned char D4 = PIN_D4;
+static const unsigned char D5 = PIN_D5;
+static const unsigned char D6 = PIN_D6;
+static const unsigned char D7 = PIN_D7;
+static const unsigned char D8 = PIN_D8;
+static const unsigned char D9 = PIN_D9;
+static const unsigned char D10 = PIN_D10;
+static const unsigned char D11 = PIN_D11;
+static const unsigned char D12 = PIN_D12;

boards/variants/wblc5.c

@@ -0,0 +1,48 @@
+/* This file was auto-generated from wblc5.json using boardgen */
+
+#include <Arduino.h>
+
+#ifdef LT_VARIANT_INCLUDE
+#include LT_VARIANT_INCLUDE
+#endif
+
+// clang-format off
+PinInfo lt_arduino_pin_info_list[PINS_COUNT] = {
+	// D0: P24, PWM4
+	{GPIO24, PIN_GPIO | PIN_IRQ | PIN_PWM,                      PIN_NONE, 0},
+	// D1: P6, PWM0
+	{GPIO6,  PIN_GPIO | PIN_IRQ | PIN_PWM,                      PIN_NONE, 0},
+	// D2: P26, PWM5, IRDA
+	{GPIO26, PIN_GPIO | PIN_IRQ | PIN_PWM,                      PIN_NONE, 0},
+	// D3: P10, UART1_RX
+	{GPIO10, PIN_GPIO | PIN_IRQ | PIN_UART,                     PIN_NONE, 0},
+	// D4: P11, UART1_TX
+	{GPIO11, PIN_GPIO | PIN_IRQ | PIN_UART,                     PIN_NONE, 0},
+	// D5: P1, UART2_RX, I2C2_SDA
+	{GPIO1,  PIN_GPIO | PIN_IRQ | PIN_I2C | PIN_UART,           PIN_NONE, 0},
+	// D6: P0, UART2_TX, I2C2_SCL
+	{GPIO0,  PIN_GPIO | PIN_IRQ | PIN_I2C | PIN_UART,           PIN_NONE, 0},
+	// D7: P20, I2C1_SCL, TCK, FSCK
+	{GPIO20, PIN_GPIO | PIN_IRQ | PIN_I2C | PIN_JTAG,           PIN_NONE, 0},
+	// D8: P21, I2C1_SDA, TMS, MCLK, ^FCS
+	{GPIO21, PIN_GPIO | PIN_IRQ | PIN_I2C | PIN_I2S | PIN_JTAG, PIN_NONE, 0},
+	// D9: P22, TDI, FSI
+	{GPIO22, PIN_GPIO | PIN_IRQ | PIN_JTAG,                     PIN_NONE, 0},
+	// D10: P23, ADC3, TDO, FSO
+	{GPIO23, PIN_GPIO | PIN_IRQ | PIN_ADC | PIN_JTAG,           PIN_NONE, 0},
+};
+
+PinInfo *lt_arduino_pin_gpio_map[] = {
+	[0]  = &(lt_arduino_pin_info_list[6]),  // GPIO0 (D6)
+	[1]  = &(lt_arduino_pin_info_list[5]),  // GPIO1 (D5)
+	[6]  = &(lt_arduino_pin_info_list[1]),  // GPIO6 (D1)
+	[10] = &(lt_arduino_pin_info_list[3]),  // GPIO10 (D3)
+	[11] = &(lt_arduino_pin_info_list[4]),  // GPIO11 (D4)
+	[20] = &(lt_arduino_pin_info_list[7]),  // GPIO20 (D7)
+	[21] = &(lt_arduino_pin_info_list[8]),  // GPIO21 (D8)
+	[22] = &(lt_arduino_pin_info_list[9]),  // GPIO22 (D9)
+	[23] = &(lt_arduino_pin_info_list[10]), // GPIO23 (D10)
+	[24] = &(lt_arduino_pin_info_list[0]),  // GPIO24 (D0)
+	[26] = &(lt_arduino_pin_info_list[2]),  // GPIO26 (D2)
+};
+// clang-format on

boards/variants/wblc5.h

@@ -0,0 +1,92 @@
+/* This file was auto-generated from wblc5.json using boardgen */
+
+#pragma once
+
+// clang-format off
+
+// Pins
+// ----
+#define PINS_COUNT         11 // Total GPIO count
+#define NUM_DIGITAL_PINS   11 // Digital inputs/outputs
+#define NUM_ANALOG_INPUTS  1  // ADC inputs
+#define NUM_ANALOG_OUTPUTS 3  // PWM & DAC outputs
+#define PINS_GPIO_MAX      26 // Last usable GPIO number
+
+// Wire Interfaces
+// ---------------
+#define PIN_WIRE1_SCL 20u // GPIO20
+#define PIN_WIRE1_SDA 21u // GPIO21
+#define PIN_WIRE2_SCL 0u  // GPIO0
+#define PIN_WIRE2_SDA 1u  // GPIO1
+
+// Serial ports
+// ------------
+#define PIN_SERIAL1_RX 10u // GPIO10
+#define PIN_SERIAL1_TX 11u // GPIO11
+#define PIN_SERIAL2_RX 1u  // GPIO1
+#define PIN_SERIAL2_TX 0u  // GPIO0
+
+// Pin function macros
+// -------------------
+#define PIN_ADC3 23u // GPIO23
+#define PIN_P0   0u  // GPIO0
+#define PIN_P1   1u  // GPIO1
+#define PIN_P6   6u  // GPIO6
+#define PIN_P10  10u // GPIO10
+#define PIN_P11  11u // GPIO11
+#define PIN_P20  20u // GPIO20
+#define PIN_P21  21u // GPIO21
+#define PIN_P22  22u // GPIO22
+#define PIN_P23  23u // GPIO23
+#define PIN_P24  24u // GPIO24
+#define PIN_P26  26u // GPIO26
+#define PIN_PWM0 6u  // GPIO6
+#define PIN_PWM4 24u // GPIO24
+#define PIN_PWM5 26u // GPIO26
+#define PIN_RX1  10u // GPIO10
+#define PIN_RX2  1u  // GPIO1
+#define PIN_SCL1 20u // GPIO20
+#define PIN_SCL2 0u  // GPIO0
+#define PIN_SDA1 21u // GPIO21
+#define PIN_SDA2 1u  // GPIO1
+#define PIN_TX1  11u // GPIO11
+#define PIN_TX2  0u  // GPIO0
+
+// Port availability
+// -----------------
+#define HAS_SERIAL1             1
+#define HAS_SERIAL2             1
+#define HAS_WIRE1               1
+#define HAS_WIRE2               1
+#define SERIAL_INTERFACES_COUNT 2
+#define WIRE_INTERFACES_COUNT   2
+
+// Arduino pin names
+// -----------------
+#define PIN_D0  24u // GPIO24
+#define PIN_D1  6u  // GPIO6
+#define PIN_D2  26u // GPIO26
+#define PIN_D3  10u // GPIO10
+#define PIN_D4  11u // GPIO11
+#define PIN_D5  1u  // GPIO1
+#define PIN_D6  0u  // GPIO0
+#define PIN_D7  20u // GPIO20
+#define PIN_D8  21u // GPIO21
+#define PIN_D9  22u // GPIO22
+#define PIN_D10 23u // GPIO23
+#define PIN_A0  23u // GPIO23
+
+// Static pin names
+// ----------------
+static const unsigned char A0 = PIN_A0;
+static const unsigned char D0 = PIN_D0;
+static const unsigned char D1 = PIN_D1;
+static const unsigned char D2 = PIN_D2;
+static const unsigned char D3 = PIN_D3;
+static const unsigned char D4 = PIN_D4;
+static const unsigned char D5 = PIN_D5;
+static const unsigned char D6 = PIN_D6;
+static const unsigned char D7 = PIN_D7;
+static const unsigned char D8 = PIN_D8;
+static const unsigned char D9 = PIN_D9;
+static const unsigned char D10 = PIN_D10;

boards/variants/wr1.c

@@ -0,0 +1,48 @@
+/* This file was auto-generated from wr1.json using boardgen */
+
+#include <Arduino.h>
+
+#ifdef LT_VARIANT_INCLUDE
+#include LT_VARIANT_INCLUDE
+#endif
+
+// clang-format off
+PinInfo lt_arduino_pin_info_list[PINS_COUNT] = {
+	// D0: PA23, UART0_TX, SPI0_MOSI, SPI1_MOSI, I2C1_SDA, SD_D1, PWM0, WAKE3
+	{PA_23, PIN_GPIO | PIN_IRQ | PIN_PWM | PIN_I2C | PIN_SPI | PIN_UART,           PIN_NONE, 0},
+	// D1: PA18, UART0_RX, SPI0_SCK, SPI1_SCK, I2C1_SCL, SD_D2, TMR4_TRIG, I2S0_MCK, WAKE0
+	{PA_18, PIN_GPIO | PIN_IRQ | PIN_I2C | PIN_I2S | PIN_SPI | PIN_UART,           PIN_NONE, 0},
+	// D2: PA14, PWM0, SWCLK
+	{PA_14, PIN_GPIO | PIN_IRQ | PIN_PWM | PIN_SWD,                                PIN_NONE, 0},
+	// D3: PA15, PWM1, SWDIO
+	{PA_15, PIN_GPIO | PIN_IRQ | PIN_PWM | PIN_SWD,                                PIN_NONE, 0},
+	// D4: PA30, UART2_TX, I2C0_SDA, PWM4
+	{PA_30, PIN_GPIO | PIN_IRQ | PIN_PWM | PIN_I2C | PIN_UART,                     PIN_NONE, 0},
+	// D5: PA00, PWM2
+	{PA_0,  PIN_GPIO | PIN_IRQ | PIN_PWM,                                          PIN_NONE, 0},
+	// D6: PA05, PWM4, WAKE1
+	{PA_5,  PIN_GPIO | PIN_IRQ | PIN_PWM,                                          PIN_NONE, 0},
+	// D7: PA29, UART2_RX, I2C0_SCL, PWM4
+	{PA_29, PIN_GPIO | PIN_IRQ | PIN_PWM | PIN_I2C | PIN_UART,                     PIN_NONE, 0},
+	// D8: PA19, ADC1, UART0_CTS, SPI0_CS, SPI1_CS, I2C0_SDA, SD_D3, TMR5_TRIG, I2S0_TX
+	{PA_19, PIN_GPIO | PIN_IRQ | PIN_ADC | PIN_I2C | PIN_I2S | PIN_SPI | PIN_UART, PIN_NONE, 0},
+	// D9: PA22, UART0_RTS, SPI0_MISO, SPI1_MISO, I2C0_SCL, SD_D0, PWM5, I2S0_WS, WAKE2
+	{PA_22, PIN_GPIO | PIN_IRQ | PIN_PWM | PIN_I2C | PIN_I2S | PIN_SPI | PIN_UART, PIN_NONE, 0},
+	// A1: ADC2
+	{AD_2,  PIN_ADC,                                                               PIN_NONE, 0},
+};
+
+PinInfo *lt_arduino_pin_gpio_map[] = {
+	[0]  = &(lt_arduino_pin_info_list[5]),  // PA_0 (D5)
+	[5]  = &(lt_arduino_pin_info_list[6]),  // PA_5 (D6)
+	[14] = &(lt_arduino_pin_info_list[2]),  // PA_14 (D2)
+	[15] = &(lt_arduino_pin_info_list[3]),  // PA_15 (D3)
+	[18] = &(lt_arduino_pin_info_list[1]),  // PA_18 (D1)
+	[19] = &(lt_arduino_pin_info_list[8]),  // PA_19 (D8)
+	[22] = &(lt_arduino_pin_info_list[9]),  // PA_22 (D9)
+	[23] = &(lt_arduino_pin_info_list[0]),  // PA_23 (D0)
+	[29] = &(lt_arduino_pin_info_list[7]),  // PA_29 (D7)
+	[30] = &(lt_arduino_pin_info_list[4]),  // PA_30 (D4)
+	[41] = &(lt_arduino_pin_info_list[10]), // AD_2 (A1)
+};
+// clang-format on

boards/variants/wr1.h

@@ -0,0 +1,122 @@
+/* This file was auto-generated from wr1.json using boardgen */
+
+#pragma once
+
+// clang-format off
+
+// Pins
+// ----
+#define PINS_COUNT         11 // Total GPIO count
+#define NUM_DIGITAL_PINS   10 // Digital inputs/outputs
+#define NUM_ANALOG_INPUTS  2  // ADC inputs
+#define NUM_ANALOG_OUTPUTS 8  // PWM & DAC outputs
+#define PINS_GPIO_MAX      41 // Last usable GPIO number
+
+// SPI Interfaces
+// --------------
+#define PIN_SPI0_CS   19u // PA_19
+#define PIN_SPI0_MISO 22u // PA_22
+#define PIN_SPI0_MOSI 23u // PA_23
+#define PIN_SPI0_SCK  18u // PA_18
+#define PIN_SPI1_CS   19u // PA_19
+#define PIN_SPI1_MISO 22u // PA_22
+#define PIN_SPI1_MOSI 23u // PA_23
+#define PIN_SPI1_SCK  18u // PA_18
+
+// Wire Interfaces
+// ---------------
+#define PIN_WIRE0_SCL_0 29u // PA_29
+#define PIN_WIRE0_SCL_1 22u // PA_22
+#define PIN_WIRE0_SDA_0 30u // PA_30
+#define PIN_WIRE0_SDA_1 19u // PA_19
+#define PIN_WIRE1_SCL   18u // PA_18
+#define PIN_WIRE1_SDA   23u // PA_23
+
+// Serial ports
+// ------------
+#define PIN_SERIAL0_CTS 19u // PA_19
+#define PIN_SERIAL0_RTS 22u // PA_22
+#define PIN_SERIAL0_RX  18u // PA_18
+#define PIN_SERIAL0_TX  23u // PA_23
+#define PIN_SERIAL2_RX  29u // PA_29
+#define PIN_SERIAL2_TX  30u // PA_30
+
+// Pin function macros
+// -------------------
+#define PIN_ADC1  19u // PA_19
+#define PIN_ADC2  41u // AD_2
+#define PIN_CS0   19u // PA_19
+#define PIN_CS1   19u // PA_19
+#define PIN_CTS0  19u // PA_19
+#define PIN_MISO0 22u // PA_22
+#define PIN_MISO1 22u // PA_22
+#define PIN_MOSI0 23u // PA_23
+#define PIN_MOSI1 23u // PA_23
+#define PIN_PA00  0u  // PA_0
+#define PIN_PA05  5u  // PA_5
+#define PIN_PA14  14u // PA_14
+#define PIN_PA15  15u // PA_15
+#define PIN_PA18  18u // PA_18
+#define PIN_PA19  19u // PA_19
+#define PIN_PA22  22u // PA_22
+#define PIN_PA23  23u // PA_23
+#define PIN_PA29  29u // PA_29
+#define PIN_PA30  30u // PA_30
+#define PIN_PWM0  14u // PA_14
+#define PIN_PWM1  15u // PA_15
+#define PIN_PWM2  0u  // PA_0
+#define PIN_PWM4  29u // PA_29
+#define PIN_PWM5  22u // PA_22
+#define PIN_RTS0  22u // PA_22
+#define PIN_RX0   18u // PA_18
+#define PIN_RX2   29u // PA_29
+#define PIN_SCK0  18u // PA_18
+#define PIN_SCK1  18u // PA_18
+#define PIN_SCL0  22u // PA_22
+#define PIN_SCL1  18u // PA_18
+#define PIN_SDA0  19u // PA_19
+#define PIN_SDA1  23u // PA_23
+#define PIN_TX0   23u // PA_23
+#define PIN_TX2   30u // PA_30
+
+// Port availability
+// -----------------
+#define HAS_SERIAL0             1
+#define HAS_SERIAL2             1
+#define HAS_SPI0                1
+#define HAS_SPI1                1
+#define HAS_WIRE0               1
+#define HAS_WIRE1               1
+#define SERIAL_INTERFACES_COUNT 2
+#define SPI_INTERFACES_COUNT    2
+#define WIRE_INTERFACES_COUNT   2
+
+// Arduino pin names
+// -----------------
+#define PIN_D0 23u // PA_23
+#define PIN_D1 18u // PA_18
+#define PIN_D2 14u // PA_14
+#define PIN_D3 15u // PA_15
+#define PIN_D4 30u // PA_30
+#define PIN_D5 0u  // PA_0
+#define PIN_D6 5u  // PA_5
+#define PIN_D7 29u // PA_29
+#define PIN_D8 19u // PA_19
+#define PIN_D9 22u // PA_22
+#define PIN_A0 19u // PA_19
+#define PIN_A1 41u // AD_2
+
+// Static pin names
+// ----------------
+static const unsigned char A0 = PIN_A0;
+static const unsigned char A1 = PIN_A1;
+static const unsigned char D0 = PIN_D0;
+static const unsigned char D1 = PIN_D1;
+static const unsigned char D2 = PIN_D2;
+static const unsigned char D3 = PIN_D3;
+static const unsigned char D4 = PIN_D4;
+static const unsigned char D5 = PIN_D5;
+static const unsigned char D6 = PIN_D6;
+static const unsigned char D7 = PIN_D7;
+static const unsigned char D8 = PIN_D8;
+static const unsigned char D9 = PIN_D9;

boards/variants/wr1e.c

@@ -0,0 +1,48 @@
+/* This file was auto-generated from wr1e.json using boardgen */
+
+#include <Arduino.h>
+
+#ifdef LT_VARIANT_INCLUDE
+#include LT_VARIANT_INCLUDE
+#endif
+
+// clang-format off
+PinInfo lt_arduino_pin_info_list[PINS_COUNT] = {
+	// D0: PA23, UART0_TX, SPI0_MOSI, SPI1_MOSI, I2C1_SDA, SD_D1, PWM0, WAKE3
+	{PA_23, PIN_GPIO | PIN_IRQ | PIN_PWM | PIN_I2C | PIN_SPI | PIN_UART,           PIN_NONE, 0},
+	// D1: PA18, UART0_RX, SPI0_SCK, SPI1_SCK, I2C1_SCL, SD_D2, TMR4_TRIG, I2S0_MCK, WAKE0
+	{PA_18, PIN_GPIO | PIN_IRQ | PIN_I2C | PIN_I2S | PIN_SPI | PIN_UART,           PIN_NONE, 0},
+	// D2: PA14, PWM0, SWCLK
+	{PA_14, PIN_GPIO | PIN_IRQ | PIN_PWM | PIN_SWD,                                PIN_NONE, 0},
+	// D3: PA15, PWM1, SWDIO
+	{PA_15, PIN_GPIO | PIN_IRQ | PIN_PWM | PIN_SWD,                                PIN_NONE, 0},
+	// D4: PA30, UART2_TX, I2C0_SDA, PWM4
+	{PA_30, PIN_GPIO | PIN_IRQ | PIN_PWM | PIN_I2C | PIN_UART,                     PIN_NONE, 0},
+	// D5: PA12, PWM3
+	{PA_12, PIN_GPIO | PIN_IRQ | PIN_PWM,                                          PIN_NONE, 0},
+	// D6: PA05, PWM4, WAKE1
+	{PA_5,  PIN_GPIO | PIN_IRQ | PIN_PWM,                                          PIN_NONE, 0},
+	// D7: PA29, UART2_RX, I2C0_SCL, PWM4
+	{PA_29, PIN_GPIO | PIN_IRQ | PIN_PWM | PIN_I2C | PIN_UART,                     PIN_NONE, 0},
+	// D8: PA19, ADC1, UART0_CTS, SPI0_CS, SPI1_CS, I2C0_SDA, SD_D3, TMR5_TRIG, I2S0_TX
+	{PA_19, PIN_GPIO | PIN_IRQ | PIN_ADC | PIN_I2C | PIN_I2S | PIN_SPI | PIN_UART, PIN_NONE, 0},
+	// D9: PA22, UART0_RTS, SPI0_MISO, SPI1_MISO, I2C0_SCL, SD_D0, PWM5, I2S0_WS, WAKE2
+	{PA_22, PIN_GPIO | PIN_IRQ | PIN_PWM | PIN_I2C | PIN_I2S | PIN_SPI | PIN_UART, PIN_NONE, 0},
+	// A1: ADC2
+	{AD_2,  PIN_ADC,                                                               PIN_NONE, 0},
+};
+
+PinInfo *lt_arduino_pin_gpio_map[] = {
+	[5]  = &(lt_arduino_pin_info_list[6]),  // PA_5 (D6)
+	[12] = &(lt_arduino_pin_info_list[5]),  // PA_12 (D5)
+	[14] = &(lt_arduino_pin_info_list[2]),  // PA_14 (D2)
+	[15] = &(lt_arduino_pin_info_list[3]),  // PA_15 (D3)
+	[18] = &(lt_arduino_pin_info_list[1]),  // PA_18 (D1)
+	[19] = &(lt_arduino_pin_info_list[8]),  // PA_19 (D8)
+	[22] = &(lt_arduino_pin_info_list[9]),  // PA_22 (D9)
+	[23] = &(lt_arduino_pin_info_list[0]),  // PA_23 (D0)
+	[29] = &(lt_arduino_pin_info_list[7]),  // PA_29 (D7)
+	[30] = &(lt_arduino_pin_info_list[4]),  // PA_30 (D4)
+	[41] = &(lt_arduino_pin_info_list[10]), // AD_2 (A1)
+};
+// clang-format on

boards/variants/wr1e.h

@@ -0,0 +1,122 @@
+/* This file was auto-generated from wr1e.json using boardgen */
+
+#pragma once
+
+// clang-format off
+
+// Pins
+// ----
+#define PINS_COUNT         11 // Total GPIO count
+#define NUM_DIGITAL_PINS   10 // Digital inputs/outputs
+#define NUM_ANALOG_INPUTS  2  // ADC inputs
+#define NUM_ANALOG_OUTPUTS 8  // PWM & DAC outputs
+#define PINS_GPIO_MAX      41 // Last usable GPIO number
+
+// SPI Interfaces
+// --------------
+#define PIN_SPI0_CS   19u // PA_19
+#define PIN_SPI0_MISO 22u // PA_22
+#define PIN_SPI0_MOSI 23u // PA_23
+#define PIN_SPI0_SCK  18u // PA_18
+#define PIN_SPI1_CS   19u // PA_19
+#define PIN_SPI1_MISO 22u // PA_22
+#define PIN_SPI1_MOSI 23u // PA_23
+#define PIN_SPI1_SCK  18u // PA_18
+
+// Wire Interfaces
+// ---------------
+#define PIN_WIRE0_SCL_0 29u // PA_29
+#define PIN_WIRE0_SCL_1 22u // PA_22
+#define PIN_WIRE0_SDA_0 30u // PA_30
+#define PIN_WIRE0_SDA_1 19u // PA_19
+#define PIN_WIRE1_SCL   18u // PA_18
+#define PIN_WIRE1_SDA   23u // PA_23
+
+// Serial ports
+// ------------
+#define PIN_SERIAL0_CTS 19u // PA_19
+#define PIN_SERIAL0_RTS 22u // PA_22
+#define PIN_SERIAL0_RX  18u // PA_18
+#define PIN_SERIAL0_TX  23u // PA_23
+#define PIN_SERIAL2_RX  29u // PA_29
+#define PIN_SERIAL2_TX  30u // PA_30
+
+// Pin function macros
+// -------------------
+#define PIN_ADC1  19u // PA_19
+#define PIN_ADC2  41u // AD_2
+#define PIN_CS0   19u // PA_19
+#define PIN_CS1   19u // PA_19
+#define PIN_CTS0  19u // PA_19
+#define PIN_MISO0 22u // PA_22
+#define PIN_MISO1 22u // PA_22
+#define PIN_MOSI0 23u // PA_23
+#define PIN_MOSI1 23u // PA_23
+#define PIN_PA05  5u  // PA_5
+#define PIN_PA12  12u // PA_12
+#define PIN_PA14  14u // PA_14
+#define PIN_PA15  15u // PA_15
+#define PIN_PA18  18u // PA_18
+#define PIN_PA19  19u // PA_19
+#define PIN_PA22  22u // PA_22
+#define PIN_PA23  23u // PA_23
+#define PIN_PA29  29u // PA_29
+#define PIN_PA30  30u // PA_30
+#define PIN_PWM0  14u // PA_14
+#define PIN_PWM1  15u // PA_15
+#define PIN_PWM3  12u // PA_12
+#define PIN_PWM4  29u // PA_29
+#define PIN_PWM5  22u // PA_22
+#define PIN_RTS0  22u // PA_22
+#define PIN_RX0   18u // PA_18
+#define PIN_RX2   29u // PA_29
+#define PIN_SCK0  18u // PA_18
+#define PIN_SCK1  18u // PA_18
+#define PIN_SCL0  22u // PA_22
+#define PIN_SCL1  18u // PA_18
+#define PIN_SDA0  19u // PA_19
+#define PIN_SDA1  23u // PA_23
+#define PIN_TX0   23u // PA_23
+#define PIN_TX2   30u // PA_30
+
+// Port availability
+// -----------------
+#define HAS_SERIAL0             1
+#define HAS_SERIAL2             1
+#define HAS_SPI0                1
+#define HAS_SPI1                1
+#define HAS_WIRE0               1
+#define HAS_WIRE1               1
+#define SERIAL_INTERFACES_COUNT 2
+#define SPI_INTERFACES_COUNT    2
+#define WIRE_INTERFACES_COUNT   2
+
+// Arduino pin names
+// -----------------
+#define PIN_D0 23u // PA_23
+#define PIN_D1 18u // PA_18
+#define PIN_D2 14u // PA_14
+#define PIN_D3 15u // PA_15
+#define PIN_D4 30u // PA_30
+#define PIN_D5 12u // PA_12
+#define PIN_D6 5u  // PA_5
+#define PIN_D7 29u // PA_29
+#define PIN_D8 19u // PA_19
+#define PIN_D9 22u // PA_22
+#define PIN_A0 19u // PA_19
+#define PIN_A1 41u // AD_2
+
+// Static pin names
+// ----------------
+static const unsigned char A0 = PIN_A0;
+static const unsigned char A1 = PIN_A1;
+static const unsigned char D0 = PIN_D0;
+static const unsigned char D1 = PIN_D1;
+static const unsigned char D2 = PIN_D2;
+static const unsigned char D3 = PIN_D3;
+static const unsigned char D4 = PIN_D4;
+static const unsigned char D5 = PIN_D5;
+static const unsigned char D6 = PIN_D6;
+static const unsigned char D7 = PIN_D7;
+static const unsigned char D8 = PIN_D8;
+static const unsigned char D9 = PIN_D9;

boards/wa2.json

@@ -0,0 +1,20 @@
+{
+	"_base": [
+		"beken-72xx",
+		"beken-7231",
+		"beken-7231q",
+		"ic/bk7231q-qfn40",
+		"pcb/wa2",
+		"pcb/wa2-test"
+	],
+	"build": {
+		"mcu": "bk7231q",
+		"variant": "wa2"
+	},
+	"name": "WA2 Wi-Fi Module",
+	"url": "https://docs.libretiny.eu/boards/wa2/",
+	"vendor": "Tuya Inc.",
+	"pcb": {
+		"symbol": "WA2"
+	}
+}

boards/wb1s.json

@@ -0,0 +1,23 @@
+{
+	"_base": [
+		"beken-72xx",
+		"beken-7231",
+		"beken-7231t",
+		"beken-7231-tuya",
+		"ic/bk7231-qfn32",
+		"pcb/wb1s"
+	],
+	"build": {
+		"mcu": "bk7231t",
+		"variant": "wb1s"
+	},
+	"name": "WB1S Wi-Fi Module",
+	"url": "https://developer.tuya.com/en/docs/iot/wb1s?id=K9duevbj3ol4x",
+	"vendor": "Tuya Inc.",
+	"doc": {
+		"fccid": "2ANDL-WB1S"
+	},
+	"pcb": {
+		"symbol": "WB1S"
+	}
+}

boards/wb2l-m1.json

@@ -0,0 +1,21 @@
+{
+	"_base": [
+		"beken-72xx",
+		"beken-7231n",
+		"beken-7231-tuya",
+		"ic/bk7231-qfn32",
+		"pcb/wb2l",
+		"pcb/wb2l-test",
+		"pcb/wb2l-m1-test"
+	],
+	"build": {
+		"mcu": "bk7231n",
+		"variant": "wb2l-m1"
+	},
+	"name": "WB2L_M1 Wi-Fi Module",
+	"url": "https://docs.libretiny.eu/boards/wb2l-m1/",
+	"vendor": "Tuya Inc.",
+	"pcb": {
+		"symbol": "WB2L_M1"
+	}
+}

boards/wb2l.json

@@ -1,8 +1,9 @@
 {
 	"_base": [
 		"beken-72xx",
-		"beken-7231u",
-		"beken-7231t-tuya",
+		"beken-7231",
+		"beken-7231t",
+		"beken-7231-tuya",
 		"ic/bk7231-qfn32",
 		"pcb/wb2l",
 		"pcb/wb2l-test"

boards/wb2s.json

@@ -1,8 +1,9 @@
 {
 	"_base": [
 		"beken-72xx",
-		"beken-7231u",
-		"beken-7231t-tuya",
+		"beken-7231",
+		"beken-7231t",
+		"beken-7231-tuya",
 		"ic/bk7231-qfn32",
 		"pcb/wb2s",
 		"pcb/wb2s-test"