[beken-72xx] Implement Serial classes

README.md

@@ -45,8 +45,9 @@ Note: this list will probably change with each functionality update.
 --------------------|----------------|-------------
 Core functions      | ✔️             | ✔️
 GPIO/PWM/IRQ        | ✔️/✔️/✔️       | ❓/✔️/❌
-Analog input        | ✔️             | ✔️
-UART I/O            | ✔️             | ❌
+Analog input (ADC)  | ✔️             | ✔️
+Serial              | ✔️             | ✔️
+Serial (extra)      | ❌              | 1, 2
 Flash I/O           | ✔️             | ✔️
 **CORE LIBRARIES**  |                |
 SoftwareSerial      | ❌              | ❌

arduino/beken-72xx/cores/arduino/Arduino.h

@@ -13,3 +13,20 @@
 #include "WVariant.h"
 // Include board variant
 #include "variant.h"
+
+#ifdef __cplusplus
+#include "SerialClass.h"
+#ifdef HAS_SERIAL_CLASS
+// declare instances of available Serial* components
+// map Serial to Serial2 if available, else to Serial1
+#ifdef PIN_SERIAL1_RX
+extern SerialClass Serial1;
+#endif
+#ifdef PIN_SERIAL2_RX
+extern SerialClass Serial2;
+#define Serial Serial2
+#else
+#define Serial Serial1
+#endif
+#endif
+#endif

arduino/beken-72xx/cores/arduino/SerialClass.cpp

@@ -0,0 +1,75 @@
+/* Copyright (c) Kuba Szczodrzyński 2022-06-23. */
+
+#include "SerialClass.h"
+
+extern "C" {
+#include <uart_pub.h>
+
+extern void bk_send_byte(uint8_t uport, uint8_t data);
+extern void uart_hw_set_change(uint8_t uport, bk_uart_config_t *uart_config);
+extern int uart_rx_callback_set(int uport, uart_callback callback, void *param);
+}
+
+#ifdef PIN_SERIAL1_RX
+SerialClass Serial1(UART1_PORT);
+#endif
+#ifdef PIN_SERIAL2_RX
+SerialClass Serial2(UART2_PORT);
+#endif
+
+SerialClass::SerialClass(uint8_t port) {
+	this->port = port;
+	this->buf  = NULL;
+}
+
+static void callback(int port, void *param) {
+	RingBuffer *buf = (RingBuffer *)param;
+	buf->store_char(uart_read_byte(port));
+}
+
+void SerialClass::begin(unsigned long baudrate, uint16_t config) {
+	uint8_t dataWidth = ((config & SERIAL_DATA_MASK) >> 8) - 1;				  // 0x100..0x400 -> 0..3
+	uint8_t parity	  = 3 - (config & SERIAL_PARITY_MASK);					  // 0x3..0x1 -> 0..2
+	uint8_t stopBits  = (config & SERIAL_STOP_BIT_MASK) == SERIAL_STOP_BIT_2; // 0x10..0x30 -> 0..1
+
+	bk_uart_config_t cfg = {
+		.baud_rate	  = baudrate,
+		.data_width	  = (uart_data_width_t)dataWidth,
+		.parity		  = (uart_parity_t)parity,
+		.stop_bits	  = (uart_stop_bits_t)stopBits,
+		.flow_control = FLOW_CTRL_DISABLED,
+	};
+	if (this->buf) {
+		this->buf->clear();
+	} else {
+		this->buf = new RingBuffer();
+	}
+	uart_hw_set_change(port, &cfg);
+	uart_rx_callback_set(port, callback, this->buf);
+}
+
+void SerialClass::end() {
+	uart_rx_callback_set(port, NULL, NULL);
+	delete this->buf;
+}
+
+int SerialClass::available() {
+	return buf->available();
+}
+
+int SerialClass::peek() {
+	return buf->peek();
+}
+
+int SerialClass::read() {
+	return buf->read_char();
+}
+
+void SerialClass::flush() {
+	uart_wait_tx_over();
+}
+
+size_t SerialClass::write(uint8_t c) {
+	bk_send_byte(port, c);
+	return 1;
+}

arduino/beken-72xx/cores/arduino/SerialClass.h

@@ -0,0 +1,38 @@
+/* Copyright (c) Kuba Szczodrzyński 2022-06-23. */
+
+#pragma once
+
+#include <Arduino.h>
+#include <api/HardwareSerial.h>
+#include <api/RingBuffer.h>
+
+using namespace arduino;
+
+class SerialClass : public HardwareSerial {
+  private:
+	uint8_t port;
+	RingBuffer *buf;
+
+  public:
+	SerialClass(uint8_t port);
+
+	inline void begin(unsigned long baudrate) {
+		begin(baudrate, SERIAL_8N1);
+	}
+
+	void begin(unsigned long baudrate, uint16_t config);
+	void end();
+	int available();
+	int peek();
+	int read();
+	void flush();
+	size_t write(uint8_t c);
+
+	operator bool() {
+		return !!buf;
+	}
+
+	using Print::write;
+};
+
+#define HAS_SERIAL_CLASS 1