[mipi_dsi] add guition JC4880P443 display (#12068)

esphome/components/mipi_dsi/models/guition.py

@@ -35,3 +35,70 @@ DriverChip(
         (0x10, 0x0C), (0x11, 0x0C), (0x12, 0x0C), (0x13, 0x0C), (0x30, 0x00),
     ],
 )
+
+
+# JC4880P443 Driver Configuration (ST7701)
+# Using parameters from esp_lcd_st7701.h and the working full init sequence
+# ----------------------------------------------------------------------------------------------------------------------
+# * Resolution: 480x800
+# * PCLK Frequency: 34 MHz
+# * DSI Lane Bit Rate: 500 Mbps (using 2-Lane DSI configuration)
+# * Horizontal Timing (hsync_pulse_width=12, hsync_back_porch=42, hsync_front_porch=42)
+# * Vertical Timing (vsync_pulse_width=2, vsync_back_porch=8, vsync_front_porch=166)
+# ----------------------------------------------------------------------------------------------------------------------
+DriverChip(
+    "JC4880P443",
+    width=480,
+    height=800,
+    hsync_back_porch=42,
+    hsync_pulse_width=12,
+    hsync_front_porch=42,
+    vsync_back_porch=8,
+    vsync_pulse_width=2,
+    vsync_front_porch=166,
+    pclk_frequency="34MHz",
+    lane_bit_rate="500Mbps",
+    swap_xy=cv.UNDEFINED,
+    color_order="RGB",
+    reset_pin=5,
+    initsequence=[
+        (0xFF, 0x77, 0x01, 0x00, 0x00, 0x13),
+        (0xEF, 0x08),
+        (0xFF, 0x77, 0x01, 0x00, 0x00, 0x10),
+        (0xC0, 0x63, 0x00),
+        (0xC1, 0x0D, 0x02),
+        (0xC2, 0x10, 0x08),
+        (0xCC, 0x10),
+        (0xB0, 0x80, 0x09, 0x53, 0x0C, 0xD0, 0x07, 0x0C, 0x09, 0x09, 0x28, 0x06, 0xD4, 0x13, 0x69, 0x2B, 0x71),
+        (0xB1, 0x80, 0x94, 0x5A, 0x10, 0xD3, 0x06, 0x0A, 0x08, 0x08, 0x25, 0x03, 0xD3, 0x12, 0x66, 0x6A, 0x0D),
+        (0xFF, 0x77, 0x01, 0x00, 0x00, 0x11),
+        (0xB0, 0x5D),
+        (0xB1, 0x58),
+        (0xB2, 0x87),
+        (0xB3, 0x80),
+        (0xB5, 0x4E),
+        (0xB7, 0x85),
+        (0xB8, 0x21),
+        (0xB9, 0x10, 0x1F),
+        (0xBB, 0x03),
+        (0xBC, 0x00),
+        (0xC1, 0x78),
+        (0xC2, 0x78),
+        (0xD0, 0x88),
+        (0xE0, 0x00, 0x3A, 0x02),
+        (0xE1, 0x04, 0xA0, 0x00, 0xA0, 0x05, 0xA0, 0x00, 0xA0, 0x00, 0x40, 0x40),
+        (0xE2, 0x30, 0x00, 0x40, 0x40, 0x32, 0xA0, 0x00, 0xA0, 0x00, 0xA0, 0x00, 0xA0, 0x00),
+        (0xE3, 0x00, 0x00, 0x33, 0x33),
+        (0xE4, 0x44, 0x44),
+        (0xE5, 0x09, 0x2E, 0xA0, 0xA0, 0x0B, 0x30, 0xA0, 0xA0, 0x05, 0x2A, 0xA0, 0xA0, 0x07, 0x2C, 0xA0, 0xA0),
+        (0xE6, 0x00, 0x00, 0x33, 0x33),
+        (0xE7, 0x44, 0x44),
+        (0xE8, 0x08, 0x2D, 0xA0, 0xA0, 0x0A, 0x2F, 0xA0, 0xA0, 0x04, 0x29, 0xA0, 0xA0, 0x06, 0x2B, 0xA0, 0xA0),
+        (0xEB, 0x00, 0x00, 0x4E, 0x4E, 0x00, 0x00, 0x00),
+        (0xEC, 0x08, 0x01),
+        (0xED, 0xB0, 0x2B, 0x98, 0xA4, 0x56, 0x7F, 0xFF, 0xFF, 0xFF, 0xFF, 0xF7, 0x65, 0x4A, 0x89, 0xB2, 0x0B),
+        (0xEF, 0x08, 0x08, 0x08, 0x45, 0x3F, 0x54),
+        (0xFF, 0x77, 0x01, 0x00, 0x00, 0x00),
+    ]
+)
+# fmt: on