57 lines
1.4 KiB
Markdown
57 lines
1.4 KiB
Markdown
# ESPHome AXP2101 Component
|
|
|
|
This custom component implements AXP2101 support for the M5Stack Core2 V1.1, building on top of https://github.com/martydingo/esphome-axp192. The Core2 uses an AXP192 while the Core2 V1.1 uses an AXP2101.
|
|
|
|
*This component does not offer full functionality yet, it only covers part of the AXP2101 features and is not fully tested.*
|
|
|
|
## Installation
|
|
|
|
Copy the components to a custom_components directory next to your .yaml configuration file, or include directly from this repository.
|
|
|
|
## Configuration
|
|
|
|
Sample configurations are found in the `/sample-config` folder.
|
|
|
|
This component adds a new model configuration to the AXP2101 sensor which determines which registers are needed for each device. The only available model is `model: M5CORE2`.
|
|
|
|
### Include AXP2101 Component
|
|
|
|
```yaml
|
|
external_components:
|
|
- source: github://stefanthoss/esphome-axp2101
|
|
components: [ axp2101 ]
|
|
```
|
|
|
|
### M5Stack Core2 V1.1
|
|
|
|
```yaml
|
|
sensor:
|
|
- platform: axp2101
|
|
model: M5CORE2
|
|
address: 0x34
|
|
i2c_id: bus_a
|
|
update_interval: 30s
|
|
brightness: 75%
|
|
battery_level:
|
|
name: "Battery Level"
|
|
id: battery_level
|
|
```
|
|
|
|
The display component required for the M5Stack Core2 V1.1 is as follows:
|
|
|
|
```yaml
|
|
font:
|
|
- file: "gfonts://Roboto"
|
|
id: roboto
|
|
size: 24
|
|
|
|
display:
|
|
- platform: ili9xxx
|
|
model: M5STACK
|
|
dimensions: 320x240
|
|
cs_pin: GPIO5
|
|
dc_pin: GPIO15
|
|
lambda: |-
|
|
it.print(0, 0, id(roboto), "Hello World");
|
|
```
|