[slow_pwm] Fix dump_summary deprecation warning

esphome/components/atm90e32/atm90e32.cpp

@@ -108,14 +108,10 @@ void ATM90E32Component::update() {
 #endif
 }
 
-void ATM90E32Component::get_cs_summary_(std::span<char, GPIO_SUMMARY_MAX_LEN> buffer) {
-  this->cs_->dump_summary(buffer.data(), buffer.size());
-}
-
 void ATM90E32Component::setup() {
   this->spi_setup();
-  char cs[GPIO_SUMMARY_MAX_LEN];
-  this->get_cs_summary_(cs);
+  this->cs_summary_ = this->cs_->dump_summary();
+  const char *cs = this->cs_summary_.c_str();
 
   uint16_t mmode0 = 0x87;  // 3P4W 50Hz
   uint16_t high_thresh = 0;
@@ -163,13 +159,13 @@ void ATM90E32Component::setup() {
   if (this->enable_offset_calibration_) {
     // Initialize flash storage for offset calibrations
     uint32_t o_hash = fnv1_hash("_offset_calibration_");
-    o_hash = fnv1_hash_extend(o_hash, cs);
+    o_hash = fnv1_hash_extend(o_hash, this->cs_summary_);
     this->offset_pref_ = global_preferences->make_preference<OffsetCalibration[3]>(o_hash, true);
     this->restore_offset_calibrations_();
 
     // Initialize flash storage for power offset calibrations
     uint32_t po_hash = fnv1_hash("_power_offset_calibration_");
-    po_hash = fnv1_hash_extend(po_hash, cs);
+    po_hash = fnv1_hash_extend(po_hash, this->cs_summary_);
     this->power_offset_pref_ = global_preferences->make_preference<PowerOffsetCalibration[3]>(po_hash, true);
     this->restore_power_offset_calibrations_();
   } else {
@@ -190,7 +186,7 @@ void ATM90E32Component::setup() {
   if (this->enable_gain_calibration_) {
     // Initialize flash storage for gain calibration
     uint32_t g_hash = fnv1_hash("_gain_calibration_");
-    g_hash = fnv1_hash_extend(g_hash, cs);
+    g_hash = fnv1_hash_extend(g_hash, this->cs_summary_);
     this->gain_calibration_pref_ = global_preferences->make_preference<GainCalibration[3]>(g_hash, true);
     this->restore_gain_calibrations_();
 
@@ -221,8 +217,7 @@ void ATM90E32Component::setup() {
 }
 
 void ATM90E32Component::log_calibration_status_() {
-  char cs[GPIO_SUMMARY_MAX_LEN];
-  this->get_cs_summary_(cs);
+  const char *cs = this->cs_summary_.c_str();
 
   bool offset_mismatch = false;
   bool power_mismatch = false;
@@ -573,8 +568,7 @@ float ATM90E32Component::get_chip_temperature_() {
 }
 
 void ATM90E32Component::run_gain_calibrations() {
-  char cs[GPIO_SUMMARY_MAX_LEN];
-  this->get_cs_summary_(cs);
+  const char *cs = this->cs_summary_.c_str();
   if (!this->enable_gain_calibration_) {
     ESP_LOGW(TAG, "[CALIBRATION][%s] Gain calibration is disabled! Enable it first with enable_gain_calibration: true",
              cs);
@@ -674,8 +668,7 @@ void ATM90E32Component::run_gain_calibrations() {
 }
 
 void ATM90E32Component::save_gain_calibration_to_memory_() {
-  char cs[GPIO_SUMMARY_MAX_LEN];
-  this->get_cs_summary_(cs);
+  const char *cs = this->cs_summary_.c_str();
   bool success = this->gain_calibration_pref_.save(&this->gain_phase_);
   global_preferences->sync();
   if (success) {
@@ -688,8 +681,7 @@ void ATM90E32Component::save_gain_calibration_to_memory_() {
 }
 
 void ATM90E32Component::save_offset_calibration_to_memory_() {
-  char cs[GPIO_SUMMARY_MAX_LEN];
-  this->get_cs_summary_(cs);
+  const char *cs = this->cs_summary_.c_str();
   bool success = this->offset_pref_.save(&this->offset_phase_);
   global_preferences->sync();
   if (success) {
@@ -705,8 +697,7 @@ void ATM90E32Component::save_offset_calibration_to_memory_() {
 }
 
 void ATM90E32Component::save_power_offset_calibration_to_memory_() {
-  char cs[GPIO_SUMMARY_MAX_LEN];
-  this->get_cs_summary_(cs);
+  const char *cs = this->cs_summary_.c_str();
   bool success = this->power_offset_pref_.save(&this->power_offset_phase_);
   global_preferences->sync();
   if (success) {
@@ -722,8 +713,7 @@ void ATM90E32Component::save_power_offset_calibration_to_memory_() {
 }
 
 void ATM90E32Component::run_offset_calibrations() {
-  char cs[GPIO_SUMMARY_MAX_LEN];
-  this->get_cs_summary_(cs);
+  const char *cs = this->cs_summary_.c_str();
   if (!this->enable_offset_calibration_) {
     ESP_LOGW(TAG,
              "[CALIBRATION][%s] Offset calibration is disabled! Enable it first with enable_offset_calibration: true",
@@ -753,8 +743,7 @@ void ATM90E32Component::run_offset_calibrations() {
 }
 
 void ATM90E32Component::run_power_offset_calibrations() {
-  char cs[GPIO_SUMMARY_MAX_LEN];
-  this->get_cs_summary_(cs);
+  const char *cs = this->cs_summary_.c_str();
   if (!this->enable_offset_calibration_) {
     ESP_LOGW(
         TAG,
@@ -827,8 +816,7 @@ void ATM90E32Component::write_power_offsets_to_registers_(uint8_t phase, int16_t
 }
 
 void ATM90E32Component::restore_gain_calibrations_() {
-  char cs[GPIO_SUMMARY_MAX_LEN];
-  this->get_cs_summary_(cs);
+  const char *cs = this->cs_summary_.c_str();
   for (uint8_t i = 0; i < 3; ++i) {
     this->config_gain_phase_[i].voltage_gain = this->phase_[i].voltage_gain_;
     this->config_gain_phase_[i].current_gain = this->phase_[i].ct_gain_;
@@ -882,8 +870,7 @@ void ATM90E32Component::restore_gain_calibrations_() {
 }
 
 void ATM90E32Component::restore_offset_calibrations_() {
-  char cs[GPIO_SUMMARY_MAX_LEN];
-  this->get_cs_summary_(cs);
+  const char *cs = this->cs_summary_.c_str();
   for (uint8_t i = 0; i < 3; ++i)
     this->config_offset_phase_[i] = this->offset_phase_[i];
 
@@ -925,8 +912,7 @@ void ATM90E32Component::restore_offset_calibrations_() {
 }
 
 void ATM90E32Component::restore_power_offset_calibrations_() {
-  char cs[GPIO_SUMMARY_MAX_LEN];
-  this->get_cs_summary_(cs);
+  const char *cs = this->cs_summary_.c_str();
   for (uint8_t i = 0; i < 3; ++i)
     this->config_power_offset_phase_[i] = this->power_offset_phase_[i];
 
@@ -968,8 +954,7 @@ void ATM90E32Component::restore_power_offset_calibrations_() {
 }
 
 void ATM90E32Component::clear_gain_calibrations() {
-  char cs[GPIO_SUMMARY_MAX_LEN];
-  this->get_cs_summary_(cs);
+  const char *cs = this->cs_summary_.c_str();
   if (!this->using_saved_calibrations_) {
     ESP_LOGI(TAG, "[CALIBRATION][%s] No stored gain calibrations to clear. Current values:", cs);
     ESP_LOGI(TAG, "[CALIBRATION][%s] ----------------------------------------------------------", cs);
@@ -1018,8 +1003,7 @@ void ATM90E32Component::clear_gain_calibrations() {
 }
 
 void ATM90E32Component::clear_offset_calibrations() {
-  char cs[GPIO_SUMMARY_MAX_LEN];
-  this->get_cs_summary_(cs);
+  const char *cs = this->cs_summary_.c_str();
   if (!this->restored_offset_calibration_) {
     ESP_LOGI(TAG, "[CALIBRATION][%s] No stored offset calibrations to clear. Current values:", cs);
     ESP_LOGI(TAG, "[CALIBRATION][%s] --------------------------------------------------------------", cs);
@@ -1061,8 +1045,7 @@ void ATM90E32Component::clear_offset_calibrations() {
 }
 
 void ATM90E32Component::clear_power_offset_calibrations() {
-  char cs[GPIO_SUMMARY_MAX_LEN];
-  this->get_cs_summary_(cs);
+  const char *cs = this->cs_summary_.c_str();
   if (!this->restored_power_offset_calibration_) {
     ESP_LOGI(TAG, "[CALIBRATION][%s] No stored power offsets to clear. Current values:", cs);
     ESP_LOGI(TAG, "[CALIBRATION][%s] ---------------------------------------------------------------------", cs);
@@ -1137,8 +1120,7 @@ int16_t ATM90E32Component::calibrate_power_offset(uint8_t phase, bool reactive)
 }
 
 bool ATM90E32Component::verify_gain_writes_() {
-  char cs[GPIO_SUMMARY_MAX_LEN];
-  this->get_cs_summary_(cs);
+  const char *cs = this->cs_summary_.c_str();
   bool success = true;
   for (uint8_t phase = 0; phase < 3; phase++) {
     uint16_t read_voltage = this->read16_(voltage_gain_registers[phase]);

esphome/components/atm90e32/atm90e32.h

@@ -1,13 +1,11 @@
 #pragma once
 
-#include <span>
 #include <unordered_map>
 #include "atm90e32_reg.h"
 #include "esphome/components/sensor/sensor.h"
 #include "esphome/components/spi/spi.h"
 #include "esphome/core/application.h"
 #include "esphome/core/component.h"
-#include "esphome/core/gpio.h"
 #include "esphome/core/helpers.h"
 #include "esphome/core/preferences.h"
 
@@ -184,7 +182,6 @@ class ATM90E32Component : public PollingComponent,
   bool verify_gain_writes_();
   bool validate_spi_read_(uint16_t expected, const char *context = nullptr);
   void log_calibration_status_();
-  void get_cs_summary_(std::span<char, GPIO_SUMMARY_MAX_LEN> buffer);
 
   struct ATM90E32Phase {
     uint16_t voltage_gain_{0};
@@ -250,6 +247,7 @@ class ATM90E32Component : public PollingComponent,
   ESPPreferenceObject offset_pref_;
   ESPPreferenceObject power_offset_pref_;
   ESPPreferenceObject gain_calibration_pref_;
+  std::string cs_summary_;
 
   sensor::Sensor *freq_sensor_{nullptr};
 #ifdef USE_TEXT_SENSOR

esphome/components/ir_rf_proxy/ir_rf_proxy.h

@@ -5,6 +5,8 @@
 // Once the API is considered stable, this warning will be removed.
 
 #include "esphome/components/infrared/infrared.h"
+#include "esphome/components/remote_transmitter/remote_transmitter.h"
+#include "esphome/components/remote_receiver/remote_receiver.h"
 
 namespace esphome::ir_rf_proxy {
 

esphome/components/mipi_rgb/mipi_rgb.cpp

@@ -1,11 +1,9 @@
 #ifdef USE_ESP32_VARIANT_ESP32S3
 #include "mipi_rgb.h"
-#include "esphome/core/gpio.h"
-#include "esphome/core/hal.h"
 #include "esphome/core/helpers.h"
 #include "esphome/core/log.h"
+#include "esphome/core/hal.h"
 #include "esp_lcd_panel_rgb.h"
-#include <span>
 
 namespace esphome {
 namespace mipi_rgb {
@@ -345,27 +343,19 @@ int MipiRgb::get_height() {
   }
 }
 
-static const char *get_pin_name(GPIOPin *pin, std::span<char, GPIO_SUMMARY_MAX_LEN> buffer) {
+static std::string get_pin_name(GPIOPin *pin) {
   if (pin == nullptr)
     return "None";
-  pin->dump_summary(buffer.data(), buffer.size());
-  return buffer.data();
+  return pin->dump_summary();
 }
 
 void MipiRgb::dump_pins_(uint8_t start, uint8_t end, const char *name, uint8_t offset) {
-  char pin_summary[GPIO_SUMMARY_MAX_LEN];
   for (uint8_t i = start; i != end; i++) {
-    this->data_pins_[i]->dump_summary(pin_summary, sizeof(pin_summary));
-    ESP_LOGCONFIG(TAG, "  %s pin %d: %s", name, offset++, pin_summary);
+    ESP_LOGCONFIG(TAG, "  %s pin %d: %s", name, offset++, this->data_pins_[i]->dump_summary().c_str());
   }
 }
 
 void MipiRgb::dump_config() {
-  char reset_buf[GPIO_SUMMARY_MAX_LEN];
-  char de_buf[GPIO_SUMMARY_MAX_LEN];
-  char pclk_buf[GPIO_SUMMARY_MAX_LEN];
-  char hsync_buf[GPIO_SUMMARY_MAX_LEN];
-  char vsync_buf[GPIO_SUMMARY_MAX_LEN];
   ESP_LOGCONFIG(TAG,
                 "MIPI_RGB LCD"
                 "\n  Model: %s"
@@ -389,9 +379,9 @@ void MipiRgb::dump_config() {
                 this->model_, this->width_, this->height_, this->rotation_, YESNO(this->pclk_inverted_),
                 this->hsync_pulse_width_, this->hsync_back_porch_, this->hsync_front_porch_, this->vsync_pulse_width_,
                 this->vsync_back_porch_, this->vsync_front_porch_, YESNO(this->invert_colors_),
-                (unsigned) (this->pclk_frequency_ / 1000000), get_pin_name(this->reset_pin_, reset_buf),
-                get_pin_name(this->de_pin_, de_buf), get_pin_name(this->pclk_pin_, pclk_buf),
-                get_pin_name(this->hsync_pin_, hsync_buf), get_pin_name(this->vsync_pin_, vsync_buf));
+                (unsigned) (this->pclk_frequency_ / 1000000), get_pin_name(this->reset_pin_).c_str(),
+                get_pin_name(this->de_pin_).c_str(), get_pin_name(this->pclk_pin_).c_str(),
+                get_pin_name(this->hsync_pin_).c_str(), get_pin_name(this->vsync_pin_).c_str());
 
   this->dump_pins_(8, 13, "Blue", 0);
   this->dump_pins_(13, 16, "Green", 0);

esphome/components/rpi_dpi_rgb/rpi_dpi_rgb.cpp

@@ -1,6 +1,5 @@
 #ifdef USE_ESP32_VARIANT_ESP32S3
 #include "rpi_dpi_rgb.h"
-#include "esphome/core/gpio.h"
 #include "esphome/core/log.h"
 
 namespace esphome {
@@ -135,11 +134,8 @@ void RpiDpiRgb::dump_config() {
   LOG_PIN("  Enable Pin: ", this->enable_pin_);
   LOG_PIN("  Reset Pin: ", this->reset_pin_);
   size_t data_pin_count = sizeof(this->data_pins_) / sizeof(this->data_pins_[0]);
-  char pin_summary[GPIO_SUMMARY_MAX_LEN];
-  for (size_t i = 0; i != data_pin_count; i++) {
-    this->data_pins_[i]->dump_summary(pin_summary, sizeof(pin_summary));
-    ESP_LOGCONFIG(TAG, "  Data pin %d: %s", i, pin_summary);
-  }
+  for (size_t i = 0; i != data_pin_count; i++)
+    ESP_LOGCONFIG(TAG, "  Data pin %d: %s", i, (this->data_pins_[i])->dump_summary().c_str());
 }
 
 void RpiDpiRgb::reset_display_() const {

esphome/components/sensor/filter.cpp

@@ -445,18 +445,22 @@ optional<float> CalibratePolynomialFilter::new_value(float value) {
 ClampFilter::ClampFilter(float min, float max, bool ignore_out_of_range)
     : min_(min), max_(max), ignore_out_of_range_(ignore_out_of_range) {}
 optional<float> ClampFilter::new_value(float value) {
-  if (std::isfinite(this->min_) && !(value >= this->min_)) {
-    if (this->ignore_out_of_range_) {
-      return {};
+  if (std::isfinite(value)) {
+    if (std::isfinite(this->min_) && value < this->min_) {
+      if (this->ignore_out_of_range_) {
+        return {};
+      } else {
+        return this->min_;
+      }
     }
-    return this->min_;
-  }
 
-  if (std::isfinite(this->max_) && !(value <= this->max_)) {
-    if (this->ignore_out_of_range_) {
-      return {};
+    if (std::isfinite(this->max_) && value > this->max_) {
+      if (this->ignore_out_of_range_) {
+        return {};
+      } else {
+        return this->max_;
+      }
     }
-    return this->max_;
   }
   return value;
 }

esphome/components/slow_pwm/slow_pwm_output.cpp

@@ -1,6 +1,7 @@
 #include "slow_pwm_output.h"
-#include "esphome/core/log.h"
 #include "esphome/core/application.h"
+#include "esphome/core/gpio.h"
+#include "esphome/core/log.h"
 
 namespace esphome {
 namespace slow_pwm {
@@ -20,7 +21,9 @@ void SlowPWMOutput::set_output_state_(bool new_state) {
   }
   if (new_state != current_state_) {
     if (this->pin_) {
-      ESP_LOGV(TAG, "Switching output pin %s to %s", this->pin_->dump_summary().c_str(), ONOFF(new_state));
+      char pin_summary[GPIO_SUMMARY_MAX_LEN];
+      this->pin_->dump_summary(pin_summary, sizeof(pin_summary));
+      ESP_LOGV(TAG, "Switching output pin %s to %s", pin_summary, ONOFF(new_state));
     } else {
       ESP_LOGV(TAG, "Switching to %s", ONOFF(new_state));
     }

esphome/components/st7701s/st7701s.cpp

@@ -1,6 +1,5 @@
 #ifdef USE_ESP32_VARIANT_ESP32S3
 #include "st7701s.h"
-#include "esphome/core/gpio.h"
 #include "esphome/core/log.h"
 
 namespace esphome {
@@ -184,11 +183,8 @@ void ST7701S::dump_config() {
   LOG_PIN("  DE Pin: ", this->de_pin_);
   LOG_PIN("  Reset Pin: ", this->reset_pin_);
   size_t data_pin_count = sizeof(this->data_pins_) / sizeof(this->data_pins_[0]);
-  char pin_summary[GPIO_SUMMARY_MAX_LEN];
-  for (size_t i = 0; i != data_pin_count; i++) {
-    this->data_pins_[i]->dump_summary(pin_summary, sizeof(pin_summary));
-    ESP_LOGCONFIG(TAG, "  Data pin %d: %s", i, pin_summary);
-  }
+  for (size_t i = 0; i != data_pin_count; i++)
+    ESP_LOGCONFIG(TAG, "  Data pin %d: %s", i, (this->data_pins_[i])->dump_summary().c_str());
   ESP_LOGCONFIG(TAG, "  SPI Data rate: %dMHz", (unsigned) (this->data_rate_ / 1000000));
 }
 

esphome/components/wifi/wifi_component.cpp

@@ -746,32 +746,16 @@ void WiFiComponent::setup_ap_config_() {
     return;
 
   if (this->ap_.get_ssid().empty()) {
-    // Build AP SSID from app name without heap allocation
-    // WiFi SSID max is 32 bytes, with MAC suffix we keep first 25 + last 7
-    static constexpr size_t AP_SSID_MAX_LEN = 32;
-    static constexpr size_t AP_SSID_PREFIX_LEN = 25;
-    static constexpr size_t AP_SSID_SUFFIX_LEN = 7;
-
-    const std::string &app_name = App.get_name();
-    const char *name_ptr = app_name.c_str();
-    size_t name_len = app_name.length();
-
-    if (name_len <= AP_SSID_MAX_LEN) {
-      // Name fits, use directly
-      this->ap_.set_ssid(name_ptr);
-    } else {
-      // Name too long, need to truncate into stack buffer
-      char ssid_buf[AP_SSID_MAX_LEN + 1];
+    std::string name = App.get_name();
+    if (name.length() > 32) {
       if (App.is_name_add_mac_suffix_enabled()) {
         // Keep first 25 chars and last 7 chars (MAC suffix), remove middle
-        memcpy(ssid_buf, name_ptr, AP_SSID_PREFIX_LEN);
-        memcpy(ssid_buf + AP_SSID_PREFIX_LEN, name_ptr + name_len - AP_SSID_SUFFIX_LEN, AP_SSID_SUFFIX_LEN);
+        name.erase(25, name.length() - 32);
       } else {
-        memcpy(ssid_buf, name_ptr, AP_SSID_MAX_LEN);
+        name.resize(32);
       }
-      ssid_buf[AP_SSID_MAX_LEN] = '\0';
-      this->ap_.set_ssid(ssid_buf);
     }
+    this->ap_.set_ssid(name);
   }
   this->ap_setup_ = this->wifi_start_ap_(this->ap_);
 

tests/components/ir_rf_proxy/common-rx.yaml

@@ -1,18 +0,0 @@
-remote_receiver:
-  id: ir_receiver
-  pin: ${rx_pin}
-
-# Test various hardware types with transmitter/receiver using infrared platform
-infrared:
-  # Infrared receiver
-  - platform: ir_rf_proxy
-    id: ir_rx
-    name: "IR Receiver"
-    remote_receiver_id: ir_receiver
-
-  # RF 900MHz receiver
-  - platform: ir_rf_proxy
-    id: rf_900_rx
-    name: "RF 900 Receiver"
-    frequency: 900 MHz
-    remote_receiver_id: ir_receiver

tests/components/ir_rf_proxy/common-tx.yaml

@@ -1,19 +0,0 @@
-remote_transmitter:
-  id: ir_transmitter
-  pin: ${tx_pin}
-  carrier_duty_percent: 50%
-
-# Test various hardware types with transmitter/receiver using infrared platform
-infrared:
-  # Infrared transmitter
-  - platform: ir_rf_proxy
-    id: ir_tx
-    name: "IR Transmitter"
-    remote_transmitter_id: ir_transmitter
-
-  # RF 433MHz transmitter
-  - platform: ir_rf_proxy
-    id: rf_433_tx
-    name: "RF 433 Transmitter"
-    frequency: 433 MHz
-    remote_transmitter_id: ir_transmitter

tests/components/ir_rf_proxy/common.yaml

@@ -1,7 +1,42 @@
-network:
-
 wifi:
   ssid: MySSID
   password: password1
 
 api:
+
+remote_transmitter:
+  id: ir_transmitter
+  pin: ${tx_pin}
+  carrier_duty_percent: 50%
+
+remote_receiver:
+  id: ir_receiver
+  pin: ${rx_pin}
+
+# Test various hardware types with transmitter/receiver using infrared platform
+infrared:
+  # Infrared transmitter
+  - platform: ir_rf_proxy
+    id: ir_tx
+    name: "IR Transmitter"
+    remote_transmitter_id: ir_transmitter
+
+  # Infrared receiver
+  - platform: ir_rf_proxy
+    id: ir_rx
+    name: "IR Receiver"
+    remote_receiver_id: ir_receiver
+
+  # RF 433MHz transmitter
+  - platform: ir_rf_proxy
+    id: rf_433_tx
+    name: "RF 433 Transmitter"
+    frequency: 433 MHz
+    remote_transmitter_id: ir_transmitter
+
+  # RF 900MHz receiver
+  - platform: ir_rf_proxy
+    id: rf_900_rx
+    name: "RF 900 Receiver"
+    frequency: 900 MHz
+    remote_receiver_id: ir_receiver

tests/components/ir_rf_proxy/test-rx.esp32-idf.yaml

@@ -1,7 +0,0 @@
-substitutions:
-  tx_pin: GPIO4
-  rx_pin: GPIO5
-
-packages:
-  common: !include common.yaml
-  rx: !include common-rx.yaml

tests/components/ir_rf_proxy/test-rx.esp8266-ard.yaml

@@ -1,7 +0,0 @@
-substitutions:
-  tx_pin: GPIO4
-  rx_pin: GPIO5
-
-packages:
-  common: !include common.yaml
-  rx: !include common-rx.yaml

tests/components/ir_rf_proxy/test-rx.rp2040-ard.yaml

@@ -1,7 +0,0 @@
-substitutions:
-  tx_pin: GPIO4
-  rx_pin: GPIO5
-
-packages:
-  common: !include common.yaml
-  rx: !include common-rx.yaml

tests/components/ir_rf_proxy/test-tx.esp32-idf.yaml

@@ -1,7 +0,0 @@
-substitutions:
-  tx_pin: GPIO4
-  rx_pin: GPIO5
-
-packages:
-  common: !include common.yaml
-  tx: !include common-tx.yaml

tests/components/ir_rf_proxy/test-tx.esp8266-ard.yaml

@@ -1,7 +0,0 @@
-substitutions:
-  tx_pin: GPIO4
-  rx_pin: GPIO5
-
-packages:
-  common: !include common.yaml
-  tx: !include common-tx.yaml

tests/components/ir_rf_proxy/test-tx.rp2040-ard.yaml

@@ -1,7 +0,0 @@
-substitutions:
-  tx_pin: GPIO4
-  rx_pin: GPIO5
-
-packages:
-  common: !include common.yaml
-  tx: !include common-tx.yaml

tests/components/ir_rf_proxy/test.bk72xx-ard.yaml

@@ -1,8 +0,0 @@
-substitutions:
-  tx_pin: GPIO4
-  rx_pin: GPIO5
-
-packages:
-  common: !include common.yaml
-  rx: !include common-rx.yaml
-  tx: !include common-tx.yaml

tests/components/ir_rf_proxy/test.esp32-idf.yaml

@@ -2,7 +2,4 @@ substitutions:
   tx_pin: GPIO4
   rx_pin: GPIO5
 
-packages:
-  common: !include common.yaml
-  rx: !include common-rx.yaml
-  tx: !include common-tx.yaml
+<<: !include common.yaml

tests/components/ir_rf_proxy/test.esp8266-ard.yaml

@@ -2,7 +2,4 @@ substitutions:
   tx_pin: GPIO4
   rx_pin: GPIO5
 
-packages:
-  common: !include common.yaml
-  rx: !include common-rx.yaml
-  tx: !include common-tx.yaml
+<<: !include common.yaml

tests/components/ir_rf_proxy/test.rp2040-ard.yaml

@@ -2,7 +2,4 @@ substitutions:
   tx_pin: GPIO4
   rx_pin: GPIO5
 
-packages:
-  common: !include common.yaml
-  rx: !include common-rx.yaml
-  tx: !include common-tx.yaml
+<<: !include common.yaml

tests/components/template/common-base.yaml

@@ -117,7 +117,6 @@ sensor:
             - 10.0 -> 12.1
             - 13.0 -> 14.0
       - clamp:
-          # Infinity and NaN will be clamped (NaN -> min_value, +Infinity -> max_value, -Infinity -> min_value)
           max_value: 10.0
           min_value: -10.0
       - debounce: 0.1s