[network] Fix IPAddress::str_to() to lowercase IPv6 hex digits (#13325)

Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

esphome/codegen.py

@@ -69,7 +69,6 @@ from esphome.cpp_types import (  # noqa: F401
     JsonObjectConst,
     Parented,
     PollingComponent,
-    StringRef,
     arduino_json_ns,
     bool_,
     const_char_ptr,

esphome/components/atm90e32/atm90e32.cpp

@@ -158,12 +158,14 @@ void ATM90E32Component::setup() {
 
   if (this->enable_offset_calibration_) {
     // Initialize flash storage for offset calibrations
-    uint32_t o_hash = fnv1_hash(std::string("_offset_calibration_") + this->cs_summary_);
+    uint32_t o_hash = fnv1_hash("_offset_calibration_");
+    o_hash = fnv1_hash_extend(o_hash, this->cs_summary_);
     this->offset_pref_ = global_preferences->make_preference<OffsetCalibration[3]>(o_hash, true);
     this->restore_offset_calibrations_();
 
     // Initialize flash storage for power offset calibrations
-    uint32_t po_hash = fnv1_hash(std::string("_power_offset_calibration_") + this->cs_summary_);
+    uint32_t po_hash = fnv1_hash("_power_offset_calibration_");
+    po_hash = fnv1_hash_extend(po_hash, this->cs_summary_);
     this->power_offset_pref_ = global_preferences->make_preference<PowerOffsetCalibration[3]>(po_hash, true);
     this->restore_power_offset_calibrations_();
   } else {
@@ -183,7 +185,8 @@ void ATM90E32Component::setup() {
 
   if (this->enable_gain_calibration_) {
     // Initialize flash storage for gain calibration
-    uint32_t g_hash = fnv1_hash(std::string("_gain_calibration_") + this->cs_summary_);
+    uint32_t g_hash = fnv1_hash("_gain_calibration_");
+    g_hash = fnv1_hash_extend(g_hash, this->cs_summary_);
     this->gain_calibration_pref_ = global_preferences->make_preference<GainCalibration[3]>(g_hash, true);
     this->restore_gain_calibrations_();
 

esphome/components/event/__init__.py

@@ -90,7 +90,9 @@ async def setup_event_core_(var, config, *, event_types: list[str]):
 
     for conf in config.get(CONF_ON_EVENT, []):
         trigger = cg.new_Pvariable(conf[CONF_TRIGGER_ID], var)
-        await automation.build_automation(trigger, [(cg.StringRef, "event_type")], conf)
+        await automation.build_automation(
+            trigger, [(cg.std_string, "event_type")], conf
+        )
 
     cg.add(var.set_event_types(event_types))
 

esphome/components/event/automation.h

@@ -14,10 +14,10 @@ template<typename... Ts> class TriggerEventAction : public Action<Ts...>, public
   void play(const Ts &...x) override { this->parent_->trigger(this->event_type_.value(x...)); }
 };
 
-class EventTrigger : public Trigger<StringRef> {
+class EventTrigger : public Trigger<std::string> {
  public:
   EventTrigger(Event *event) {
-    event->add_on_event_callback([this](StringRef event_type) { this->trigger(event_type); });
+    event->add_on_event_callback([this](const std::string &event_type) { this->trigger(event_type); });
   }
 };
 

esphome/components/event/event.cpp

@@ -23,7 +23,7 @@ void Event::trigger(const std::string &event_type) {
   }
   this->last_event_type_ = found;
   ESP_LOGD(TAG, "'%s' >> '%s'", this->get_name().c_str(), this->last_event_type_);
-  this->event_callback_.call(StringRef(found));
+  this->event_callback_.call(event_type);
 #if defined(USE_EVENT) && defined(USE_CONTROLLER_REGISTRY)
   ControllerRegistry::notify_event(this);
 #endif
@@ -45,7 +45,7 @@ void Event::set_event_types(const std::vector<const char *> &event_types) {
   this->last_event_type_ = nullptr;  // Reset when types change
 }
 
-void Event::add_on_event_callback(std::function<void(StringRef event_type)> &&callback) {
+void Event::add_on_event_callback(std::function<void(const std::string &event_type)> &&callback) {
   this->event_callback_.add(std::move(callback));
 }
 

esphome/components/event/event.h

@@ -70,10 +70,10 @@ class Event : public EntityBase, public EntityBase_DeviceClass {
   /// Check if an event has been triggered.
   bool has_event() const { return this->last_event_type_ != nullptr; }
 
-  void add_on_event_callback(std::function<void(StringRef event_type)> &&callback);
+  void add_on_event_callback(std::function<void(const std::string &event_type)> &&callback);
 
  protected:
-  LazyCallbackManager<void(StringRef event_type)> event_callback_;
+  LazyCallbackManager<void(const std::string &event_type)> event_callback_;
   FixedVector<const char *> types_;
 
  private:

esphome/components/fan/__init__.py

@@ -77,7 +77,7 @@ FanSpeedSetTrigger = fan_ns.class_(
     "FanSpeedSetTrigger", automation.Trigger.template(cg.int_)
 )
 FanPresetSetTrigger = fan_ns.class_(
-    "FanPresetSetTrigger", automation.Trigger.template(cg.StringRef)
+    "FanPresetSetTrigger", automation.Trigger.template(cg.std_string)
 )
 
 FanIsOnCondition = fan_ns.class_("FanIsOnCondition", automation.Condition.template())
@@ -287,7 +287,7 @@ async def setup_fan_core_(var, config):
         await automation.build_automation(trigger, [(cg.int_, "x")], conf)
     for conf in config.get(CONF_ON_PRESET_SET, []):
         trigger = cg.new_Pvariable(conf[CONF_TRIGGER_ID], var)
-        await automation.build_automation(trigger, [(cg.StringRef, "x")], conf)
+        await automation.build_automation(trigger, [(cg.std_string, "x")], conf)
 
 
 async def register_fan(var, config):

esphome/components/fan/automation.h

@@ -208,7 +208,7 @@ class FanSpeedSetTrigger : public Trigger<int> {
   int last_speed_;
 };
 
-class FanPresetSetTrigger : public Trigger<StringRef> {
+class FanPresetSetTrigger : public Trigger<std::string> {
  public:
   FanPresetSetTrigger(Fan *state) {
     state->add_on_state_callback([this, state]() {
@@ -216,7 +216,7 @@ class FanPresetSetTrigger : public Trigger<StringRef> {
       auto should_trigger = preset_mode != this->last_preset_mode_;
       this->last_preset_mode_ = preset_mode;
       if (should_trigger) {
-        this->trigger(preset_mode);
+        this->trigger(std::string(preset_mode));
       }
     });
     this->last_preset_mode_ = state->get_preset_mode();

esphome/components/light/light_json_schema.cpp

@@ -1,4 +1,5 @@
 #include "light_json_schema.h"
+#include "color_mode.h"
 #include "light_output.h"
 #include "esphome/core/progmem.h"
 
@@ -8,29 +9,32 @@ namespace esphome::light {
 
 // See https://www.home-assistant.io/integrations/light.mqtt/#json-schema for documentation on the schema
 
-// Get JSON string for color mode using linear search (avoids large switch jump table)
-static const char *get_color_mode_json_str(ColorMode mode) {
-  // Parallel arrays: mode values and their corresponding strings
-  // Uses less RAM than a switch jump table on sparse enum values
-  static constexpr ColorMode MODES[] = {
-      ColorMode::ON_OFF,
-      ColorMode::BRIGHTNESS,
-      ColorMode::WHITE,
-      ColorMode::COLOR_TEMPERATURE,
-      ColorMode::COLD_WARM_WHITE,
-      ColorMode::RGB,
-      ColorMode::RGB_WHITE,
-      ColorMode::RGB_COLOR_TEMPERATURE,
-      ColorMode::RGB_COLD_WARM_WHITE,
-  };
-  static constexpr const char *STRINGS[] = {
-      "onoff", "brightness", "white", "color_temp", "cwww", "rgb", "rgbw", "rgbct", "rgbww",
-  };
-  for (size_t i = 0; i < sizeof(MODES) / sizeof(MODES[0]); i++) {
-    if (MODES[i] == mode)
-      return STRINGS[i];
+// Get JSON string for color mode.
+// ColorMode enum values are sparse bitmasks (0, 1, 3, 7, 11, 19, 35, 39, 47, 51) which would
+// generate a large jump table. Converting to bit index (0-9) allows a compact switch.
+static ProgmemStr get_color_mode_json_str(ColorMode mode) {
+  switch (ColorModeBitPolicy::to_bit(mode)) {
+    case 1:
+      return ESPHOME_F("onoff");
+    case 2:
+      return ESPHOME_F("brightness");
+    case 3:
+      return ESPHOME_F("white");
+    case 4:
+      return ESPHOME_F("color_temp");
+    case 5:
+      return ESPHOME_F("cwww");
+    case 6:
+      return ESPHOME_F("rgb");
+    case 7:
+      return ESPHOME_F("rgbw");
+    case 8:
+      return ESPHOME_F("rgbct");
+    case 9:
+      return ESPHOME_F("rgbww");
+    default:
+      return nullptr;
   }
-  return nullptr;
 }
 
 void LightJSONSchema::dump_json(LightState &state, JsonObject root) {
@@ -44,7 +48,7 @@ void LightJSONSchema::dump_json(LightState &state, JsonObject root) {
   auto values = state.remote_values;
 
   const auto color_mode = values.get_color_mode();
-  const char *mode_str = get_color_mode_json_str(color_mode);
+  const auto *mode_str = get_color_mode_json_str(color_mode);
   if (mode_str != nullptr) {
     root[ESPHOME_F("color_mode")] = mode_str;
   }

esphome/components/modbus_controller/modbus_controller.h

@@ -271,24 +271,31 @@ class ServerRegister {
 
   // Formats a raw value into a string representation based on the value type for debugging
   std::string format_value(int64_t value) const {
+    // max 44: float with %.1f can be up to 42 chars (3.4e38 → 39 integer digits + sign + decimal + 1 digit)
+    // plus null terminator = 43, rounded to 44 for 4-byte alignment
+    char buf[44];
     switch (this->value_type) {
       case SensorValueType::U_WORD:
       case SensorValueType::U_DWORD:
       case SensorValueType::U_DWORD_R:
       case SensorValueType::U_QWORD:
       case SensorValueType::U_QWORD_R:
-        return std::to_string(static_cast<uint64_t>(value));
+        buf_append_printf(buf, sizeof(buf), 0, "%" PRIu64, static_cast<uint64_t>(value));
+        return buf;
       case SensorValueType::S_WORD:
       case SensorValueType::S_DWORD:
       case SensorValueType::S_DWORD_R:
       case SensorValueType::S_QWORD:
       case SensorValueType::S_QWORD_R:
-        return std::to_string(value);
+        buf_append_printf(buf, sizeof(buf), 0, "%" PRId64, value);
+        return buf;
       case SensorValueType::FP32_R:
       case SensorValueType::FP32:
-        return str_sprintf("%.1f", bit_cast<float>(static_cast<uint32_t>(value)));
+        buf_append_printf(buf, sizeof(buf), 0, "%.1f", bit_cast<float>(static_cast<uint32_t>(value)));
+        return buf;
       default:
-        return std::to_string(value);
+        buf_append_printf(buf, sizeof(buf), 0, "%" PRId64, value);
+        return buf;
     }
   }
 

esphome/components/modbus_controller/text_sensor/modbus_textsensor.cpp

@@ -16,12 +16,20 @@ void ModbusTextSensor::parse_and_publish(const std::vector<uint8_t> &data) {
   while ((items_left > 0) && index < data.size()) {
     uint8_t b = data[index];
     switch (this->encode_) {
-      case RawEncoding::HEXBYTES:
-        output_str += str_snprintf("%02x", 2, b);
+      case RawEncoding::HEXBYTES: {
+        // max 3: 2 hex digits + null
+        char hex_buf[3];
+        snprintf(hex_buf, sizeof(hex_buf), "%02x", b);
+        output_str += hex_buf;
         break;
-      case RawEncoding::COMMA:
-        output_str += str_sprintf(index != this->offset ? ",%d" : "%d", b);
+      }
+      case RawEncoding::COMMA: {
+        // max 5: optional ','(1) + uint8(3) + null, for both ",%d" and "%d"
+        char dec_buf[5];
+        snprintf(dec_buf, sizeof(dec_buf), index != this->offset ? ",%d" : "%d", b);
+        output_str += dec_buf;
         break;
+      }
       case RawEncoding::ANSI:
         if (b < 0x20)
           break;

esphome/components/network/ip_address.h

@@ -43,6 +43,14 @@ namespace network {
 /// Buffer size for IP address string (IPv6 max: 39 chars + null)
 static constexpr size_t IP_ADDRESS_BUFFER_SIZE = 40;
 
+/// Lowercase hex digits in IP address string (A-F -> a-f for IPv6 per RFC 5952)
+inline void lowercase_ip_str(char *buf) {
+  for (char *p = buf; *p; ++p) {
+    if (*p >= 'A' && *p <= 'F')
+      *p += 32;
+  }
+}
+
 struct IPAddress {
  public:
 #ifdef USE_HOST
@@ -52,10 +60,15 @@ struct IPAddress {
   }
   IPAddress(const std::string &in_address) { inet_aton(in_address.c_str(), &ip_addr_); }
   IPAddress(const ip_addr_t *other_ip) { ip_addr_ = *other_ip; }
-  std::string str() const { return str_lower_case(inet_ntoa(ip_addr_)); }
+  std::string str() const {
+    char buf[IP_ADDRESS_BUFFER_SIZE];
+    this->str_to(buf);
+    return buf;
+  }
   /// Write IP address to buffer. Buffer must be at least IP_ADDRESS_BUFFER_SIZE bytes.
   char *str_to(char *buf) const {
-    return const_cast<char *>(inet_ntop(AF_INET, &ip_addr_, buf, IP_ADDRESS_BUFFER_SIZE));
+    inet_ntop(AF_INET, &ip_addr_, buf, IP_ADDRESS_BUFFER_SIZE);
+    return buf;  // IPv4 only, no hex letters to lowercase
   }
 #else
   IPAddress() { ip_addr_set_zero(&ip_addr_); }
@@ -134,9 +147,18 @@ struct IPAddress {
   bool is_ip4() const { return IP_IS_V4(&ip_addr_); }
   bool is_ip6() const { return IP_IS_V6(&ip_addr_); }
   bool is_multicast() const { return ip_addr_ismulticast(&ip_addr_); }
-  std::string str() const { return str_lower_case(ipaddr_ntoa(&ip_addr_)); }
+  std::string str() const {
+    char buf[IP_ADDRESS_BUFFER_SIZE];
+    this->str_to(buf);
+    return buf;
+  }
   /// Write IP address to buffer. Buffer must be at least IP_ADDRESS_BUFFER_SIZE bytes.
-  char *str_to(char *buf) const { return ipaddr_ntoa_r(&ip_addr_, buf, IP_ADDRESS_BUFFER_SIZE); }
+  /// Output is lowercased per RFC 5952 (IPv6 hex digits a-f).
+  char *str_to(char *buf) const {
+    ipaddr_ntoa_r(&ip_addr_, buf, IP_ADDRESS_BUFFER_SIZE);
+    lowercase_ip_str(buf);
+    return buf;
+  }
   bool operator==(const IPAddress &other) const { return ip_addr_cmp(&ip_addr_, &other.ip_addr_); }
   bool operator!=(const IPAddress &other) const { return !ip_addr_cmp(&ip_addr_, &other.ip_addr_); }
   IPAddress &operator+=(uint8_t increase) {

esphome/components/opentherm/opentherm.cpp

@@ -561,8 +561,9 @@ const char *OpenTherm::message_id_to_str(MessageId id) {
 }
 
 void OpenTherm::debug_data(OpenthermData &data) {
-  ESP_LOGD(TAG, "%s %s %s %s", format_bin(data.type).c_str(), format_bin(data.id).c_str(),
-           format_bin(data.valueHB).c_str(), format_bin(data.valueLB).c_str());
+  char type_buf[9], id_buf[9], hb_buf[9], lb_buf[9];
+  ESP_LOGD(TAG, "%s %s %s %s", format_bin_to(type_buf, data.type), format_bin_to(id_buf, data.id),
+           format_bin_to(hb_buf, data.valueHB), format_bin_to(lb_buf, data.valueLB));
   ESP_LOGD(TAG, "type: %s; id: %u; HB: %u; LB: %u; uint_16: %u; float: %f",
            this->message_type_to_str((MessageType) data.type), data.id, data.valueHB, data.valueLB, data.u16(),
            data.f88());

esphome/components/pipsolar/output/pipsolar_output.cpp

@@ -9,7 +9,7 @@ static const char *const TAG = "pipsolar.output";
 
 void PipsolarOutput::write_state(float state) {
   char tmp[10];
-  sprintf(tmp, this->set_command_.c_str(), state);
+  snprintf(tmp, sizeof(tmp), this->set_command_, state);
 
   if (std::find(this->possible_values_.begin(), this->possible_values_.end(), state) != this->possible_values_.end()) {
     ESP_LOGD(TAG, "Will write: %s out of value %f / %02.0f", tmp, state, state);

esphome/components/pipsolar/output/pipsolar_output.h

@@ -15,13 +15,15 @@ class PipsolarOutput : public output::FloatOutput {
  public:
   PipsolarOutput() {}
   void set_parent(Pipsolar *parent) { this->parent_ = parent; }
-  void set_set_command(const std::string &command) { this->set_command_ = command; };
+  void set_set_command(const char *command) { this->set_command_ = command; }
+  /// Prevent accidental use of std::string which would dangle
+  void set_set_command(const std::string &command) = delete;
   void set_possible_values(std::vector<float> possible_values) { this->possible_values_ = std::move(possible_values); }
-  void set_value(float value) { this->write_state(value); };
+  void set_value(float value) { this->write_state(value); }
 
  protected:
   void write_state(float state) override;
-  std::string set_command_;
+  const char *set_command_{nullptr};
   Pipsolar *parent_;
   std::vector<float> possible_values_;
 };

esphome/components/pipsolar/switch/pipsolar_switch.cpp

@@ -9,14 +9,9 @@ static const char *const TAG = "pipsolar.switch";
 
 void PipsolarSwitch::dump_config() { LOG_SWITCH("", "Pipsolar Switch", this); }
 void PipsolarSwitch::write_state(bool state) {
-  if (state) {
-    if (!this->on_command_.empty()) {
-      this->parent_->queue_command(this->on_command_);
-    }
-  } else {
-    if (!this->off_command_.empty()) {
-      this->parent_->queue_command(this->off_command_);
-    }
+  const char *command = state ? this->on_command_ : this->off_command_;
+  if (command != nullptr) {
+    this->parent_->queue_command(command);
   }
 }
 

esphome/components/pipsolar/switch/pipsolar_switch.h

@@ -9,15 +9,18 @@ namespace pipsolar {
 class Pipsolar;
 class PipsolarSwitch : public switch_::Switch, public Component {
  public:
-  void set_parent(Pipsolar *parent) { this->parent_ = parent; };
-  void set_on_command(const std::string &command) { this->on_command_ = command; };
-  void set_off_command(const std::string &command) { this->off_command_ = command; };
+  void set_parent(Pipsolar *parent) { this->parent_ = parent; }
+  void set_on_command(const char *command) { this->on_command_ = command; }
+  void set_off_command(const char *command) { this->off_command_ = command; }
+  /// Prevent accidental use of std::string which would dangle
+  void set_on_command(const std::string &command) = delete;
+  void set_off_command(const std::string &command) = delete;
   void dump_config() override;
 
  protected:
   void write_state(bool state) override;
-  std::string on_command_;
-  std::string off_command_;
+  const char *on_command_{nullptr};
+  const char *off_command_{nullptr};
   Pipsolar *parent_;
 };
 

esphome/components/select/__init__.py

@@ -33,7 +33,7 @@ SelectPtr = Select.operator("ptr")
 # Triggers
 SelectStateTrigger = select_ns.class_(
     "SelectStateTrigger",
-    automation.Trigger.template(cg.StringRef, cg.size_t),
+    automation.Trigger.template(cg.std_string, cg.size_t),
 )
 
 # Actions
@@ -100,7 +100,7 @@ async def setup_select_core_(var, config, *, options: list[str]):
     for conf in config.get(CONF_ON_VALUE, []):
         trigger = cg.new_Pvariable(conf[CONF_TRIGGER_ID], var)
         await automation.build_automation(
-            trigger, [(cg.StringRef, "x"), (cg.size_t, "i")], conf
+            trigger, [(cg.std_string, "x"), (cg.size_t, "i")], conf
         )
 
     if (mqtt_id := config.get(CONF_MQTT_ID)) is not None:

esphome/components/select/automation.h

@@ -6,11 +6,11 @@
 
 namespace esphome::select {
 
-class SelectStateTrigger : public Trigger<StringRef, size_t> {
+class SelectStateTrigger : public Trigger<std::string, size_t> {
  public:
   explicit SelectStateTrigger(Select *parent) : parent_(parent) {
     parent->add_on_state_callback(
-        [this](size_t index) { this->trigger(StringRef(this->parent_->option_at(index)), index); });
+        [this](size_t index) { this->trigger(std::string(this->parent_->option_at(index)), index); });
   }
 
  protected:

esphome/components/sun/text_sensor/sun_text_sensor.h

@@ -14,7 +14,9 @@ class SunTextSensor : public text_sensor::TextSensor, public PollingComponent {
   void set_parent(Sun *parent) { parent_ = parent; }
   void set_elevation(double elevation) { elevation_ = elevation; }
   void set_sunrise(bool sunrise) { sunrise_ = sunrise; }
-  void set_format(const std::string &format) { format_ = format; }
+  void set_format(const char *format) { this->format_ = format; }
+  /// Prevent accidental use of std::string which would dangle
+  void set_format(const std::string &format) = delete;
 
   void update() override {
     optional<ESPTime> res;
@@ -29,14 +31,14 @@ class SunTextSensor : public text_sensor::TextSensor, public PollingComponent {
     }
 
     char buf[ESPTime::STRFTIME_BUFFER_SIZE];
-    size_t len = res->strftime_to(buf, this->format_.c_str());
+    size_t len = res->strftime_to(buf, this->format_);
     this->publish_state(buf, len);
   }
 
   void dump_config() override;
 
  protected:
-  std::string format_{};
+  const char *format_{nullptr};
   Sun *parent_;
   double elevation_;
   bool sunrise_;

esphome/components/template/alarm_control_panel/__init__.py

@@ -118,8 +118,7 @@ async def to_code(config):
     var = await alarm_control_panel.new_alarm_control_panel(config)
     await cg.register_component(var, config)
     if CONF_CODES in config:
-        for acode in config[CONF_CODES]:
-            cg.add(var.add_code(acode))
+        cg.add(var.set_codes(config[CONF_CODES]))
         if CONF_REQUIRES_CODE_TO_ARM in config:
             cg.add(var.set_requires_code_to_arm(config[CONF_REQUIRES_CODE_TO_ARM]))
 

esphome/components/template/alarm_control_panel/template_alarm_control_panel.cpp

@@ -206,7 +206,13 @@ bool TemplateAlarmControlPanel::is_code_valid_(optional<std::string> code) {
   if (!this->codes_.empty()) {
     if (code.has_value()) {
       ESP_LOGVV(TAG, "Checking code: %s", code.value().c_str());
-      return (std::count(this->codes_.begin(), this->codes_.end(), code.value()) == 1);
+      // Use strcmp for const char* comparison
+      const char *code_cstr = code.value().c_str();
+      for (const char *stored_code : this->codes_) {
+        if (strcmp(stored_code, code_cstr) == 0)
+          return true;
+      }
+      return false;
     }
     ESP_LOGD(TAG, "No code provided");
     return false;

esphome/components/template/alarm_control_panel/template_alarm_control_panel.h

@@ -1,6 +1,7 @@
 #pragma once
 
 #include <cinttypes>
+#include <cstring>
 #include <vector>
 
 #include "esphome/core/automation.h"
@@ -86,11 +87,14 @@ class TemplateAlarmControlPanel final : public alarm_control_panel::AlarmControl
                   AlarmSensorType type = ALARM_SENSOR_TYPE_DELAYED);
 #endif
 
-  /** add a code
+  /** Set the codes (from initializer list).
    *
-   * @param code The code
+   * @param codes The list of valid codes
    */
-  void add_code(const std::string &code) { this->codes_.push_back(code); }
+  void set_codes(std::initializer_list<const char *> codes) { this->codes_ = codes; }
+
+  // Deleted overload to catch incorrect std::string usage at compile time
+  void set_codes(std::initializer_list<std::string> codes) = delete;
 
   /** set requires a code to arm
    *
@@ -155,8 +159,8 @@ class TemplateAlarmControlPanel final : public alarm_control_panel::AlarmControl
   uint32_t pending_time_;
   // the time in trigger
   uint32_t trigger_time_;
-  // a list of codes
-  std::vector<std::string> codes_;
+  // a list of codes (const char* pointers to string literals in flash)
+  FixedVector<const char *> codes_;
   // requires a code to arm
   bool requires_code_to_arm_ = false;
   bool supports_arm_home_ = false;

esphome/components/template/select/__init__.py

@@ -88,5 +88,5 @@ async def to_code(config):
 
     if CONF_SET_ACTION in config:
         await automation.build_automation(
-            var.get_set_trigger(), [(cg.StringRef, "x")], config[CONF_SET_ACTION]
+            var.get_set_trigger(), [(cg.std_string, "x")], config[CONF_SET_ACTION]
         )

esphome/components/template/select/template_select.cpp

@@ -41,7 +41,7 @@ void TemplateSelect::update() {
 }
 
 void TemplateSelect::control(size_t index) {
-  this->set_trigger_->trigger(StringRef(this->option_at(index)));
+  this->set_trigger_->trigger(std::string(this->option_at(index)));
 
   if (this->optimistic_)
     this->publish_state(index);

esphome/components/template/select/template_select.h

@@ -4,7 +4,6 @@
 #include "esphome/core/automation.h"
 #include "esphome/core/component.h"
 #include "esphome/core/preferences.h"
-#include "esphome/core/string_ref.h"
 #include "esphome/core/template_lambda.h"
 
 namespace esphome::template_ {
@@ -18,7 +17,7 @@ class TemplateSelect final : public select::Select, public PollingComponent {
   void dump_config() override;
   float get_setup_priority() const override { return setup_priority::HARDWARE; }
 
-  Trigger<StringRef> *get_set_trigger() const { return this->set_trigger_; }
+  Trigger<std::string> *get_set_trigger() const { return this->set_trigger_; }
   void set_optimistic(bool optimistic) { this->optimistic_ = optimistic; }
   void set_initial_option_index(size_t initial_option_index) { this->initial_option_index_ = initial_option_index; }
   void set_restore_value(bool restore_value) { this->restore_value_ = restore_value; }
@@ -28,7 +27,7 @@ class TemplateSelect final : public select::Select, public PollingComponent {
   bool optimistic_ = false;
   size_t initial_option_index_{0};
   bool restore_value_ = false;
-  Trigger<StringRef> *set_trigger_ = new Trigger<StringRef>();
+  Trigger<std::string> *set_trigger_ = new Trigger<std::string>();
   TemplateLambda<std::string> f_;
 
   ESPPreferenceObject pref_;

esphome/components/template/text/template_text.cpp

@@ -8,16 +8,23 @@ static const char *const TAG = "template.text";
 void TemplateText::setup() {
   if (this->f_.has_value())
     return;
-  std::string value = this->initial_value_;
-  if (!this->pref_) {
-    ESP_LOGD(TAG, "State from initial: %s", value.c_str());
-  } else {
-    uint32_t key = this->get_preference_hash();
-    key += this->traits.get_min_length() << 2;
-    key += this->traits.get_max_length() << 4;
-    key += fnv1_hash(this->traits.get_pattern_c_str()) << 6;
-    this->pref_->setup(key, value);
+
+  if (this->pref_ == nullptr) {
+    // No restore - use const char* directly, no heap allocation needed
+    if (this->initial_value_ != nullptr && this->initial_value_[0] != '\0') {
+      ESP_LOGD(TAG, "State from initial: %s", this->initial_value_);
+      this->publish_state(this->initial_value_);
+    }
+    return;
   }
+
+  // Need std::string for pref_->setup() to fill from flash
+  std::string value{this->initial_value_ != nullptr ? this->initial_value_ : ""};
+  uint32_t key = this->get_preference_hash();
+  key += this->traits.get_min_length() << 2;
+  key += this->traits.get_max_length() << 4;
+  key += fnv1_hash(this->traits.get_pattern_c_str()) << 6;
+  this->pref_->setup(key, value);
   if (!value.empty())
     this->publish_state(value);
 }

esphome/components/template/text/template_text.h

@@ -70,13 +70,15 @@ class TemplateText final : public text::Text, public PollingComponent {
 
   Trigger<std::string> *get_set_trigger() const { return this->set_trigger_; }
   void set_optimistic(bool optimistic) { this->optimistic_ = optimistic; }
-  void set_initial_value(const std::string &initial_value) { this->initial_value_ = initial_value; }
+  void set_initial_value(const char *initial_value) { this->initial_value_ = initial_value; }
+  /// Prevent accidental use of std::string which would dangle
+  void set_initial_value(const std::string &initial_value) = delete;
   void set_value_saver(TemplateTextSaverBase *restore_value_saver) { this->pref_ = restore_value_saver; }
 
  protected:
   void control(const std::string &value) override;
   bool optimistic_ = false;
-  std::string initial_value_;
+  const char *initial_value_{nullptr};
   Trigger<std::string> *set_trigger_ = new Trigger<std::string>();
   TemplateLambda<std::string> f_{};
 

esphome/components/udp/__init__.py

@@ -108,8 +108,7 @@ async def to_code(config):
         cg.add(var.set_broadcast_port(conf_port[CONF_BROADCAST_PORT]))
     if (listen_address := str(config[CONF_LISTEN_ADDRESS])) != "255.255.255.255":
         cg.add(var.set_listen_address(listen_address))
-    for address in config[CONF_ADDRESSES]:
-        cg.add(var.add_address(str(address)))
+    cg.add(var.set_addresses([str(addr) for addr in config[CONF_ADDRESSES]]))
     if on_receive := config.get(CONF_ON_RECEIVE):
         on_receive = on_receive[0]
         trigger = cg.new_Pvariable(on_receive[CONF_TRIGGER_ID])

esphome/components/udp/udp_component.cpp

@@ -5,8 +5,7 @@
 #include "esphome/components/network/util.h"
 #include "udp_component.h"
 
-namespace esphome {
-namespace udp {
+namespace esphome::udp {
 
 static const char *const TAG = "udp";
 
@@ -95,7 +94,7 @@ void UDPComponent::setup() {
   // 8266 and RP2040 `Duino
   for (const auto &address : this->addresses_) {
     auto ipaddr = IPAddress();
-    ipaddr.fromString(address.c_str());
+    ipaddr.fromString(address);
     this->ipaddrs_.push_back(ipaddr);
   }
   if (this->should_listen_)
@@ -130,8 +129,8 @@ void UDPComponent::dump_config() {
                 "  Listen Port: %u\n"
                 "  Broadcast Port: %u",
                 this->listen_port_, this->broadcast_port_);
-  for (const auto &address : this->addresses_)
-    ESP_LOGCONFIG(TAG, "  Address: %s", address.c_str());
+  for (const char *address : this->addresses_)
+    ESP_LOGCONFIG(TAG, "  Address: %s", address);
   if (this->listen_address_.has_value()) {
     char addr_buf[network::IP_ADDRESS_BUFFER_SIZE];
     ESP_LOGCONFIG(TAG, "  Listen address: %s", this->listen_address_.value().str_to(addr_buf));
@@ -162,7 +161,6 @@ void UDPComponent::send_packet(const uint8_t *data, size_t size) {
   }
 #endif
 }
-}  // namespace udp
-}  // namespace esphome
+}  // namespace esphome::udp
 
 #endif

esphome/components/udp/udp_component.h

@@ -2,6 +2,7 @@
 
 #include "esphome/core/defines.h"
 #ifdef USE_NETWORK
+#include "esphome/core/helpers.h"
 #include "esphome/components/network/ip_address.h"
 #if defined(USE_SOCKET_IMPL_BSD_SOCKETS) || defined(USE_SOCKET_IMPL_LWIP_SOCKETS)
 #include "esphome/components/socket/socket.h"
@@ -9,15 +10,17 @@
 #ifdef USE_SOCKET_IMPL_LWIP_TCP
 #include <WiFiUdp.h>
 #endif
+#include <initializer_list>
 #include <vector>
 
-namespace esphome {
-namespace udp {
+namespace esphome::udp {
 
 static const size_t MAX_PACKET_SIZE = 508;
 class UDPComponent : public Component {
  public:
-  void add_address(const char *addr) { this->addresses_.emplace_back(addr); }
+  void set_addresses(std::initializer_list<const char *> addresses) { this->addresses_ = addresses; }
+  /// Prevent accidental use of std::string which would dangle
+  void set_addresses(std::initializer_list<std::string> addresses) = delete;
   void set_listen_address(const char *listen_addr) { this->listen_address_ = network::IPAddress(listen_addr); }
   void set_listen_port(uint16_t port) { this->listen_port_ = port; }
   void set_broadcast_port(uint16_t port) { this->broadcast_port_ = port; }
@@ -49,11 +52,10 @@ class UDPComponent : public Component {
   std::vector<IPAddress> ipaddrs_{};
   WiFiUDP udp_client_{};
 #endif
-  std::vector<std::string> addresses_{};
+  FixedVector<const char *> addresses_{};
 
   optional<network::IPAddress> listen_address_{};
 };
 
-}  // namespace udp
-}  // namespace esphome
+}  // namespace esphome::udp
 #endif

esphome/components/web_server/list_entities.cpp

@@ -143,7 +143,7 @@ bool ListEntitiesIterator::on_water_heater(water_heater::WaterHeater *obj) {
 
 #ifdef USE_INFRARED
 bool ListEntitiesIterator::on_infrared(infrared::Infrared *obj) {
-  // Infrared web_server support not yet implemented - this stub acknowledges the entity
+  this->events_->deferrable_send_state(obj, "state_detail_all", WebServer::infrared_all_json_generator);
   return true;
 }
 #endif

esphome/components/web_server/web_server.cpp

@@ -33,6 +33,10 @@
 #include "esphome/components/water_heater/water_heater.h"
 #endif
 
+#ifdef USE_INFRARED
+#include "esphome/components/infrared/infrared.h"
+#endif
+
 #ifdef USE_WEBSERVER_LOCAL
 #if USE_WEBSERVER_VERSION == 2
 #include "server_index_v2.h"
@@ -1952,6 +1956,110 @@ std::string WebServer::water_heater_json_(water_heater::WaterHeater *obj, JsonDe
 }
 #endif
 
+#ifdef USE_INFRARED
+void WebServer::handle_infrared_request(AsyncWebServerRequest *request, const UrlMatch &match) {
+  for (infrared::Infrared *obj : App.get_infrareds()) {
+    auto entity_match = match.match_entity(obj);
+    if (!entity_match.matched)
+      continue;
+
+    if (request->method() == HTTP_GET && entity_match.action_is_empty) {
+      auto detail = get_request_detail(request);
+      std::string data = this->infrared_json_(obj, detail);
+      request->send(200, ESPHOME_F("application/json"), data.c_str());
+      return;
+    }
+    if (!match.method_equals(ESPHOME_F("transmit"))) {
+      request->send(404);
+      return;
+    }
+
+    // Only allow transmit if the device supports it
+    if (!obj->has_transmitter()) {
+      request->send(400, ESPHOME_F("text/plain"), "Device does not support transmission");
+      return;
+    }
+
+    // Parse parameters
+    auto call = obj->make_call();
+
+    // Parse carrier frequency (optional)
+    if (request->hasParam(ESPHOME_F("carrier_frequency"))) {
+      auto value = parse_number<uint32_t>(request->getParam(ESPHOME_F("carrier_frequency"))->value().c_str());
+      if (value.has_value()) {
+        call.set_carrier_frequency(*value);
+      }
+    }
+
+    // Parse repeat count (optional, defaults to 1)
+    if (request->hasParam(ESPHOME_F("repeat_count"))) {
+      auto value = parse_number<uint32_t>(request->getParam(ESPHOME_F("repeat_count"))->value().c_str());
+      if (value.has_value()) {
+        call.set_repeat_count(*value);
+      }
+    }
+
+    // Parse base64url-encoded raw timings (required)
+    // Base64url is URL-safe: uses A-Za-z0-9-_ (no special characters needing escaping)
+    if (!request->hasParam(ESPHOME_F("data"))) {
+      request->send(400, ESPHOME_F("text/plain"), "Missing 'data' parameter");
+      return;
+    }
+
+    // .c_str() is required for Arduino framework where value() returns Arduino String instead of std::string
+    std::string encoded =
+        request->getParam(ESPHOME_F("data"))->value().c_str();  // NOLINT(readability-redundant-string-cstr)
+
+    // Validate base64url is not empty
+    if (encoded.empty()) {
+      request->send(400, ESPHOME_F("text/plain"), "Empty 'data' parameter");
+      return;
+    }
+
+#ifdef USE_ESP8266
+    // ESP8266 is single-threaded, call directly
+    call.set_raw_timings_base64url(encoded);
+    call.perform();
+#else
+    // Defer to main loop for thread safety. Move encoded string into lambda to ensure
+    // it outlives the call - set_raw_timings_base64url stores a pointer, so the string
+    // must remain valid until perform() completes.
+    this->defer([call, encoded = std::move(encoded)]() mutable {
+      call.set_raw_timings_base64url(encoded);
+      call.perform();
+    });
+#endif
+
+    request->send(200);
+    return;
+  }
+  request->send(404);
+}
+
+std::string WebServer::infrared_all_json_generator(WebServer *web_server, void *source) {
+  // NOLINTNEXTLINE(clang-analyzer-cplusplus.NewDeleteLeaks) false positive with ArduinoJson
+  return web_server->infrared_json_(static_cast<infrared::Infrared *>(source), DETAIL_ALL);
+}
+
+std::string WebServer::infrared_json_(infrared::Infrared *obj, JsonDetail start_config) {
+  json::JsonBuilder builder;
+  JsonObject root = builder.root();
+
+  set_json_icon_state_value(root, obj, "infrared", "", 0, start_config);
+
+  auto traits = obj->get_traits();
+
+  root[ESPHOME_F("supports_transmitter")] = traits.get_supports_transmitter();
+  root[ESPHOME_F("supports_receiver")] = traits.get_supports_receiver();
+
+  if (start_config == DETAIL_ALL) {
+    this->add_sorting_info_(root, obj);
+  }
+
+  return builder.serialize();
+}
+#endif
+
 #ifdef USE_EVENT
 void WebServer::on_event(event::Event *obj) {
   if (!this->include_internal_ && obj->is_internal())
@@ -2083,24 +2191,21 @@ bool WebServer::canHandle(AsyncWebServerRequest *request) const {
   const auto &url = request->url();
   const auto method = request->method();
 
-  // Static URL checks
-  static const char *const STATIC_URLS[] = {
-    "/",
+  // Static URL checks - use ESPHOME_F to keep strings in flash on ESP8266
+  if (url == ESPHOME_F("/"))
+    return true;
 #if !defined(USE_ESP32) && defined(USE_ARDUINO)
-    "/events",
+  if (url == ESPHOME_F("/events"))
+    return true;
 #endif
 #ifdef USE_WEBSERVER_CSS_INCLUDE
-    "/0.css",
+  if (url == ESPHOME_F("/0.css"))
+    return true;
 #endif
 #ifdef USE_WEBSERVER_JS_INCLUDE
-    "/0.js",
+  if (url == ESPHOME_F("/0.js"))
+    return true;
 #endif
-  };
-
-  for (const auto &static_url : STATIC_URLS) {
-    if (url == static_url)
-      return true;
-  }
 
 #ifdef USE_WEBSERVER_PRIVATE_NETWORK_ACCESS
   if (method == HTTP_OPTIONS && request->hasHeader(ESPHOME_F("Access-Control-Request-Private-Network")))
@@ -2120,90 +2225,100 @@ bool WebServer::canHandle(AsyncWebServerRequest *request) const {
   if (!is_get_or_post)
     return false;
 
-  // Use lookup tables for domain checks
-  static const char *const GET_ONLY_DOMAINS[] = {
+  // Check GET-only domains - use ESPHOME_F to keep strings in flash on ESP8266
+  if (is_get) {
 #ifdef USE_SENSOR
-      "sensor",
+    if (match.domain_equals(ESPHOME_F("sensor")))
+      return true;
 #endif
 #ifdef USE_BINARY_SENSOR
-      "binary_sensor",
+    if (match.domain_equals(ESPHOME_F("binary_sensor")))
+      return true;
 #endif
 #ifdef USE_TEXT_SENSOR
-      "text_sensor",
+    if (match.domain_equals(ESPHOME_F("text_sensor")))
+      return true;
 #endif
 #ifdef USE_EVENT
-      "event",
+    if (match.domain_equals(ESPHOME_F("event")))
+      return true;
 #endif
-  };
-
-  static const char *const GET_POST_DOMAINS[] = {
-#ifdef USE_SWITCH
-      "switch",
-#endif
-#ifdef USE_BUTTON
-      "button",
-#endif
-#ifdef USE_FAN
-      "fan",
-#endif
-#ifdef USE_LIGHT
-      "light",
-#endif
-#ifdef USE_COVER
-      "cover",
-#endif
-#ifdef USE_NUMBER
-      "number",
-#endif
-#ifdef USE_DATETIME_DATE
-      "date",
-#endif
-#ifdef USE_DATETIME_TIME
-      "time",
-#endif
-#ifdef USE_DATETIME_DATETIME
-      "datetime",
-#endif
-#ifdef USE_TEXT
-      "text",
-#endif
-#ifdef USE_SELECT
-      "select",
-#endif
-#ifdef USE_CLIMATE
-      "climate",
-#endif
-#ifdef USE_LOCK
-      "lock",
-#endif
-#ifdef USE_VALVE
-      "valve",
-#endif
-#ifdef USE_ALARM_CONTROL_PANEL
-      "alarm_control_panel",
-#endif
-#ifdef USE_UPDATE
-      "update",
-#endif
-#ifdef USE_WATER_HEATER
-      "water_heater",
-#endif
-  };
-
-  // Check GET-only domains
-  if (is_get) {
-    for (const auto &domain : GET_ONLY_DOMAINS) {
-      if (match.domain_equals(domain))
-        return true;
-    }
   }
 
   // Check GET+POST domains
   if (is_get_or_post) {
-    for (const auto &domain : GET_POST_DOMAINS) {
-      if (match.domain_equals(domain))
-        return true;
-    }
+#ifdef USE_SWITCH
+    if (match.domain_equals(ESPHOME_F("switch")))
+      return true;
+#endif
+#ifdef USE_BUTTON
+    if (match.domain_equals(ESPHOME_F("button")))
+      return true;
+#endif
+#ifdef USE_FAN
+    if (match.domain_equals(ESPHOME_F("fan")))
+      return true;
+#endif
+#ifdef USE_LIGHT
+    if (match.domain_equals(ESPHOME_F("light")))
+      return true;
+#endif
+#ifdef USE_COVER
+    if (match.domain_equals(ESPHOME_F("cover")))
+      return true;
+#endif
+#ifdef USE_NUMBER
+    if (match.domain_equals(ESPHOME_F("number")))
+      return true;
+#endif
+#ifdef USE_DATETIME_DATE
+    if (match.domain_equals(ESPHOME_F("date")))
+      return true;
+#endif
+#ifdef USE_DATETIME_TIME
+    if (match.domain_equals(ESPHOME_F("time")))
+      return true;
+#endif
+#ifdef USE_DATETIME_DATETIME
+    if (match.domain_equals(ESPHOME_F("datetime")))
+      return true;
+#endif
+#ifdef USE_TEXT
+    if (match.domain_equals(ESPHOME_F("text")))
+      return true;
+#endif
+#ifdef USE_SELECT
+    if (match.domain_equals(ESPHOME_F("select")))
+      return true;
+#endif
+#ifdef USE_CLIMATE
+    if (match.domain_equals(ESPHOME_F("climate")))
+      return true;
+#endif
+#ifdef USE_LOCK
+    if (match.domain_equals(ESPHOME_F("lock")))
+      return true;
+#endif
+#ifdef USE_VALVE
+    if (match.domain_equals(ESPHOME_F("valve")))
+      return true;
+#endif
+#ifdef USE_ALARM_CONTROL_PANEL
+    if (match.domain_equals(ESPHOME_F("alarm_control_panel")))
+      return true;
+#endif
+#ifdef USE_UPDATE
+    if (match.domain_equals(ESPHOME_F("update")))
+      return true;
+#endif
+#ifdef USE_WATER_HEATER
+    if (match.domain_equals(ESPHOME_F("water_heater")))
+      return true;
+#endif
+#ifdef USE_INFRARED
+    if (match.domain_equals(ESPHOME_F("infrared")))
+      return true;
+#endif
   }
 
   return false;
@@ -2352,6 +2467,11 @@ void WebServer::handleRequest(AsyncWebServerRequest *request) {
   else if (match.domain_equals(ESPHOME_F("water_heater"))) {
     this->handle_water_heater_request(request, match);
   }
+#endif
+#ifdef USE_INFRARED
+  else if (match.domain_equals(ESPHOME_F("infrared"))) {
+    this->handle_infrared_request(request, match);
+  }
 #endif
   else {
     // No matching handler found - send 404

esphome/components/web_server/web_server.h

@@ -460,6 +460,13 @@ class WebServer : public Controller,
   static std::string water_heater_all_json_generator(WebServer *web_server, void *source);
 #endif
 
+#ifdef USE_INFRARED
+  /// Handle an infrared request under '/infrared/<id>/transmit'.
+  void handle_infrared_request(AsyncWebServerRequest *request, const UrlMatch &match);
+
+  static std::string infrared_all_json_generator(WebServer *web_server, void *source);
+#endif
+
 #ifdef USE_EVENT
   void on_event(event::Event *obj) override;
 
@@ -662,6 +669,9 @@ class WebServer : public Controller,
 #ifdef USE_WATER_HEATER
   std::string water_heater_json_(water_heater::WaterHeater *obj, JsonDetail start_config);
 #endif
+#ifdef USE_INFRARED
+  std::string infrared_json_(infrared::Infrared *obj, JsonDetail start_config);
+#endif
 #ifdef USE_UPDATE
   std::string update_json_(update::UpdateEntity *obj, JsonDetail start_config);
 #endif

esphome/components/weikai/weikai.cpp

@@ -4,19 +4,13 @@
 /// @details The classes declared in this file can be used by the Weikai family
 
 #include "weikai.h"
+#include "esphome/core/helpers.h"
 
 namespace esphome {
 namespace weikai {
 
 static const char *const TAG = "weikai";
 
-/// @brief convert an int to binary representation as C++ std::string
-/// @param val integer to convert
-/// @return a std::string
-inline std::string i2s(uint8_t val) { return std::bitset<8>(val).to_string(); }
-/// Convert std::string to C string
-#define I2S2CS(val) (i2s(val).c_str())
-
 /// @brief measure the time elapsed between two calls
 /// @param last_time time of the previous call
 /// @return the elapsed time in milliseconds
@@ -170,17 +164,18 @@ void WeikaiComponent::test_gpio_input_() {
   static bool init_input{false};
   static uint8_t state{0};
   uint8_t value;
+  char bin_buf[9];  // 8 binary digits + null
   if (!init_input) {
     init_input = true;
     // set all pins in input mode
     this->reg(WKREG_GPDIR, 0) = 0x00;
     ESP_LOGI(TAG, "initializing all pins to input mode");
     state = this->reg(WKREG_GPDAT, 0);
-    ESP_LOGI(TAG, "initial input data state = %02X (%s)", state, I2S2CS(state));
+    ESP_LOGI(TAG, "initial input data state = %02X (%s)", state, format_bin_to(bin_buf, state));
   }
   value = this->reg(WKREG_GPDAT, 0);
   if (value != state) {
-    ESP_LOGI(TAG, "Input data changed from %02X to %02X (%s)", state, value, I2S2CS(value));
+    ESP_LOGI(TAG, "Input data changed from %02X to %02X (%s)", state, value, format_bin_to(bin_buf, value));
     state = value;
   }
 }
@@ -188,6 +183,7 @@ void WeikaiComponent::test_gpio_input_() {
 void WeikaiComponent::test_gpio_output_() {
   static bool init_output{false};
   static uint8_t state{0};
+  char bin_buf[9];  // 8 binary digits + null
   if (!init_output) {
     init_output = true;
     // set all pins in output mode
@@ -198,7 +194,7 @@ void WeikaiComponent::test_gpio_output_() {
   }
   state = ~state;
   this->reg(WKREG_GPDAT, 0) = state;
-  ESP_LOGI(TAG, "Flipping all outputs to %02X (%s)", state, I2S2CS(state));
+  ESP_LOGI(TAG, "Flipping all outputs to %02X (%s)", state, format_bin_to(bin_buf, state));
   delay(100);  // NOLINT
 }
 #endif
@@ -208,7 +204,9 @@ void WeikaiComponent::test_gpio_output_() {
 ///////////////////////////////////////////////////////////////////////////////
 bool WeikaiComponent::read_pin_val_(uint8_t pin) {
   this->input_state_ = this->reg(WKREG_GPDAT, 0);
-  ESP_LOGVV(TAG, "reading input pin %u = %u in_state %s", pin, this->input_state_ & (1 << pin), I2S2CS(input_state_));
+  char bin_buf[9];
+  ESP_LOGVV(TAG, "reading input pin %u = %u in_state %s", pin, this->input_state_ & (1 << pin),
+            format_bin_to(bin_buf, this->input_state_));
   return this->input_state_ & (1 << pin);
 }
 
@@ -218,7 +216,9 @@ void WeikaiComponent::write_pin_val_(uint8_t pin, bool value) {
   } else {
     this->output_state_ &= ~(1 << pin);
   }
-  ESP_LOGVV(TAG, "writing output pin %d with %d out_state %s", pin, uint8_t(value), I2S2CS(this->output_state_));
+  char bin_buf[9];
+  ESP_LOGVV(TAG, "writing output pin %d with %d out_state %s", pin, uint8_t(value),
+            format_bin_to(bin_buf, this->output_state_));
   this->reg(WKREG_GPDAT, 0) = this->output_state_;
 }
 
@@ -232,7 +232,8 @@ void WeikaiComponent::set_pin_direction_(uint8_t pin, gpio::Flags flags) {
       ESP_LOGE(TAG, "pin %d direction invalid", pin);
     }
   }
-  ESP_LOGVV(TAG, "setting pin %d direction to %d pin_config=%s", pin, flags, I2S2CS(this->pin_config_));
+  char bin_buf[9];
+  ESP_LOGVV(TAG, "setting pin %d direction to %d pin_config=%s", pin, flags, format_bin_to(bin_buf, this->pin_config_));
   this->reg(WKREG_GPDIR, 0) = this->pin_config_;  // TODO check ~
 }
 
@@ -241,7 +242,6 @@ void WeikaiGPIOPin::setup() {
                 flags_ == gpio::FLAG_INPUT          ? "Input"
                 : this->flags_ == gpio::FLAG_OUTPUT ? "Output"
                                                     : "NOT SPECIFIED");
-  // ESP_LOGCONFIG(TAG, "Setting GPIO pins mode to '%s' %02X", I2S2CS(this->flags_), this->flags_);
   this->pin_mode(this->flags_);
 }
 
@@ -297,8 +297,9 @@ void WeikaiChannel::set_line_param_() {
       break;  // no parity 000x
   }
   this->reg(WKREG_LCR) = lcr;  // write LCR
+  char bin_buf[9];
   ESP_LOGV(TAG, "    line config: %d data_bits, %d stop_bits, parity %s register [%s]", this->data_bits_,
-           this->stop_bits_, p2s(this->parity_), I2S2CS(lcr));
+           this->stop_bits_, p2s(this->parity_), format_bin_to(bin_buf, lcr));
 }
 
 void WeikaiChannel::set_baudrate_() {
@@ -334,7 +335,8 @@ size_t WeikaiChannel::tx_in_fifo_() {
   if (tfcnt == 0) {
     uint8_t const fsr = this->reg(WKREG_FSR);
     if (fsr & FSR_TFFULL) {
-      ESP_LOGVV(TAG, "tx FIFO full FSR=%s", I2S2CS(fsr));
+      char bin_buf[9];
+      ESP_LOGVV(TAG, "tx FIFO full FSR=%s", format_bin_to(bin_buf, fsr));
       tfcnt = FIFO_SIZE;
     }
   }
@@ -346,14 +348,15 @@ size_t WeikaiChannel::rx_in_fifo_() {
   size_t available = this->reg(WKREG_RFCNT);
   uint8_t const fsr = this->reg(WKREG_FSR);
   if (fsr & (FSR_RFOE | FSR_RFLB | FSR_RFFE | FSR_RFPE)) {
+    char bin_buf[9];
     if (fsr & FSR_RFOE)
-      ESP_LOGE(TAG, "Receive data overflow FSR=%s", I2S2CS(fsr));
+      ESP_LOGE(TAG, "Receive data overflow FSR=%s", format_bin_to(bin_buf, fsr));
     if (fsr & FSR_RFLB)
-      ESP_LOGE(TAG, "Receive line break FSR=%s", I2S2CS(fsr));
+      ESP_LOGE(TAG, "Receive line break FSR=%s", format_bin_to(bin_buf, fsr));
     if (fsr & FSR_RFFE)
-      ESP_LOGE(TAG, "Receive frame error FSR=%s", I2S2CS(fsr));
+      ESP_LOGE(TAG, "Receive frame error FSR=%s", format_bin_to(bin_buf, fsr));
     if (fsr & FSR_RFPE)
-      ESP_LOGE(TAG, "Receive parity error FSR=%s", I2S2CS(fsr));
+      ESP_LOGE(TAG, "Receive parity error FSR=%s", format_bin_to(bin_buf, fsr));
   }
   if ((available == 0) && (fsr & FSR_RFDAT)) {
     // here we should be very careful because we can have something like this:
@@ -362,11 +365,13 @@ size_t WeikaiChannel::rx_in_fifo_() {
     // -  so to be sure we need to do another read of RFCNT and if it is still zero -> buffer full
     available = this->reg(WKREG_RFCNT);
     if (available == 0) {  // still zero ?
-      ESP_LOGV(TAG, "rx FIFO is full FSR=%s", I2S2CS(fsr));
+      char bin_buf[9];
+      ESP_LOGV(TAG, "rx FIFO is full FSR=%s", format_bin_to(bin_buf, fsr));
       available = FIFO_SIZE;
     }
   }
-  ESP_LOGVV(TAG, "rx FIFO contain %d bytes - FSR status=%s", available, I2S2CS(fsr));
+  char bin_buf2[9];
+  ESP_LOGVV(TAG, "rx FIFO contain %d bytes - FSR status=%s", available, format_bin_to(bin_buf2, fsr));
   return available;
 }
 

esphome/components/weikai/weikai.h

@@ -8,7 +8,6 @@
 ///                 wk2132_i2c, wk2168_i2c, wk2204_i2c, wk2212_i2c
 
 #pragma once
-#include <bitset>
 #include <memory>
 #include <cinttypes>
 #include "esphome/core/component.h"

esphome/components/weikai_spi/weikai_spi.cpp

@@ -10,13 +10,6 @@ namespace weikai_spi {
 using namespace weikai;
 static const char *const TAG = "weikai_spi";
 
-/// @brief convert an int to binary representation as C++ std::string
-/// @param val integer to convert
-/// @return a std::string
-inline std::string i2s(uint8_t val) { return std::bitset<8>(val).to_string(); }
-/// Convert std::string to C string
-#define I2S2CS(val) (i2s(val).c_str())
-
 /// @brief measure the time elapsed between two calls
 /// @param last_time time of the previous call
 /// @return the elapsed time in microseconds
@@ -107,7 +100,8 @@ uint8_t WeikaiRegisterSPI::read_reg() const {
   spi_comp->write_byte(cmd);
   uint8_t val = spi_comp->read_byte();
   spi_comp->disable();
-  ESP_LOGVV(TAG, "WeikaiRegisterSPI::read_reg() cmd=%s(%02X) reg=%s ch=%d buf=%02X", I2S2CS(cmd), cmd,
+  char bin_buf[9];
+  ESP_LOGVV(TAG, "WeikaiRegisterSPI::read_reg() cmd=%s(%02X) reg=%s ch=%d buf=%02X", format_bin_to(bin_buf, cmd), cmd,
             reg_to_str(this->register_, this->comp_->page1()), this->channel_, val);
   return val;
 }
@@ -120,8 +114,9 @@ void WeikaiRegisterSPI::read_fifo(uint8_t *data, size_t length) const {
   spi_comp->read_array(data, length);
   spi_comp->disable();
 #ifdef ESPHOME_LOG_HAS_VERY_VERBOSE
-  ESP_LOGVV(TAG, "WeikaiRegisterSPI::read_fifo() cmd=%s(%02X) ch=%d len=%d buffer", I2S2CS(cmd), cmd, this->channel_,
-            length);
+  char bin_buf[9];
+  ESP_LOGVV(TAG, "WeikaiRegisterSPI::read_fifo() cmd=%s(%02X) ch=%d len=%d buffer", format_bin_to(bin_buf, cmd), cmd,
+            this->channel_, length);
   print_buffer(data, length);
 #endif
 }
@@ -132,8 +127,9 @@ void WeikaiRegisterSPI::write_reg(uint8_t value) {
   spi_comp->enable();
   spi_comp->write_array(buf, 2);
   spi_comp->disable();
-  ESP_LOGVV(TAG, "WeikaiRegisterSPI::write_reg() cmd=%s(%02X) reg=%s ch=%d buf=%02X", I2S2CS(buf[0]), buf[0],
-            reg_to_str(this->register_, this->comp_->page1()), this->channel_, buf[1]);
+  char bin_buf[9];
+  ESP_LOGVV(TAG, "WeikaiRegisterSPI::write_reg() cmd=%s(%02X) reg=%s ch=%d buf=%02X", format_bin_to(bin_buf, buf[0]),
+            buf[0], reg_to_str(this->register_, this->comp_->page1()), this->channel_, buf[1]);
 }
 
 void WeikaiRegisterSPI::write_fifo(uint8_t *data, size_t length) {
@@ -145,8 +141,9 @@ void WeikaiRegisterSPI::write_fifo(uint8_t *data, size_t length) {
   spi_comp->disable();
 
 #ifdef ESPHOME_LOG_HAS_VERY_VERBOSE
-  ESP_LOGVV(TAG, "WeikaiRegisterSPI::write_fifo() cmd=%s(%02X) ch=%d len=%d buffer", I2S2CS(cmd), cmd, this->channel_,
-            length);
+  char bin_buf[9];
+  ESP_LOGVV(TAG, "WeikaiRegisterSPI::write_fifo() cmd=%s(%02X) ch=%d len=%d buffer", format_bin_to(bin_buf, cmd), cmd,
+            this->channel_, length);
   print_buffer(data, length);
 #endif
 }

esphome/components/weikai_spi/weikai_spi.h

@@ -6,7 +6,6 @@
 ///          wk2124_spi, wk2132_spi, wk2168_spi, wk2204_spi, wk2212_spi,
 
 #pragma once
-#include <bitset>
 #include <memory>
 #include "esphome/core/component.h"
 #include "esphome/components/uart/uart.h"

esphome/components/wireguard/__init__.py

@@ -30,6 +30,7 @@ _WG_KEY_REGEX = re.compile(r"^[A-Za-z0-9+/]{42}[AEIMQUYcgkosw480]=$")
 
 wireguard_ns = cg.esphome_ns.namespace("wireguard")
 Wireguard = wireguard_ns.class_("Wireguard", cg.Component, cg.PollingComponent)
+AllowedIP = wireguard_ns.struct("AllowedIP")
 WireguardPeerOnlineCondition = wireguard_ns.class_(
     "WireguardPeerOnlineCondition", automation.Condition
 )
@@ -108,8 +109,18 @@ async def to_code(config):
         )
     )
 
-    for ip in allowed_ips:
-        cg.add(var.add_allowed_ip(str(ip.network_address), str(ip.netmask)))
+    cg.add(
+        var.set_allowed_ips(
+            [
+                cg.StructInitializer(
+                    AllowedIP,
+                    ("ip", str(ip.network_address)),
+                    ("netmask", str(ip.netmask)),
+                )
+                for ip in allowed_ips
+            ]
+        )
+    )
 
     cg.add(var.set_srctime(await cg.get_variable(config[CONF_TIME_ID])))
 

esphome/components/wireguard/wireguard.cpp

@@ -13,8 +13,7 @@
 #include <esp_wireguard.h>
 #include <esp_wireguard_err.h>
 
-namespace esphome {
-namespace wireguard {
+namespace esphome::wireguard {
 
 static const char *const TAG = "wireguard";
 
@@ -28,16 +27,16 @@ static const char *const LOGMSG_ONLINE = "online";
 static const char *const LOGMSG_OFFLINE = "offline";
 
 void Wireguard::setup() {
-  this->wg_config_.address = this->address_.c_str();
-  this->wg_config_.private_key = this->private_key_.c_str();
-  this->wg_config_.endpoint = this->peer_endpoint_.c_str();
-  this->wg_config_.public_key = this->peer_public_key_.c_str();
+  this->wg_config_.address = this->address_;
+  this->wg_config_.private_key = this->private_key_;
+  this->wg_config_.endpoint = this->peer_endpoint_;
+  this->wg_config_.public_key = this->peer_public_key_;
   this->wg_config_.port = this->peer_port_;
-  this->wg_config_.netmask = this->netmask_.c_str();
+  this->wg_config_.netmask = this->netmask_;
   this->wg_config_.persistent_keepalive = this->keepalive_;
 
-  if (!this->preshared_key_.empty())
-    this->wg_config_.preshared_key = this->preshared_key_.c_str();
+  if (this->preshared_key_ != nullptr)
+    this->wg_config_.preshared_key = this->preshared_key_;
 
   this->publish_enabled_state();
 
@@ -131,6 +130,10 @@ void Wireguard::update() {
 }
 
 void Wireguard::dump_config() {
+  char private_key_masked[MASK_KEY_BUFFER_SIZE];
+  char preshared_key_masked[MASK_KEY_BUFFER_SIZE];
+  mask_key_to(private_key_masked, sizeof(private_key_masked), this->private_key_);
+  mask_key_to(preshared_key_masked, sizeof(preshared_key_masked), this->preshared_key_);
   // clang-format off
   ESP_LOGCONFIG(
       TAG,
@@ -142,13 +145,13 @@ void Wireguard::dump_config() {
       "  Peer Port: " LOG_SECRET("%d") "\n"
       "  Peer Public Key: " LOG_SECRET("%s") "\n"
       "  Peer Pre-shared Key: " LOG_SECRET("%s"),
-      this->address_.c_str(), this->netmask_.c_str(), mask_key(this->private_key_).c_str(),
-      this->peer_endpoint_.c_str(), this->peer_port_, this->peer_public_key_.c_str(),
-      (!this->preshared_key_.empty() ? mask_key(this->preshared_key_).c_str() : "NOT IN USE"));
+      this->address_, this->netmask_, private_key_masked,
+      this->peer_endpoint_, this->peer_port_, this->peer_public_key_,
+      (this->preshared_key_ != nullptr ? preshared_key_masked : "NOT IN USE"));
   // clang-format on
   ESP_LOGCONFIG(TAG, "  Peer Allowed IPs:");
-  for (auto &allowed_ip : this->allowed_ips_) {
-    ESP_LOGCONFIG(TAG, "    - %s/%s", std::get<0>(allowed_ip).c_str(), std::get<1>(allowed_ip).c_str());
+  for (const AllowedIP &allowed_ip : this->allowed_ips_) {
+    ESP_LOGCONFIG(TAG, "    - %s/%s", allowed_ip.ip, allowed_ip.netmask);
   }
   ESP_LOGCONFIG(TAG, "  Peer Persistent Keepalive: %d%s", this->keepalive_,
                 (this->keepalive_ > 0 ? "s" : " (DISABLED)"));
@@ -176,18 +179,6 @@ time_t Wireguard::get_latest_handshake() const {
   return result;
 }
 
-void Wireguard::set_address(const std::string &address) { this->address_ = address; }
-void Wireguard::set_netmask(const std::string &netmask) { this->netmask_ = netmask; }
-void Wireguard::set_private_key(const std::string &key) { this->private_key_ = key; }
-void Wireguard::set_peer_endpoint(const std::string &endpoint) { this->peer_endpoint_ = endpoint; }
-void Wireguard::set_peer_public_key(const std::string &key) { this->peer_public_key_ = key; }
-void Wireguard::set_peer_port(const uint16_t port) { this->peer_port_ = port; }
-void Wireguard::set_preshared_key(const std::string &key) { this->preshared_key_ = key; }
-
-void Wireguard::add_allowed_ip(const std::string &ip, const std::string &netmask) {
-  this->allowed_ips_.emplace_back(ip, netmask);
-}
-
 void Wireguard::set_keepalive(const uint16_t seconds) { this->keepalive_ = seconds; }
 void Wireguard::set_reboot_timeout(const uint32_t seconds) { this->reboot_timeout_ = seconds; }
 void Wireguard::set_srctime(time::RealTimeClock *srctime) { this->srctime_ = srctime; }
@@ -274,9 +265,8 @@ void Wireguard::start_connection_() {
 
   ESP_LOGD(TAG, "Configuring allowed IPs list");
   bool allowed_ips_ok = true;
-  for (std::tuple<std::string, std::string> ip : this->allowed_ips_) {
-    allowed_ips_ok &=
-        (esp_wireguard_add_allowed_ip(&(this->wg_ctx_), std::get<0>(ip).c_str(), std::get<1>(ip).c_str()) == ESP_OK);
+  for (const AllowedIP &ip : this->allowed_ips_) {
+    allowed_ips_ok &= (esp_wireguard_add_allowed_ip(&(this->wg_ctx_), ip.ip, ip.netmask) == ESP_OK);
   }
 
   if (allowed_ips_ok) {
@@ -299,8 +289,25 @@ void Wireguard::stop_connection_() {
   }
 }
 
-std::string mask_key(const std::string &key) { return (key.substr(0, 5) + "[...]="); }
+void mask_key_to(char *buffer, size_t len, const char *key) {
+  // Format: "XXXXX[...]=\0" = MASK_KEY_BUFFER_SIZE chars minimum
+  if (len < MASK_KEY_BUFFER_SIZE || key == nullptr) {
+    if (len > 0)
+      buffer[0] = '\0';
+    return;
+  }
+  // Copy first 5 characters of the key
+  size_t i = 0;
+  for (; i < 5 && key[i] != '\0'; ++i) {
+    buffer[i] = key[i];
+  }
+  // Append "[...]="
+  const char *suffix = "[...]=";
+  for (size_t j = 0; suffix[j] != '\0' && (i + j) < len - 1; ++j) {
+    buffer[i + j] = suffix[j];
+  }
+  buffer[i + 6] = '\0';
+}
 
-}  // namespace wireguard
-}  // namespace esphome
+}  // namespace esphome::wireguard
 #endif

esphome/components/wireguard/wireguard.h

@@ -2,10 +2,10 @@
 #include "esphome/core/defines.h"
 #ifdef USE_WIREGUARD
 #include <ctime>
-#include <vector>
-#include <tuple>
+#include <initializer_list>
 
 #include "esphome/core/component.h"
+#include "esphome/core/helpers.h"
 #include "esphome/components/time/real_time_clock.h"
 
 #ifdef USE_BINARY_SENSOR
@@ -22,8 +22,13 @@
 
 #include <esp_wireguard.h>
 
-namespace esphome {
-namespace wireguard {
+namespace esphome::wireguard {
+
+/// Allowed IP entry for WireGuard peer configuration.
+struct AllowedIP {
+  const char *ip;
+  const char *netmask;
+};
 
 /// Main Wireguard component class.
 class Wireguard : public PollingComponent {
@@ -37,15 +42,25 @@ class Wireguard : public PollingComponent {
 
   float get_setup_priority() const override { return esphome::setup_priority::BEFORE_CONNECTION; }
 
-  void set_address(const std::string &address);
-  void set_netmask(const std::string &netmask);
-  void set_private_key(const std::string &key);
-  void set_peer_endpoint(const std::string &endpoint);
-  void set_peer_public_key(const std::string &key);
-  void set_peer_port(uint16_t port);
-  void set_preshared_key(const std::string &key);
+  void set_address(const char *address) { this->address_ = address; }
+  void set_netmask(const char *netmask) { this->netmask_ = netmask; }
+  void set_private_key(const char *key) { this->private_key_ = key; }
+  void set_peer_endpoint(const char *endpoint) { this->peer_endpoint_ = endpoint; }
+  void set_peer_public_key(const char *key) { this->peer_public_key_ = key; }
+  void set_peer_port(uint16_t port) { this->peer_port_ = port; }
+  void set_preshared_key(const char *key) { this->preshared_key_ = key; }
 
-  void add_allowed_ip(const std::string &ip, const std::string &netmask);
+  /// Prevent accidental use of std::string which would dangle
+  void set_address(const std::string &address) = delete;
+  void set_netmask(const std::string &netmask) = delete;
+  void set_private_key(const std::string &key) = delete;
+  void set_peer_endpoint(const std::string &endpoint) = delete;
+  void set_peer_public_key(const std::string &key) = delete;
+  void set_preshared_key(const std::string &key) = delete;
+
+  void set_allowed_ips(std::initializer_list<AllowedIP> ips) { this->allowed_ips_ = ips; }
+  /// Prevent accidental use of std::string which would dangle
+  void set_allowed_ips(std::initializer_list<std::tuple<std::string, std::string>> ips) = delete;
 
   void set_keepalive(uint16_t seconds);
   void set_reboot_timeout(uint32_t seconds);
@@ -83,14 +98,14 @@ class Wireguard : public PollingComponent {
   time_t get_latest_handshake() const;
 
  protected:
-  std::string address_;
-  std::string netmask_;
-  std::string private_key_;
-  std::string peer_endpoint_;
-  std::string peer_public_key_;
-  std::string preshared_key_;
+  const char *address_{nullptr};
+  const char *netmask_{nullptr};
+  const char *private_key_{nullptr};
+  const char *peer_endpoint_{nullptr};
+  const char *peer_public_key_{nullptr};
+  const char *preshared_key_{nullptr};
 
-  std::vector<std::tuple<std::string, std::string>> allowed_ips_;
+  FixedVector<AllowedIP> allowed_ips_;
 
   uint16_t peer_port_;
   uint16_t keepalive_;
@@ -142,8 +157,11 @@ class Wireguard : public PollingComponent {
 void suspend_wdt();
 void resume_wdt();
 
+/// Size of buffer required for mask_key_to: 5 chars + "[...]=" + null = 12
+static constexpr size_t MASK_KEY_BUFFER_SIZE = 12;
+
 /// Strip most part of the key only for secure printing
-std::string mask_key(const std::string &key);
+void mask_key_to(char *buffer, size_t len, const char *key);
 
 /// Condition to check if remote peer is online.
 template<typename... Ts> class WireguardPeerOnlineCondition : public Condition<Ts...>, public Parented<Wireguard> {
@@ -169,6 +187,5 @@ template<typename... Ts> class WireguardDisableAction : public Action<Ts...>, pu
   void play(const Ts &...x) override { this->parent_->disable(); }
 };
 
-}  // namespace wireguard
-}  // namespace esphome
+}  // namespace esphome::wireguard
 #endif

esphome/core/helpers.cpp

@@ -404,15 +404,31 @@ std::string format_hex_pretty(const std::string &data, char separator, bool show
   return format_hex_pretty_uint8(reinterpret_cast<const uint8_t *>(data.data()), data.length(), separator, show_length);
 }
 
+char *format_bin_to(char *buffer, size_t buffer_size, const uint8_t *data, size_t length) {
+  if (buffer_size == 0) {
+    return buffer;
+  }
+  // Calculate max bytes we can format: each byte needs 8 chars
+  size_t max_bytes = (buffer_size - 1) / 8;
+  if (max_bytes == 0 || length == 0) {
+    buffer[0] = '\0';
+    return buffer;
+  }
+  size_t bytes_to_format = std::min(length, max_bytes);
+
+  for (size_t byte_idx = 0; byte_idx < bytes_to_format; byte_idx++) {
+    for (size_t bit_idx = 0; bit_idx < 8; bit_idx++) {
+      buffer[byte_idx * 8 + bit_idx] = ((data[byte_idx] >> (7 - bit_idx)) & 1) + '0';
+    }
+  }
+  buffer[bytes_to_format * 8] = '\0';
+  return buffer;
+}
+
 std::string format_bin(const uint8_t *data, size_t length) {
   std::string result;
   result.resize(length * 8);
-  for (size_t byte_idx = 0; byte_idx < length; byte_idx++) {
-    for (size_t bit_idx = 0; bit_idx < 8; bit_idx++) {
-      result[byte_idx * 8 + bit_idx] = ((data[byte_idx] >> (7 - bit_idx)) & 1) + '0';
-    }
-  }
-
+  format_bin_to(&result[0], length * 8 + 1, data, length);
   return result;
 }
 

esphome/core/helpers.h

@@ -395,6 +395,28 @@ constexpr uint32_t FNV1_OFFSET_BASIS = 2166136261UL;
 /// FNV-1 32-bit prime
 constexpr uint32_t FNV1_PRIME = 16777619UL;
 
+/// Extend a FNV-1 hash with an integer (hashes each byte).
+template<std::integral T> constexpr uint32_t fnv1_hash_extend(uint32_t hash, T value) {
+  using UnsignedT = std::make_unsigned_t<T>;
+  UnsignedT uvalue = static_cast<UnsignedT>(value);
+  for (size_t i = 0; i < sizeof(T); i++) {
+    hash *= FNV1_PRIME;
+    hash ^= (uvalue >> (i * 8)) & 0xFF;
+  }
+  return hash;
+}
+/// Extend a FNV-1 hash with additional string data.
+constexpr uint32_t fnv1_hash_extend(uint32_t hash, const char *str) {
+  if (str) {
+    while (*str) {
+      hash *= FNV1_PRIME;
+      hash ^= *str++;
+    }
+  }
+  return hash;
+}
+inline uint32_t fnv1_hash_extend(uint32_t hash, const std::string &str) { return fnv1_hash_extend(hash, str.c_str()); }
+
 /// Extend a FNV-1a hash with additional string data.
 constexpr uint32_t fnv1a_hash_extend(uint32_t hash, const char *str) {
   if (str) {
@@ -1096,9 +1118,66 @@ std::string format_hex_pretty(T val, char separator = '.', bool show_length = tr
   return format_hex_pretty(reinterpret_cast<uint8_t *>(&val), sizeof(T), separator, show_length);
 }
 
+/// Calculate buffer size needed for format_bin_to: "01234567...\0" = bytes * 8 + 1
+constexpr size_t format_bin_size(size_t byte_count) { return byte_count * 8 + 1; }
+
+/** Format byte array as binary string to buffer.
+ *
+ * Each byte is formatted as 8 binary digits (MSB first).
+ * Truncates output if data exceeds buffer capacity.
+ *
+ * @param buffer Output buffer to write to.
+ * @param buffer_size Size of the output buffer.
+ * @param data Pointer to the byte array to format.
+ * @param length Number of bytes in the array.
+ * @return Pointer to buffer.
+ *
+ * Buffer size needed: length * 8 + 1 (use format_bin_size()).
+ *
+ * Example:
+ * @code
+ * char buf[9];  // format_bin_size(1)
+ * format_bin_to(buf, sizeof(buf), data, 1);  // "10101011"
+ * @endcode
+ */
+char *format_bin_to(char *buffer, size_t buffer_size, const uint8_t *data, size_t length);
+
+/// Format byte array as binary to buffer. Automatically deduces buffer size.
+template<size_t N> inline char *format_bin_to(char (&buffer)[N], const uint8_t *data, size_t length) {
+  static_assert(N >= 9, "Buffer must hold at least one binary byte (9 chars)");
+  return format_bin_to(buffer, N, data, length);
+}
+
+/** Format an unsigned integer in binary to buffer, MSB first.
+ *
+ * @tparam N Buffer size (must be >= sizeof(T) * 8 + 1).
+ * @tparam T Unsigned integer type.
+ * @param buffer Output buffer to write to.
+ * @param val The unsigned integer value to format.
+ * @return Pointer to buffer.
+ *
+ * Example:
+ * @code
+ * char buf[9];  // format_bin_size(sizeof(uint8_t))
+ * format_bin_to(buf, uint8_t{0xAA});  // "10101010"
+ * char buf16[17];  // format_bin_size(sizeof(uint16_t))
+ * format_bin_to(buf16, uint16_t{0x1234});  // "0001001000110100"
+ * @endcode
+ */
+template<size_t N, typename T, enable_if_t<std::is_unsigned<T>::value, int> = 0>
+inline char *format_bin_to(char (&buffer)[N], T val) {
+  static_assert(N >= sizeof(T) * 8 + 1, "Buffer too small for type");
+  val = convert_big_endian(val);
+  return format_bin_to(buffer, reinterpret_cast<const uint8_t *>(&val), sizeof(T));
+}
+
 /// Format the byte array \p data of length \p len in binary.
+/// @warning Allocates heap memory. Use format_bin_to() with a stack buffer instead.
+/// Causes heap fragmentation on long-running devices.
 std::string format_bin(const uint8_t *data, size_t length);
 /// Format an unsigned integer in binary, starting with the most significant byte.
+/// @warning Allocates heap memory. Use format_bin_to() with a stack buffer instead.
+/// Causes heap fragmentation on long-running devices.
 template<typename T, enable_if_t<std::is_unsigned<T>::value, int> = 0> std::string format_bin(T val) {
   val = convert_big_endian(val);
   return format_bin(reinterpret_cast<uint8_t *>(&val), sizeof(T));

esphome/core/progmem.h

@@ -12,6 +12,8 @@
 #define ESPHOME_strncpy_P strncpy_P
 #define ESPHOME_strncat_P strncat_P
 #define ESPHOME_snprintf_P snprintf_P
+// Type for pointers to PROGMEM strings (for use with ESPHOME_F return values)
+using ProgmemStr = const __FlashStringHelper *;
 #else
 #define ESPHOME_F(string_literal) (string_literal)
 #define ESPHOME_PGM_P const char *
@@ -19,4 +21,6 @@
 #define ESPHOME_strncpy_P strncpy
 #define ESPHOME_strncat_P strncat
 #define ESPHOME_snprintf_P snprintf
+// Type for pointers to strings (no PROGMEM on non-ESP8266 platforms)
+using ProgmemStr = const char *;
 #endif

esphome/core/string_ref.h

@@ -72,7 +72,6 @@ class StringRef {
 
   constexpr const char *c_str() const { return base_; }
   constexpr size_type size() const { return len_; }
-  constexpr size_type length() const { return len_; }
   constexpr bool empty() const { return len_ == 0; }
   constexpr const_reference operator[](size_type pos) const { return *(base_ + pos); }
 
@@ -81,32 +80,6 @@ class StringRef {
 
   operator std::string() const { return str(); }
 
-  /// Find first occurrence of substring, returns std::string::npos if not found.
-  /// Note: Requires the underlying string to be null-terminated.
-  size_type find(const char *s, size_type pos = 0) const {
-    if (pos >= len_)
-      return std::string::npos;
-    const char *result = std::strstr(base_ + pos, s);
-    // Verify entire match is within bounds (strstr searches to null terminator)
-    if (result && result + std::strlen(s) <= base_ + len_)
-      return static_cast<size_type>(result - base_);
-    return std::string::npos;
-  }
-  size_type find(char c, size_type pos = 0) const {
-    if (pos >= len_)
-      return std::string::npos;
-    const void *result = std::memchr(base_ + pos, static_cast<unsigned char>(c), len_ - pos);
-    return result ? static_cast<size_type>(static_cast<const char *>(result) - base_) : std::string::npos;
-  }
-
-  /// Return substring as std::string
-  std::string substr(size_type pos = 0, size_type count = std::string::npos) const {
-    if (pos >= len_)
-      return std::string();
-    size_type actual_count = (count == std::string::npos || pos + count > len_) ? len_ - pos : count;
-    return std::string(base_ + pos, actual_count);
-  }
-
  private:
   const char *base_;
   size_type len_;
@@ -187,43 +160,6 @@ inline std::string operator+(const std::string &lhs, const StringRef &rhs) {
   str.append(rhs.c_str(), rhs.size());
   return str;
 }
-// String conversion functions for ADL compatibility (allows stoi(x) where x is StringRef)
-// Must be in esphome namespace for ADL to find them. Uses strtol/strtod directly to avoid heap allocation.
-namespace internal {
-// NOLINTBEGIN(google-runtime-int)
-template<typename R, typename F> inline R parse_number(const StringRef &str, size_t *pos, F conv) {
-  char *end;
-  R result = conv(str.c_str(), &end);
-  // Set pos to 0 on conversion failure (when no characters consumed), otherwise index after number
-  if (pos)
-    *pos = (end == str.c_str()) ? 0 : static_cast<size_t>(end - str.c_str());
-  return result;
-}
-template<typename R, typename F> inline R parse_number(const StringRef &str, size_t *pos, int base, F conv) {
-  char *end;
-  R result = conv(str.c_str(), &end, base);
-  // Set pos to 0 on conversion failure (when no characters consumed), otherwise index after number
-  if (pos)
-    *pos = (end == str.c_str()) ? 0 : static_cast<size_t>(end - str.c_str());
-  return result;
-}
-// NOLINTEND(google-runtime-int)
-}  // namespace internal
-// NOLINTBEGIN(readability-identifier-naming,google-runtime-int)
-inline int stoi(const StringRef &str, size_t *pos = nullptr, int base = 10) {
-  return static_cast<int>(internal::parse_number<long>(str, pos, base, std::strtol));
-}
-inline long stol(const StringRef &str, size_t *pos = nullptr, int base = 10) {
-  return internal::parse_number<long>(str, pos, base, std::strtol);
-}
-inline float stof(const StringRef &str, size_t *pos = nullptr) {
-  return internal::parse_number<float>(str, pos, std::strtof);
-}
-inline double stod(const StringRef &str, size_t *pos = nullptr) {
-  return internal::parse_number<double>(str, pos, std::strtod);
-}
-// NOLINTEND(readability-identifier-naming,google-runtime-int)
-
 #ifdef USE_JSON
 // NOLINTNEXTLINE(readability-identifier-naming)
 inline void convertToJson(const StringRef &src, JsonVariant dst) { dst.set(src.c_str()); }

esphome/cpp_types.py

@@ -44,4 +44,3 @@ gpio_Flags = gpio_ns.enum("Flags", is_class=True)
 EntityCategory = esphome_ns.enum("EntityCategory")
 Parented = esphome_ns.class_("Parented")
 ESPTime = esphome_ns.struct("ESPTime")
-StringRef = esphome_ns.class_("StringRef")

script/ci-custom.py

@@ -682,6 +682,7 @@ def lint_trailing_whitespace(fname, match):
 # Heap-allocating helpers that cause fragmentation on long-running embedded devices.
 # These return std::string and should be replaced with stack-based alternatives.
 HEAP_ALLOCATING_HELPERS = {
+    "format_bin": "format_bin_to() with a stack buffer",
     "format_hex": "format_hex_to() with a stack buffer",
     "format_hex_pretty": "format_hex_pretty_to() with a stack buffer",
     "format_mac_address_pretty": "format_mac_addr_upper() with a stack buffer",
@@ -699,6 +700,7 @@ HEAP_ALLOCATING_HELPERS = {
     # get_mac_address(?!_) ensures we don't match get_mac_address_into_buffer, etc.
     # CPP_RE_EOL captures rest of line so NOLINT comments are detected
     r"[^\w]("
+    r"format_bin(?!_)|"
     r"format_hex(?!_)|"
     r"format_hex_pretty(?!_)|"
     r"format_mac_address_pretty|"

tests/components/alarm_control_panel/common.yaml

@@ -9,6 +9,8 @@ alarm_control_panel:
     name: Alarm Panel
     codes:
       - "1234"
+      - "5678"
+      - "0000"
     requires_code_to_arm: true
     arming_home_time: 1s
     arming_night_time: 1s
@@ -29,6 +31,7 @@ alarm_control_panel:
     name: Alarm Panel 2
     codes:
       - "1234"
+      - "9999"
     requires_code_to_arm: true
     arming_home_time: 1s
     arming_night_time: 1s

tests/components/udp/common.yaml

@@ -5,7 +5,10 @@ wifi:
 udp:
   id: my_udp
   listen_address: 239.0.60.53
-  addresses: ["239.0.60.53"]
+  addresses:
+    - "239.0.60.53"
+    - "192.168.1.255"
+    - "10.0.0.255"
   on_receive:
     - logger.log:
         format: "Received %d bytes"

tests/integration/fixtures/select_stringref_trigger.yaml

@@ -1,85 +0,0 @@
-esphome:
-  name: select-stringref-test
-  friendly_name: Select StringRef Test
-
-host:
-
-logger:
-  level: DEBUG
-
-api:
-
-select:
-  - platform: template
-    name: "Test Select"
-    id: test_select
-    optimistic: true
-    options:
-      - "Option A"
-      - "Option B"
-      - "Option C"
-    initial_option: "Option A"
-    on_value:
-      then:
-        # Test 1: Log the value directly (StringRef -> const char* via c_str())
-        - logger.log:
-            format: "Select value: %s"
-            args: ['x.c_str()']
-        # Test 2: String concatenation (StringRef + const char* -> std::string)
-        - lambda: |-
-            std::string with_suffix = x + " selected";
-            ESP_LOGI("test", "Concatenated: %s", with_suffix.c_str());
-        # Test 3: Comparison (StringRef == const char*)
-        - lambda: |-
-            if (x == "Option B") {
-              ESP_LOGI("test", "Option B was selected");
-            }
-        # Test 4: Use index parameter (variable name is 'i')
-        - lambda: |-
-            ESP_LOGI("test", "Select index: %d", (int)i);
-        # Test 5: StringRef.length() method
-        - lambda: |-
-            ESP_LOGI("test", "Length: %d", (int)x.length());
-        # Test 6: StringRef.find() method with substring
-        - lambda: |-
-            if (x.find("Option") != std::string::npos) {
-              ESP_LOGI("test", "Found 'Option' in value");
-            }
-        # Test 7: StringRef.find() method with character
-        - lambda: |-
-            size_t space_pos = x.find(' ');
-            if (space_pos != std::string::npos) {
-              ESP_LOGI("test", "Space at position: %d", (int)space_pos);
-            }
-        # Test 8: StringRef.substr() method
-        - lambda: |-
-            std::string prefix = x.substr(0, 6);
-            ESP_LOGI("test", "Substr prefix: %s", prefix.c_str());
-
-  # Second select with numeric options to test ADL functions
-  - platform: template
-    name: "Baud Rate"
-    id: baud_select
-    optimistic: true
-    options:
-      - "9600"
-      - "115200"
-    initial_option: "9600"
-    on_value:
-      then:
-        # Test 9: stoi via ADL
-        - lambda: |-
-            int baud = stoi(x);
-            ESP_LOGI("test", "stoi result: %d", baud);
-        # Test 10: stol via ADL
-        - lambda: |-
-            long baud_long = stol(x);
-            ESP_LOGI("test", "stol result: %ld", baud_long);
-        # Test 11: stof via ADL
-        - lambda: |-
-            float baud_float = stof(x);
-            ESP_LOGI("test", "stof result: %.0f", baud_float);
-        # Test 12: stod via ADL
-        - lambda: |-
-            double baud_double = stod(x);
-            ESP_LOGI("test", "stod result: %.0f", baud_double);

tests/integration/fixtures/udp_send_receive.yaml

@@ -0,0 +1,33 @@
+esphome:
+  name: udp-test
+
+host:
+
+api:
+  services:
+    - service: send_udp_message
+      then:
+        - udp.write:
+            id: test_udp
+            data: "HELLO_UDP_TEST"
+    - service: send_udp_bytes
+      then:
+        - udp.write:
+            id: test_udp
+            data: [0x55, 0x44, 0x50, 0x5F, 0x42, 0x59, 0x54, 0x45, 0x53]  # "UDP_BYTES"
+
+logger:
+  level: DEBUG
+
+udp:
+  - id: test_udp
+    addresses:
+      - "127.0.0.1"
+      - "127.0.0.2"
+    port:
+      listen_port: UDP_LISTEN_PORT_PLACEHOLDER
+      broadcast_port: UDP_BROADCAST_PORT_PLACEHOLDER
+    on_receive:
+      - logger.log:
+          format: "Received UDP: %d bytes"
+          args: [data.size()]

tests/integration/test_select_stringref_trigger.py

@@ -1,143 +0,0 @@
-"""Integration test for select on_value trigger with StringRef parameter."""
-
-from __future__ import annotations
-
-import asyncio
-import re
-
-import pytest
-
-from .types import APIClientConnectedFactory, RunCompiledFunction
-
-
-@pytest.mark.asyncio
-async def test_select_stringref_trigger(
-    yaml_config: str,
-    run_compiled: RunCompiledFunction,
-    api_client_connected: APIClientConnectedFactory,
-) -> None:
-    """Test select on_value trigger passes StringRef that works with string operations."""
-    loop = asyncio.get_running_loop()
-
-    # Track log messages to verify StringRef operations work
-    value_logged_future = loop.create_future()
-    concatenated_future = loop.create_future()
-    comparison_future = loop.create_future()
-    index_logged_future = loop.create_future()
-    length_future = loop.create_future()
-    find_substr_future = loop.create_future()
-    find_char_future = loop.create_future()
-    substr_future = loop.create_future()
-    # ADL functions
-    stoi_future = loop.create_future()
-    stol_future = loop.create_future()
-    stof_future = loop.create_future()
-    stod_future = loop.create_future()
-
-    # Patterns to match in logs
-    value_pattern = re.compile(r"Select value: Option B")
-    concatenated_pattern = re.compile(r"Concatenated: Option B selected")
-    comparison_pattern = re.compile(r"Option B was selected")
-    index_pattern = re.compile(r"Select index: 1")
-    length_pattern = re.compile(r"Length: 8")  # "Option B" is 8 chars
-    find_substr_pattern = re.compile(r"Found 'Option' in value")
-    find_char_pattern = re.compile(r"Space at position: 6")  # space at index 6
-    substr_pattern = re.compile(r"Substr prefix: Option")
-    # ADL function patterns (115200 from baud rate select)
-    stoi_pattern = re.compile(r"stoi result: 115200")
-    stol_pattern = re.compile(r"stol result: 115200")
-    stof_pattern = re.compile(r"stof result: 115200")
-    stod_pattern = re.compile(r"stod result: 115200")
-
-    def check_output(line: str) -> None:
-        """Check log output for expected messages."""
-        if not value_logged_future.done() and value_pattern.search(line):
-            value_logged_future.set_result(True)
-        if not concatenated_future.done() and concatenated_pattern.search(line):
-            concatenated_future.set_result(True)
-        if not comparison_future.done() and comparison_pattern.search(line):
-            comparison_future.set_result(True)
-        if not index_logged_future.done() and index_pattern.search(line):
-            index_logged_future.set_result(True)
-        if not length_future.done() and length_pattern.search(line):
-            length_future.set_result(True)
-        if not find_substr_future.done() and find_substr_pattern.search(line):
-            find_substr_future.set_result(True)
-        if not find_char_future.done() and find_char_pattern.search(line):
-            find_char_future.set_result(True)
-        if not substr_future.done() and substr_pattern.search(line):
-            substr_future.set_result(True)
-        # ADL functions
-        if not stoi_future.done() and stoi_pattern.search(line):
-            stoi_future.set_result(True)
-        if not stol_future.done() and stol_pattern.search(line):
-            stol_future.set_result(True)
-        if not stof_future.done() and stof_pattern.search(line):
-            stof_future.set_result(True)
-        if not stod_future.done() and stod_pattern.search(line):
-            stod_future.set_result(True)
-
-    async with (
-        run_compiled(yaml_config, line_callback=check_output),
-        api_client_connected() as client,
-    ):
-        # Verify device info
-        device_info = await client.device_info()
-        assert device_info is not None
-        assert device_info.name == "select-stringref-test"
-
-        # List entities to find our select
-        entities, _ = await client.list_entities_services()
-
-        select_entity = next(
-            (e for e in entities if hasattr(e, "options") and e.name == "Test Select"),
-            None,
-        )
-        assert select_entity is not None, "Test Select entity not found"
-
-        baud_entity = next(
-            (e for e in entities if hasattr(e, "options") and e.name == "Baud Rate"),
-            None,
-        )
-        assert baud_entity is not None, "Baud Rate entity not found"
-
-        # Change select to Option B - this should trigger on_value with StringRef
-        client.select_command(select_entity.key, "Option B")
-        # Change baud to 115200 - this tests ADL functions (stoi, stol, stof, stod)
-        client.select_command(baud_entity.key, "115200")
-
-        # Wait for all log messages confirming StringRef operations work
-        try:
-            await asyncio.wait_for(
-                asyncio.gather(
-                    value_logged_future,
-                    concatenated_future,
-                    comparison_future,
-                    index_logged_future,
-                    length_future,
-                    find_substr_future,
-                    find_char_future,
-                    substr_future,
-                    stoi_future,
-                    stol_future,
-                    stof_future,
-                    stod_future,
-                ),
-                timeout=5.0,
-            )
-        except TimeoutError:
-            results = {
-                "value_logged": value_logged_future.done(),
-                "concatenated": concatenated_future.done(),
-                "comparison": comparison_future.done(),
-                "index_logged": index_logged_future.done(),
-                "length": length_future.done(),
-                "find_substr": find_substr_future.done(),
-                "find_char": find_char_future.done(),
-                "substr": substr_future.done(),
-                "stoi": stoi_future.done(),
-                "stol": stol_future.done(),
-                "stof": stof_future.done(),
-                "stod": stod_future.done(),
-            }
-            pytest.fail(f"StringRef operations failed - received: {results}")

tests/integration/test_udp.py

@@ -0,0 +1,171 @@
+"""Integration test for UDP component."""
+
+from __future__ import annotations
+
+import asyncio
+from collections.abc import AsyncGenerator
+import contextlib
+from contextlib import asynccontextmanager
+from dataclasses import dataclass, field
+import socket
+
+import pytest
+
+from .types import APIClientConnectedFactory, RunCompiledFunction
+
+
+@dataclass
+class UDPReceiver:
+    """Collects UDP messages received."""
+
+    messages: list[bytes] = field(default_factory=list)
+    message_received: asyncio.Event = field(default_factory=asyncio.Event)
+
+    def on_message(self, data: bytes) -> None:
+        """Called when a message is received."""
+        self.messages.append(data)
+        self.message_received.set()
+
+    async def wait_for_message(self, timeout: float = 5.0) -> bytes:
+        """Wait for a message to be received."""
+        await asyncio.wait_for(self.message_received.wait(), timeout=timeout)
+        return self.messages[-1]
+
+    async def wait_for_content(self, content: bytes, timeout: float = 5.0) -> bytes:
+        """Wait for a specific message content."""
+        deadline = asyncio.get_event_loop().time() + timeout
+        while True:
+            for msg in self.messages:
+                if content in msg:
+                    return msg
+            remaining = deadline - asyncio.get_event_loop().time()
+            if remaining <= 0:
+                raise TimeoutError(
+                    f"Content {content!r} not found in messages: {self.messages}"
+                )
+            try:
+                await asyncio.wait_for(self.message_received.wait(), timeout=remaining)
+                self.message_received.clear()
+            except TimeoutError:
+                raise TimeoutError(
+                    f"Content {content!r} not found in messages: {self.messages}"
+                ) from None
+
+
+@asynccontextmanager
+async def udp_listener(port: int = 0) -> AsyncGenerator[tuple[int, UDPReceiver]]:
+    """Async context manager that listens for UDP messages.
+
+    Args:
+        port: Port to listen on. 0 for auto-assign.
+
+    Yields:
+        Tuple of (port, UDPReceiver) where port is the UDP port being listened on.
+    """
+    sock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
+    sock.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
+    sock.bind(("127.0.0.1", port))
+    sock.setblocking(False)
+    actual_port = sock.getsockname()[1]
+
+    receiver = UDPReceiver()
+
+    async def receive_messages() -> None:
+        """Background task to receive UDP messages."""
+        loop = asyncio.get_running_loop()
+        while True:
+            try:
+                data = await loop.sock_recv(sock, 4096)
+                if data:
+                    receiver.on_message(data)
+            except BlockingIOError:
+                await asyncio.sleep(0.01)
+            except Exception:
+                break
+
+    task = asyncio.create_task(receive_messages())
+    try:
+        yield actual_port, receiver
+    finally:
+        task.cancel()
+        with contextlib.suppress(asyncio.CancelledError):
+            await task
+        sock.close()
+
+
+@pytest.mark.asyncio
+async def test_udp_send_receive(
+    yaml_config: str,
+    run_compiled: RunCompiledFunction,
+    api_client_connected: APIClientConnectedFactory,
+) -> None:
+    """Test UDP component can send messages with multiple addresses configured."""
+    # Track log lines to verify dump_config output
+    log_lines: list[str] = []
+
+    def on_log_line(line: str) -> None:
+        log_lines.append(line)
+
+    async with udp_listener() as (udp_port, receiver):
+        # Replace placeholders in the config
+        config = yaml_config.replace("UDP_LISTEN_PORT_PLACEHOLDER", str(udp_port + 1))
+        config = config.replace("UDP_BROADCAST_PORT_PLACEHOLDER", str(udp_port))
+
+        async with (
+            run_compiled(config, line_callback=on_log_line),
+            api_client_connected() as client,
+        ):
+            # Verify device is running
+            device_info = await client.device_info()
+            assert device_info is not None
+            assert device_info.name == "udp-test"
+
+            # Get services
+            _, services = await client.list_entities_services()
+
+            # Test sending string message
+            send_message_service = next(
+                (s for s in services if s.name == "send_udp_message"), None
+            )
+            assert send_message_service is not None, (
+                "send_udp_message service not found"
+            )
+
+            await client.execute_service(send_message_service, {})
+
+            try:
+                msg = await receiver.wait_for_content(b"HELLO_UDP_TEST", timeout=5.0)
+                assert b"HELLO_UDP_TEST" in msg
+            except TimeoutError:
+                pytest.fail(
+                    f"UDP string message not received. Got: {receiver.messages}"
+                )
+
+            # Test sending bytes
+            send_bytes_service = next(
+                (s for s in services if s.name == "send_udp_bytes"), None
+            )
+            assert send_bytes_service is not None, "send_udp_bytes service not found"
+
+            await client.execute_service(send_bytes_service, {})
+
+            try:
+                msg = await receiver.wait_for_content(b"UDP_BYTES", timeout=5.0)
+                assert b"UDP_BYTES" in msg
+            except TimeoutError:
+                pytest.fail(f"UDP bytes message not received. Got: {receiver.messages}")
+
+            # Verify we received at least 2 messages (string + bytes)
+            assert len(receiver.messages) >= 2, (
+                f"Expected at least 2 messages, got {len(receiver.messages)}"
+            )
+
+            # Verify dump_config logged all configured addresses
+            # This tests that FixedVector<const char*> stores addresses correctly
+            log_text = "\n".join(log_lines)
+            assert "Address: 127.0.0.1" in log_text, (
+                f"Address 127.0.0.1 not found in dump_config. Log: {log_text[-2000:]}"
+            )
+            assert "Address: 127.0.0.2" in log_text, (
+                f"Address 127.0.0.2 not found in dump_config. Log: {log_text[-2000:]}"
+            )