bot nits

esphome/components/esp32_hosted/update/esp32_hosted_update.cpp

@@ -196,11 +196,14 @@ bool Esp32HostedUpdate::fetch_manifest_() {
     int read_or_error = container->read(buf, sizeof(buf));
     App.feed_wdt();
     yield();
-    auto result = http_request::http_read_loop_result(read_or_error, last_data_time, read_timeout);
+    auto result =
+        http_request::http_read_loop_result(read_or_error, last_data_time, read_timeout, container->is_read_complete());
     if (result == http_request::HttpReadLoopResult::RETRY)
       continue;
+    // Note: COMPLETE is currently unreachable since the loop condition checks bytes_read < content_length,
+    // but this is defensive code in case chunked transfer encoding support is added in the future.
     if (result != http_request::HttpReadLoopResult::DATA)
-      break;  // ERROR or TIMEOUT
+      break;  // COMPLETE, ERROR, or TIMEOUT
     json_str.append(reinterpret_cast<char *>(buf), read_or_error);
   }
   container->end();
@@ -321,9 +324,14 @@ bool Esp32HostedUpdate::stream_firmware_to_coprocessor_() {
     App.feed_wdt();
     yield();
 
-    auto result = http_request::http_read_loop_result(read_or_error, last_data_time, read_timeout);
+    auto result =
+        http_request::http_read_loop_result(read_or_error, last_data_time, read_timeout, container->is_read_complete());
     if (result == http_request::HttpReadLoopResult::RETRY)
       continue;
+    // Note: COMPLETE is currently unreachable since the loop condition checks bytes_read < content_length,
+    // but this is defensive code in case chunked transfer encoding support is added in the future.
+    if (result == http_request::HttpReadLoopResult::COMPLETE)
+      break;
     if (result != http_request::HttpReadLoopResult::DATA) {
       if (result == http_request::HttpReadLoopResult::TIMEOUT) {
         ESP_LOGE(TAG, "Timeout reading firmware data");

esphome/components/http_request/http_request.h

@@ -26,6 +26,7 @@ struct Header {
 enum HttpStatus {
   HTTP_STATUS_OK = 200,
   HTTP_STATUS_NO_CONTENT = 204,
+  HTTP_STATUS_RESET_CONTENT = 205,
   HTTP_STATUS_PARTIAL_CONTENT = 206,
 
   /* 3xx - Redirection */
@@ -126,19 +127,21 @@ struct HttpReadResult {
 
 /// Result of processing a non-blocking read with timeout (for manual loops)
 enum class HttpReadLoopResult : uint8_t {
-  DATA,     ///< Data was read, process it
-  RETRY,    ///< No data yet, already delayed, caller should continue loop
-  ERROR,    ///< Read error, caller should exit loop
-  TIMEOUT,  ///< Timeout waiting for data, caller should exit loop
+  DATA,      ///< Data was read, process it
+  COMPLETE,  ///< All content has been read, caller should exit loop
+  RETRY,     ///< No data yet, already delayed, caller should continue loop
+  ERROR,     ///< Read error, caller should exit loop
+  TIMEOUT,   ///< Timeout waiting for data, caller should exit loop
 };
 
 /// Process a read result with timeout tracking and delay handling
 /// @param bytes_read_or_error Return value from read() - positive for bytes read, negative for error
 /// @param last_data_time Time of last successful read, updated when data received
 /// @param timeout_ms Maximum time to wait for data
-/// @return DATA if data received, RETRY if should continue loop, ERROR/TIMEOUT if should exit
-inline HttpReadLoopResult http_read_loop_result(int bytes_read_or_error, uint32_t &last_data_time,
-                                                uint32_t timeout_ms) {
+/// @param is_read_complete Whether all expected content has been read (from HttpContainer::is_read_complete())
+/// @return How the caller should proceed - see HttpReadLoopResult enum
+inline HttpReadLoopResult http_read_loop_result(int bytes_read_or_error, uint32_t &last_data_time, uint32_t timeout_ms,
+                                                bool is_read_complete) {
   if (bytes_read_or_error > 0) {
     last_data_time = millis();
     return HttpReadLoopResult::DATA;
@@ -146,7 +149,10 @@ inline HttpReadLoopResult http_read_loop_result(int bytes_read_or_error, uint32_
   if (bytes_read_or_error < 0) {
     return HttpReadLoopResult::ERROR;
   }
-  // bytes_read_or_error == 0: no data available yet
+  // bytes_read_or_error == 0: either "no data yet" or "all content read"
+  if (is_read_complete) {
+    return HttpReadLoopResult::COMPLETE;
+  }
   if (millis() - last_data_time >= timeout_ms) {
     return HttpReadLoopResult::TIMEOUT;
   }
@@ -159,9 +165,9 @@ class HttpRequestComponent;
 class HttpContainer : public Parented<HttpRequestComponent> {
  public:
   virtual ~HttpContainer() = default;
-  size_t content_length;
-  int status_code;
-  uint32_t duration_ms;
+  size_t content_length{0};
+  int status_code{-1};  ///< -1 indicates no response received yet
+  uint32_t duration_ms{0};
 
   /**
    * @brief Read data from the HTTP response body.
@@ -194,9 +200,24 @@ class HttpContainer : public Parented<HttpRequestComponent> {
   virtual void end() = 0;
 
   void set_secure(bool secure) { this->secure_ = secure; }
+  void set_chunked(bool chunked) { this->is_chunked_ = chunked; }
 
   size_t get_bytes_read() const { return this->bytes_read_; }
 
+  /// Check if all expected content has been read
+  /// For chunked responses, returns false (completion detected via read() returning error/EOF)
+  bool is_read_complete() const {
+    // Per RFC 9112, these responses have no body:
+    // - 1xx (Informational), 204 No Content, 205 Reset Content, 304 Not Modified
+    if ((this->status_code >= 100 && this->status_code < 200) || this->status_code == HTTP_STATUS_NO_CONTENT ||
+        this->status_code == HTTP_STATUS_RESET_CONTENT || this->status_code == HTTP_STATUS_NOT_MODIFIED) {
+      return true;
+    }
+    // For non-chunked responses, complete when bytes_read >= content_length
+    // This handles both Content-Length: 0 and Content-Length: N cases
+    return !this->is_chunked_ && this->bytes_read_ >= this->content_length;
+  }
+
   /**
    * @brief Get response headers.
    *
@@ -209,6 +230,7 @@ class HttpContainer : public Parented<HttpRequestComponent> {
  protected:
   size_t bytes_read_{0};
   bool secure_{false};
+  bool is_chunked_{false};  ///< True if response uses chunked transfer encoding
   std::map<std::string, std::list<std::string>> response_headers_{};
 };
 
@@ -219,7 +241,7 @@ class HttpContainer : public Parented<HttpRequestComponent> {
 /// @param total_size Total bytes to read
 /// @param chunk_size Maximum bytes per read call
 /// @param timeout_ms Read timeout in milliseconds
-/// @return HttpReadResult with status and error_code on failure
+/// @return HttpReadResult with status and error_code on failure; use container->get_bytes_read() for total bytes read
 inline HttpReadResult http_read_fully(HttpContainer *container, uint8_t *buffer, size_t total_size, size_t chunk_size,
                                       uint32_t timeout_ms) {
   size_t read_index = 0;
@@ -231,9 +253,11 @@ inline HttpReadResult http_read_fully(HttpContainer *container, uint8_t *buffer,
     App.feed_wdt();
     yield();
 
-    auto result = http_read_loop_result(read_bytes_or_error, last_data_time, timeout_ms);
+    auto result = http_read_loop_result(read_bytes_or_error, last_data_time, timeout_ms, container->is_read_complete());
     if (result == HttpReadLoopResult::RETRY)
       continue;
+    if (result == HttpReadLoopResult::COMPLETE)
+      break;  // Server sent less data than requested, but transfer is complete
     if (result == HttpReadLoopResult::ERROR)
       return {HttpReadStatus::ERROR, read_bytes_or_error};
     if (result == HttpReadLoopResult::TIMEOUT)
@@ -393,11 +417,12 @@ template<typename... Ts> class HttpRequestSendAction : public Action<Ts...> {
           int read_or_error = container->read(buf + read_index, std::min<size_t>(max_length - read_index, 512));
           App.feed_wdt();
           yield();
-          auto result = http_read_loop_result(read_or_error, last_data_time, read_timeout);
+          auto result =
+              http_read_loop_result(read_or_error, last_data_time, read_timeout, container->is_read_complete());
           if (result == HttpReadLoopResult::RETRY)
             continue;
           if (result != HttpReadLoopResult::DATA)
-            break;  // ERROR or TIMEOUT
+            break;  // COMPLETE, ERROR, or TIMEOUT
           read_index += read_or_error;
         }
         response_body.reserve(read_index);

esphome/components/http_request/http_request_arduino.cpp

@@ -135,9 +135,23 @@ std::shared_ptr<HttpContainer> HttpRequestArduino::perform(const std::string &ur
   // When cast to size_t, -1 becomes SIZE_MAX (4294967295 on 32-bit).
   // The read() method handles this: bytes_read_ can never reach SIZE_MAX, so the
   // early return check (bytes_read_ >= content_length) will never trigger.
+  //
+  // TODO: Chunked transfer encoding is NOT properly supported on Arduino.
+  // The implementation in #7884 was incomplete - it only works correctly on ESP-IDF where
+  // esp_http_client_read() decodes chunks internally. On Arduino, using getStreamPtr()
+  // returns raw TCP data with chunk framing (e.g., "12a\r\n{json}\r\n0\r\n\r\n") instead
+  // of decoded content. This wasn't noticed because requests would complete and payloads
+  // were only examined on IDF. The long transfer times were also masked by the misleading
+  // "HTTP on Arduino version >= 3.1 is **very** slow" warning above. This causes two issues:
+  // 1. Response body is corrupted - contains chunk size headers mixed with data
+  // 2. Cannot detect end of transfer - connection stays open (keep-alive), causing timeout
+  // The proper fix would be to use getString() for chunked responses, which decodes chunks
+  // internally, but this buffers the entire response in memory.
   int content_length = container->client_.getSize();
   ESP_LOGD(TAG, "Content-Length: %d", content_length);
   container->content_length = (size_t) content_length;
+  // -1 (SIZE_MAX when cast to size_t) means chunked transfer encoding
+  container->set_chunked(content_length == -1);
   container->duration_ms = millis() - start;
 
   return container;
@@ -178,9 +192,9 @@ int HttpContainerArduino::read(uint8_t *buf, size_t max_len) {
 
   if (bufsize == 0) {
     this->duration_ms += (millis() - start);
-    // Check if we've read all expected content (only valid when content_length is known and not SIZE_MAX)
-    // For chunked encoding (content_length == SIZE_MAX), we can't use this check
-    if (this->content_length > 0 && this->bytes_read_ >= this->content_length) {
+    // Check if we've read all expected content (non-chunked only)
+    // For chunked encoding (content_length == SIZE_MAX), is_read_complete() returns false
+    if (this->is_read_complete()) {
       return 0;  // All content read successfully
     }
     // No data available - check if connection is still open

esphome/components/http_request/http_request_idf.cpp

@@ -160,6 +160,7 @@ std::shared_ptr<HttpContainer> HttpRequestIDF::perform(const std::string &url, c
   // esp_http_client_fetch_headers() returns 0 for chunked transfer encoding (no Content-Length header).
   // The read() method handles content_length == 0 specially to support chunked responses.
   container->content_length = esp_http_client_fetch_headers(client);
+  container->set_chunked(esp_http_client_is_chunked_response(client));
   container->feed_wdt();
   container->status_code = esp_http_client_get_status_code(client);
   container->feed_wdt();
@@ -195,6 +196,7 @@ std::shared_ptr<HttpContainer> HttpRequestIDF::perform(const std::string &url, c
 
       container->feed_wdt();
       container->content_length = esp_http_client_fetch_headers(client);
+      container->set_chunked(esp_http_client_is_chunked_response(client));
       container->feed_wdt();
       container->status_code = esp_http_client_get_status_code(client);
       container->feed_wdt();
@@ -239,10 +241,9 @@ int HttpContainerIDF::read(uint8_t *buf, size_t max_len) {
   const uint32_t start = millis();
   watchdog::WatchdogManager wdm(this->parent_->get_watchdog_timeout());
 
-  // Check if we've already read all expected content
-  // Skip this check when content_length is 0 (chunked transfer encoding or unknown length)
-  // For chunked responses, esp_http_client_read() will return 0 when all data is received
-  if (this->content_length > 0 && this->bytes_read_ >= this->content_length) {
+  // Check if we've already read all expected content (non-chunked only)
+  // For chunked responses (content_length == 0), esp_http_client_read() handles EOF
+  if (this->is_read_complete()) {
     return 0;  // All content read successfully
   }
 

esphome/components/http_request/ota/ota_http_request.cpp

@@ -130,9 +130,13 @@ uint8_t OtaHttpRequestComponent::do_ota_() {
     App.feed_wdt();
     yield();
 
-    auto result = http_read_loop_result(bufsize_or_error, last_data_time, read_timeout);
+    auto result = http_read_loop_result(bufsize_or_error, last_data_time, read_timeout, container->is_read_complete());
     if (result == HttpReadLoopResult::RETRY)
       continue;
+    // Note: COMPLETE is currently unreachable since the loop condition checks bytes_read < content_length,
+    // but this is defensive code in case chunked transfer encoding support is added for OTA in the future.
+    if (result == HttpReadLoopResult::COMPLETE)
+      break;
     if (result != HttpReadLoopResult::DATA) {
       if (result == HttpReadLoopResult::TIMEOUT) {
         ESP_LOGE(TAG, "Timeout reading data");

esphome/components/mipi_spi/mipi_spi.cpp

@@ -1,39 +1,6 @@
 #include "mipi_spi.h"
 #include "esphome/core/log.h"
 
-namespace esphome::mipi_spi {
-
-void internal_dump_config(const char *model, int width, int height, int offset_width, int offset_height, uint8_t madctl,
-                          bool invert_colors, int display_bits, bool is_big_endian, const optional<uint8_t> &brightness,
-                          GPIOPin *cs, GPIOPin *reset, GPIOPin *dc, int spi_mode, uint32_t data_rate, int bus_width) {
-  ESP_LOGCONFIG(TAG,
-                "MIPI_SPI Display\n"
-                "  Model: %s\n"
-                "  Width: %d\n"
-                "  Height: %d\n"
-                "  Swap X/Y: %s\n"
-                "  Mirror X: %s\n"
-                "  Mirror Y: %s\n"
-                "  Invert colors: %s\n"
-                "  Color order: %s\n"
-                "  Display pixels: %d bits\n"
-                "  Endianness: %s\n"
-                "  SPI Mode: %d\n"
-                "  SPI Data rate: %uMHz\n"
-                "  SPI Bus width: %d",
-                model, width, height, YESNO(madctl & MADCTL_MV), YESNO(madctl & (MADCTL_MX | MADCTL_XFLIP)),
-                YESNO(madctl & (MADCTL_MY | MADCTL_YFLIP)), YESNO(invert_colors), (madctl & MADCTL_BGR) ? "BGR" : "RGB",
-                display_bits, is_big_endian ? "Big" : "Little", spi_mode, static_cast<unsigned>(data_rate / 1000000),
-                bus_width);
-  LOG_PIN("  CS Pin: ", cs);
-  LOG_PIN("  Reset Pin: ", reset);
-  LOG_PIN("  DC Pin: ", dc);
-  if (offset_width != 0)
-    ESP_LOGCONFIG(TAG, "  Offset width: %d", offset_width);
-  if (offset_height != 0)
-    ESP_LOGCONFIG(TAG, "  Offset height: %d", offset_height);
-  if (brightness.has_value())
-    ESP_LOGCONFIG(TAG, "  Brightness: %u", brightness.value());
-}
-
-}  // namespace esphome::mipi_spi
+namespace esphome {
+namespace mipi_spi {}  // namespace mipi_spi
+}  // namespace esphome

esphome/components/mipi_spi/mipi_spi.h

@@ -63,11 +63,6 @@ enum BusType {
   BUS_TYPE_SINGLE_16 = 16,  // Single bit bus, but 16 bits per transfer
 };
 
-// Helper function for dump_config - defined in mipi_spi.cpp to allow use of LOG_PIN macro
-void internal_dump_config(const char *model, int width, int height, int offset_width, int offset_height, uint8_t madctl,
-                          bool invert_colors, int display_bits, bool is_big_endian, const optional<uint8_t> &brightness,
-                          GPIOPin *cs, GPIOPin *reset, GPIOPin *dc, int spi_mode, uint32_t data_rate, int bus_width);
-
 /**
  * Base class for MIPI SPI displays.
  * All the methods are defined here in the header file, as it is not possible to define templated methods in a cpp file.
@@ -206,9 +201,37 @@ class MipiSpi : public display::Display,
   }
 
   void dump_config() override {
-    internal_dump_config(this->model_, WIDTH, HEIGHT, OFFSET_WIDTH, OFFSET_HEIGHT, this->madctl_, this->invert_colors_,
-                         DISPLAYPIXEL * 8, IS_BIG_ENDIAN, this->brightness_, this->cs_, this->reset_pin_, this->dc_pin_,
-                         this->mode_, this->data_rate_, BUS_TYPE);
+    esph_log_config(TAG,
+                    "MIPI_SPI Display\n"
+                    "  Model: %s\n"
+                    "  Width: %u\n"
+                    "  Height: %u",
+                    this->model_, WIDTH, HEIGHT);
+    if constexpr (OFFSET_WIDTH != 0)
+      esph_log_config(TAG, "  Offset width: %u", OFFSET_WIDTH);
+    if constexpr (OFFSET_HEIGHT != 0)
+      esph_log_config(TAG, "  Offset height: %u", OFFSET_HEIGHT);
+    esph_log_config(TAG,
+                    "  Swap X/Y: %s\n"
+                    "  Mirror X: %s\n"
+                    "  Mirror Y: %s\n"
+                    "  Invert colors: %s\n"
+                    "  Color order: %s\n"
+                    "  Display pixels: %d bits\n"
+                    "  Endianness: %s\n",
+                    YESNO(this->madctl_ & MADCTL_MV), YESNO(this->madctl_ & (MADCTL_MX | MADCTL_XFLIP)),
+                    YESNO(this->madctl_ & (MADCTL_MY | MADCTL_YFLIP)), YESNO(this->invert_colors_),
+                    this->madctl_ & MADCTL_BGR ? "BGR" : "RGB", DISPLAYPIXEL * 8, IS_BIG_ENDIAN ? "Big" : "Little");
+    if (this->brightness_.has_value())
+      esph_log_config(TAG, "  Brightness: %u", this->brightness_.value());
+    log_pin(TAG, "  CS Pin: ", this->cs_);
+    log_pin(TAG, "  Reset Pin: ", this->reset_pin_);
+    log_pin(TAG, "  DC Pin: ", this->dc_pin_);
+    esph_log_config(TAG,
+                    "  SPI Mode: %d\n"
+                    "  SPI Data rate: %dMHz\n"
+                    "  SPI Bus width: %d",
+                    this->mode_, static_cast<unsigned>(this->data_rate_ / 1000000), BUS_TYPE);
   }
 
  protected:

esphome/components/pmsx003/pmsx003.cpp

@@ -181,20 +181,17 @@ optional<bool> PMSX003Component::check_byte_() {
 bool PMSX003Component::check_payload_length_(uint16_t payload_length) {
   // https://avaldebe.github.io/PyPMS/sensors/Plantower/
   switch (this->type_) {
-    case Type::PMS1003:
-      return payload_length == 28;  // 2*13+2
-    case Type::PMS3003:             // Data 7/8/9 not set/reserved
-      return payload_length == 20;  // 2*9+2
-    case Type::PMSX003:             // Data 13 not set/reserved
-      // Deprecated: Length 20 is for PMS3003 backwards compatibility
+    case Type::PMSX003:
+      // The expected payload length is typically 28 bytes.
+      // However, a 20-byte payload check was already present in the code.
+      // No official documentation was found confirming this.
+      // Retaining this check to avoid breaking existing behavior.
       return payload_length == 28 || payload_length == 20;  // 2*13+2
     case Type::PMS5003S:
-    case Type::PMS5003T:            // Data 13 not set/reserved
-      return payload_length == 28;  // 2*13+2
-    case Type::PMS5003ST:           // Data 16 not set/reserved
-      return payload_length == 36;  // 2*17+2
-    case Type::PMS9003M:
-      return payload_length == 28;  // 2*13+2
+    case Type::PMS5003T:
+      return payload_length == 28;  // 2*13+2 (Data 13 not set/reserved)
+    case Type::PMS5003ST:
+      return payload_length == 36;  // 2*17+2 (Data 16 not set/reserved)
   }
   return false;
 }
@@ -317,10 +314,9 @@ void PMSX003Component::parse_data_() {
   }
 
   // Firmware Version and Error Code
-  if (this->type_ == Type::PMS1003 || this->type_ == Type::PMS5003ST || this->type_ == Type::PMS9003M) {
-    const uint8_t firmware_error_code_offset = (this->type_ == Type::PMS5003ST) ? 36 : 28;
-    const uint8_t firmware_version = this->data_[firmware_error_code_offset];
-    const uint8_t error_code = this->data_[firmware_error_code_offset + 1];
+  if (this->type_ == Type::PMS5003ST) {
+    const uint8_t firmware_version = this->data_[36];
+    const uint8_t error_code = this->data_[37];
 
     ESP_LOGD(TAG, "Got Firmware Version: 0x%02X, Error Code: 0x%02X", firmware_version, error_code);
   }

esphome/components/pmsx003/pmsx003.h

@@ -8,13 +8,10 @@
 namespace esphome::pmsx003 {
 
 enum class Type : uint8_t {
-  PMS1003 = 0,
-  PMS3003,
-  PMSX003,  // PMS5003, PMS6003, PMS7003, PMSA003 (NOT PMSA003I - see `pmsa003i` component)
+  PMSX003 = 0,
   PMS5003S,
   PMS5003T,
   PMS5003ST,
-  PMS9003M,
 };
 
 enum class Command : uint8_t {

esphome/components/pmsx003/sensor.py

@@ -40,127 +40,33 @@ pmsx003_ns = cg.esphome_ns.namespace("pmsx003")
 PMSX003Component = pmsx003_ns.class_("PMSX003Component", uart.UARTDevice, cg.Component)
 PMSX003Sensor = pmsx003_ns.class_("PMSX003Sensor", sensor.Sensor)
 
-TYPE_PMS1003 = "PMS1003"
-TYPE_PMS3003 = "PMS3003"
-TYPE_PMSX003 = "PMSX003"  # PMS5003, PMS6003, PMS7003, PMSA003 (NOT PMSA003I - see `pmsa003i` component)
+TYPE_PMSX003 = "PMSX003"
 TYPE_PMS5003S = "PMS5003S"
 TYPE_PMS5003T = "PMS5003T"
 TYPE_PMS5003ST = "PMS5003ST"
-TYPE_PMS9003M = "PMS9003M"
 
 Type = pmsx003_ns.enum("Type", is_class=True)
 
 PMSX003_TYPES = {
-    TYPE_PMS1003: Type.PMS1003,
-    TYPE_PMS3003: Type.PMS3003,
     TYPE_PMSX003: Type.PMSX003,
     TYPE_PMS5003S: Type.PMS5003S,
     TYPE_PMS5003T: Type.PMS5003T,
     TYPE_PMS5003ST: Type.PMS5003ST,
-    TYPE_PMS9003M: Type.PMS9003M,
 }
 
 SENSORS_TO_TYPE = {
-    CONF_PM_1_0_STD: [
-        TYPE_PMS1003,
-        TYPE_PMS3003,
-        TYPE_PMSX003,
-        TYPE_PMS5003S,
-        TYPE_PMS5003T,
-        TYPE_PMS5003ST,
-        TYPE_PMS9003M,
-    ],
-    CONF_PM_2_5_STD: [
-        TYPE_PMS1003,
-        TYPE_PMS3003,
-        TYPE_PMSX003,
-        TYPE_PMS5003S,
-        TYPE_PMS5003T,
-        TYPE_PMS5003ST,
-        TYPE_PMS9003M,
-    ],
-    CONF_PM_10_0_STD: [
-        TYPE_PMS1003,
-        TYPE_PMS3003,
-        TYPE_PMSX003,
-        TYPE_PMS5003S,
-        TYPE_PMS5003T,
-        TYPE_PMS5003ST,
-        TYPE_PMS9003M,
-    ],
-    CONF_PM_1_0: [
-        TYPE_PMS1003,
-        TYPE_PMS3003,
-        TYPE_PMSX003,
-        TYPE_PMS5003S,
-        TYPE_PMS5003T,
-        TYPE_PMS5003ST,
-        TYPE_PMS9003M,
-    ],
-    CONF_PM_2_5: [
-        TYPE_PMS1003,
-        TYPE_PMS3003,
-        TYPE_PMSX003,
-        TYPE_PMS5003S,
-        TYPE_PMS5003T,
-        TYPE_PMS5003ST,
-        TYPE_PMS9003M,
-    ],
-    CONF_PM_10_0: [
-        TYPE_PMS1003,
-        TYPE_PMS3003,
-        TYPE_PMSX003,
-        TYPE_PMS5003S,
-        TYPE_PMS5003T,
-        TYPE_PMS5003ST,
-        TYPE_PMS9003M,
-    ],
-    CONF_PM_0_3UM: [
-        TYPE_PMS1003,
-        TYPE_PMSX003,
-        TYPE_PMS5003S,
-        TYPE_PMS5003T,
-        TYPE_PMS5003ST,
-        TYPE_PMS9003M,
-    ],
-    CONF_PM_0_5UM: [
-        TYPE_PMS1003,
-        TYPE_PMSX003,
-        TYPE_PMS5003S,
-        TYPE_PMS5003T,
-        TYPE_PMS5003ST,
-        TYPE_PMS9003M,
-    ],
-    CONF_PM_1_0UM: [
-        TYPE_PMS1003,
-        TYPE_PMSX003,
-        TYPE_PMS5003S,
-        TYPE_PMS5003T,
-        TYPE_PMS5003ST,
-        TYPE_PMS9003M,
-    ],
-    CONF_PM_2_5UM: [
-        TYPE_PMS1003,
-        TYPE_PMSX003,
-        TYPE_PMS5003S,
-        TYPE_PMS5003T,
-        TYPE_PMS5003ST,
-        TYPE_PMS9003M,
-    ],
-    CONF_PM_5_0UM: [
-        TYPE_PMS1003,
-        TYPE_PMSX003,
-        TYPE_PMS5003S,
-        TYPE_PMS5003ST,
-        TYPE_PMS9003M,
-    ],
-    CONF_PM_10_0UM: [
-        TYPE_PMS1003,
-        TYPE_PMSX003,
-        TYPE_PMS5003S,
-        TYPE_PMS5003ST,
-        TYPE_PMS9003M,
-    ],
+    CONF_PM_1_0_STD: [TYPE_PMSX003, TYPE_PMS5003S, TYPE_PMS5003T, TYPE_PMS5003ST],
+    CONF_PM_2_5_STD: [TYPE_PMSX003, TYPE_PMS5003S, TYPE_PMS5003T, TYPE_PMS5003ST],
+    CONF_PM_10_0_STD: [TYPE_PMSX003, TYPE_PMS5003S, TYPE_PMS5003T, TYPE_PMS5003ST],
+    CONF_PM_1_0: [TYPE_PMSX003, TYPE_PMS5003S, TYPE_PMS5003T, TYPE_PMS5003ST],
+    CONF_PM_2_5: [TYPE_PMSX003, TYPE_PMS5003S, TYPE_PMS5003T, TYPE_PMS5003ST],
+    CONF_PM_10_0: [TYPE_PMSX003, TYPE_PMS5003S, TYPE_PMS5003T, TYPE_PMS5003ST],
+    CONF_PM_0_3UM: [TYPE_PMSX003, TYPE_PMS5003S, TYPE_PMS5003T, TYPE_PMS5003ST],
+    CONF_PM_0_5UM: [TYPE_PMSX003, TYPE_PMS5003S, TYPE_PMS5003T, TYPE_PMS5003ST],
+    CONF_PM_1_0UM: [TYPE_PMSX003, TYPE_PMS5003S, TYPE_PMS5003T, TYPE_PMS5003ST],
+    CONF_PM_2_5UM: [TYPE_PMSX003, TYPE_PMS5003S, TYPE_PMS5003T, TYPE_PMS5003ST],
+    CONF_PM_5_0UM: [TYPE_PMSX003, TYPE_PMS5003S, TYPE_PMS5003ST],
+    CONF_PM_10_0UM: [TYPE_PMSX003, TYPE_PMS5003S, TYPE_PMS5003ST],
     CONF_FORMALDEHYDE: [TYPE_PMS5003S, TYPE_PMS5003ST],
     CONF_TEMPERATURE: [TYPE_PMS5003T, TYPE_PMS5003ST],
     CONF_HUMIDITY: [TYPE_PMS5003T, TYPE_PMS5003ST],

esphome/components/time/real_time_clock.h

@@ -62,7 +62,7 @@ class RealTimeClock : public PollingComponent {
   void apply_timezone_();
 #endif
 
-  LazyCallbackManager<void()> time_sync_callback_;
+  CallbackManager<void()> time_sync_callback_;
 };
 
 template<typename... Ts> class TimeHasTimeCondition : public Condition<Ts...> {

tests/components/mipi_spi/test.esp8266-ard.yaml

@@ -1,10 +0,0 @@
-substitutions:
-  dc_pin: GPIO15
-  cs_pin: GPIO5
-  enable_pin: GPIO4
-  reset_pin: GPIO16
-
-packages:
-  spi: !include ../../test_build_components/common/spi/esp8266-ard.yaml
-
-<<: !include common.yaml