Update esphome/components/sml/sml_parser.cpp

Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>

esphome/analyze_memory/const.py

@@ -9,44 +9,10 @@ ESPHOME_COMPONENT_PATTERN = re.compile(r"esphome::([a-zA-Z0-9_]+)::")
 # Maps standard section names to their various platform-specific variants
 # Note: Order matters! More specific patterns (.bss) must come before general ones (.dram)
 # because ESP-IDF uses names like ".dram0.bss" which would match ".dram" otherwise
-#
-# Platform-specific sections:
-# - ESP8266/ESP32: .iram*, .dram*
-# - LibreTiny RTL87xx: .xip.code_* (flash), .ram.code_* (RAM)
-# - LibreTiny BK7231: .itcm.code (fast RAM), .vectors (interrupt vectors)
-# - LibreTiny LN882X: .flash_text, .flash_copy* (flash code)
 SECTION_MAPPING = {
-    ".text": frozenset(
-        [
-            ".text",
-            ".iram",
-            # LibreTiny RTL87xx XIP (eXecute In Place) flash code
-            ".xip.code",
-            # LibreTiny RTL87xx RAM code
-            ".ram.code_text",
-            # LibreTiny BK7231 fast RAM code and vectors
-            ".itcm.code",
-            ".vectors",
-            # LibreTiny LN882X flash code
-            ".flash_text",
-            ".flash_copy",
-        ]
-    ),
-    ".rodata": frozenset(
-        [
-            ".rodata",
-            # LibreTiny RTL87xx read-only data in RAM
-            ".ram.code_rodata",
-        ]
-    ),
-    # .bss patterns - must be before .data to catch ".dram0.bss"
-    ".bss": frozenset(
-        [
-            ".bss",
-            # LibreTiny LN882X BSS
-            ".bss_ram",
-        ]
-    ),
+    ".text": frozenset([".text", ".iram"]),
+    ".rodata": frozenset([".rodata"]),
+    ".bss": frozenset([".bss"]),  # Must be before .data to catch ".dram0.bss"
     ".data": frozenset([".data", ".dram"]),
 }
 

esphome/components/alarm_control_panel/alarm_control_panel.cpp

@@ -31,8 +31,7 @@ void AlarmControlPanel::publish_state(AlarmControlPanelState state) {
   this->last_update_ = millis();
   if (state != this->current_state_) {
     auto prev_state = this->current_state_;
-    ESP_LOGD(TAG, "'%s' >> %s (was %s)", this->get_name().c_str(),
-             LOG_STR_ARG(alarm_control_panel_state_to_string(state)),
+    ESP_LOGD(TAG, "Set state to: %s, previous: %s", LOG_STR_ARG(alarm_control_panel_state_to_string(state)),
              LOG_STR_ARG(alarm_control_panel_state_to_string(prev_state)));
     this->current_state_ = state;
     // Single state callback - triggers check get_state() for specific states

esphome/components/api/api_server.cpp

@@ -241,10 +241,8 @@ void APIServer::handle_disconnect(APIConnection *conn) {}
   void APIServer::on_##entity_name##_update(entity_type *obj) { /* NOLINT(bugprone-macro-parentheses) */ \
     if (obj->is_internal()) \
       return; \
-    for (auto &c : this->clients_) { \
-      if (c->flags_.state_subscription) \
-        c->send_##entity_name##_state(obj); \
-    } \
+    for (auto &c : this->clients_) \
+      c->send_##entity_name##_state(obj); \
   }
 
 #ifdef USE_BINARY_SENSOR
@@ -323,10 +321,8 @@ API_DISPATCH_UPDATE(water_heater::WaterHeater, water_heater)
 void APIServer::on_event(event::Event *obj) {
   if (obj->is_internal())
     return;
-  for (auto &c : this->clients_) {
-    if (c->flags_.state_subscription)
-      c->send_event(obj);
-  }
+  for (auto &c : this->clients_)
+    c->send_event(obj);
 }
 #endif
 
@@ -335,10 +331,8 @@ void APIServer::on_event(event::Event *obj) {
 void APIServer::on_update(update::UpdateEntity *obj) {
   if (obj->is_internal())
     return;
-  for (auto &c : this->clients_) {
-    if (c->flags_.state_subscription)
-      c->send_update_state(obj);
-  }
+  for (auto &c : this->clients_)
+    c->send_update_state(obj);
 }
 #endif
 

esphome/components/binary_sensor/binary_sensor.cpp

@@ -44,7 +44,7 @@ bool BinarySensor::set_new_state(const optional<bool> &new_state) {
 #if defined(USE_BINARY_SENSOR) && defined(USE_CONTROLLER_REGISTRY)
     ControllerRegistry::notify_binary_sensor_update(this);
 #endif
-    ESP_LOGD(TAG, "'%s' >> %s", this->get_name().c_str(), ONOFFMAYBE(new_state));
+    ESP_LOGD(TAG, "'%s': %s", this->get_name().c_str(), ONOFFMAYBE(new_state));
     return true;
   }
   return false;

esphome/components/captive_portal/__init__.py

@@ -44,7 +44,7 @@ CONFIG_SCHEMA = cv.All(
             cv.GenerateID(CONF_WEB_SERVER_BASE_ID): cv.use_id(
                 web_server_base.WebServerBase
             ),
-            cv.Optional(CONF_COMPRESSION, default="gzip"): cv.one_of("gzip", "br"),
+            cv.Optional(CONF_COMPRESSION, default="br"): cv.one_of("br", "gzip"),
         }
     ).extend(cv.COMPONENT_SCHEMA),
     cv.only_on(

esphome/components/climate/climate.cpp

@@ -436,7 +436,7 @@ void Climate::save_state_() {
 }
 
 void Climate::publish_state() {
-  ESP_LOGD(TAG, "'%s' >>", this->name_.c_str());
+  ESP_LOGD(TAG, "'%s' - Sending state:", this->name_.c_str());
   auto traits = this->get_traits();
 
   ESP_LOGD(TAG, "  Mode: %s", LOG_STR_ARG(climate_mode_to_string(this->mode)));

esphome/components/cover/cover.cpp

@@ -153,7 +153,7 @@ void Cover::publish_state(bool save) {
   this->position = clamp(this->position, 0.0f, 1.0f);
   this->tilt = clamp(this->tilt, 0.0f, 1.0f);
 
-  ESP_LOGD(TAG, "'%s' >>", this->name_.c_str());
+  ESP_LOGD(TAG, "'%s' - Publishing:", this->name_.c_str());
   auto traits = this->get_traits();
   if (traits.get_supports_position()) {
     ESP_LOGD(TAG, "  Position: %.0f%%", this->position * 100.0f);

esphome/components/datetime/date_entity.cpp

@@ -30,7 +30,7 @@ void DateEntity::publish_state() {
     return;
   }
   this->set_has_state(true);
-  ESP_LOGD(TAG, "'%s' >> %d-%d-%d", this->get_name().c_str(), this->year_, this->month_, this->day_);
+  ESP_LOGD(TAG, "'%s': Sending date %d-%d-%d", this->get_name().c_str(), this->year_, this->month_, this->day_);
   this->state_callback_.call();
 #if defined(USE_DATETIME_DATE) && defined(USE_CONTROLLER_REGISTRY)
   ControllerRegistry::notify_date_update(this);

esphome/components/datetime/datetime_entity.cpp

@@ -45,8 +45,8 @@ void DateTimeEntity::publish_state() {
     return;
   }
   this->set_has_state(true);
-  ESP_LOGD(TAG, "'%s' >> %04u-%02u-%02u %02d:%02d:%02d", this->get_name().c_str(), this->year_, this->month_,
-           this->day_, this->hour_, this->minute_, this->second_);
+  ESP_LOGD(TAG, "'%s': Sending datetime %04u-%02u-%02u %02d:%02d:%02d", this->get_name().c_str(), this->year_,
+           this->month_, this->day_, this->hour_, this->minute_, this->second_);
   this->state_callback_.call();
 #if defined(USE_DATETIME_DATETIME) && defined(USE_CONTROLLER_REGISTRY)
   ControllerRegistry::notify_datetime_update(this);

esphome/components/datetime/time_entity.cpp

@@ -26,7 +26,8 @@ void TimeEntity::publish_state() {
     return;
   }
   this->set_has_state(true);
-  ESP_LOGD(TAG, "'%s' >> %02d:%02d:%02d", this->get_name().c_str(), this->hour_, this->minute_, this->second_);
+  ESP_LOGD(TAG, "'%s': Sending time %02d:%02d:%02d", this->get_name().c_str(), this->hour_, this->minute_,
+           this->second_);
   this->state_callback_.call();
 #if defined(USE_DATETIME_TIME) && defined(USE_CONTROLLER_REGISTRY)
   ControllerRegistry::notify_time_update(this);

esphome/components/debug/sensor.py

@@ -17,11 +17,7 @@ from esphome.const import (
     UNIT_PERCENT,
 )
 
-from . import (  # noqa: F401  pylint: disable=unused-import
-    CONF_DEBUG_ID,
-    FILTER_SOURCE_FILES,
-    DebugComponent,
-)
+from . import CONF_DEBUG_ID, DebugComponent
 
 DEPENDENCIES = ["debug"]
 

esphome/components/debug/text_sensor.py

@@ -8,11 +8,7 @@ from esphome.const import (
     ICON_RESTART,
 )
 
-from . import (  # noqa: F401  pylint: disable=unused-import
-    CONF_DEBUG_ID,
-    FILTER_SOURCE_FILES,
-    DebugComponent,
-)
+from . import CONF_DEBUG_ID, DebugComponent
 
 DEPENDENCIES = ["debug"]
 

esphome/components/esp32_hosted/update/esp32_hosted_update.cpp

@@ -294,7 +294,8 @@ bool Esp32HostedUpdate::stream_firmware_to_coprocessor_() {
   }
 
   // Stream firmware to coprocessor while computing SHA256
-  sha256::SHA256 hasher;
+  // Hardware SHA acceleration requires 32-byte alignment on some chips (ESP32-S3 with IDF 5.5.x+)
+  alignas(32) sha256::SHA256 hasher;
   hasher.init();
 
   uint8_t buffer[CHUNK_SIZE];
@@ -351,7 +352,8 @@ bool Esp32HostedUpdate::write_embedded_firmware_to_coprocessor_() {
   }
 
   // Verify SHA256 before writing
-  sha256::SHA256 hasher;
+  // Hardware SHA acceleration requires 32-byte alignment on some chips (ESP32-S3 with IDF 5.5.x+)
+  alignas(32) sha256::SHA256 hasher;
   hasher.init();
   hasher.add(this->firmware_data_, this->firmware_size_);
   hasher.calculate();

esphome/components/esphome/ota/ota_esphome.cpp

@@ -563,9 +563,11 @@ bool ESPHomeOTAComponent::handle_auth_send_() {
     //   [1+hex_size...1+2*hex_size-1]: cnonce (hex_size bytes) - client's nonce
     //   [1+2*hex_size...1+3*hex_size-1]: response (hex_size bytes) - client's hash
 
-    // CRITICAL ESP32-S2/S3 HARDWARE SHA ACCELERATION: Hash object must stay in same stack frame
+    // CRITICAL ESP32-S3 HARDWARE SHA ACCELERATION: Hash object must stay in same stack frame
     // (no passing to other functions). All hash operations must happen in this function.
-    sha256::SHA256 hasher;
+    // NOTE: On ESP32-S3 with IDF 5.5.x, the SHA256 context must be properly aligned for
+    // hardware SHA acceleration DMA operations.
+    alignas(32) sha256::SHA256 hasher;
 
     const size_t hex_size = hasher.get_size() * 2;
     const size_t nonce_len = hasher.get_size() / 4;
@@ -637,9 +639,11 @@ bool ESPHomeOTAComponent::handle_auth_read_() {
   const char *cnonce = nonce + hex_size;
   const char *response = cnonce + hex_size;
 
-  // CRITICAL ESP32-S2/S3 HARDWARE SHA ACCELERATION: Hash object must stay in same stack frame
+  // CRITICAL ESP32-S3 HARDWARE SHA ACCELERATION: Hash object must stay in same stack frame
   // (no passing to other functions). All hash operations must happen in this function.
-  sha256::SHA256 hasher;
+  // NOTE: On ESP32-S3 with IDF 5.5.x, the SHA256 context must be properly aligned for
+  // hardware SHA acceleration DMA operations.
+  alignas(32) sha256::SHA256 hasher;
 
   hasher.init();
   hasher.add(this->password_.c_str(), this->password_.length());

esphome/components/event/event.cpp

@@ -22,7 +22,7 @@ void Event::trigger(const std::string &event_type) {
     return;
   }
   this->last_event_type_ = found;
-  ESP_LOGD(TAG, "'%s' >> '%s'", this->get_name().c_str(), this->last_event_type_);
+  ESP_LOGD(TAG, "'%s' Triggered event '%s'", this->get_name().c_str(), this->last_event_type_);
   this->event_callback_.call(event_type);
 #if defined(USE_EVENT) && defined(USE_CONTROLLER_REGISTRY)
   ControllerRegistry::notify_event(this);

esphome/components/fan/fan.cpp

@@ -201,7 +201,7 @@ void Fan::publish_state() {
   auto traits = this->get_traits();
 
   ESP_LOGD(TAG,
-           "'%s' >>\n"
+           "'%s' - Sending state:\n"
            "  State: %s",
            this->name_.c_str(), ONOFF(this->state));
   if (traits.supports_speed()) {

esphome/components/image/__init__.py

@@ -665,10 +665,15 @@ async def write_image(config, all_frames=False):
         if is_svg_file(path):
             import resvg_py
 
-            resize = resize or (None, None)
-            image_data = resvg_py.svg_to_bytes(
-                svg_path=str(path), width=resize[0], height=resize[1], dpi=100
-            )
+            if resize:
+                width, height = resize
+                # resvg-py allows rendering by width/height directly
+                image_data = resvg_py.svg_to_bytes(
+                    svg_path=str(path), width=int(width), height=int(height)
+                )
+            else:
+                # Default size
+                image_data = resvg_py.svg_to_bytes(svg_path=str(path))
 
             # Convert bytes to Pillow Image
             image = Image.open(io.BytesIO(image_data))

esphome/components/lock/lock.cpp

@@ -52,7 +52,7 @@ void Lock::publish_state(LockState state) {
 
   this->state = state;
   this->rtc_.save(&this->state);
-  ESP_LOGD(TAG, "'%s' >> %s", this->name_.c_str(), LOG_STR_ARG(lock_state_to_string(state)));
+  ESP_LOGD(TAG, "'%s': Sending state %s", this->name_.c_str(), LOG_STR_ARG(lock_state_to_string(state)));
   this->state_callback_.call();
 #if defined(USE_LOCK) && defined(USE_CONTROLLER_REGISTRY)
   ControllerRegistry::notify_lock_update(this);

esphome/components/lvgl/lv_validation.py

@@ -413,7 +413,6 @@ class TextValidator(LValidator):
                 str_args = [str(x) for x in value[CONF_ARGS]]
                 arg_expr = cg.RawExpression(",".join(str_args))
                 format_str = cpp_string_escape(format_str)
-                # str_sprintf justified: user-defined format, can't optimize without permanent RAM cost
                 sprintf_str = f"str_sprintf({format_str}, {arg_expr}).c_str()"
                 if nanval := value.get(CONF_IF_NAN):
                     nanval = cpp_string_escape(nanval)

esphome/components/lvgl/lvgl_esphome.cpp

@@ -65,10 +65,7 @@ std::string lv_event_code_name_for(uint8_t event_code) {
   if (event_code < sizeof(EVENT_NAMES) / sizeof(EVENT_NAMES[0])) {
     return EVENT_NAMES[event_code];
   }
-  // max 4 bytes: "%u" with uint8_t (max 255, 3 digits) + null
-  char buf[4];
-  snprintf(buf, sizeof(buf), "%u", event_code);
-  return buf;
+  return str_sprintf("%2d", event_code);
 }
 
 static void rounder_cb(lv_disp_drv_t *disp_drv, lv_area_t *area) {

esphome/components/nextion/display.py

@@ -11,12 +11,7 @@ from esphome.const import (
 )
 from esphome.core import CORE, TimePeriod
 
-from . import (  # noqa: F401  pylint: disable=unused-import
-    FILTER_SOURCE_FILES,
-    Nextion,
-    nextion_ns,
-    nextion_ref,
-)
+from . import Nextion, nextion_ns, nextion_ref
 from .base_component import (
     CONF_AUTO_WAKE_ON_TOUCH,
     CONF_COMMAND_SPACING,

esphome/components/number/number.cpp

@@ -31,7 +31,7 @@ void log_number(const char *tag, const char *prefix, const char *type, Number *o
 void Number::publish_state(float state) {
   this->set_has_state(true);
   this->state = state;
-  ESP_LOGD(TAG, "'%s' >> %.2f", this->get_name().c_str(), state);
+  ESP_LOGD(TAG, "'%s': Sending state %f", this->get_name().c_str(), state);
   this->state_callback_.call(state);
 #if defined(USE_NUMBER) && defined(USE_CONTROLLER_REGISTRY)
   ControllerRegistry::notify_number_update(this);

esphome/components/qr_code/qr_code.cpp

@@ -27,16 +27,7 @@ void QrCode::set_ecc(qrcodegen_Ecc ecc) {
 
 void QrCode::generate_qr_code() {
   ESP_LOGV(TAG, "Generating QR code");
-
-#ifdef USE_ESP32
-  // ESP32 has 8KB stack, safe to allocate ~4KB buffer on stack
   uint8_t tempbuffer[qrcodegen_BUFFER_LEN_MAX];
-#else
-  // Other platforms (ESP8266: 4KB, RP2040: 2KB, LibreTiny: ~4KB) have smaller stacks
-  // Allocate buffer on heap to avoid stack overflow
-  auto tempbuffer_owner = std::make_unique<uint8_t[]>(qrcodegen_BUFFER_LEN_MAX);
-  uint8_t *tempbuffer = tempbuffer_owner.get();
-#endif
 
   if (!qrcodegen_encodeText(this->value_.c_str(), tempbuffer, this->qr_, this->ecc_, qrcodegen_VERSION_MIN,
                             qrcodegen_VERSION_MAX, qrcodegen_Mask_AUTO, true)) {

esphome/components/remote_receiver/binary_sensor.py

@@ -1,7 +1,5 @@
 from esphome.components import binary_sensor, remote_base
 
-from . import FILTER_SOURCE_FILES  # noqa: F401  pylint: disable=unused-import
-
 DEPENDENCIES = ["remote_receiver"]
 
 CONFIG_SCHEMA = remote_base.validate_binary_sensor

esphome/components/safe_mode/safe_mode.cpp

@@ -9,7 +9,7 @@
 #include <cinttypes>
 #include <cstdio>
 
-#if defined(USE_ESP32) && defined(USE_OTA_ROLLBACK)
+#ifdef USE_OTA_ROLLBACK
 #include <esp_ota_ops.h>
 #endif
 
@@ -26,17 +26,6 @@ void SafeModeComponent::dump_config() {
                 this->safe_mode_boot_is_good_after_ / 1000,  // because milliseconds
                 this->safe_mode_num_attempts_,
                 this->safe_mode_enable_time_ / 1000);  // because milliseconds
-#if defined(USE_ESP32) && defined(USE_OTA_ROLLBACK)
-  const char *state_str;
-  if (this->ota_state_ == ESP_OTA_IMG_NEW) {
-    state_str = "not supported";
-  } else if (this->ota_state_ == ESP_OTA_IMG_PENDING_VERIFY) {
-    state_str = "supported";
-  } else {
-    state_str = "support unknown";
-  }
-  ESP_LOGCONFIG(TAG, "  Bootloader rollback: %s", state_str);
-#endif
 
   if (this->safe_mode_rtc_value_ > 1 && this->safe_mode_rtc_value_ != SafeModeComponent::ENTER_SAFE_MODE_MAGIC) {
     auto remaining_restarts = this->safe_mode_num_attempts_ - this->safe_mode_rtc_value_;
@@ -47,7 +36,7 @@ void SafeModeComponent::dump_config() {
     }
   }
 
-#if defined(USE_ESP32) && defined(USE_OTA_ROLLBACK)
+#ifdef USE_OTA_ROLLBACK
   const esp_partition_t *last_invalid = esp_ota_get_last_invalid_partition();
   if (last_invalid != nullptr) {
     ESP_LOGW(TAG,
@@ -66,7 +55,7 @@ void SafeModeComponent::loop() {
     ESP_LOGI(TAG, "Boot seems successful; resetting boot loop counter");
     this->clean_rtc();
     this->boot_successful_ = true;
-#if defined(USE_ESP32) && defined(USE_OTA_ROLLBACK)
+#ifdef USE_OTA_ROLLBACK
     // Mark OTA partition as valid to prevent rollback
     esp_ota_mark_app_valid_cancel_rollback();
 #endif
@@ -101,12 +90,6 @@ bool SafeModeComponent::should_enter_safe_mode(uint8_t num_attempts, uint32_t en
   this->safe_mode_num_attempts_ = num_attempts;
   this->rtc_ = global_preferences->make_preference<uint32_t>(233825507UL, false);
 
-#if defined(USE_ESP32) && defined(USE_OTA_ROLLBACK)
-  // Check partition state to detect if bootloader supports rollback
-  const esp_partition_t *running = esp_ota_get_running_partition();
-  esp_ota_get_state_partition(running, &this->ota_state_);
-#endif
-
   uint32_t rtc_val = this->read_rtc_();
   this->safe_mode_rtc_value_ = rtc_val;
 

esphome/components/safe_mode/safe_mode.h

@@ -5,10 +5,6 @@
 #include "esphome/core/helpers.h"
 #include "esphome/core/preferences.h"
 
-#if defined(USE_ESP32) && defined(USE_OTA_ROLLBACK)
-#include <esp_ota_ops.h>
-#endif
-
 namespace esphome::safe_mode {
 
 /// SafeModeComponent provides a safe way to recover from repeated boot failures
@@ -46,9 +42,6 @@ class SafeModeComponent : public Component {
   // Group 1-byte members together to minimize padding
   bool boot_successful_{false};  ///< set to true after boot is considered successful
   uint8_t safe_mode_num_attempts_{0};
-#if defined(USE_ESP32) && defined(USE_OTA_ROLLBACK)
-  esp_ota_img_states_t ota_state_{ESP_OTA_IMG_UNDEFINED};
-#endif
   // Larger objects at the end
   ESPPreferenceObject rtc_;
 #ifdef USE_SAFE_MODE_CALLBACK

esphome/components/select/select.cpp

@@ -31,7 +31,7 @@ void Select::publish_state(size_t index) {
 #pragma GCC diagnostic ignored "-Wdeprecated-declarations"
   this->state = option;  // Update deprecated member for backward compatibility
 #pragma GCC diagnostic pop
-  ESP_LOGD(TAG, "'%s' >> %s (%zu)", this->get_name().c_str(), option, index);
+  ESP_LOGD(TAG, "'%s': Sending state %s (index %zu)", this->get_name().c_str(), option, index);
   this->state_callback_.call(index);
 #if defined(USE_SELECT) && defined(USE_CONTROLLER_REGISTRY)
   ControllerRegistry::notify_select_update(this);

esphome/components/sensor/sensor.cpp

@@ -126,8 +126,8 @@ float Sensor::get_raw_state() const { return this->raw_state; }
 void Sensor::internal_send_state_to_frontend(float state) {
   this->set_has_state(true);
   this->state = state;
-  ESP_LOGD(TAG, "'%s' >> %.*f %s", this->get_name().c_str(), std::max(0, (int) this->get_accuracy_decimals()), state,
-           this->get_unit_of_measurement_ref().c_str());
+  ESP_LOGD(TAG, "'%s': Sending state %.5f %s with %d decimals of accuracy", this->get_name().c_str(), state,
+           this->get_unit_of_measurement_ref().c_str(), this->get_accuracy_decimals());
   this->callback_.call(state);
 #if defined(USE_SENSOR) && defined(USE_CONTROLLER_REGISTRY)
   ControllerRegistry::notify_sensor_update(this);

esphome/components/sha256/sha256.cpp

@@ -10,24 +10,26 @@ namespace esphome::sha256 {
 
 #if defined(USE_ESP32) || defined(USE_LIBRETINY)
 
-// CRITICAL ESP32 HARDWARE SHA ACCELERATION REQUIREMENTS (IDF 5.5.x):
+// CRITICAL ESP32-S3 HARDWARE SHA ACCELERATION REQUIREMENTS (IDF 5.5.x):
 //
-// ESP32 variants (except original ESP32) use DMA-based hardware SHA acceleration that requires
-// 32-byte aligned digest buffers. This is handled automatically via HashBase::digest_ which has
-// alignas(32) on these platforms. Two additional constraints apply:
+// The ESP32-S3 uses hardware DMA for SHA acceleration. The mbedtls_sha256_context structure contains
+// internal state that the DMA engine references. This imposes three critical constraints:
 //
-// 1. NO VARIABLE LENGTH ARRAYS (VLAs): VLAs corrupt the stack layout, causing the DMA engine to
+// 1. ALIGNMENT: The SHA256 object MUST be declared with `alignas(32)` for proper DMA alignment.
+//    Without this, the DMA engine may crash with an abort in sha_hal_read_digest().
+//
+// 2. NO VARIABLE LENGTH ARRAYS (VLAs): VLAs corrupt the stack layout, causing the DMA engine to
 //    write to incorrect memory locations. This results in null pointer dereferences and crashes.
 //    ALWAYS use fixed-size arrays (e.g., char buf[65], not char buf[size+1]).
 //
-// 2. SAME STACK FRAME ONLY: The SHA256 object must be created and used entirely within the same
+// 3. SAME STACK FRAME ONLY: The SHA256 object must be created and used entirely within the same
 //    function. NEVER pass the SHA256 object or HashBase pointer to another function. When the stack
 //    frame changes (function call/return), the DMA references become invalid and will produce
 //    truncated hash output (20 bytes instead of 32) or corrupt memory.
 //
 // CORRECT USAGE:
 //   void my_function() {
-//     sha256::SHA256 hasher;
+//     alignas(32) sha256::SHA256 hasher;  // Created locally with proper alignment
 //     hasher.init();
 //     hasher.add(data, len);  // Any size, no chunking needed
 //     hasher.calculate();
@@ -35,9 +37,9 @@ namespace esphome::sha256 {
 //     // hasher destroyed when function returns
 //   }
 //
-// INCORRECT USAGE (WILL FAIL):
+// INCORRECT USAGE (WILL FAIL ON ESP32-S3):
 //   void my_function() {
-//     sha256::SHA256 hasher;
+//     sha256::SHA256 hasher;  // WRONG: Missing alignas(32)
 //     helper(&hasher);  // WRONG: Passed to different stack frame
 //   }
 //   void helper(HashBase *h) {

esphome/components/sha256/sha256.h

@@ -24,14 +24,13 @@ namespace esphome::sha256 {
 
 /// SHA256 hash implementation.
 ///
-/// CRITICAL for ESP32 variants (except original) with IDF 5.5.x hardware SHA acceleration:
-/// 1. The object MUST stay in the same stack frame (no passing to other functions)
-/// 2. NO Variable Length Arrays (VLAs) in the same function
-///
-/// Note: Alignment is handled automatically via the HashBase::digest_ member.
+/// CRITICAL for ESP32-S3 with IDF 5.5.x hardware SHA acceleration:
+/// 1. SHA256 objects MUST be declared with `alignas(32)` for proper DMA alignment
+/// 2. The object MUST stay in the same stack frame (no passing to other functions)
+/// 3. NO Variable Length Arrays (VLAs) in the same function
 ///
 /// Example usage:
-///   sha256::SHA256 hasher;
+///   alignas(32) sha256::SHA256 hasher;
 ///   hasher.init();
 ///   hasher.add(data, len);
 ///   hasher.calculate();

esphome/components/sml/sml_parser.cpp

@@ -104,7 +104,10 @@ std::vector<ObisInfo> SmlFile::get_obis_info() {
 std::string bytes_repr(const BytesView &buffer) {
   std::string repr;
   for (auto const value : buffer) {
-    repr += str_sprintf("%02x", value & 0xff);
+    // max 3: 2 hex digits + null
+    char hex_buf[3];
+    snprintf(hex_buf, sizeof(hex_buf), "%02x", static_cast<unsigned int>(value));
+    repr += hex_buf;
   }
   return repr;
 }
@@ -146,7 +149,11 @@ ObisInfo::ObisInfo(const BytesView &server_id, const SmlNode &val_list_entry) :
 }
 
 std::string ObisInfo::code_repr() const {
-  return str_sprintf("%d-%d:%d.%d.%d", this->code[0], this->code[1], this->code[2], this->code[3], this->code[4]);
+  // max 20: "255-255:255.255.255" (19 chars) + null
+  char buf[20];
+  snprintf(buf, sizeof(buf), "%d-%d:%d.%d.%d", this->code[0], this->code[1], this->code[2], this->code[3],
+           this->code[4]);
+  return buf;
 }
 
 }  // namespace sml

esphome/components/sprinkler/sprinkler.cpp

@@ -332,7 +332,6 @@ Sprinkler::Sprinkler(const std::string &name) {
   // The `name` is needed to set timers up, hence non-default constructor
   // replaces `set_name()` method previously existed
   this->name_ = name;
-  this->timer_.init(2);
   this->timer_.push_back({this->name_ + "sm", false, 0, 0, std::bind(&Sprinkler::sm_timer_callback_, this)});
   this->timer_.push_back({this->name_ + "vs", false, 0, 0, std::bind(&Sprinkler::valve_selection_callback_, this)});
 }
@@ -1575,8 +1574,7 @@ const LogString *Sprinkler::state_as_str_(SprinklerState state) {
 
 void Sprinkler::start_timer_(const SprinklerTimerIndex timer_index) {
   if (this->timer_duration_(timer_index) > 0) {
-    // FixedVector ensures timer_ can't be resized, so .c_str() pointers remain valid
-    this->set_timeout(this->timer_[timer_index].name.c_str(), this->timer_duration_(timer_index),
+    this->set_timeout(this->timer_[timer_index].name, this->timer_duration_(timer_index),
                       this->timer_cbf_(timer_index));
     this->timer_[timer_index].start_time = millis();
     this->timer_[timer_index].active = true;
@@ -1587,7 +1585,7 @@ void Sprinkler::start_timer_(const SprinklerTimerIndex timer_index) {
 
 bool Sprinkler::cancel_timer_(const SprinklerTimerIndex timer_index) {
   this->timer_[timer_index].active = false;
-  return this->cancel_timeout(this->timer_[timer_index].name.c_str());
+  return this->cancel_timeout(this->timer_[timer_index].name);
 }
 
 bool Sprinkler::timer_active_(const SprinklerTimerIndex timer_index) { return this->timer_[timer_index].active; }

esphome/components/sprinkler/sprinkler.h

@@ -3,7 +3,6 @@
 #include "esphome/core/automation.h"
 #include "esphome/core/component.h"
 #include "esphome/core/hal.h"
-#include "esphome/core/helpers.h"
 #include "esphome/components/number/number.h"
 #include "esphome/components/switch/switch.h"
 
@@ -554,8 +553,8 @@ class Sprinkler : public Component {
   /// Sprinkler valve operator objects
   std::vector<SprinklerValveOperator> valve_op_{2};
 
-  /// Valve control timers - FixedVector enforces that this can never grow beyond init() size
-  FixedVector<SprinklerTimer> timer_;
+  /// Valve control timers
+  std::vector<SprinklerTimer> timer_{};
 
   /// Other Sprinkler instances we should be aware of (used to check if pumps are in use)
   std::vector<Sprinkler *> other_controllers_;

esphome/components/switch/switch.cpp

@@ -62,7 +62,7 @@ void Switch::publish_state(bool state) {
   if (restore_mode & RESTORE_MODE_PERSISTENT_MASK)
     this->rtc_.save(&this->state);
 
-  ESP_LOGD(TAG, "'%s' >> %s", this->name_.c_str(), ONOFF(this->state));
+  ESP_LOGD(TAG, "'%s': Sending state %s", this->name_.c_str(), ONOFF(this->state));
   this->state_callback_.call(this->state);
 #if defined(USE_SWITCH) && defined(USE_CONTROLLER_REGISTRY)
   ControllerRegistry::notify_switch_update(this);

esphome/components/text/text.cpp

@@ -20,9 +20,9 @@ void Text::publish_state(const char *state, size_t len) {
     this->state.assign(state, len);
   }
   if (this->traits.get_mode() == TEXT_MODE_PASSWORD) {
-    ESP_LOGD(TAG, "'%s' >> " LOG_SECRET("'%s'"), this->get_name().c_str(), this->state.c_str());
+    ESP_LOGD(TAG, "'%s': Sending state " LOG_SECRET("'%s'"), this->get_name().c_str(), this->state.c_str());
   } else {
-    ESP_LOGD(TAG, "'%s' >> '%s'", this->get_name().c_str(), this->state.c_str());
+    ESP_LOGD(TAG, "'%s': Sending state %s", this->get_name().c_str(), this->state.c_str());
   }
   this->state_callback_.call(this->state);
 #if defined(USE_TEXT) && defined(USE_CONTROLLER_REGISTRY)

esphome/components/text_sensor/text_sensor.cpp

@@ -116,7 +116,7 @@ void TextSensor::internal_send_state_to_frontend(const char *state, size_t len)
 
 void TextSensor::notify_frontend_() {
   this->set_has_state(true);
-  ESP_LOGD(TAG, "'%s' >> '%s'", this->name_.c_str(), this->state.c_str());
+  ESP_LOGD(TAG, "'%s': Sending state '%s'", this->name_.c_str(), this->state.c_str());
   this->callback_.call(this->state);
 #if defined(USE_TEXT_SENSOR) && defined(USE_CONTROLLER_REGISTRY)
   ControllerRegistry::notify_text_sensor_update(this);

esphome/components/update/update_entity.cpp

@@ -10,7 +10,7 @@ static const char *const TAG = "update";
 
 void UpdateEntity::publish_state() {
   ESP_LOGD(TAG,
-           "'%s' >>\n"
+           "'%s' - Publishing:\n"
            "  Current Version: %s",
            this->name_.c_str(), this->update_info_.current_version.c_str());
 

esphome/components/valve/valve.cpp

@@ -133,7 +133,7 @@ void Valve::add_on_state_callback(std::function<void()> &&f) { this->state_callb
 void Valve::publish_state(bool save) {
   this->position = clamp(this->position, 0.0f, 1.0f);
 
-  ESP_LOGD(TAG, "'%s' >>", this->name_.c_str());
+  ESP_LOGD(TAG, "'%s' - Publishing:", this->name_.c_str());
   auto traits = this->get_traits();
   if (traits.get_supports_position()) {
     ESP_LOGD(TAG, "  Position: %.0f%%", this->position * 100.0f);

esphome/components/water_heater/water_heater.cpp

@@ -153,7 +153,7 @@ void WaterHeater::setup() {
 void WaterHeater::publish_state() {
   auto traits = this->get_traits();
   ESP_LOGD(TAG,
-           "'%s' >>\n"
+           "'%s' - Sending state:\n"
            "  Mode: %s",
            this->name_.c_str(), LOG_STR_ARG(water_heater_mode_to_string(this->mode_)));
   if (!std::isnan(this->current_temperature_)) {

esphome/components/web_server/__init__.py

@@ -203,7 +203,7 @@ CONFIG_SCHEMA = cv.All(
             cv.Optional(CONF_OTA): cv.boolean,
             cv.Optional(CONF_LOG, default=True): cv.boolean,
             cv.Optional(CONF_LOCAL): cv.boolean,
-            cv.Optional(CONF_COMPRESSION, default="gzip"): cv.one_of("gzip", "br"),
+            cv.Optional(CONF_COMPRESSION, default="br"): cv.one_of("br", "gzip"),
             cv.Optional(CONF_SORTING_GROUPS): cv.ensure_list(sorting_group),
         }
     ).extend(cv.COMPONENT_SCHEMA),

esphome/components/web_server/web_server.cpp

@@ -753,6 +753,9 @@ void WebServer::handle_button_request(AsyncWebServerRequest *request, const UrlM
   }
   request->send(404);
 }
+std::string WebServer::button_state_json_generator(WebServer *web_server, void *source) {
+  return web_server->button_json_((button::Button *) (source), DETAIL_STATE);
+}
 std::string WebServer::button_all_json_generator(WebServer *web_server, void *source) {
   return web_server->button_json_((button::Button *) (source), DETAIL_ALL);
 }

esphome/components/web_server/web_server.h

@@ -295,7 +295,7 @@ class WebServer : public Controller,
   /// Handle a button request under '/button/<id>/press'.
   void handle_button_request(AsyncWebServerRequest *request, const UrlMatch &match);
 
-  // Buttons are stateless, so there is no button_state_json_generator
+  static std::string button_state_json_generator(WebServer *web_server, void *source);
   static std::string button_all_json_generator(WebServer *web_server, void *source);
 #endif
 

esphome/core/hash_base.h

@@ -44,15 +44,7 @@ class HashBase {
   virtual size_t get_size() const = 0;
 
  protected:
-// ESP32 variants with DMA-based hardware SHA (all except original ESP32) require 32-byte aligned buffers.
-// Original ESP32 uses a different hardware SHA implementation without DMA alignment requirements.
-// Other platforms (ESP8266, RP2040, LibreTiny) use software SHA and don't need alignment.
-// Storage sized for max(MD5=16, SHA256=32) bytes
-#if defined(USE_ESP32) && !defined(USE_ESP32_VARIANT_ESP32)
-  alignas(32) uint8_t digest_[32];
-#else
-  uint8_t digest_[32];
-#endif
+  uint8_t digest_[32];  // Storage sized for max(MD5=16, SHA256=32) bytes
 };
 
 }  // namespace esphome

requirements_test.txt

@@ -1,6 +1,6 @@
 pylint==4.0.4
 flake8==7.3.0  # also change in .pre-commit-config.yaml when updating
-ruff==0.14.12  # also change in .pre-commit-config.yaml when updating
+ruff==0.14.11  # also change in .pre-commit-config.yaml when updating
 pyupgrade==3.21.2  # also change in .pre-commit-config.yaml when updating
 pre-commit
 

script/determine-jobs.py

@@ -90,8 +90,6 @@ class Platform(StrEnum):
     ESP32_S2_IDF = "esp32-s2-idf"
     ESP32_S3_IDF = "esp32-s3-idf"
     BK72XX_ARD = "bk72xx-ard"  # LibreTiny BK7231N
-    RTL87XX_ARD = "rtl87xx-ard"  # LibreTiny RTL8720x
-    LN882X_ARD = "ln882x-ard"  # LibreTiny LN882x
     RP2040_ARD = "rp2040-ard"  # Raspberry Pi Pico
 
 
@@ -124,8 +122,8 @@ PLATFORM_SPECIFIC_COMPONENTS = frozenset(
 #                      fastest build times, most sensitive to code size changes
 # 3. ESP32 IDF - Primary ESP32 platform, most representative of modern ESPHome
 # 4-6. Other ESP32 variants - Less commonly used but still supported
-# 7-9. LibreTiny platforms (BK72XX, RTL87XX, LN882X) - good for detecting LibreTiny-specific changes
-# 10. RP2040 - Raspberry Pi Pico platform
+# 7. BK72XX - LibreTiny platform (good for detecting LibreTiny-specific changes)
+# 8. RP2040 - Raspberry Pi Pico platform
 MEMORY_IMPACT_PLATFORM_PREFERENCE = [
     Platform.ESP32_C6_IDF,  # ESP32-C6 IDF (newest, supports Thread/Zigbee)
     Platform.ESP8266_ARD,  # ESP8266 Arduino (most memory constrained, fastest builds)
@@ -134,8 +132,6 @@ MEMORY_IMPACT_PLATFORM_PREFERENCE = [
     Platform.ESP32_S2_IDF,  # ESP32-S2 IDF
     Platform.ESP32_S3_IDF,  # ESP32-S3 IDF
     Platform.BK72XX_ARD,  # LibreTiny BK7231N
-    Platform.RTL87XX_ARD,  # LibreTiny RTL8720x
-    Platform.LN882X_ARD,  # LibreTiny LN882x
     Platform.RP2040_ARD,  # Raspberry Pi Pico
 ]
 
@@ -415,8 +411,6 @@ def _detect_platform_hint_from_filename(filename: str) -> Platform | None:
     - wifi_component_esp8266.cpp, *_esp8266.h -> ESP8266_ARD
     - *_esp32*.cpp -> ESP32 IDF (generic)
     - *_libretiny.cpp, *_bk72*.* -> BK72XX (LibreTiny)
-    - *_rtl87*.* -> RTL87XX (LibreTiny Realtek)
-    - *_ln882*.* -> LN882X (LibreTiny Lightning)
     - *_pico.cpp, *_rp2040.* -> RP2040_ARD
 
     Args:
@@ -450,12 +444,7 @@ def _detect_platform_hint_from_filename(filename: str) -> Platform | None:
     if "esp32" in filename_lower:
         return Platform.ESP32_IDF
 
-    # LibreTiny platforms (check specific variants before generic libretiny)
-    # Check specific variants first to handle paths like libretiny/wifi_rtl87xx.cpp
-    if "rtl87" in filename_lower:
-        return Platform.RTL87XX_ARD
-    if "ln882" in filename_lower:
-        return Platform.LN882X_ARD
+    # LibreTiny (via 'libretiny' pattern or BK72xx-specific files)
     if "libretiny" in filename_lower or "bk72" in filename_lower:
         return Platform.BK72XX_ARD
 

tests/component_tests/image/config/mm_dimensions.svg

@@ -1,5 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<svg xmlns="http://www.w3.org/2000/svg" width="10mm" height="10mm" viewBox="0 0 100 100">
-  <rect x="0" y="0" width="100" height="100" fill="#00FF00"/>
-  <circle cx="50" cy="50" r="30" fill="#0000FF"/>
-</svg>

tests/component_tests/image/test_init.py

@@ -5,21 +5,17 @@ from __future__ import annotations
 from collections.abc import Callable
 from pathlib import Path
 from typing import Any
-from unittest.mock import MagicMock, patch
 
 import pytest
 
 from esphome import config_validation as cv
 from esphome.components.image import (
-    CONF_INVERT_ALPHA,
-    CONF_OPAQUE,
     CONF_TRANSPARENCY,
     CONFIG_SCHEMA,
     get_all_image_metadata,
     get_image_metadata,
-    write_image,
 )
-from esphome.const import CONF_DITHER, CONF_FILE, CONF_ID, CONF_RAW_DATA_ID, CONF_TYPE
+from esphome.const import CONF_ID, CONF_RAW_DATA_ID, CONF_TYPE
 from esphome.core import CORE
 
 
@@ -354,52 +350,3 @@ def test_get_all_image_metadata_empty() -> None:
         "get_all_image_metadata should always return a dict"
     )
     # Length could be 0 or more depending on what's in CORE at test time
-
-
-@pytest.fixture
-def mock_progmem_array():
-    """Mock progmem_array to avoid needing a proper ID object in tests."""
-    with patch("esphome.components.image.cg.progmem_array") as mock_progmem:
-        mock_progmem.return_value = MagicMock()
-        yield mock_progmem
-
-
-@pytest.mark.asyncio
-async def test_svg_with_mm_dimensions_succeeds(
-    component_config_path: Callable[[str], Path],
-    mock_progmem_array: MagicMock,
-) -> None:
-    """Test that SVG files with dimensions in mm are successfully processed."""
-    # Create a config for write_image without CONF_RESIZE
-    config = {
-        CONF_FILE: component_config_path("mm_dimensions.svg"),
-        CONF_TYPE: "BINARY",
-        CONF_TRANSPARENCY: CONF_OPAQUE,
-        CONF_DITHER: "NONE",
-        CONF_INVERT_ALPHA: False,
-        CONF_RAW_DATA_ID: "test_raw_data_id",
-    }
-
-    # This should succeed without raising an error
-    result = await write_image(config)
-
-    # Verify that write_image returns the expected tuple
-    assert isinstance(result, tuple), "write_image should return a tuple"
-    assert len(result) == 6, "write_image should return 6 values"
-
-    prog_arr, width, height, image_type, trans_value, frame_count = result
-
-    # Verify the dimensions are positive integers
-    # At 100 DPI, 10mm = ~39 pixels (10mm * 100dpi / 25.4mm_per_inch)
-    assert isinstance(width, int), "Width should be an integer"
-    assert isinstance(height, int), "Height should be an integer"
-    assert width > 0, "Width should be positive"
-    assert height > 0, "Height should be positive"
-    assert frame_count == 1, "Single image should have frame_count of 1"
-    # Verify we got reasonable dimensions from the mm-based SVG
-    assert 30 < width < 50, (
-        f"Width should be around 39 pixels for 10mm at 100dpi, got {width}"
-    )
-    assert 30 < height < 50, (
-        f"Height should be around 39 pixels for 10mm at 100dpi, got {height}"
-    )

tests/script/test_determine_jobs.py

@@ -1472,24 +1472,6 @@ def test_detect_memory_impact_config_runs_at_component_limit(tmp_path: Path) ->
             determine_jobs.Platform.BK72XX_ARD,
         ),
         ("esphome/components/ble/ble_bk72xx.cpp", determine_jobs.Platform.BK72XX_ARD),
-        # RTL87xx (LibreTiny Realtek) detection
-        (
-            "tests/components/logger/test.rtl87xx-ard.yaml",
-            determine_jobs.Platform.RTL87XX_ARD,
-        ),
-        (
-            "esphome/components/libretiny/wifi_rtl87xx.cpp",
-            determine_jobs.Platform.RTL87XX_ARD,
-        ),
-        # LN882x (LibreTiny Lightning) detection
-        (
-            "tests/components/logger/test.ln882x-ard.yaml",
-            determine_jobs.Platform.LN882X_ARD,
-        ),
-        (
-            "esphome/components/libretiny/wifi_ln882x.cpp",
-            determine_jobs.Platform.LN882X_ARD,
-        ),
         # RP2040 / Raspberry Pi Pico detection
         ("esphome/components/gpio/gpio_rp2040.cpp", determine_jobs.Platform.RP2040_ARD),
         ("esphome/components/wifi/wifi_rp2040.cpp", determine_jobs.Platform.RP2040_ARD),
@@ -1519,10 +1501,6 @@ def test_detect_memory_impact_config_runs_at_component_limit(tmp_path: Path) ->
         "esp32_in_name",
         "libretiny",
         "bk72xx",
-        "rtl87xx_test_yaml",
-        "rtl87xx_wifi",
-        "ln882x_test_yaml",
-        "ln882x_wifi",
         "rp2040_gpio",
         "rp2040_wifi",
         "pico_i2c",