[socket] Devirtualize Socket::ready() and get_fd() for hot loop path

Move fd_, closed_, and loop_monitored_ fields from BSD/LWIP socket
implementations to the base Socket class. Since only one socket
implementation is active per build, these can be non-virtual.

Make Socket::ready() and get_fd() non-virtual, eliminating vtable
dispatch on every main loop iteration. Inline is_socket_ready via
friendship for the fast path while keeping the public API with
bounds checking for external callers.

Saves ~316 bytes of flash on ESP32-IDF builds.

.clang-tidy.hash

@@ -1 +1 @@
-37ec8d5a343c8d0a485fd2118cbdabcbccd7b9bca197e4a392be75087974dced
+8dc4dae0acfa22f26c7cde87fc24e60b27f29a73300e02189b78f0315e5d0695

esphome/components/api/api.proto

@@ -1155,9 +1155,11 @@ enum WaterHeaterCommandHasField {
   WATER_HEATER_COMMAND_HAS_NONE = 0;
   WATER_HEATER_COMMAND_HAS_MODE = 1;
   WATER_HEATER_COMMAND_HAS_TARGET_TEMPERATURE = 2;
-  WATER_HEATER_COMMAND_HAS_STATE = 4;
+  WATER_HEATER_COMMAND_HAS_STATE = 4 [deprecated=true];
   WATER_HEATER_COMMAND_HAS_TARGET_TEMPERATURE_LOW = 8;
   WATER_HEATER_COMMAND_HAS_TARGET_TEMPERATURE_HIGH = 16;
+  WATER_HEATER_COMMAND_HAS_ON_STATE = 32;
+  WATER_HEATER_COMMAND_HAS_AWAY_STATE = 64;
 }
 
 message WaterHeaterCommandRequest {

esphome/components/api/api_connection.cpp

@@ -133,8 +133,8 @@ void APIConnection::start() {
     return;
   }
   // Initialize client name with peername (IP address) until Hello message provides actual name
-  const char *peername = this->helper_->get_client_peername();
-  this->helper_->set_client_name(peername, strlen(peername));
+  char peername[socket::SOCKADDR_STR_LEN];
+  this->helper_->set_client_name(this->helper_->get_peername_to(peername), strlen(peername));
 }
 
 APIConnection::~APIConnection() {
@@ -179,8 +179,8 @@ void APIConnection::begin_iterator_(ActiveIterator type) {
 
 void APIConnection::loop() {
   if (this->flags_.next_close) {
-    // requested a disconnect
-    this->helper_->close();
+    // requested a disconnect - don't close socket here, let APIServer::loop() do it
+    // so getpeername() still works for the disconnect trigger
     this->flags_.remove = true;
     return;
   }
@@ -219,8 +219,35 @@ void APIConnection::loop() {
     this->process_batch_();
   }
 
-  if (this->active_iterator_ != ActiveIterator::NONE) {
-    this->process_active_iterator_();
+  switch (this->active_iterator_) {
+    case ActiveIterator::LIST_ENTITIES:
+      if (this->iterator_storage_.list_entities.completed()) {
+        this->destroy_active_iterator_();
+        if (this->flags_.state_subscription) {
+          this->begin_iterator_(ActiveIterator::INITIAL_STATE);
+        }
+      } else {
+        this->process_iterator_batch_(this->iterator_storage_.list_entities);
+      }
+      break;
+    case ActiveIterator::INITIAL_STATE:
+      if (this->iterator_storage_.initial_state.completed()) {
+        this->destroy_active_iterator_();
+        // Process any remaining batched messages immediately
+        if (!this->deferred_batch_.empty()) {
+          this->process_batch_();
+        }
+        // Now that everything is sent, enable immediate sending for future state changes
+        this->flags_.should_try_send_immediately = true;
+        // Release excess memory from buffers that grew during initial sync
+        this->deferred_batch_.release_buffer();
+        this->helper_->release_buffers();
+      } else {
+        this->process_iterator_batch_(this->iterator_storage_.initial_state);
+      }
+      break;
+    case ActiveIterator::NONE:
+      break;
   }
 
   if (this->flags_.sent_ping) {
@@ -256,49 +283,6 @@ void APIConnection::loop() {
 #endif
 }
 
-void APIConnection::process_active_iterator_() {
-  // Caller ensures active_iterator_ != NONE
-  if (this->active_iterator_ == ActiveIterator::LIST_ENTITIES) {
-    if (this->iterator_storage_.list_entities.completed()) {
-      this->destroy_active_iterator_();
-      if (this->flags_.state_subscription) {
-        this->begin_iterator_(ActiveIterator::INITIAL_STATE);
-      }
-    } else {
-      this->process_iterator_batch_(this->iterator_storage_.list_entities);
-    }
-  } else {  // INITIAL_STATE
-    if (this->iterator_storage_.initial_state.completed()) {
-      this->destroy_active_iterator_();
-      // Process any remaining batched messages immediately
-      if (!this->deferred_batch_.empty()) {
-        this->process_batch_();
-      }
-      // Now that everything is sent, enable immediate sending for future state changes
-      this->flags_.should_try_send_immediately = true;
-      // Release excess memory from buffers that grew during initial sync
-      this->deferred_batch_.release_buffer();
-      this->helper_->release_buffers();
-    } else {
-      this->process_iterator_batch_(this->iterator_storage_.initial_state);
-    }
-  }
-}
-
-void APIConnection::process_iterator_batch_(ComponentIterator &iterator) {
-  size_t initial_size = this->deferred_batch_.size();
-  size_t max_batch = this->get_max_batch_size_();
-  while (!iterator.completed() && (this->deferred_batch_.size() - initial_size) < max_batch) {
-    iterator.advance();
-  }
-
-  // If the batch is full, process it immediately
-  // Note: iterator.advance() already calls schedule_batch_() via schedule_message_()
-  if (this->deferred_batch_.size() >= max_batch) {
-    this->process_batch_();
-  }
-}
-
 bool APIConnection::send_disconnect_response_() {
   // remote initiated disconnect_client
   // don't close yet, we still need to send the disconnect response
@@ -309,7 +293,8 @@ bool APIConnection::send_disconnect_response_() {
   return this->send_message(resp, DisconnectResponse::MESSAGE_TYPE);
 }
 void APIConnection::on_disconnect_response() {
-  this->helper_->close();
+  // Don't close socket here, let APIServer::loop() do it
+  // so getpeername() still works for the disconnect trigger
   this->flags_.remove = true;
 }
 
@@ -1359,8 +1344,12 @@ void APIConnection::on_water_heater_command_request(const WaterHeaterCommandRequ
     call.set_target_temperature_low(msg.target_temperature_low);
   if (msg.has_fields & enums::WATER_HEATER_COMMAND_HAS_TARGET_TEMPERATURE_HIGH)
     call.set_target_temperature_high(msg.target_temperature_high);
-  if (msg.has_fields & enums::WATER_HEATER_COMMAND_HAS_STATE) {
+  if ((msg.has_fields & enums::WATER_HEATER_COMMAND_HAS_AWAY_STATE) ||
+      (msg.has_fields & enums::WATER_HEATER_COMMAND_HAS_STATE)) {
     call.set_away((msg.state & water_heater::WATER_HEATER_STATE_AWAY) != 0);
+  }
+  if ((msg.has_fields & enums::WATER_HEATER_COMMAND_HAS_ON_STATE) ||
+      (msg.has_fields & enums::WATER_HEATER_COMMAND_HAS_STATE)) {
     call.set_on((msg.state & water_heater::WATER_HEATER_STATE_ON) != 0);
   }
   call.perform();
@@ -1481,8 +1470,11 @@ void APIConnection::complete_authentication_() {
   this->flags_.connection_state = static_cast<uint8_t>(ConnectionState::AUTHENTICATED);
   this->log_client_(ESPHOME_LOG_LEVEL_DEBUG, LOG_STR("connected"));
 #ifdef USE_API_CLIENT_CONNECTED_TRIGGER
-  this->parent_->get_client_connected_trigger()->trigger(std::string(this->helper_->get_client_name()),
-                                                         std::string(this->helper_->get_client_peername()));
+  {
+    char peername[socket::SOCKADDR_STR_LEN];
+    this->parent_->get_client_connected_trigger()->trigger(std::string(this->helper_->get_client_name()),
+                                                           std::string(this->helper_->get_peername_to(peername)));
+  }
 #endif
 #ifdef USE_HOMEASSISTANT_TIME
   if (homeassistant::global_homeassistant_time != nullptr) {
@@ -1501,8 +1493,9 @@ bool APIConnection::send_hello_response_(const HelloRequest &msg) {
   this->helper_->set_client_name(msg.client_info.c_str(), msg.client_info.size());
   this->client_api_version_major_ = msg.api_version_major;
   this->client_api_version_minor_ = msg.api_version_minor;
+  char peername[socket::SOCKADDR_STR_LEN];
   ESP_LOGV(TAG, "Hello from client: '%s' | %s | API Version %" PRIu32 ".%" PRIu32, this->helper_->get_client_name(),
-           this->helper_->get_client_peername(), this->client_api_version_major_, this->client_api_version_minor_);
+           this->helper_->get_peername_to(peername), this->client_api_version_major_, this->client_api_version_minor_);
 
   HelloResponse resp;
   resp.api_version_major = 1;
@@ -1850,7 +1843,8 @@ void APIConnection::on_no_setup_connection() {
   this->log_client_(ESPHOME_LOG_LEVEL_DEBUG, LOG_STR("no connection setup"));
 }
 void APIConnection::on_fatal_error() {
-  this->helper_->close();
+  // Don't close socket here - keep it open so getpeername() works for logging
+  // Socket will be closed when client is removed from the list in APIServer::loop()
   this->flags_.remove = true;
 }
 
@@ -2207,12 +2201,14 @@ void APIConnection::process_state_subscriptions_() {
 #endif  // USE_API_HOMEASSISTANT_STATES
 
 void APIConnection::log_client_(int level, const LogString *message) {
+  char peername[socket::SOCKADDR_STR_LEN];
   esp_log_printf_(level, TAG, __LINE__, ESPHOME_LOG_FORMAT("%s (%s): %s"), this->helper_->get_client_name(),
-                  this->helper_->get_client_peername(), LOG_STR_ARG(message));
+                  this->helper_->get_peername_to(peername), LOG_STR_ARG(message));
 }
 
 void APIConnection::log_warning_(const LogString *message, APIError err) {
-  ESP_LOGW(TAG, "%s (%s): %s %s errno=%d", this->helper_->get_client_name(), this->helper_->get_client_peername(),
+  char peername[socket::SOCKADDR_STR_LEN];
+  ESP_LOGW(TAG, "%s (%s): %s %s errno=%d", this->helper_->get_client_name(), this->helper_->get_peername_to(peername),
            LOG_STR_ARG(message), LOG_STR_ARG(api_error_to_logstr(err)), errno);
 }
 

esphome/components/api/api_connection.h

@@ -15,10 +15,6 @@
 #include <limits>
 #include <vector>
 
-namespace esphome {
-class ComponentIterator;
-}  // namespace esphome
-
 namespace esphome::api {
 
 // Keepalive timeout in milliseconds
@@ -280,8 +276,10 @@ class APIConnection final : public APIServerConnectionBase {
   bool send_buffer(ProtoWriteBuffer buffer, uint8_t message_type) override;
 
   const char *get_name() const { return this->helper_->get_client_name(); }
-  /// Get peer name (IP address) - cached at connection init time
-  const char *get_peername() const { return this->helper_->get_client_peername(); }
+  /// Get peer name (IP address) into caller-provided buffer, returns buf for convenience
+  const char *get_peername_to(std::span<char, socket::SOCKADDR_STR_LEN> buf) const {
+    return this->helper_->get_peername_to(buf);
+  }
 
  protected:
   // Helper function to handle authentication completion
@@ -368,13 +366,20 @@ class APIConnection final : public APIServerConnectionBase {
     return this->client_supports_api_version(1, 14) ? MAX_INITIAL_PER_BATCH : MAX_INITIAL_PER_BATCH_LEGACY;
   }
 
-  // Process active iterator (list_entities/initial_state) during connection setup.
-  // Extracted from loop() — only runs during initial handshake, NONE in steady state.
-  void __attribute__((noinline)) process_active_iterator_();
+  // Helper method to process multiple entities from an iterator in a batch
+  template<typename Iterator> void process_iterator_batch_(Iterator &iterator) {
+    size_t initial_size = this->deferred_batch_.size();
+    size_t max_batch = this->get_max_batch_size_();
+    while (!iterator.completed() && (this->deferred_batch_.size() - initial_size) < max_batch) {
+      iterator.advance();
+    }
 
-  // Helper method to process multiple entities from an iterator in a batch.
-  // Takes ComponentIterator base class reference to avoid duplicate template instantiations.
-  void process_iterator_batch_(ComponentIterator &iterator);
+    // If the batch is full, process it immediately
+    // Note: iterator.advance() already calls schedule_batch_() via schedule_message_()
+    if (this->deferred_batch_.size() >= max_batch) {
+      this->process_batch_();
+    }
+  }
 
 #ifdef USE_BINARY_SENSOR
   static uint16_t try_send_binary_sensor_state(EntityBase *entity, APIConnection *conn, uint32_t remaining_size);

esphome/components/api/api_frame_helper.cpp

@@ -16,7 +16,12 @@ static const char *const TAG = "api.frame_helper";
 static constexpr size_t API_MAX_LOG_BYTES = 168;
 
 #if ESPHOME_LOG_LEVEL >= ESPHOME_LOG_LEVEL_VERY_VERBOSE
-#define HELPER_LOG(msg, ...) ESP_LOGVV(TAG, "%s (%s): " msg, this->client_name_, this->client_peername_, ##__VA_ARGS__)
+#define HELPER_LOG(msg, ...) \
+  do { \
+    char peername_buf[socket::SOCKADDR_STR_LEN]; \
+    this->get_peername_to(peername_buf); \
+    ESP_LOGVV(TAG, "%s (%s): " msg, this->client_name_, peername_buf, ##__VA_ARGS__); \
+  } while (0)
 #else
 #define HELPER_LOG(msg, ...) ((void) 0)
 #endif
@@ -240,13 +245,20 @@ APIError APIFrameHelper::try_send_tx_buf_() {
   return APIError::OK;  // All buffers sent successfully
 }
 
+const char *APIFrameHelper::get_peername_to(std::span<char, socket::SOCKADDR_STR_LEN> buf) const {
+  if (this->socket_) {
+    this->socket_->getpeername_to(buf);
+  } else {
+    buf[0] = '\0';
+  }
+  return buf.data();
+}
+
 APIError APIFrameHelper::init_common_() {
   if (state_ != State::INITIALIZE || this->socket_ == nullptr) {
     HELPER_LOG("Bad state for init %d", (int) state_);
     return APIError::BAD_STATE;
   }
-  // Cache peername now while socket is valid - needed for error logging after socket failure
-  this->socket_->getpeername_to(this->client_peername_);
   int err = this->socket_->setblocking(false);
   if (err != 0) {
     state_ = State::FAILED;

esphome/components/api/api_frame_helper.h

@@ -90,8 +90,9 @@ class APIFrameHelper {
 
   // Get client name (null-terminated)
   const char *get_client_name() const { return this->client_name_; }
-  // Get client peername/IP (null-terminated, cached at init time for availability after socket failure)
-  const char *get_client_peername() const { return this->client_peername_; }
+  // Get client peername/IP into caller-provided buffer (fetches on-demand from socket)
+  // Returns pointer to buf for convenience in printf-style calls
+  const char *get_peername_to(std::span<char, socket::SOCKADDR_STR_LEN> buf) const;
   // Set client name from buffer with length (truncates if needed)
   void set_client_name(const char *name, size_t len) {
     size_t copy_len = std::min(len, sizeof(this->client_name_) - 1);
@@ -105,6 +106,8 @@ class APIFrameHelper {
   bool can_write_without_blocking() { return this->state_ == State::DATA && this->tx_buf_count_ == 0; }
   int getpeername(struct sockaddr *addr, socklen_t *addrlen) { return socket_->getpeername(addr, addrlen); }
   APIError close() {
+    if (state_ == State::CLOSED)
+      return APIError::OK;  // Already closed
     state_ = State::CLOSED;
     int err = this->socket_->close();
     if (err == -1)
@@ -231,8 +234,6 @@ class APIFrameHelper {
 
   // Client name buffer - stores name from Hello message or initial peername
   char client_name_[CLIENT_INFO_NAME_MAX_LEN]{};
-  // Cached peername/IP address - captured at init time for availability after socket failure
-  char client_peername_[socket::SOCKADDR_STR_LEN]{};
 
   // Group smaller types together
   uint16_t rx_buf_len_ = 0;

esphome/components/api/api_frame_helper_noise.cpp

@@ -29,7 +29,12 @@ static constexpr size_t PROLOGUE_INIT_LEN = 12;  // strlen("NoiseAPIInit")
 static constexpr size_t API_MAX_LOG_BYTES = 168;
 
 #if ESPHOME_LOG_LEVEL >= ESPHOME_LOG_LEVEL_VERY_VERBOSE
-#define HELPER_LOG(msg, ...) ESP_LOGVV(TAG, "%s (%s): " msg, this->client_name_, this->client_peername_, ##__VA_ARGS__)
+#define HELPER_LOG(msg, ...) \
+  do { \
+    char peername_buf[socket::SOCKADDR_STR_LEN]; \
+    this->get_peername_to(peername_buf); \
+    ESP_LOGVV(TAG, "%s (%s): " msg, this->client_name_, peername_buf, ##__VA_ARGS__); \
+  } while (0)
 #else
 #define HELPER_LOG(msg, ...) ((void) 0)
 #endif

esphome/components/api/api_frame_helper_plaintext.cpp

@@ -21,7 +21,12 @@ static const char *const TAG = "api.plaintext";
 static constexpr size_t API_MAX_LOG_BYTES = 168;
 
 #if ESPHOME_LOG_LEVEL >= ESPHOME_LOG_LEVEL_VERY_VERBOSE
-#define HELPER_LOG(msg, ...) ESP_LOGVV(TAG, "%s (%s): " msg, this->client_name_, this->client_peername_, ##__VA_ARGS__)
+#define HELPER_LOG(msg, ...) \
+  do { \
+    char peername_buf[socket::SOCKADDR_STR_LEN]; \
+    this->get_peername_to(peername_buf); \
+    ESP_LOGVV(TAG, "%s (%s): " msg, this->client_name_, peername_buf, ##__VA_ARGS__); \
+  } while (0)
 #else
 #define HELPER_LOG(msg, ...) ((void) 0)
 #endif

esphome/components/api/api_pb2.h

@@ -147,6 +147,8 @@ enum WaterHeaterCommandHasField : uint32_t {
   WATER_HEATER_COMMAND_HAS_STATE = 4,
   WATER_HEATER_COMMAND_HAS_TARGET_TEMPERATURE_LOW = 8,
   WATER_HEATER_COMMAND_HAS_TARGET_TEMPERATURE_HIGH = 16,
+  WATER_HEATER_COMMAND_HAS_ON_STATE = 32,
+  WATER_HEATER_COMMAND_HAS_AWAY_STATE = 64,
 };
 #ifdef USE_NUMBER
 enum NumberMode : uint32_t {

esphome/components/api/api_pb2_dump.cpp

@@ -385,6 +385,10 @@ const char *proto_enum_to_string<enums::WaterHeaterCommandHasField>(enums::Water
       return "WATER_HEATER_COMMAND_HAS_TARGET_TEMPERATURE_LOW";
     case enums::WATER_HEATER_COMMAND_HAS_TARGET_TEMPERATURE_HIGH:
       return "WATER_HEATER_COMMAND_HAS_TARGET_TEMPERATURE_HIGH";
+    case enums::WATER_HEATER_COMMAND_HAS_ON_STATE:
+      return "WATER_HEATER_COMMAND_HAS_ON_STATE";
+    case enums::WATER_HEATER_COMMAND_HAS_AWAY_STATE:
+      return "WATER_HEATER_COMMAND_HAS_AWAY_STATE";
     default:
       return "UNKNOWN";
   }

esphome/components/api/api_server.cpp

@@ -192,11 +192,15 @@ void APIServer::loop() {
     ESP_LOGV(TAG, "Remove connection %s", client->get_name());
 
 #ifdef USE_API_CLIENT_DISCONNECTED_TRIGGER
-    // Save client info before removal for the trigger
+    // Save client info before closing socket and removal for the trigger
+    char peername_buf[socket::SOCKADDR_STR_LEN];
     std::string client_name(client->get_name());
-    std::string client_peername(client->get_peername());
+    std::string client_peername(client->get_peername_to(peername_buf));
 #endif
 
+    // Close socket now (was deferred from on_fatal_error to allow getpeername)
+    client->helper_->close();
+
     // Swap with the last element and pop (avoids expensive vector shifts)
     if (client_index < this->clients_.size() - 1) {
       std::swap(this->clients_[client_index], this->clients_.back());

esphome/components/api/list_entities.h

@@ -94,6 +94,7 @@ class ListEntitiesIterator : public ComponentIterator {
   bool on_update(update::UpdateEntity *entity) override;
 #endif
   bool on_end() override;
+  bool completed() { return this->state_ == IteratorState::NONE; }
 
  protected:
   APIConnection *client_;

esphome/components/api/subscribe_state.h

@@ -88,6 +88,7 @@ class InitialStateIterator : public ComponentIterator {
 #ifdef USE_UPDATE
   bool on_update(update::UpdateEntity *entity) override;
 #endif
+  bool completed() { return this->state_ == IteratorState::NONE; }
 
  protected:
   APIConnection *client_;

esphome/components/esp32/__init__.py

@@ -135,6 +135,7 @@ DEFAULT_EXCLUDED_IDF_COMPONENTS = (
     "esp_driver_dac",  # DAC driver - only needed by esp32_dac component
     "esp_driver_i2s",  # I2S driver - only needed by i2s_audio component
     "esp_driver_mcpwm",  # MCPWM driver - ESPHome doesn't use motor control PWM
+    "esp_driver_pcnt",  # PCNT driver - only needed by pulse_counter, hlw8012 components
     "esp_driver_rmt",  # RMT driver - only needed by remote_transmitter/receiver, neopixelbus
     "esp_driver_touch_sens",  # Touch sensor driver - only needed by esp32_touch
     "esp_driver_twai",  # TWAI/CAN driver - only needed by esp32_can component

esphome/components/esp32_hosted/__init__.py

@@ -95,9 +95,9 @@ async def to_code(config):
     framework_ver: cv.Version = CORE.data[KEY_CORE][KEY_FRAMEWORK_VERSION]
     os.environ["ESP_IDF_VERSION"] = f"{framework_ver.major}.{framework_ver.minor}"
     if framework_ver >= cv.Version(5, 5, 0):
-        esp32.add_idf_component(name="espressif/esp_wifi_remote", ref="1.2.4")
+        esp32.add_idf_component(name="espressif/esp_wifi_remote", ref="1.3.2")
         esp32.add_idf_component(name="espressif/eppp_link", ref="1.1.4")
-        esp32.add_idf_component(name="espressif/esp_hosted", ref="2.9.3")
+        esp32.add_idf_component(name="espressif/esp_hosted", ref="2.11.5")
     else:
         esp32.add_idf_component(name="espressif/esp_wifi_remote", ref="0.13.0")
         esp32.add_idf_component(name="espressif/eppp_link", ref="0.2.0")

esphome/components/esp32_rmt_led_strip/led_strip.cpp

@@ -7,22 +7,25 @@
 #include "esphome/core/log.h"
 
 #include <esp_attr.h>
+#include <esp_clk_tree.h>
 
 namespace esphome {
 namespace esp32_rmt_led_strip {
 
 static const char *const TAG = "esp32_rmt_led_strip";
 
-#ifdef USE_ESP32_VARIANT_ESP32H2
-static const uint32_t RMT_CLK_FREQ = 32000000;
-static const uint8_t RMT_CLK_DIV = 1;
-#else
-static const uint32_t RMT_CLK_FREQ = 80000000;
-static const uint8_t RMT_CLK_DIV = 2;
-#endif
-
 static const size_t RMT_SYMBOLS_PER_BYTE = 8;
 
+// Query the RMT default clock source frequency. This varies by variant:
+// APB (80MHz) on ESP32/S2/S3/C3, PLL_F80M (80MHz) on C6/P4, XTAL (32MHz) on H2.
+// Worst-case reset time is WS2811 at 300µs = 24000 ticks at 80MHz, well within
+// the 15-bit rmt_symbol_word_t duration field max of 32767.
+static uint32_t rmt_resolution_hz() {
+  uint32_t freq;
+  esp_clk_tree_src_get_freq_hz((soc_module_clk_t) RMT_CLK_SRC_DEFAULT, ESP_CLK_TREE_SRC_FREQ_PRECISION_CACHED, &freq);
+  return freq;
+}
+
 #if ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(5, 3, 0)
 static size_t IRAM_ATTR HOT encoder_callback(const void *data, size_t size, size_t symbols_written, size_t symbols_free,
                                              rmt_symbol_word_t *symbols, bool *done, void *arg) {
@@ -92,7 +95,7 @@ void ESP32RMTLEDStripLightOutput::setup() {
   rmt_tx_channel_config_t channel;
   memset(&channel, 0, sizeof(channel));
   channel.clk_src = RMT_CLK_SRC_DEFAULT;
-  channel.resolution_hz = RMT_CLK_FREQ / RMT_CLK_DIV;
+  channel.resolution_hz = rmt_resolution_hz();
   channel.gpio_num = gpio_num_t(this->pin_);
   channel.mem_block_symbols = this->rmt_symbols_;
   channel.trans_queue_depth = 1;
@@ -137,7 +140,7 @@ void ESP32RMTLEDStripLightOutput::setup() {
 
 void ESP32RMTLEDStripLightOutput::set_led_params(uint32_t bit0_high, uint32_t bit0_low, uint32_t bit1_high,
                                                  uint32_t bit1_low, uint32_t reset_time_high, uint32_t reset_time_low) {
-  float ratio = (float) RMT_CLK_FREQ / RMT_CLK_DIV / 1e09f;
+  float ratio = (float) rmt_resolution_hz() / 1e09f;
 
   // 0-bit
   this->params_.bit0.duration0 = (uint32_t) (ratio * bit0_high);

esphome/components/hlw8012/sensor.py

@@ -94,10 +94,7 @@ CONFIG_SCHEMA = cv.Schema(
 
 async def to_code(config):
     if CORE.is_esp32:
-        # Re-enable ESP-IDF's legacy driver component (excluded by default to save compile time)
-        # HLW8012 uses pulse_counter's PCNT storage which requires driver/pcnt.h
-        # TODO: Remove this once pulse_counter migrates to new PCNT API (driver/pulse_cnt.h)
-        include_builtin_idf_component("driver")
+        include_builtin_idf_component("esp_driver_pcnt")
 
     var = cg.new_Pvariable(config[CONF_ID])
     await cg.register_component(var, config)

esphome/components/http_request/http_request.h

@@ -103,6 +103,42 @@ inline bool is_success(int const status) { return status >= HTTP_STATUS_OK && st
  *   - ESP-IDF: blocking reads, 0 only returned when all content read
  *   - Arduino: non-blocking, 0 means "no data yet" or "all content read"
  *
+ * Chunked responses that complete in a reasonable time work correctly on both
+ * platforms. The limitation below applies only to *streaming* chunked
+ * responses where data arrives slowly over a long period.
+ *
+ * Streaming chunked responses are NOT supported (all platforms):
+ *   The read helpers (http_read_loop_result, http_read_fully) block the main
+ *   event loop until all response data is received. For streaming responses
+ *   where data trickles in slowly (e.g., TTS streaming via ffmpeg proxy),
+ *   this starves the event loop on both ESP-IDF and Arduino. If data arrives
+ *   just often enough to avoid the caller's timeout, the loop runs
+ *   indefinitely. If data stops entirely, ESP-IDF fails with
+ *   -ESP_ERR_HTTP_EAGAIN (transport timeout) while Arduino spins with
+ *   delay(1) until the caller's timeout fires. Supporting streaming requires
+ *   a non-blocking incremental read pattern that yields back to the event
+ *   loop between chunks. Components that need streaming should use
+ *   esp_http_client directly on a separate FreeRTOS task with
+ *   esp_http_client_is_complete_data_received() for completion detection
+ *   (see audio_reader.cpp for an example).
+ *
+ * Chunked transfer encoding - platform differences:
+ *   - ESP-IDF HttpContainer:
+ *       HttpContainerIDF overrides is_read_complete() to call
+ *       esp_http_client_is_complete_data_received(), which is the
+ *       authoritative completion check for both chunked and non-chunked
+ *       transfers. When esp_http_client_read() returns 0 for a completed
+ *       chunked response, read() returns 0 and is_read_complete() returns
+ *       true, so callers get COMPLETE from http_read_loop_result().
+ *
+ *   - Arduino HttpContainer:
+ *       Chunked responses are decoded internally (see
+ *       HttpContainerArduino::read_chunked_()). When the final chunk arrives,
+ *       is_chunked_ is cleared and content_length is set to bytes_read_.
+ *       Completion is then detected via is_read_complete(), and a subsequent
+ *       read() returns 0 to indicate "all content read" (not
+ *       HTTP_ERROR_CONNECTION_CLOSED).
+ *
  * Use the helper functions below instead of checking return values directly:
  *   - http_read_loop_result(): for manual loops with per-chunk processing
  *   - http_read_fully(): for simple "read N bytes into buffer" operations
@@ -204,9 +240,13 @@ class HttpContainer : public Parented<HttpRequestComponent> {
 
   size_t get_bytes_read() const { return this->bytes_read_; }
 
-  /// Check if all expected content has been read
-  /// For chunked responses, returns false (completion detected via read() returning error/EOF)
-  bool is_read_complete() const {
+  /// Check if all expected content has been read.
+  /// Base implementation handles non-chunked responses and status-code-based no-body checks.
+  /// Platform implementations may override for chunked completion detection:
+  ///   - ESP-IDF: overrides to call esp_http_client_is_complete_data_received() for chunked.
+  ///   - Arduino: read_chunked_() clears is_chunked_ and sets content_length on the final
+  ///     chunk, after which the base implementation detects completion.
+  virtual bool is_read_complete() const {
     // Per RFC 9112, these responses have no body:
     // - 1xx (Informational), 204 No Content, 205 Reset Content, 304 Not Modified
     if ((this->status_code >= 100 && this->status_code < 200) || this->status_code == HTTP_STATUS_NO_CONTENT ||

esphome/components/http_request/http_request_idf.cpp

@@ -218,32 +218,50 @@ std::shared_ptr<HttpContainer> HttpRequestIDF::perform(const std::string &url, c
   return container;
 }
 
+bool HttpContainerIDF::is_read_complete() const {
+  // Base class handles no-body status codes and non-chunked content_length completion
+  if (HttpContainer::is_read_complete()) {
+    return true;
+  }
+  // For chunked responses, use the authoritative ESP-IDF completion check
+  return this->is_chunked_ && esp_http_client_is_complete_data_received(this->client_);
+}
+
 // ESP-IDF HTTP read implementation (blocking mode)
 //
 // WARNING: Return values differ from BSD sockets! See http_request.h for full documentation.
 //
 // esp_http_client_read() in blocking mode returns:
 //   > 0: bytes read
-//   0: connection closed (end of stream)
+//   0: all chunked data received (is_chunk_complete true) or connection closed
+//   -ESP_ERR_HTTP_EAGAIN: transport timeout, no data available yet
 //   < 0: error
 //
 // We normalize to HttpContainer::read() contract:
 //   > 0: bytes read
-//   0: all content read (only returned when content_length is known and fully read)
+//   0: all content read (for both content_length-based and chunked completion)
 //   < 0: error/connection closed
 //
 // Note on chunked transfer encoding:
 //   esp_http_client_fetch_headers() returns 0 for chunked responses (no Content-Length header).
-//   We handle this by skipping the content_length check when content_length is 0,
-//   allowing esp_http_client_read() to handle chunked decoding internally and signal EOF
-//   by returning 0.
+//   When esp_http_client_read() returns 0 for a chunked response, is_read_complete() calls
+//   esp_http_client_is_complete_data_received() to distinguish successful completion from
+//   connection errors. Callers use http_read_loop_result() which checks is_read_complete()
+//   to return COMPLETE for successful chunked EOF.
+//
+// Streaming chunked responses are not supported (see http_request.h for details).
+// When data stops arriving, esp_http_client_read() returns -ESP_ERR_HTTP_EAGAIN
+// after its internal transport timeout (configured via timeout_ms) expires.
+// This is passed through as a negative return value, which callers treat as an error.
 int HttpContainerIDF::read(uint8_t *buf, size_t max_len) {
   const uint32_t start = millis();
   watchdog::WatchdogManager wdm(this->parent_->get_watchdog_timeout());
 
-  // Check if we've already read all expected content (non-chunked only)
-  // For chunked responses (content_length == 0), esp_http_client_read() handles EOF
-  if (this->is_read_complete()) {
+  // Check if we've already read all expected content (non-chunked and no-body only).
+  // Use the base class check here, NOT the override: esp_http_client_is_complete_data_received()
+  // returns true as soon as all data arrives from the network, but data may still be in
+  // the client's internal buffer waiting to be consumed by esp_http_client_read().
+  if (HttpContainer::is_read_complete()) {
     return 0;  // All content read successfully
   }
 
@@ -258,15 +276,18 @@ int HttpContainerIDF::read(uint8_t *buf, size_t max_len) {
     return read_len_or_error;
   }
 
-  // esp_http_client_read() returns 0 in two cases:
-  // 1. Known content_length: connection closed before all data received (error)
-  // 2. Chunked encoding (content_length == 0): end of stream reached (EOF)
-  // For case 1, returning HTTP_ERROR_CONNECTION_CLOSED is correct.
-  // For case 2, 0 indicates that all chunked data has already been delivered
-  // in previous successful read() calls, so treating this as a closed
-  // connection does not cause any loss of response data.
+  // esp_http_client_read() returns 0 when:
+  // - Known content_length: connection closed before all data received (error)
+  // - Chunked encoding: all chunks received (is_chunk_complete true, genuine EOF)
+  //
+  // Return 0 in both cases. Callers use http_read_loop_result() which calls
+  // is_read_complete() to distinguish these:
+  // - Chunked complete: is_read_complete() returns true (via
+  //   esp_http_client_is_complete_data_received()), caller gets COMPLETE
+  // - Non-chunked incomplete: is_read_complete() returns false, caller
+  //   eventually gets TIMEOUT (since no more data arrives)
   if (read_len_or_error == 0) {
-    return HTTP_ERROR_CONNECTION_CLOSED;
+    return 0;
   }
 
   // Negative value - error, return the actual error code for debugging

esphome/components/http_request/http_request_idf.h

@@ -16,6 +16,7 @@ class HttpContainerIDF : public HttpContainer {
   HttpContainerIDF(esp_http_client_handle_t client) : client_(client) {}
   int read(uint8_t *buf, size_t max_len) override;
   void end() override;
+  bool is_read_complete() const override;
 
   /// @brief Feeds the watchdog timer if the executing task has one attached
   void feed_wdt();

esphome/components/ld2450/__init__.py

@@ -1,7 +1,8 @@
+from esphome import automation
 import esphome.codegen as cg
 from esphome.components import uart
 import esphome.config_validation as cv
-from esphome.const import CONF_ID, CONF_THROTTLE
+from esphome.const import CONF_ID, CONF_ON_DATA, CONF_THROTTLE, CONF_TRIGGER_ID
 
 AUTO_LOAD = ["ld24xx"]
 DEPENDENCIES = ["uart"]
@@ -11,6 +12,8 @@ MULTI_CONF = True
 ld2450_ns = cg.esphome_ns.namespace("ld2450")
 LD2450Component = ld2450_ns.class_("LD2450Component", cg.Component, uart.UARTDevice)
 
+LD2450DataTrigger = ld2450_ns.class_("LD2450DataTrigger", automation.Trigger.template())
+
 CONF_LD2450_ID = "ld2450_id"
 
 CONFIG_SCHEMA = cv.All(
@@ -20,6 +23,11 @@ CONFIG_SCHEMA = cv.All(
             cv.Optional(CONF_THROTTLE): cv.invalid(
                 f"{CONF_THROTTLE} has been removed; use per-sensor filters, instead"
             ),
+            cv.Optional(CONF_ON_DATA): automation.validate_automation(
+                {
+                    cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(LD2450DataTrigger),
+                }
+            ),
         }
     )
     .extend(uart.UART_DEVICE_SCHEMA)
@@ -45,3 +53,6 @@ async def to_code(config):
     var = cg.new_Pvariable(config[CONF_ID])
     await cg.register_component(var, config)
     await uart.register_uart_device(var, config)
+    for conf in config.get(CONF_ON_DATA, []):
+        trigger = cg.new_Pvariable(conf[CONF_TRIGGER_ID], var)
+        await automation.build_automation(trigger, [], conf)

esphome/components/ld2450/ld2450.cpp

@@ -413,6 +413,10 @@ void LD2450Component::restart_and_read_all_info() {
   this->set_timeout(1500, [this]() { this->read_all_info(); });
 }
 
+void LD2450Component::add_on_data_callback(std::function<void()> &&callback) {
+  this->data_callback_.add(std::move(callback));
+}
+
 // Send command with values to LD2450
 void LD2450Component::send_command_(uint8_t command, const uint8_t *command_value, uint8_t command_value_len) {
   ESP_LOGV(TAG, "Sending COMMAND %02X", command);
@@ -613,6 +617,8 @@ void LD2450Component::handle_periodic_data_() {
     this->still_presence_millis_ = App.get_loop_component_start_time();
   }
 #endif
+
+  this->data_callback_.call();
 }
 
 bool LD2450Component::handle_ack_data_() {

esphome/components/ld2450/ld2450.h

@@ -141,6 +141,9 @@ class LD2450Component : public Component, public uart::UARTDevice {
                       int32_t zone2_x1, int32_t zone2_y1, int32_t zone2_x2, int32_t zone2_y2, int32_t zone3_x1,
                       int32_t zone3_y1, int32_t zone3_x2, int32_t zone3_y2);
 
+  /// Add a callback that will be called after each successfully processed periodic data frame.
+  void add_on_data_callback(std::function<void()> &&callback);
+
  protected:
   void send_command_(uint8_t command_str, const uint8_t *command_value, uint8_t command_value_len);
   void set_config_mode_(bool enable);
@@ -190,6 +193,15 @@ class LD2450Component : public Component, public uart::UARTDevice {
 #ifdef USE_TEXT_SENSOR
   std::array<text_sensor::TextSensor *, 3> direction_text_sensors_{};
 #endif
+
+  LazyCallbackManager<void()> data_callback_;
+};
+
+class LD2450DataTrigger : public Trigger<> {
+ public:
+  explicit LD2450DataTrigger(LD2450Component *parent) {
+    parent->add_on_data_callback([this]() { this->trigger(); });
+  }
 };
 
 }  // namespace esphome::ld2450

esphome/components/pulse_counter/pulse_counter_sensor.cpp

@@ -1,6 +1,11 @@
 #include "pulse_counter_sensor.h"
 #include "esphome/core/log.h"
 
+#ifdef HAS_PCNT
+#include <esp_clk_tree.h>
+#include <hal/pcnt_ll.h>
+#endif
+
 namespace esphome {
 namespace pulse_counter {
 
@@ -56,103 +61,109 @@ pulse_counter_t BasicPulseCounterStorage::read_raw_value() {
 
 #ifdef HAS_PCNT
 bool HwPulseCounterStorage::pulse_counter_setup(InternalGPIOPin *pin) {
-  static pcnt_unit_t next_pcnt_unit = PCNT_UNIT_0;
-  static pcnt_channel_t next_pcnt_channel = PCNT_CHANNEL_0;
   this->pin = pin;
   this->pin->setup();
-  this->pcnt_unit = next_pcnt_unit;
-  this->pcnt_channel = next_pcnt_channel;
-  next_pcnt_unit = pcnt_unit_t(int(next_pcnt_unit) + 1);
-  if (int(next_pcnt_unit) >= PCNT_UNIT_0 + PCNT_UNIT_MAX) {
-    next_pcnt_unit = PCNT_UNIT_0;
-    next_pcnt_channel = pcnt_channel_t(int(next_pcnt_channel) + 1);
+
+  pcnt_unit_config_t unit_config = {
+      .low_limit = INT16_MIN,
+      .high_limit = INT16_MAX,
+      .flags = {.accum_count = true},
+  };
+  esp_err_t error = pcnt_new_unit(&unit_config, &this->pcnt_unit);
+  if (error != ESP_OK) {
+    ESP_LOGE(TAG, "Creating PCNT unit failed: %s", esp_err_to_name(error));
+    return false;
   }
 
-  ESP_LOGCONFIG(TAG,
-                "    PCNT Unit Number: %u\n"
-                "    PCNT Channel Number: %u",
-                this->pcnt_unit, this->pcnt_channel);
+  pcnt_chan_config_t chan_config = {
+      .edge_gpio_num = this->pin->get_pin(),
+      .level_gpio_num = -1,
+  };
+  error = pcnt_new_channel(this->pcnt_unit, &chan_config, &this->pcnt_channel);
+  if (error != ESP_OK) {
+    ESP_LOGE(TAG, "Creating PCNT channel failed: %s", esp_err_to_name(error));
+    return false;
+  }
 
-  pcnt_count_mode_t rising = PCNT_COUNT_DIS, falling = PCNT_COUNT_DIS;
+  pcnt_channel_edge_action_t rising = PCNT_CHANNEL_EDGE_ACTION_HOLD;
+  pcnt_channel_edge_action_t falling = PCNT_CHANNEL_EDGE_ACTION_HOLD;
   switch (this->rising_edge_mode) {
     case PULSE_COUNTER_DISABLE:
-      rising = PCNT_COUNT_DIS;
+      rising = PCNT_CHANNEL_EDGE_ACTION_HOLD;
       break;
     case PULSE_COUNTER_INCREMENT:
-      rising = PCNT_COUNT_INC;
+      rising = PCNT_CHANNEL_EDGE_ACTION_INCREASE;
       break;
     case PULSE_COUNTER_DECREMENT:
-      rising = PCNT_COUNT_DEC;
+      rising = PCNT_CHANNEL_EDGE_ACTION_DECREASE;
       break;
   }
   switch (this->falling_edge_mode) {
     case PULSE_COUNTER_DISABLE:
-      falling = PCNT_COUNT_DIS;
+      falling = PCNT_CHANNEL_EDGE_ACTION_HOLD;
       break;
     case PULSE_COUNTER_INCREMENT:
-      falling = PCNT_COUNT_INC;
+      falling = PCNT_CHANNEL_EDGE_ACTION_INCREASE;
       break;
     case PULSE_COUNTER_DECREMENT:
-      falling = PCNT_COUNT_DEC;
+      falling = PCNT_CHANNEL_EDGE_ACTION_DECREASE;
       break;
   }
 
-  pcnt_config_t pcnt_config = {
-      .pulse_gpio_num = this->pin->get_pin(),
-      .ctrl_gpio_num = PCNT_PIN_NOT_USED,
-      .lctrl_mode = PCNT_MODE_KEEP,
-      .hctrl_mode = PCNT_MODE_KEEP,
-      .pos_mode = rising,
-      .neg_mode = falling,
-      .counter_h_lim = 0,
-      .counter_l_lim = 0,
-      .unit = this->pcnt_unit,
-      .channel = this->pcnt_channel,
-  };
-  esp_err_t error = pcnt_unit_config(&pcnt_config);
+  error = pcnt_channel_set_edge_action(this->pcnt_channel, rising, falling);
   if (error != ESP_OK) {
-    ESP_LOGE(TAG, "Configuring Pulse Counter failed: %s", esp_err_to_name(error));
+    ESP_LOGE(TAG, "Setting PCNT edge action failed: %s", esp_err_to_name(error));
     return false;
   }
 
   if (this->filter_us != 0) {
-    uint16_t filter_val = std::min(static_cast<unsigned int>(this->filter_us * 80u), 1023u);
-    ESP_LOGCONFIG(TAG, "    Filter Value: %" PRIu32 "us (val=%u)", this->filter_us, filter_val);
-    error = pcnt_set_filter_value(this->pcnt_unit, filter_val);
+    uint32_t apb_freq;
+    esp_clk_tree_src_get_freq_hz(SOC_MOD_CLK_APB, ESP_CLK_TREE_SRC_FREQ_PRECISION_CACHED, &apb_freq);
+    uint32_t max_glitch_ns = PCNT_LL_MAX_GLITCH_WIDTH * 1000000u / apb_freq;
+    pcnt_glitch_filter_config_t filter_config = {
+        .max_glitch_ns = std::min(this->filter_us * 1000u, max_glitch_ns),
+    };
+    error = pcnt_unit_set_glitch_filter(this->pcnt_unit, &filter_config);
     if (error != ESP_OK) {
-      ESP_LOGE(TAG, "Setting filter value failed: %s", esp_err_to_name(error));
-      return false;
-    }
-    error = pcnt_filter_enable(this->pcnt_unit);
-    if (error != ESP_OK) {
-      ESP_LOGE(TAG, "Enabling filter failed: %s", esp_err_to_name(error));
+      ESP_LOGE(TAG, "Setting PCNT glitch filter failed: %s", esp_err_to_name(error));
       return false;
     }
   }
 
-  error = pcnt_counter_pause(this->pcnt_unit);
+  error = pcnt_unit_add_watch_point(this->pcnt_unit, INT16_MIN);
   if (error != ESP_OK) {
-    ESP_LOGE(TAG, "Pausing pulse counter failed: %s", esp_err_to_name(error));
+    ESP_LOGE(TAG, "Adding PCNT low limit watch point failed: %s", esp_err_to_name(error));
     return false;
   }
-  error = pcnt_counter_clear(this->pcnt_unit);
+  error = pcnt_unit_add_watch_point(this->pcnt_unit, INT16_MAX);
   if (error != ESP_OK) {
-    ESP_LOGE(TAG, "Clearing pulse counter failed: %s", esp_err_to_name(error));
+    ESP_LOGE(TAG, "Adding PCNT high limit watch point failed: %s", esp_err_to_name(error));
     return false;
   }
-  error = pcnt_counter_resume(this->pcnt_unit);
+
+  error = pcnt_unit_enable(this->pcnt_unit);
   if (error != ESP_OK) {
-    ESP_LOGE(TAG, "Resuming pulse counter failed: %s", esp_err_to_name(error));
+    ESP_LOGE(TAG, "Enabling PCNT unit failed: %s", esp_err_to_name(error));
+    return false;
+  }
+  error = pcnt_unit_clear_count(this->pcnt_unit);
+  if (error != ESP_OK) {
+    ESP_LOGE(TAG, "Clearing PCNT unit failed: %s", esp_err_to_name(error));
+    return false;
+  }
+  error = pcnt_unit_start(this->pcnt_unit);
+  if (error != ESP_OK) {
+    ESP_LOGE(TAG, "Starting PCNT unit failed: %s", esp_err_to_name(error));
     return false;
   }
   return true;
 }
 
 pulse_counter_t HwPulseCounterStorage::read_raw_value() {
-  pulse_counter_t counter;
-  pcnt_get_counter_value(this->pcnt_unit, &counter);
-  pulse_counter_t ret = counter - this->last_value;
-  this->last_value = counter;
+  int count;
+  pcnt_unit_get_count(this->pcnt_unit, &count);
+  pulse_counter_t ret = count - this->last_value;
+  this->last_value = count;
   return ret;
 }
 #endif  // HAS_PCNT

esphome/components/pulse_counter/pulse_counter_sensor.h

@@ -6,14 +6,13 @@
 
 #include <cinttypes>
 
-// TODO: Migrate from legacy PCNT API (driver/pcnt.h) to new PCNT API (driver/pulse_cnt.h)
-// The legacy PCNT API is deprecated in ESP-IDF 5.x. Migration would allow removing the
-// "driver" IDF component dependency. See:
-// https://docs.espressif.com/projects/esp-idf/en/latest/esp32/migration-guides/release-5.x/5.0/peripherals.html#id6
-#if defined(USE_ESP32) && !defined(USE_ESP32_VARIANT_ESP32C3)
-#include <driver/pcnt.h>
+#if defined(USE_ESP32)
+#include <soc/soc_caps.h>
+#ifdef SOC_PCNT_SUPPORTED
+#include <driver/pulse_cnt.h>
 #define HAS_PCNT
-#endif  // defined(USE_ESP32) && !defined(USE_ESP32_VARIANT_ESP32C3)
+#endif  // SOC_PCNT_SUPPORTED
+#endif  // USE_ESP32
 
 namespace esphome {
 namespace pulse_counter {
@@ -24,11 +23,7 @@ enum PulseCounterCountMode {
   PULSE_COUNTER_DECREMENT,
 };
 
-#ifdef HAS_PCNT
-using pulse_counter_t = int16_t;
-#else   // HAS_PCNT
 using pulse_counter_t = int32_t;
-#endif  // HAS_PCNT
 
 struct PulseCounterStorageBase {
   virtual bool pulse_counter_setup(InternalGPIOPin *pin) = 0;
@@ -58,8 +53,8 @@ struct HwPulseCounterStorage : public PulseCounterStorageBase {
   bool pulse_counter_setup(InternalGPIOPin *pin) override;
   pulse_counter_t read_raw_value() override;
 
-  pcnt_unit_t pcnt_unit;
-  pcnt_channel_t pcnt_channel;
+  pcnt_unit_handle_t pcnt_unit{nullptr};
+  pcnt_channel_handle_t pcnt_channel{nullptr};
 };
 #endif  // HAS_PCNT
 

esphome/components/pulse_counter/sensor.py

@@ -129,10 +129,7 @@ CONFIG_SCHEMA = cv.All(
 async def to_code(config):
     use_pcnt = config.get(CONF_USE_PCNT)
     if CORE.is_esp32 and use_pcnt:
-        # Re-enable ESP-IDF's legacy driver component (excluded by default to save compile time)
-        # Provides driver/pcnt.h header for hardware pulse counter API
-        # TODO: Remove this once pulse_counter migrates to new PCNT API (driver/pulse_cnt.h)
-        include_builtin_idf_component("driver")
+        include_builtin_idf_component("esp_driver_pcnt")
 
     var = await sensor.new_sensor(config, use_pcnt)
     await cg.register_component(var, config)

esphome/components/remote_receiver/remote_receiver_esp32.cpp

@@ -3,15 +3,11 @@
 
 #ifdef USE_ESP32
 #include <driver/gpio.h>
+#include <esp_clk_tree.h>
 
 namespace esphome::remote_receiver {
 
 static const char *const TAG = "remote_receiver.esp32";
-#ifdef USE_ESP32_VARIANT_ESP32H2
-static const uint32_t RMT_CLK_FREQ = 32000000;
-#else
-static const uint32_t RMT_CLK_FREQ = 80000000;
-#endif
 
 static bool IRAM_ATTR HOT rmt_callback(rmt_channel_handle_t channel, const rmt_rx_done_event_data_t *event, void *arg) {
   RemoteReceiverComponentStore *store = (RemoteReceiverComponentStore *) arg;
@@ -98,7 +94,10 @@ void RemoteReceiverComponent::setup() {
   }
 
   uint32_t event_size = sizeof(rmt_rx_done_event_data_t);
-  uint32_t max_filter_ns = 255u * 1000 / (RMT_CLK_FREQ / 1000000);
+  uint32_t rmt_freq;
+  esp_clk_tree_src_get_freq_hz((soc_module_clk_t) RMT_CLK_SRC_DEFAULT, ESP_CLK_TREE_SRC_FREQ_PRECISION_CACHED,
+                               &rmt_freq);
+  uint32_t max_filter_ns = UINT8_MAX * 1000u / (rmt_freq / 1000000);
   memset(&this->store_.config, 0, sizeof(this->store_.config));
   this->store_.config.signal_range_min_ns = std::min(this->filter_us_ * 1000, max_filter_ns);
   this->store_.config.signal_range_max_ns = this->idle_us_ * 1000;

esphome/components/resampler/speaker/__init__.py

@@ -1,5 +1,5 @@
 import esphome.codegen as cg
-from esphome.components import audio, esp32, speaker
+from esphome.components import audio, esp32, socket, speaker
 import esphome.config_validation as cv
 from esphome.const import (
     CONF_BITS_PER_SAMPLE,
@@ -34,7 +34,7 @@ def _set_stream_limits(config):
     return config
 
 
-def _validate_audio_compatability(config):
+def _validate_audio_compatibility(config):
     inherit_property_from(CONF_BITS_PER_SAMPLE, CONF_OUTPUT_SPEAKER)(config)
     inherit_property_from(CONF_NUM_CHANNELS, CONF_OUTPUT_SPEAKER)(config)
     inherit_property_from(CONF_SAMPLE_RATE, CONF_OUTPUT_SPEAKER)(config)
@@ -73,10 +73,13 @@ CONFIG_SCHEMA = cv.All(
 )
 
 
-FINAL_VALIDATE_SCHEMA = _validate_audio_compatability
+FINAL_VALIDATE_SCHEMA = _validate_audio_compatibility
 
 
 async def to_code(config):
+    # Enable wake_loop_threadsafe for immediate command processing from other tasks
+    socket.require_wake_loop_threadsafe()
+
     var = cg.new_Pvariable(config[CONF_ID])
     await cg.register_component(var, config)
     await speaker.register_speaker(var, config)
@@ -86,12 +89,11 @@ async def to_code(config):
 
     cg.add(var.set_buffer_duration(config[CONF_BUFFER_DURATION]))
 
-    if task_stack_in_psram := config.get(CONF_TASK_STACK_IN_PSRAM):
-        cg.add(var.set_task_stack_in_psram(task_stack_in_psram))
-        if task_stack_in_psram and config[CONF_TASK_STACK_IN_PSRAM]:
-            esp32.add_idf_sdkconfig_option(
-                "CONFIG_SPIRAM_ALLOW_STACK_EXTERNAL_MEMORY", True
-            )
+    if config.get(CONF_TASK_STACK_IN_PSRAM):
+        cg.add(var.set_task_stack_in_psram(True))
+        esp32.add_idf_sdkconfig_option(
+            "CONFIG_SPIRAM_ALLOW_STACK_EXTERNAL_MEMORY", True
+        )
 
     cg.add(var.set_target_bits_per_sample(config[CONF_BITS_PER_SAMPLE]))
     cg.add(var.set_target_sample_rate(config[CONF_SAMPLE_RATE]))

esphome/components/resampler/speaker/resampler_speaker.cpp

@@ -4,6 +4,8 @@
 
 #include "esphome/components/audio/audio_resampler.h"
 
+#include "esphome/core/application.h"
+#include "esphome/core/defines.h"
 #include "esphome/core/helpers.h"
 #include "esphome/core/log.h"
 
@@ -17,13 +19,17 @@ static const UBaseType_t RESAMPLER_TASK_PRIORITY = 1;
 
 static const uint32_t TRANSFER_BUFFER_DURATION_MS = 50;
 
-static const uint32_t TASK_DELAY_MS = 20;
 static const uint32_t TASK_STACK_SIZE = 3072;
 
+static const uint32_t STATE_TRANSITION_TIMEOUT_MS = 5000;
+
 static const char *const TAG = "resampler_speaker";
 
 enum ResamplingEventGroupBits : uint32_t {
-  COMMAND_STOP = (1 << 0),  // stops the resampler task
+  COMMAND_STOP = (1 << 0),       // signals stop request
+  COMMAND_START = (1 << 1),      // signals start request
+  COMMAND_FINISH = (1 << 2),     // signals finish request (graceful stop)
+  TASK_COMMAND_STOP = (1 << 5),  // signals the task to stop
   STATE_STARTING = (1 << 10),
   STATE_RUNNING = (1 << 11),
   STATE_STOPPING = (1 << 12),
@@ -34,9 +40,16 @@ enum ResamplingEventGroupBits : uint32_t {
   ALL_BITS = 0x00FFFFFF,  // All valid FreeRTOS event group bits
 };
 
+void ResamplerSpeaker::dump_config() {
+  ESP_LOGCONFIG(TAG,
+                "Resampler Speaker:\n"
+                "  Target Bits Per Sample: %u\n"
+                "  Target Sample Rate: %" PRIu32 " Hz",
+                this->target_bits_per_sample_, this->target_sample_rate_);
+}
+
 void ResamplerSpeaker::setup() {
   this->event_group_ = xEventGroupCreate();
-
   if (this->event_group_ == nullptr) {
     ESP_LOGE(TAG, "Failed to create event group");
     this->mark_failed();
@@ -55,81 +68,155 @@ void ResamplerSpeaker::setup() {
       this->audio_output_callback_(new_frames, write_timestamp);
     }
   });
+
+  // Start with loop disabled since no task is running and no commands are pending
+  this->disable_loop();
 }
 
 void ResamplerSpeaker::loop() {
   uint32_t event_group_bits = xEventGroupGetBits(this->event_group_);
 
+  // Process commands with priority: STOP > FINISH > START
+  // This ensures stop commands take precedence over conflicting start commands
+  if (event_group_bits & ResamplingEventGroupBits::COMMAND_STOP) {
+    if (this->state_ == speaker::STATE_RUNNING || this->state_ == speaker::STATE_STARTING) {
+      // Clear STOP, START, and FINISH bits - stop takes precedence
+      xEventGroupClearBits(this->event_group_, ResamplingEventGroupBits::COMMAND_STOP |
+                                                   ResamplingEventGroupBits::COMMAND_START |
+                                                   ResamplingEventGroupBits::COMMAND_FINISH);
+      this->waiting_for_output_ = false;
+      this->enter_stopping_state_();
+    } else if (this->state_ == speaker::STATE_STOPPED) {
+      // Already stopped, just clear the command bits
+      xEventGroupClearBits(this->event_group_, ResamplingEventGroupBits::COMMAND_STOP |
+                                                   ResamplingEventGroupBits::COMMAND_START |
+                                                   ResamplingEventGroupBits::COMMAND_FINISH);
+    }
+    // Leave bits set if STATE_STOPPING - will be processed once stopped
+  } else if (event_group_bits & ResamplingEventGroupBits::COMMAND_FINISH) {
+    if (this->state_ == speaker::STATE_RUNNING) {
+      xEventGroupClearBits(this->event_group_, ResamplingEventGroupBits::COMMAND_FINISH);
+      this->output_speaker_->finish();
+    } else if (this->state_ == speaker::STATE_STOPPED) {
+      // Already stopped, just clear the command bit
+      xEventGroupClearBits(this->event_group_, ResamplingEventGroupBits::COMMAND_FINISH);
+    }
+    // Leave bit set if transitioning states - will be processed once state allows
+  } else if (event_group_bits & ResamplingEventGroupBits::COMMAND_START) {
+    if (this->state_ == speaker::STATE_STOPPED) {
+      xEventGroupClearBits(this->event_group_, ResamplingEventGroupBits::COMMAND_START);
+      this->state_ = speaker::STATE_STARTING;
+    } else if (this->state_ == speaker::STATE_RUNNING) {
+      // Already running, just clear the command bit
+      xEventGroupClearBits(this->event_group_, ResamplingEventGroupBits::COMMAND_START);
+    }
+    // Leave bit set if transitioning states - will be processed once state allows
+  }
+
+  // Re-read bits after command processing (enter_stopping_state_ may have set task bits)
+  event_group_bits = xEventGroupGetBits(this->event_group_);
+
   if (event_group_bits & ResamplingEventGroupBits::STATE_STARTING) {
-    ESP_LOGD(TAG, "Starting resampler task");
+    ESP_LOGD(TAG, "Starting");
     xEventGroupClearBits(this->event_group_, ResamplingEventGroupBits::STATE_STARTING);
   }
 
   if (event_group_bits & ResamplingEventGroupBits::ERR_ESP_NO_MEM) {
-    this->status_set_error(LOG_STR("Resampler task failed to allocate the internal buffers"));
+    this->status_set_error(LOG_STR("Not enough memory"));
     xEventGroupClearBits(this->event_group_, ResamplingEventGroupBits::ERR_ESP_NO_MEM);
-    this->state_ = speaker::STATE_STOPPING;
+    this->enter_stopping_state_();
   }
   if (event_group_bits & ResamplingEventGroupBits::ERR_ESP_NOT_SUPPORTED) {
-    this->status_set_error(LOG_STR("Cannot resample due to an unsupported audio stream"));
+    this->status_set_error(LOG_STR("Unsupported stream"));
     xEventGroupClearBits(this->event_group_, ResamplingEventGroupBits::ERR_ESP_NOT_SUPPORTED);
-    this->state_ = speaker::STATE_STOPPING;
+    this->enter_stopping_state_();
   }
   if (event_group_bits & ResamplingEventGroupBits::ERR_ESP_FAIL) {
-    this->status_set_error(LOG_STR("Resampler task failed"));
+    this->status_set_error(LOG_STR("Resampler failure"));
     xEventGroupClearBits(this->event_group_, ResamplingEventGroupBits::ERR_ESP_FAIL);
-    this->state_ = speaker::STATE_STOPPING;
+    this->enter_stopping_state_();
   }
 
   if (event_group_bits & ResamplingEventGroupBits::STATE_RUNNING) {
-    ESP_LOGD(TAG, "Started resampler task");
+    ESP_LOGV(TAG, "Started");
     this->status_clear_error();
     xEventGroupClearBits(this->event_group_, ResamplingEventGroupBits::STATE_RUNNING);
   }
   if (event_group_bits & ResamplingEventGroupBits::STATE_STOPPING) {
-    ESP_LOGD(TAG, "Stopping resampler task");
+    ESP_LOGV(TAG, "Stopping");
     xEventGroupClearBits(this->event_group_, ResamplingEventGroupBits::STATE_STOPPING);
   }
   if (event_group_bits & ResamplingEventGroupBits::STATE_STOPPED) {
-    if (this->delete_task_() == ESP_OK) {
-      ESP_LOGD(TAG, "Stopped resampler task");
-      xEventGroupClearBits(this->event_group_, ResamplingEventGroupBits::ALL_BITS);
-    }
+    this->delete_task_();
+    ESP_LOGD(TAG, "Stopped");
+    xEventGroupClearBits(this->event_group_, ResamplingEventGroupBits::ALL_BITS);
   }
 
   switch (this->state_) {
     case speaker::STATE_STARTING: {
-      esp_err_t err = this->start_();
-      if (err == ESP_OK) {
-        this->status_clear_error();
-        this->state_ = speaker::STATE_RUNNING;
-      } else {
-        switch (err) {
-          case ESP_ERR_INVALID_STATE:
-            this->status_set_error(LOG_STR("Failed to start resampler: resampler task failed to start"));
-            break;
-          case ESP_ERR_NO_MEM:
-            this->status_set_error(LOG_STR("Failed to start resampler: not enough memory for task stack"));
-          default:
-            this->status_set_error(LOG_STR("Failed to start resampler"));
-            break;
+      if (!this->waiting_for_output_) {
+        esp_err_t err = this->start_();
+        if (err == ESP_OK) {
+          this->callback_remainder_ = 0;  // reset callback remainder
+          this->status_clear_error();
+          this->waiting_for_output_ = true;
+          this->state_start_ms_ = App.get_loop_component_start_time();
+        } else {
+          this->set_start_error_(err);
+          this->waiting_for_output_ = false;
+          this->enter_stopping_state_();
+        }
+      } else {
+        if (this->output_speaker_->is_running()) {
+          this->state_ = speaker::STATE_RUNNING;
+          this->waiting_for_output_ = false;
+        } else if ((App.get_loop_component_start_time() - this->state_start_ms_) > STATE_TRANSITION_TIMEOUT_MS) {
+          // Timed out waiting for the output speaker to start
+          this->waiting_for_output_ = false;
+          this->enter_stopping_state_();
         }
-
-        this->state_ = speaker::STATE_STOPPING;
       }
       break;
     }
     case speaker::STATE_RUNNING:
       if (this->output_speaker_->is_stopped()) {
-        this->state_ = speaker::STATE_STOPPING;
+        this->enter_stopping_state_();
+      }
+      break;
+    case speaker::STATE_STOPPING: {
+      if ((this->output_speaker_->get_pause_state()) ||
+          ((App.get_loop_component_start_time() - this->state_start_ms_) > STATE_TRANSITION_TIMEOUT_MS)) {
+        // If output speaker is paused or stopping timeout exceeded, force stop
+        this->output_speaker_->stop();
       }
 
+      if (this->output_speaker_->is_stopped() && (this->task_handle_ == nullptr)) {
+        // Only transition to stopped state once the output speaker and resampler task are fully stopped
+        this->waiting_for_output_ = false;
+        this->state_ = speaker::STATE_STOPPED;
+      }
       break;
-    case speaker::STATE_STOPPING:
-      this->stop_();
-      this->state_ = speaker::STATE_STOPPED;
-      break;
+    }
     case speaker::STATE_STOPPED:
+      event_group_bits = xEventGroupGetBits(this->event_group_);
+      if (event_group_bits == 0) {
+        // No pending events, disable loop to save CPU cycles
+        this->disable_loop();
+      }
+      break;
+  }
+}
+
+void ResamplerSpeaker::set_start_error_(esp_err_t err) {
+  switch (err) {
+    case ESP_ERR_INVALID_STATE:
+      this->status_set_error(LOG_STR("Task failed to start"));
+      break;
+    case ESP_ERR_NO_MEM:
+      this->status_set_error(LOG_STR("Not enough memory"));
+      break;
+    default:
+      this->status_set_error(LOG_STR("Failed to start"));
       break;
   }
 }
@@ -143,16 +230,33 @@ size_t ResamplerSpeaker::play(const uint8_t *data, size_t length, TickType_t tic
   if ((this->output_speaker_->is_running()) && (!this->requires_resampling_())) {
     bytes_written = this->output_speaker_->play(data, length, ticks_to_wait);
   } else {
-    if (this->ring_buffer_.use_count() == 1) {
-      std::shared_ptr<RingBuffer> temp_ring_buffer = this->ring_buffer_.lock();
+    std::shared_ptr<RingBuffer> temp_ring_buffer = this->ring_buffer_.lock();
+    if (temp_ring_buffer) {
+      // Only write to the ring buffer if the reference is valid
       bytes_written = temp_ring_buffer->write_without_replacement(data, length, ticks_to_wait);
+    } else {
+      // Delay to avoid repeatedly hammering while waiting for the speaker to start
+      vTaskDelay(ticks_to_wait);
     }
   }
 
   return bytes_written;
 }
 
-void ResamplerSpeaker::start() { this->state_ = speaker::STATE_STARTING; }
+void ResamplerSpeaker::send_command_(uint32_t command_bit, bool wake_loop) {
+  this->enable_loop_soon_any_context();
+  uint32_t event_bits = xEventGroupGetBits(this->event_group_);
+  if (!(event_bits & command_bit)) {
+    xEventGroupSetBits(this->event_group_, command_bit);
+#if defined(USE_SOCKET_SELECT_SUPPORT) && defined(USE_WAKE_LOOP_THREADSAFE)
+    if (wake_loop) {
+      App.wake_loop_threadsafe();
+    }
+#endif
+  }
+}
+
+void ResamplerSpeaker::start() { this->send_command_(ResamplingEventGroupBits::COMMAND_START, true); }
 
 esp_err_t ResamplerSpeaker::start_() {
   this->target_stream_info_ = audio::AudioStreamInfo(
@@ -185,7 +289,7 @@ esp_err_t ResamplerSpeaker::start_task_() {
   }
 
   if (this->task_handle_ == nullptr) {
-    this->task_handle_ = xTaskCreateStatic(resample_task, "sample", TASK_STACK_SIZE, (void *) this,
+    this->task_handle_ = xTaskCreateStatic(resample_task, "resampler", TASK_STACK_SIZE, (void *) this,
                                            RESAMPLER_TASK_PRIORITY, this->task_stack_buffer_, &this->task_stack_);
   }
 
@@ -196,43 +300,47 @@ esp_err_t ResamplerSpeaker::start_task_() {
   return ESP_OK;
 }
 
-void ResamplerSpeaker::stop() { this->state_ = speaker::STATE_STOPPING; }
+void ResamplerSpeaker::stop() { this->send_command_(ResamplingEventGroupBits::COMMAND_STOP); }
 
-void ResamplerSpeaker::stop_() {
+void ResamplerSpeaker::enter_stopping_state_() {
+  this->state_ = speaker::STATE_STOPPING;
+  this->state_start_ms_ = App.get_loop_component_start_time();
   if (this->task_handle_ != nullptr) {
-    xEventGroupSetBits(this->event_group_, ResamplingEventGroupBits::COMMAND_STOP);
+    xEventGroupSetBits(this->event_group_, ResamplingEventGroupBits::TASK_COMMAND_STOP);
   }
   this->output_speaker_->stop();
 }
 
-esp_err_t ResamplerSpeaker::delete_task_() {
-  if (!this->task_created_) {
+void ResamplerSpeaker::delete_task_() {
+  if (this->task_handle_ != nullptr) {
+    // Delete the suspended task
+    vTaskDelete(this->task_handle_);
     this->task_handle_ = nullptr;
-
-    if (this->task_stack_buffer_ != nullptr) {
-      if (this->task_stack_in_psram_) {
-        RAMAllocator<StackType_t> stack_allocator(RAMAllocator<StackType_t>::ALLOC_EXTERNAL);
-        stack_allocator.deallocate(this->task_stack_buffer_, TASK_STACK_SIZE);
-      } else {
-        RAMAllocator<StackType_t> stack_allocator(RAMAllocator<StackType_t>::ALLOC_INTERNAL);
-        stack_allocator.deallocate(this->task_stack_buffer_, TASK_STACK_SIZE);
-      }
-
-      this->task_stack_buffer_ = nullptr;
-    }
-
-    return ESP_OK;
   }
 
-  return ESP_ERR_INVALID_STATE;
+  if (this->task_stack_buffer_ != nullptr) {
+    // Deallocate the task stack buffer
+    if (this->task_stack_in_psram_) {
+      RAMAllocator<StackType_t> stack_allocator(RAMAllocator<StackType_t>::ALLOC_EXTERNAL);
+      stack_allocator.deallocate(this->task_stack_buffer_, TASK_STACK_SIZE);
+    } else {
+      RAMAllocator<StackType_t> stack_allocator(RAMAllocator<StackType_t>::ALLOC_INTERNAL);
+      stack_allocator.deallocate(this->task_stack_buffer_, TASK_STACK_SIZE);
+    }
+
+    this->task_stack_buffer_ = nullptr;
+  }
 }
 
-void ResamplerSpeaker::finish() { this->output_speaker_->finish(); }
+void ResamplerSpeaker::finish() { this->send_command_(ResamplingEventGroupBits::COMMAND_FINISH); }
 
 bool ResamplerSpeaker::has_buffered_data() const {
   bool has_ring_buffer_data = false;
-  if (this->requires_resampling_() && (this->ring_buffer_.use_count() > 0)) {
-    has_ring_buffer_data = (this->ring_buffer_.lock()->available() > 0);
+  if (this->requires_resampling_()) {
+    std::shared_ptr<RingBuffer> temp_ring_buffer = this->ring_buffer_.lock();
+    if (temp_ring_buffer) {
+      has_ring_buffer_data = (temp_ring_buffer->available() > 0);
+    }
   }
   return (has_ring_buffer_data || this->output_speaker_->has_buffered_data());
 }
@@ -253,9 +361,8 @@ bool ResamplerSpeaker::requires_resampling_() const {
 }
 
 void ResamplerSpeaker::resample_task(void *params) {
-  ResamplerSpeaker *this_resampler = (ResamplerSpeaker *) params;
+  ResamplerSpeaker *this_resampler = static_cast<ResamplerSpeaker *>(params);
 
-  this_resampler->task_created_ = true;
   xEventGroupSetBits(this_resampler->event_group_, ResamplingEventGroupBits::STATE_STARTING);
 
   std::unique_ptr<audio::AudioResampler> resampler =
@@ -269,7 +376,7 @@ void ResamplerSpeaker::resample_task(void *params) {
     std::shared_ptr<RingBuffer> temp_ring_buffer =
         RingBuffer::create(this_resampler->audio_stream_info_.ms_to_bytes(this_resampler->buffer_duration_ms_));
 
-    if (temp_ring_buffer.use_count() == 0) {
+    if (!temp_ring_buffer) {
       err = ESP_ERR_NO_MEM;
     } else {
       this_resampler->ring_buffer_ = temp_ring_buffer;
@@ -291,7 +398,7 @@ void ResamplerSpeaker::resample_task(void *params) {
   while (err == ESP_OK) {
     uint32_t event_bits = xEventGroupGetBits(this_resampler->event_group_);
 
-    if (event_bits & ResamplingEventGroupBits::COMMAND_STOP) {
+    if (event_bits & ResamplingEventGroupBits::TASK_COMMAND_STOP) {
       break;
     }
 
@@ -310,8 +417,8 @@ void ResamplerSpeaker::resample_task(void *params) {
   xEventGroupSetBits(this_resampler->event_group_, ResamplingEventGroupBits::STATE_STOPPING);
   resampler.reset();
   xEventGroupSetBits(this_resampler->event_group_, ResamplingEventGroupBits::STATE_STOPPED);
-  this_resampler->task_created_ = false;
-  vTaskDelete(nullptr);
+
+  vTaskSuspend(nullptr);  // Suspend this task indefinitely until the loop method deletes it
 }
 
 }  // namespace resampler

esphome/components/resampler/speaker/resampler_speaker.h

@@ -8,14 +8,16 @@
 
 #include "esphome/core/component.h"
 
-#include <freertos/event_groups.h>
 #include <freertos/FreeRTOS.h>
+#include <freertos/event_groups.h>
 
 namespace esphome {
 namespace resampler {
 
 class ResamplerSpeaker : public Component, public speaker::Speaker {
  public:
+  float get_setup_priority() const override { return esphome::setup_priority::DATA; }
+  void dump_config() override;
   void setup() override;
   void loop() override;
 
@@ -65,13 +67,18 @@ class ResamplerSpeaker : public Component, public speaker::Speaker {
   ///         ESP_ERR_INVALID_STATE if the task wasn't created
   esp_err_t start_task_();
 
-  /// @brief Stops the output speaker. If the resampling task is running, it sends the stop command.
-  void stop_();
+  /// @brief Transitions to STATE_STOPPING, records the stopping timestamp, sends the task stop command if the task is
+  /// running, and stops the output speaker.
+  void enter_stopping_state_();
 
-  /// @brief Deallocates the task stack and resets the pointers.
-  /// @return ESP_OK if successful
-  ///         ESP_ERR_INVALID_STATE if the task hasn't stopped itself
-  esp_err_t delete_task_();
+  /// @brief Sets the appropriate status error based on the start failure reason.
+  void set_start_error_(esp_err_t err);
+
+  /// @brief Deletes the resampler task if suspended, deallocates the task stack, and resets the related pointers.
+  void delete_task_();
+
+  /// @brief Sends a command via event group bits, enables the loop, and optionally wakes the main loop.
+  void send_command_(uint32_t command_bit, bool wake_loop = false);
 
   inline bool requires_resampling_() const;
   static void resample_task(void *params);
@@ -83,7 +90,7 @@ class ResamplerSpeaker : public Component, public speaker::Speaker {
   speaker::Speaker *output_speaker_{nullptr};
 
   bool task_stack_in_psram_{false};
-  bool task_created_{false};
+  bool waiting_for_output_{false};
 
   TaskHandle_t task_handle_{nullptr};
   StaticTask_t task_stack_;
@@ -98,6 +105,7 @@ class ResamplerSpeaker : public Component, public speaker::Speaker {
   uint32_t target_sample_rate_;
 
   uint32_t buffer_duration_ms_;
+  uint32_t state_start_ms_{0};
 
   uint64_t callback_remainder_{0};
 };

esphome/components/socket/bsd_sockets_impl.cpp

@@ -16,19 +16,13 @@ namespace esphome::socket {
 
 class BSDSocketImpl final : public Socket {
  public:
-  BSDSocketImpl(int fd, bool monitor_loop = false) : fd_(fd) {
-#ifdef USE_SOCKET_SELECT_SUPPORT
+  BSDSocketImpl(int fd, bool monitor_loop = false) {
+    this->fd_ = fd;
     // Register new socket with the application for select() if monitoring requested
     if (monitor_loop && this->fd_ >= 0) {
       // Only set loop_monitored_ to true if registration succeeds
       this->loop_monitored_ = App.register_socket_fd(this->fd_);
-    } else {
-      this->loop_monitored_ = false;
     }
-#else
-    // Without select support, ignore monitor_loop parameter
-    (void) monitor_loop;
-#endif
   }
   ~BSDSocketImpl() override {
     if (!this->closed_) {
@@ -52,12 +46,10 @@ class BSDSocketImpl final : public Socket {
   int bind(const struct sockaddr *addr, socklen_t addrlen) override { return ::bind(this->fd_, addr, addrlen); }
   int close() override {
     if (!this->closed_) {
-#ifdef USE_SOCKET_SELECT_SUPPORT
       // Unregister from select() before closing if monitored
       if (this->loop_monitored_) {
         App.unregister_socket_fd(this->fd_);
       }
-#endif
       int ret = ::close(this->fd_);
       this->closed_ = true;
       return ret;
@@ -130,23 +122,6 @@ class BSDSocketImpl final : public Socket {
     ::fcntl(this->fd_, F_SETFL, fl);
     return 0;
   }
-
-  int get_fd() const override { return this->fd_; }
-
-#ifdef USE_SOCKET_SELECT_SUPPORT
-  bool ready() const override {
-    if (!this->loop_monitored_)
-      return true;
-    return App.is_socket_ready(this->fd_);
-  }
-#endif
-
- protected:
-  int fd_;
-  bool closed_{false};
-#ifdef USE_SOCKET_SELECT_SUPPORT
-  bool loop_monitored_{false};
-#endif
 };
 
 // Helper to create a socket with optional monitoring

esphome/components/socket/lwip_sockets_impl.cpp

@@ -11,19 +11,13 @@ namespace esphome::socket {
 
 class LwIPSocketImpl final : public Socket {
  public:
-  LwIPSocketImpl(int fd, bool monitor_loop = false) : fd_(fd) {
-#ifdef USE_SOCKET_SELECT_SUPPORT
+  LwIPSocketImpl(int fd, bool monitor_loop = false) {
+    this->fd_ = fd;
     // Register new socket with the application for select() if monitoring requested
     if (monitor_loop && this->fd_ >= 0) {
       // Only set loop_monitored_ to true if registration succeeds
       this->loop_monitored_ = App.register_socket_fd(this->fd_);
-    } else {
-      this->loop_monitored_ = false;
     }
-#else
-    // Without select support, ignore monitor_loop parameter
-    (void) monitor_loop;
-#endif
   }
   ~LwIPSocketImpl() override {
     if (!this->closed_) {
@@ -49,12 +43,10 @@ class LwIPSocketImpl final : public Socket {
   int bind(const struct sockaddr *addr, socklen_t addrlen) override { return lwip_bind(this->fd_, addr, addrlen); }
   int close() override {
     if (!this->closed_) {
-#ifdef USE_SOCKET_SELECT_SUPPORT
       // Unregister from select() before closing if monitored
       if (this->loop_monitored_) {
         App.unregister_socket_fd(this->fd_);
       }
-#endif
       int ret = lwip_close(this->fd_);
       this->closed_ = true;
       return ret;
@@ -97,23 +89,6 @@ class LwIPSocketImpl final : public Socket {
     lwip_fcntl(this->fd_, F_SETFL, fl);
     return 0;
   }
-
-  int get_fd() const override { return this->fd_; }
-
-#ifdef USE_SOCKET_SELECT_SUPPORT
-  bool ready() const override {
-    if (!this->loop_monitored_)
-      return true;
-    return App.is_socket_ready(this->fd_);
-  }
-#endif
-
- protected:
-  int fd_;
-  bool closed_{false};
-#ifdef USE_SOCKET_SELECT_SUPPORT
-  bool loop_monitored_{false};
-#endif
 };
 
 // Helper to create a socket with optional monitoring

esphome/components/socket/socket.cpp

@@ -10,6 +10,14 @@ namespace esphome::socket {
 
 Socket::~Socket() {}
 
+bool Socket::ready() const {
+#ifdef USE_SOCKET_SELECT_SUPPORT
+  return !this->loop_monitored_ || App.is_socket_ready_(this->fd_);
+#else
+  return true;
+#endif
+}
+
 // Platform-specific inet_ntop wrappers
 #if defined(USE_SOCKET_IMPL_LWIP_TCP)
 // LWIP raw TCP (ESP8266) uses inet_ntoa_r which takes struct by value

esphome/components/socket/socket.h

@@ -63,13 +63,25 @@ class Socket {
   virtual int setblocking(bool blocking) = 0;
   virtual int loop() { return 0; };
 
-  /// Get the underlying file descriptor (returns -1 if not supported)
-  virtual int get_fd() const { return -1; }
+    /// Get the underlying file descriptor (returns -1 if not supported)
+    /// Non-virtual: only one socket implementation is active per build.
+#ifdef USE_SOCKET_SELECT_SUPPORT
+  int get_fd() const { return this->fd_; }
+#else
+  int get_fd() const { return -1; }
+#endif
 
-  /// Check if socket has data ready to read
-  /// For loop-monitored sockets, checks with the Application's select() results
+  /// Check if socket has data ready to read (non-virtual for direct call)
+  /// For loop-monitored sockets, checks the Application's select() results
   /// For non-monitored sockets, always returns true (assumes data may be available)
-  virtual bool ready() const { return true; }
+  bool ready() const;
+
+ protected:
+#ifdef USE_SOCKET_SELECT_SUPPORT
+  int fd_{-1};
+  bool closed_{false};
+  bool loop_monitored_{false};
+#endif
 };
 
 /// Create a socket of the given domain, type and protocol.

esphome/components/template/water_heater/__init__.py

@@ -3,6 +3,7 @@ import esphome.codegen as cg
 from esphome.components import water_heater
 import esphome.config_validation as cv
 from esphome.const import (
+    CONF_AWAY,
     CONF_ID,
     CONF_MODE,
     CONF_OPTIMISTIC,
@@ -18,6 +19,7 @@ from esphome.types import ConfigType
 from .. import template_ns
 
 CONF_CURRENT_TEMPERATURE = "current_temperature"
+CONF_IS_ON = "is_on"
 
 TemplateWaterHeater = template_ns.class_(
     "TemplateWaterHeater", cg.Component, water_heater.WaterHeater
@@ -51,6 +53,8 @@ CONFIG_SCHEMA = (
             cv.Optional(CONF_SUPPORTED_MODES): cv.ensure_list(
                 water_heater.validate_water_heater_mode
             ),
+            cv.Optional(CONF_AWAY): cv.returning_lambda,
+            cv.Optional(CONF_IS_ON): cv.returning_lambda,
         }
     )
     .extend(cv.COMPONENT_SCHEMA)
@@ -98,6 +102,22 @@ async def to_code(config: ConfigType) -> None:
     if CONF_SUPPORTED_MODES in config:
         cg.add(var.set_supported_modes(config[CONF_SUPPORTED_MODES]))
 
+    if CONF_AWAY in config:
+        template_ = await cg.process_lambda(
+            config[CONF_AWAY],
+            [],
+            return_type=cg.optional.template(bool),
+        )
+        cg.add(var.set_away_lambda(template_))
+
+    if CONF_IS_ON in config:
+        template_ = await cg.process_lambda(
+            config[CONF_IS_ON],
+            [],
+            return_type=cg.optional.template(bool),
+        )
+        cg.add(var.set_is_on_lambda(template_))
+
 
 @automation.register_action(
     "water_heater.template.publish",
@@ -110,6 +130,8 @@ async def to_code(config: ConfigType) -> None:
             cv.Optional(CONF_MODE): cv.templatable(
                 water_heater.validate_water_heater_mode
             ),
+            cv.Optional(CONF_AWAY): cv.templatable(cv.boolean),
+            cv.Optional(CONF_IS_ON): cv.templatable(cv.boolean),
         }
     ),
 )
@@ -134,4 +156,12 @@ async def water_heater_template_publish_to_code(
         template_ = await cg.templatable(mode, args, water_heater.WaterHeaterMode)
         cg.add(var.set_mode(template_))
 
+    if CONF_AWAY in config:
+        template_ = await cg.templatable(config[CONF_AWAY], args, bool)
+        cg.add(var.set_away(template_))
+
+    if CONF_IS_ON in config:
+        template_ = await cg.templatable(config[CONF_IS_ON], args, bool)
+        cg.add(var.set_is_on(template_))
+
     return var

esphome/components/template/water_heater/automation.h

@@ -11,12 +11,15 @@ class TemplateWaterHeaterPublishAction : public Action<Ts...>, public Parented<T
   TEMPLATABLE_VALUE(float, current_temperature)
   TEMPLATABLE_VALUE(float, target_temperature)
   TEMPLATABLE_VALUE(water_heater::WaterHeaterMode, mode)
+  TEMPLATABLE_VALUE(bool, away)
+  TEMPLATABLE_VALUE(bool, is_on)
 
   void play(const Ts &...x) override {
     if (this->current_temperature_.has_value()) {
       this->parent_->set_current_temperature(this->current_temperature_.value(x...));
     }
-    bool needs_call = this->target_temperature_.has_value() || this->mode_.has_value();
+    bool needs_call = this->target_temperature_.has_value() || this->mode_.has_value() || this->away_.has_value() ||
+                      this->is_on_.has_value();
     if (needs_call) {
       auto call = this->parent_->make_call();
       if (this->target_temperature_.has_value()) {
@@ -25,6 +28,12 @@ class TemplateWaterHeaterPublishAction : public Action<Ts...>, public Parented<T
       if (this->mode_.has_value()) {
         call.set_mode(this->mode_.value(x...));
       }
+      if (this->away_.has_value()) {
+        call.set_away(this->away_.value(x...));
+      }
+      if (this->is_on_.has_value()) {
+        call.set_on(this->is_on_.value(x...));
+      }
       call.perform();
     } else {
       this->parent_->publish_state();

esphome/components/template/water_heater/template_water_heater.cpp

@@ -17,7 +17,7 @@ void TemplateWaterHeater::setup() {
     }
   }
   if (!this->current_temperature_f_.has_value() && !this->target_temperature_f_.has_value() &&
-      !this->mode_f_.has_value())
+      !this->mode_f_.has_value() && !this->away_f_.has_value() && !this->is_on_f_.has_value())
     this->disable_loop();
 }
 
@@ -32,6 +32,12 @@ water_heater::WaterHeaterTraits TemplateWaterHeater::traits() {
   if (this->target_temperature_f_.has_value()) {
     traits.add_feature_flags(water_heater::WATER_HEATER_SUPPORTS_TARGET_TEMPERATURE);
   }
+  if (this->away_f_.has_value()) {
+    traits.set_supports_away_mode(true);
+  }
+  if (this->is_on_f_.has_value()) {
+    traits.add_feature_flags(water_heater::WATER_HEATER_SUPPORTS_ON_OFF);
+  }
   return traits;
 }
 
@@ -62,6 +68,22 @@ void TemplateWaterHeater::loop() {
     }
   }
 
+  auto away = this->away_f_.call();
+  if (away.has_value()) {
+    if (*away != this->is_away()) {
+      this->set_state_flag_(water_heater::WATER_HEATER_STATE_AWAY, *away);
+      changed = true;
+    }
+  }
+
+  auto is_on = this->is_on_f_.call();
+  if (is_on.has_value()) {
+    if (*is_on != this->is_on()) {
+      this->set_state_flag_(water_heater::WATER_HEATER_STATE_ON, *is_on);
+      changed = true;
+    }
+  }
+
   if (changed) {
     this->publish_state();
   }
@@ -90,6 +112,17 @@ void TemplateWaterHeater::control(const water_heater::WaterHeaterCall &call) {
     }
   }
 
+  if (call.get_away().has_value()) {
+    if (this->optimistic_) {
+      this->set_state_flag_(water_heater::WATER_HEATER_STATE_AWAY, *call.get_away());
+    }
+  }
+  if (call.get_on().has_value()) {
+    if (this->optimistic_) {
+      this->set_state_flag_(water_heater::WATER_HEATER_STATE_ON, *call.get_on());
+    }
+  }
+
   this->set_trigger_.trigger();
 
   if (this->optimistic_) {

esphome/components/template/water_heater/template_water_heater.h

@@ -24,6 +24,8 @@ class TemplateWaterHeater : public Component, public water_heater::WaterHeater {
     this->target_temperature_f_.set(std::forward<F>(f));
   }
   template<typename F> void set_mode_lambda(F &&f) { this->mode_f_.set(std::forward<F>(f)); }
+  template<typename F> void set_away_lambda(F &&f) { this->away_f_.set(std::forward<F>(f)); }
+  template<typename F> void set_is_on_lambda(F &&f) { this->is_on_f_.set(std::forward<F>(f)); }
 
   void set_optimistic(bool optimistic) { this->optimistic_ = optimistic; }
   void set_restore_mode(TemplateWaterHeaterRestoreMode restore_mode) { this->restore_mode_ = restore_mode; }
@@ -49,6 +51,8 @@ class TemplateWaterHeater : public Component, public water_heater::WaterHeater {
   TemplateLambda<float> current_temperature_f_;
   TemplateLambda<float> target_temperature_f_;
   TemplateLambda<water_heater::WaterHeaterMode> mode_f_;
+  TemplateLambda<bool> away_f_;
+  TemplateLambda<bool> is_on_f_;
   TemplateWaterHeaterRestoreMode restore_mode_{WATER_HEATER_NO_RESTORE};
   water_heater::WaterHeaterModeMask supported_modes_;
   bool optimistic_{true};

esphome/components/voice_assistant/voice_assistant.cpp

@@ -430,12 +430,14 @@ void VoiceAssistant::client_subscription(api::APIConnection *client, bool subscr
   }
 
   if (this->api_client_ != nullptr) {
+    char current_peername[socket::SOCKADDR_STR_LEN];
+    char new_peername[socket::SOCKADDR_STR_LEN];
     ESP_LOGE(TAG,
              "Multiple API Clients attempting to connect to Voice Assistant\n"
              "Current client: %s (%s)\n"
              "New client: %s (%s)",
-             this->api_client_->get_name(), this->api_client_->get_peername(), client->get_name(),
-             client->get_peername());
+             this->api_client_->get_name(), this->api_client_->get_peername_to(current_peername), client->get_name(),
+             client->get_peername_to(new_peername));
     return;
   }
 

esphome/core/application.cpp

@@ -605,15 +605,6 @@ void Application::unregister_socket_fd(int fd) {
   }
 }
 
-bool Application::is_socket_ready(int fd) const {
-  // This function is thread-safe for reading the result of select()
-  // However, it should only be called after select() has been executed in the main loop
-  // The read_fds_ is only modified by select() in the main loop
-  if (fd < 0 || fd >= FD_SETSIZE)
-    return false;
-
-  return FD_ISSET(fd, &this->read_fds_);
-}
 #endif
 
 void Application::yield_with_select_(uint32_t delay_ms) {

esphome/core/application.h

@@ -101,6 +101,10 @@
 #include "esphome/components/update/update_entity.h"
 #endif
 
+namespace esphome::socket {
+class Socket;
+}  // namespace esphome::socket
+
 namespace esphome {
 
 // Teardown timeout constant (in milliseconds)
@@ -491,7 +495,8 @@ class Application {
   void unregister_socket_fd(int fd);
   /// Check if there's data available on a socket without blocking
   /// This function is thread-safe for reading, but should be called after select() has run
-  bool is_socket_ready(int fd) const;
+  /// The read_fds_ is only modified by select() in the main loop
+  bool is_socket_ready(int fd) const { return fd >= 0 && this->is_socket_ready_(fd); }
 
 #ifdef USE_WAKE_LOOP_THREADSAFE
   /// Wake the main event loop from a FreeRTOS task
@@ -503,6 +508,15 @@ class Application {
 
  protected:
   friend Component;
+  friend class socket::Socket;
+
+#ifdef USE_SOCKET_SELECT_SUPPORT
+  /// Fast path for Socket::ready() via friendship - skips negative fd check.
+  /// Safe because: fd was validated in register_socket_fd() at registration time,
+  /// and Socket::ready() only calls this when loop_monitored_ is true (registration succeeded).
+  /// FD_ISSET may include its own upper bounds check depending on platform.
+  bool is_socket_ready_(int fd) const { return FD_ISSET(fd, &this->read_fds_); }
+#endif
 
   void register_component_(Component *comp);
 

esphome/core/component_iterator.h

@@ -26,7 +26,6 @@ class ComponentIterator {
  public:
   void begin(bool include_internal = false);
   void advance();
-  bool completed() const { return this->state_ == IteratorState::NONE; }
   virtual bool on_begin();
 #ifdef USE_BINARY_SENSOR
   virtual bool on_binary_sensor(binary_sensor::BinarySensor *binary_sensor) = 0;

esphome/idf_component.yml

@@ -10,7 +10,7 @@ dependencies:
   espressif/mdns:
     version: 1.9.1
   espressif/esp_wifi_remote:
-    version: 1.2.4
+    version: 1.3.2
     rules:
       - if: "target in [esp32h2, esp32p4]"
   espressif/eppp_link:
@@ -18,7 +18,7 @@ dependencies:
     rules:
       - if: "target in [esp32h2, esp32p4]"
   espressif/esp_hosted:
-    version: 2.9.3
+    version: 2.11.5
     rules:
       - if: "target in [esp32h2, esp32p4]"
   zorxx/multipart-parser:

platformio.ini

@@ -136,6 +136,7 @@ extends = common:arduino
 platform = https://github.com/pioarduino/platform-espressif32/releases/download/55.03.36/platform-espressif32.zip
 platform_packages =
     pioarduino/framework-arduinoespressif32@https://github.com/espressif/arduino-esp32/releases/download/3.3.6/esp32-core-3.3.6.tar.xz
+    pioarduino/framework-espidf@https://github.com/pioarduino/esp-idf/releases/download/v5.5.2/esp-idf-v5.5.2.tar.xz
 
 framework = arduino, espidf  ; Arduino as an ESP-IDF component
 lib_deps =

requirements.txt

@@ -11,8 +11,8 @@ pyserial==3.5
 platformio==6.1.19
 esptool==5.1.0
 click==8.1.7
-esphome-dashboard==20260110.0
-aioesphomeapi==43.14.0
+esphome-dashboard==20260210.0
+aioesphomeapi==44.0.0
 zeroconf==0.148.0
 puremagic==1.30
 ruamel.yaml==0.19.1 # dashboard_import

tests/components/ld2450/common.yaml

@@ -1,5 +1,8 @@
 ld2450:
   - id: ld2450_radar
+    on_data:
+      then:
+        - logger.log: "LD2450 Radar Data Received"
 
 button:
   - platform: ld2450

tests/components/template/common-base.yaml

@@ -13,6 +13,8 @@ esphome:
         id: template_water_heater
         target_temperature: 50.0
         mode: ECO
+        away: false
+        is_on: true
 
     # Templated
     - water_heater.template.publish:
@@ -20,6 +22,8 @@ esphome:
         current_temperature: !lambda "return 45.0;"
         target_temperature: !lambda "return 55.0;"
         mode: !lambda "return water_heater::WATER_HEATER_MODE_GAS;"
+        away: !lambda "return true;"
+        is_on: !lambda "return false;"
 
     # Test C++ API: set_template() with stateless lambda (no captures)
     # NOTE: set_template() is not intended to be a public API, but we test it to ensure it doesn't break.
@@ -414,6 +418,8 @@ water_heater:
     current_temperature: !lambda "return 42.0f;"
     target_temperature: !lambda "return 60.0f;"
     mode: !lambda "return water_heater::WATER_HEATER_MODE_ECO;"
+    away: !lambda "return false;"
+    is_on: !lambda "return true;"
     supported_modes:
       - "OFF"
       - ECO

tests/integration/fixtures/water_heater_template.yaml

@@ -4,6 +4,14 @@ host:
 api:
 logger:
 
+globals:
+  - id: global_away
+    type: bool
+    initial_value: "false"
+  - id: global_is_on
+    type: bool
+    initial_value: "true"
+
 water_heater:
   - platform: template
     id: test_boiler
@@ -11,6 +19,8 @@ water_heater:
     optimistic: true
     current_temperature: !lambda "return 45.0f;"
     target_temperature: !lambda "return 60.0f;"
+    away: !lambda "return id(global_away);"
+    is_on: !lambda "return id(global_is_on);"
     # Note: No mode lambda - we want optimistic mode changes to stick
     # A mode lambda would override mode changes in loop()
     supported_modes:
@@ -22,3 +32,8 @@ water_heater:
       min_temperature: 30.0
       max_temperature: 85.0
       target_temperature_step: 0.5
+    set_action:
+      - lambda: |-
+          // Sync optimistic state back to globals so lambdas reflect the change
+          id(global_away) = id(test_boiler).is_away();
+          id(global_is_on) = id(test_boiler).is_on();

tests/integration/test_water_heater_template.py

@@ -5,7 +5,13 @@ from __future__ import annotations
 import asyncio
 
 import aioesphomeapi
-from aioesphomeapi import WaterHeaterInfo, WaterHeaterMode, WaterHeaterState
+from aioesphomeapi import (
+    WaterHeaterFeature,
+    WaterHeaterInfo,
+    WaterHeaterMode,
+    WaterHeaterState,
+    WaterHeaterStateFlag,
+)
 import pytest
 
 from .state_utils import InitialStateHelper
@@ -22,18 +28,25 @@ async def test_water_heater_template(
     loop = asyncio.get_running_loop()
     async with run_compiled(yaml_config), api_client_connected() as client:
         states: dict[int, aioesphomeapi.EntityState] = {}
-        gas_mode_future: asyncio.Future[WaterHeaterState] = loop.create_future()
-        eco_mode_future: asyncio.Future[WaterHeaterState] = loop.create_future()
+        state_future: asyncio.Future[WaterHeaterState] | None = None
 
         def on_state(state: aioesphomeapi.EntityState) -> None:
             states[state.key] = state
-            if isinstance(state, WaterHeaterState):
-                # Wait for GAS mode
-                if state.mode == WaterHeaterMode.GAS and not gas_mode_future.done():
-                    gas_mode_future.set_result(state)
-                # Wait for ECO mode (we start at OFF, so test transitioning to ECO)
-                elif state.mode == WaterHeaterMode.ECO and not eco_mode_future.done():
-                    eco_mode_future.set_result(state)
+            if (
+                isinstance(state, WaterHeaterState)
+                and state_future is not None
+                and not state_future.done()
+            ):
+                state_future.set_result(state)
+
+        async def wait_for_state(timeout: float = 5.0) -> WaterHeaterState:
+            """Wait for next water heater state change."""
+            nonlocal state_future
+            state_future = loop.create_future()
+            try:
+                return await asyncio.wait_for(state_future, timeout)
+            finally:
+                state_future = None
 
         # Get entities and set up state synchronization
         entities, services = await client.list_entities_services()
@@ -89,24 +102,52 @@ async def test_water_heater_template(
             f"Expected target temp 60.0, got {initial_state.target_temperature}"
         )
 
+        # Verify supported features: away mode and on/off (fixture has away + is_on lambdas)
+        assert (
+            test_water_heater.supported_features & WaterHeaterFeature.SUPPORTS_AWAY_MODE
+        ) != 0, "Expected SUPPORTS_AWAY_MODE in supported_features"
+        assert (
+            test_water_heater.supported_features & WaterHeaterFeature.SUPPORTS_ON_OFF
+        ) != 0, "Expected SUPPORTS_ON_OFF in supported_features"
+
+        # Verify initial state: on (is_on lambda returns true), not away (away lambda returns false)
+        assert (initial_state.state & WaterHeaterStateFlag.ON) != 0, (
+            "Expected initial state to include ON flag"
+        )
+        assert (initial_state.state & WaterHeaterStateFlag.AWAY) == 0, (
+            "Expected initial state to not include AWAY flag"
+        )
+
+        # Test turning on away mode
+        client.water_heater_command(test_water_heater.key, away=True)
+        away_on_state = await wait_for_state()
+        assert (away_on_state.state & WaterHeaterStateFlag.AWAY) != 0
+        # ON flag should still be set (is_on lambda returns true)
+        assert (away_on_state.state & WaterHeaterStateFlag.ON) != 0
+
+        # Test turning off away mode
+        client.water_heater_command(test_water_heater.key, away=False)
+        away_off_state = await wait_for_state()
+        assert (away_off_state.state & WaterHeaterStateFlag.AWAY) == 0
+        assert (away_off_state.state & WaterHeaterStateFlag.ON) != 0
+
+        # Test turning off (on=False)
+        client.water_heater_command(test_water_heater.key, on=False)
+        off_state = await wait_for_state()
+        assert (off_state.state & WaterHeaterStateFlag.ON) == 0
+        assert (off_state.state & WaterHeaterStateFlag.AWAY) == 0
+
+        # Test turning back on (on=True)
+        client.water_heater_command(test_water_heater.key, on=True)
+        on_state = await wait_for_state()
+        assert (on_state.state & WaterHeaterStateFlag.ON) != 0
+
         # Test changing to GAS mode
         client.water_heater_command(test_water_heater.key, mode=WaterHeaterMode.GAS)
-
-        try:
-            gas_state = await asyncio.wait_for(gas_mode_future, timeout=5.0)
-        except TimeoutError:
-            pytest.fail("GAS mode change not received within 5 seconds")
-
-        assert isinstance(gas_state, WaterHeaterState)
+        gas_state = await wait_for_state()
         assert gas_state.mode == WaterHeaterMode.GAS
 
         # Test changing to ECO mode (from GAS)
         client.water_heater_command(test_water_heater.key, mode=WaterHeaterMode.ECO)
-
-        try:
-            eco_state = await asyncio.wait_for(eco_mode_future, timeout=5.0)
-        except TimeoutError:
-            pytest.fail("ECO mode change not received within 5 seconds")
-
-        assert isinstance(eco_state, WaterHeaterState)
+        eco_state = await wait_for_state()
         assert eco_state.mode == WaterHeaterMode.ECO