Reword comment to avoid ci-custom scanf lint false positive

The regex matches `scanf (` in comments too since `\s*\(` matches the
space before the parenthesized size note.

Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>

Doxyfile

@@ -48,7 +48,7 @@ PROJECT_NAME           = ESPHome
 # could be handy for archiving the generated documentation or if some version
 # control system is used.
 
-PROJECT_NUMBER         = 2026.2.0b2
+PROJECT_NUMBER         = 2026.3.0-dev
 
 # Using the PROJECT_BRIEF tag one can provide an optional one line description
 # for a project that appears at the top of each page and should give viewer a

docker/Dockerfile

@@ -9,8 +9,7 @@ FROM ghcr.io/esphome/docker-base:${BUILD_OS}-ha-addon-${BUILD_BASE_VERSION} AS b
 ARG BUILD_TYPE
 FROM base-source-${BUILD_TYPE} AS base
 
-RUN git config --system --add safe.directory "*" \
-    && git config --system advice.detachedHead false
+RUN git config --system --add safe.directory "*"
 
 # Install build tools for Python packages that require compilation
 # (e.g., ruamel.yaml.clibz used by ESP-IDF's idf-component-manager)

esphome/components/api/api_frame_helper_noise.cpp

@@ -138,12 +138,10 @@ APIError APINoiseFrameHelper::handle_noise_error_(int err, const LogString *func
 
 /// Run through handshake messages (if in that phase)
 APIError APINoiseFrameHelper::loop() {
-  // Cache ready() outside the loop. On ESP8266 LWIP raw TCP, ready() returns false once
-  // the rx buffer is consumed. Re-checking each iteration would block handshake writes
-  // that must follow reads, deadlocking the handshake. state_action() will return
-  // WOULD_BLOCK when no more data is available to read.
-  bool socket_ready = this->socket_->ready();
-  while (state_ != State::DATA && socket_ready) {
+  // During handshake phase, process as many actions as possible until we can't progress
+  // socket_->ready() stays true until next main loop, but state_action() will return
+  // WOULD_BLOCK when no more data is available to read
+  while (state_ != State::DATA && this->socket_->ready()) {
     APIError err = state_action_();
     if (err == APIError::WOULD_BLOCK) {
       break;

esphome/components/api/api_server.cpp

@@ -117,7 +117,37 @@ void APIServer::setup() {
 void APIServer::loop() {
   // Accept new clients only if the socket exists and has incoming connections
   if (this->socket_ && this->socket_->ready()) {
-    this->accept_new_connections_();
+    while (true) {
+      struct sockaddr_storage source_addr;
+      socklen_t addr_len = sizeof(source_addr);
+
+      auto sock = this->socket_->accept_loop_monitored((struct sockaddr *) &source_addr, &addr_len);
+      if (!sock)
+        break;
+
+      char peername[socket::SOCKADDR_STR_LEN];
+      sock->getpeername_to(peername);
+
+      // Check if we're at the connection limit
+      if (this->clients_.size() >= this->max_connections_) {
+        ESP_LOGW(TAG, "Max connections (%d), rejecting %s", this->max_connections_, peername);
+        // Immediately close - socket destructor will handle cleanup
+        sock.reset();
+        continue;
+      }
+
+      ESP_LOGD(TAG, "Accept %s", peername);
+
+      auto *conn = new APIConnection(std::move(sock), this);
+      this->clients_.emplace_back(conn);
+      conn->start();
+
+      // First client connected - clear warning and update timestamp
+      if (this->clients_.size() == 1 && this->reboot_timeout_ != 0) {
+        this->status_clear_warning();
+        this->last_connected_ = App.get_loop_component_start_time();
+      }
+    }
   }
 
   if (this->clients_.empty()) {
@@ -148,88 +178,46 @@ void APIServer::loop() {
   while (client_index < this->clients_.size()) {
     auto &client = this->clients_[client_index];
 
-    // Common case: process active client
     if (!client->flags_.remove) {
+      // Common case: process active client
       client->loop();
-    }
-    // Handle disconnection promptly - close socket to free LWIP PCB
-    // resources and prevent retransmit crashes on ESP8266.
-    if (client->flags_.remove) {
-      // Rare case: handle disconnection (don't increment - swapped element needs processing)
-      this->remove_client_(client_index);
-    } else {
       client_index++;
-    }
-  }
-}
-
-void APIServer::remove_client_(size_t client_index) {
-  auto &client = this->clients_[client_index];
-
-#ifdef USE_API_USER_DEFINED_ACTION_RESPONSES
-  this->unregister_active_action_calls_for_connection(client.get());
-#endif
-  ESP_LOGV(TAG, "Remove connection %s", client->get_name());
-
-#ifdef USE_API_CLIENT_DISCONNECTED_TRIGGER
-  // Save client info before closing socket and removal for the trigger
-  char peername_buf[socket::SOCKADDR_STR_LEN];
-  std::string client_name(client->get_name());
-  std::string client_peername(client->get_peername_to(peername_buf));
-#endif
-
-  // Close socket now (was deferred from on_fatal_error to allow getpeername)
-  client->helper_->close();
-
-  // Swap with the last element and pop (avoids expensive vector shifts)
-  if (client_index < this->clients_.size() - 1) {
-    std::swap(this->clients_[client_index], this->clients_.back());
-  }
-  this->clients_.pop_back();
-
-  // Last client disconnected - set warning and start tracking for reboot timeout
-  if (this->clients_.empty() && this->reboot_timeout_ != 0) {
-    this->status_set_warning();
-    this->last_connected_ = App.get_loop_component_start_time();
-  }
-
-#ifdef USE_API_CLIENT_DISCONNECTED_TRIGGER
-  // Fire trigger after client is removed so api.connected reflects the true state
-  this->client_disconnected_trigger_.trigger(client_name, client_peername);
-#endif
-}
-
-void APIServer::accept_new_connections_() {
-  while (true) {
-    struct sockaddr_storage source_addr;
-    socklen_t addr_len = sizeof(source_addr);
-
-    auto sock = this->socket_->accept_loop_monitored((struct sockaddr *) &source_addr, &addr_len);
-    if (!sock)
-      break;
-
-    char peername[socket::SOCKADDR_STR_LEN];
-    sock->getpeername_to(peername);
-
-    // Check if we're at the connection limit
-    if (this->clients_.size() >= this->max_connections_) {
-      ESP_LOGW(TAG, "Max connections (%d), rejecting %s", this->max_connections_, peername);
-      // Immediately close - socket destructor will handle cleanup
-      sock.reset();
       continue;
     }
 
-    ESP_LOGD(TAG, "Accept %s", peername);
+    // Rare case: handle disconnection
+#ifdef USE_API_USER_DEFINED_ACTION_RESPONSES
+    this->unregister_active_action_calls_for_connection(client.get());
+#endif
+    ESP_LOGV(TAG, "Remove connection %s", client->get_name());
 
-    auto *conn = new APIConnection(std::move(sock), this);
-    this->clients_.emplace_back(conn);
-    conn->start();
+#ifdef USE_API_CLIENT_DISCONNECTED_TRIGGER
+    // Save client info before closing socket and removal for the trigger
+    char peername_buf[socket::SOCKADDR_STR_LEN];
+    std::string client_name(client->get_name());
+    std::string client_peername(client->get_peername_to(peername_buf));
+#endif
 
-    // First client connected - clear warning and update timestamp
-    if (this->clients_.size() == 1 && this->reboot_timeout_ != 0) {
-      this->status_clear_warning();
+    // Close socket now (was deferred from on_fatal_error to allow getpeername)
+    client->helper_->close();
+
+    // Swap with the last element and pop (avoids expensive vector shifts)
+    if (client_index < this->clients_.size() - 1) {
+      std::swap(this->clients_[client_index], this->clients_.back());
+    }
+    this->clients_.pop_back();
+
+    // Last client disconnected - set warning and start tracking for reboot timeout
+    if (this->clients_.empty() && this->reboot_timeout_ != 0) {
+      this->status_set_warning();
       this->last_connected_ = App.get_loop_component_start_time();
     }
+
+#ifdef USE_API_CLIENT_DISCONNECTED_TRIGGER
+    // Fire trigger after client is removed so api.connected reflects the true state
+    this->client_disconnected_trigger_.trigger(client_name, client_peername);
+#endif
+    // Don't increment client_index since we need to process the swapped element
   }
 }
 

esphome/components/api/api_server.h

@@ -234,11 +234,6 @@ class APIServer : public Component,
 #endif
 
  protected:
-  // Accept incoming socket connections. Only called when socket has pending connections.
-  void __attribute__((noinline)) accept_new_connections_();
-  // Remove a disconnected client by index. Swaps with last element and pops.
-  void __attribute__((noinline)) remove_client_(size_t client_index);
-
 #ifdef USE_API_NOISE
   bool update_noise_psk_(const SavedNoisePsk &new_psk, const LogString *save_log_msg, const LogString *fail_log_msg,
                          const psk_t &active_psk, bool make_active);

esphome/components/pulse_meter/pulse_meter_sensor.cpp

@@ -38,7 +38,8 @@ void PulseMeterSensor::setup() {
 }
 
 void PulseMeterSensor::loop() {
-  State state;
+  // Reset the count in get before we pass it back to the ISR as set
+  this->get_->count_ = 0;
 
   {
     // Lock the interrupt so the interrupt code doesn't interfere with itself
@@ -57,35 +58,31 @@ void PulseMeterSensor::loop() {
     }
     this->last_pin_val_ = current;
 
-    // Get the latest state from the ISR and reset the count in the ISR
-    state.last_detected_edge_us_ = this->state_.last_detected_edge_us_;
-    state.last_rising_edge_us_ = this->state_.last_rising_edge_us_;
-    state.count_ = this->state_.count_;
-    this->state_.count_ = 0;
+    // Swap out set and get to get the latest state from the ISR
+    std::swap(this->set_, this->get_);
   }
 
   const uint32_t now = micros();
 
   // If an edge was peeked, repay the debt
-  if (this->peeked_edge_ && state.count_ > 0) {
+  if (this->peeked_edge_ && this->get_->count_ > 0) {
     this->peeked_edge_ = false;
-    state.count_--;
+    this->get_->count_--;  // NOLINT(clang-diagnostic-deprecated-volatile)
   }
 
-  // If there is an unprocessed edge, and filter_us_ has passed since, count this edge early.
-  // Wait for the debt to be repaid before counting another unprocessed edge early.
-  if (!this->peeked_edge_ && state.last_rising_edge_us_ != state.last_detected_edge_us_ &&
-      now - state.last_rising_edge_us_ >= this->filter_us_) {
+  // If there is an unprocessed edge, and filter_us_ has passed since, count this edge early
+  if (this->get_->last_rising_edge_us_ != this->get_->last_detected_edge_us_ &&
+      now - this->get_->last_rising_edge_us_ >= this->filter_us_) {
     this->peeked_edge_ = true;
-    state.last_detected_edge_us_ = state.last_rising_edge_us_;
-    state.count_++;
+    this->get_->last_detected_edge_us_ = this->get_->last_rising_edge_us_;
+    this->get_->count_++;  // NOLINT(clang-diagnostic-deprecated-volatile)
   }
 
   // Check if we detected a pulse this loop
-  if (state.count_ > 0) {
+  if (this->get_->count_ > 0) {
     // Keep a running total of pulses if a total sensor is configured
     if (this->total_sensor_ != nullptr) {
-      this->total_pulses_ += state.count_;
+      this->total_pulses_ += this->get_->count_;
       const uint32_t total = this->total_pulses_;
       this->total_sensor_->publish_state(total);
     }
@@ -97,15 +94,15 @@ void PulseMeterSensor::loop() {
         this->meter_state_ = MeterState::RUNNING;
       } break;
       case MeterState::RUNNING: {
-        uint32_t delta_us = state.last_detected_edge_us_ - this->last_processed_edge_us_;
-        float pulse_width_us = delta_us / float(state.count_);
-        ESP_LOGV(TAG, "New pulse, delta: %" PRIu32 " µs, count: %" PRIu32 ", width: %.5f µs", delta_us, state.count_,
-                 pulse_width_us);
+        uint32_t delta_us = this->get_->last_detected_edge_us_ - this->last_processed_edge_us_;
+        float pulse_width_us = delta_us / float(this->get_->count_);
+        ESP_LOGV(TAG, "New pulse, delta: %" PRIu32 " µs, count: %" PRIu32 ", width: %.5f µs", delta_us,
+                 this->get_->count_, pulse_width_us);
         this->publish_state((60.0f * 1000000.0f) / pulse_width_us);
       } break;
     }
 
-    this->last_processed_edge_us_ = state.last_detected_edge_us_;
+    this->last_processed_edge_us_ = this->get_->last_detected_edge_us_;
   }
   // No detected edges this loop
   else {
@@ -144,14 +141,14 @@ void IRAM_ATTR PulseMeterSensor::edge_intr(PulseMeterSensor *sensor) {
   // This is an interrupt handler - we can't call any virtual method from this method
   // Get the current time before we do anything else so the measurements are consistent
   const uint32_t now = micros();
-  auto &edge_state = sensor->edge_state_;
-  auto &state = sensor->state_;
+  auto &state = sensor->edge_state_;
+  auto &set = *sensor->set_;
 
-  if ((now - edge_state.last_sent_edge_us_) >= sensor->filter_us_) {
-    edge_state.last_sent_edge_us_ = now;
-    state.last_detected_edge_us_ = now;
-    state.last_rising_edge_us_ = now;
-    state.count_++;  // NOLINT(clang-diagnostic-deprecated-volatile)
+  if ((now - state.last_sent_edge_us_) >= sensor->filter_us_) {
+    state.last_sent_edge_us_ = now;
+    set.last_detected_edge_us_ = now;
+    set.last_rising_edge_us_ = now;
+    set.count_++;  // NOLINT(clang-diagnostic-deprecated-volatile)
   }
 
   // This ISR is bound to rising edges, so the pin is high
@@ -163,26 +160,26 @@ void IRAM_ATTR PulseMeterSensor::pulse_intr(PulseMeterSensor *sensor) {
   // Get the current time before we do anything else so the measurements are consistent
   const uint32_t now = micros();
   const bool pin_val = sensor->isr_pin_.digital_read();
-  auto &pulse_state = sensor->pulse_state_;
-  auto &state = sensor->state_;
+  auto &state = sensor->pulse_state_;
+  auto &set = *sensor->set_;
 
   // Filter length has passed since the last interrupt
-  const bool length = now - pulse_state.last_intr_ >= sensor->filter_us_;
+  const bool length = now - state.last_intr_ >= sensor->filter_us_;
 
-  if (length && pulse_state.latched_ && !sensor->last_pin_val_) {  // Long enough low edge
-    pulse_state.latched_ = false;
-  } else if (length && !pulse_state.latched_ && sensor->last_pin_val_) {  // Long enough high edge
-    pulse_state.latched_ = true;
-    state.last_detected_edge_us_ = pulse_state.last_intr_;
-    state.count_++;  // NOLINT(clang-diagnostic-deprecated-volatile)
+  if (length && state.latched_ && !sensor->last_pin_val_) {  // Long enough low edge
+    state.latched_ = false;
+  } else if (length && !state.latched_ && sensor->last_pin_val_) {  // Long enough high edge
+    state.latched_ = true;
+    set.last_detected_edge_us_ = state.last_intr_;
+    set.count_++;  // NOLINT(clang-diagnostic-deprecated-volatile)
   }
 
   // Due to order of operations this includes
   //    length && latched && rising   (just reset from a long low edge)
   //    !latched && (rising || high)  (noise on the line resetting the potential rising edge)
-  state.last_rising_edge_us_ = !pulse_state.latched_ && pin_val ? now : state.last_detected_edge_us_;
+  set.last_rising_edge_us_ = !state.latched_ && pin_val ? now : set.last_detected_edge_us_;
 
-  pulse_state.last_intr_ = now;
+  state.last_intr_ = now;
   sensor->last_pin_val_ = pin_val;
 }
 

esphome/components/pulse_meter/pulse_meter_sensor.h

@@ -46,16 +46,17 @@ class PulseMeterSensor : public sensor::Sensor, public Component {
   uint32_t total_pulses_ = 0;
   uint32_t last_processed_edge_us_ = 0;
 
-  // This struct and variable are used to pass data between the ISR and loop.
-  // The data from state_ is read and then count_ in state_ is reset in each loop.
-  // This must be done while guarded by an InterruptLock. Use this variable to send data
-  // from the ISR to the loop not the other way around (except for resetting count_).
+  // This struct (and the two pointers) are used to pass data between the ISR and loop.
+  // These two pointers are exchanged each loop.
+  // Use these to send data from the ISR to the loop not the other way around (except for resetting the values).
   struct State {
     uint32_t last_detected_edge_us_ = 0;
     uint32_t last_rising_edge_us_ = 0;
     uint32_t count_ = 0;
   };
-  volatile State state_{};
+  State state_[2];
+  volatile State *set_ = state_;
+  volatile State *get_ = state_ + 1;
 
   // Only use the following variables in the ISR or while guarded by an InterruptLock
   ISRInternalGPIOPin isr_pin_;

esphome/components/time/posix_tz.cpp

@@ -0,0 +1,481 @@
+#include "esphome/core/defines.h"
+
+#ifdef USE_TIME_TIMEZONE
+
+#include "posix_tz.h"
+#include <cctype>
+
+namespace esphome::time {
+
+// Global timezone - set once at startup, rarely changes
+// NOLINTNEXTLINE(cppcoreguidelines-avoid-non-const-global-variables) - intentional mutable state
+static ParsedTimezone global_tz_{};
+
+void set_global_tz(const ParsedTimezone &tz) { global_tz_ = tz; }
+
+const ParsedTimezone &get_global_tz() { return global_tz_; }
+
+namespace internal {
+
+// Helper to parse an unsigned integer from string, updating pointer
+static uint32_t parse_uint(const char *&p) {
+  uint32_t value = 0;
+  while (std::isdigit(static_cast<unsigned char>(*p))) {
+    value = value * 10 + (*p - '0');
+    p++;
+  }
+  return value;
+}
+
+bool is_leap_year(int year) { return (year % 4 == 0 && year % 100 != 0) || (year % 400 == 0); }
+
+// Get days in year (avoids duplicate is_leap_year calls)
+static inline int days_in_year(int year) { return is_leap_year(year) ? 366 : 365; }
+
+// Convert days since epoch to year, updating days to remainder
+static int __attribute__((noinline)) days_to_year(int64_t &days) {
+  int year = 1970;
+  int diy;
+  while (days >= (diy = days_in_year(year))) {
+    days -= diy;
+    year++;
+  }
+  while (days < 0) {
+    year--;
+    days += days_in_year(year);
+  }
+  return year;
+}
+
+// Extract just the year from a UTC epoch
+static int epoch_to_year(time_t epoch) {
+  int64_t days = epoch / 86400;
+  if (epoch < 0 && epoch % 86400 != 0)
+    days--;
+  return days_to_year(days);
+}
+
+int days_in_month(int year, int month) {
+  switch (month) {
+    case 2:
+      return is_leap_year(year) ? 29 : 28;
+    case 4:
+    case 6:
+    case 9:
+    case 11:
+      return 30;
+    default:
+      return 31;
+  }
+}
+
+// Zeller-like algorithm for day of week (0 = Sunday)
+int __attribute__((noinline)) day_of_week(int year, int month, int day) {
+  // Adjust for January/February
+  if (month < 3) {
+    month += 12;
+    year--;
+  }
+  int k = year % 100;
+  int j = year / 100;
+  int h = (day + (13 * (month + 1)) / 5 + k + k / 4 + j / 4 - 2 * j) % 7;
+  // Convert from Zeller (0=Sat) to standard (0=Sun)
+  return ((h + 6) % 7);
+}
+
+void __attribute__((noinline)) epoch_to_tm_utc(time_t epoch, struct tm *out_tm) {
+  // Days since epoch
+  int64_t days = epoch / 86400;
+  int32_t remaining_secs = epoch % 86400;
+  if (remaining_secs < 0) {
+    days--;
+    remaining_secs += 86400;
+  }
+
+  out_tm->tm_sec = remaining_secs % 60;
+  remaining_secs /= 60;
+  out_tm->tm_min = remaining_secs % 60;
+  out_tm->tm_hour = remaining_secs / 60;
+
+  // Day of week (Jan 1, 1970 was Thursday = 4)
+  out_tm->tm_wday = static_cast<int>((days + 4) % 7);
+  if (out_tm->tm_wday < 0)
+    out_tm->tm_wday += 7;
+
+  // Calculate year (updates days to day-of-year)
+  int year = days_to_year(days);
+  out_tm->tm_year = year - 1900;
+  out_tm->tm_yday = static_cast<int>(days);
+
+  // Calculate month and day
+  int month = 1;
+  int dim;
+  while (days >= (dim = days_in_month(year, month))) {
+    days -= dim;
+    month++;
+  }
+
+  out_tm->tm_mon = month - 1;
+  out_tm->tm_mday = static_cast<int>(days) + 1;
+  out_tm->tm_isdst = 0;
+}
+
+bool skip_tz_name(const char *&p) {
+  if (*p == '<') {
+    // Angle-bracket quoted name: <+07>, <-03>, <AEST>
+    p++;  // skip '<'
+    while (*p && *p != '>') {
+      p++;
+    }
+    if (*p == '>') {
+      p++;  // skip '>'
+      return true;
+    }
+    return false;  // Unterminated
+  }
+
+  // Standard name: 3+ letters
+  const char *start = p;
+  while (*p && std::isalpha(static_cast<unsigned char>(*p))) {
+    p++;
+  }
+  return (p - start) >= 3;
+}
+
+int32_t __attribute__((noinline)) parse_offset(const char *&p) {
+  int sign = 1;
+  if (*p == '-') {
+    sign = -1;
+    p++;
+  } else if (*p == '+') {
+    p++;
+  }
+
+  int hours = parse_uint(p);
+  int minutes = 0;
+  int seconds = 0;
+
+  if (*p == ':') {
+    p++;
+    minutes = parse_uint(p);
+    if (*p == ':') {
+      p++;
+      seconds = parse_uint(p);
+    }
+  }
+
+  return sign * (hours * 3600 + minutes * 60 + seconds);
+}
+
+// Helper to parse the optional /time suffix (reuses parse_offset logic)
+static void parse_transition_time(const char *&p, DSTRule &rule) {
+  rule.time_seconds = 2 * 3600;  // Default 02:00
+  if (*p == '/') {
+    p++;
+    rule.time_seconds = parse_offset(p);
+  }
+}
+
+void __attribute__((noinline)) julian_to_month_day(int julian_day, int &out_month, int &out_day) {
+  // J format: day 1-365, Feb 29 is NOT counted even in leap years
+  // So day 60 is always March 1
+  // Iterate forward through months (no array needed)
+  int remaining = julian_day;
+  out_month = 1;
+  while (out_month <= 12) {
+    // Days in month for non-leap year (J format ignores leap years)
+    int dim = days_in_month(2001, out_month);  // 2001 is non-leap year
+    if (remaining <= dim) {
+      out_day = remaining;
+      return;
+    }
+    remaining -= dim;
+    out_month++;
+  }
+  out_day = remaining;
+}
+
+void __attribute__((noinline)) day_of_year_to_month_day(int day_of_year, int year, int &out_month, int &out_day) {
+  // Plain format: day 0-365, Feb 29 IS counted in leap years
+  // Day 0 = Jan 1
+  int remaining = day_of_year;
+  out_month = 1;
+
+  while (out_month <= 12) {
+    int days_this_month = days_in_month(year, out_month);
+    if (remaining < days_this_month) {
+      out_day = remaining + 1;
+      return;
+    }
+    remaining -= days_this_month;
+    out_month++;
+  }
+
+  // Shouldn't reach here with valid input
+  out_month = 12;
+  out_day = 31;
+}
+
+bool parse_dst_rule(const char *&p, DSTRule &rule) {
+  rule = {};  // Zero initialize
+
+  if (*p == 'M' || *p == 'm') {
+    // M format: Mm.w.d (month.week.day)
+    rule.type = DSTRuleType::MONTH_WEEK_DAY;
+    p++;
+
+    rule.month = parse_uint(p);
+    if (rule.month < 1 || rule.month > 12)
+      return false;
+
+    if (*p++ != '.')
+      return false;
+
+    rule.week = parse_uint(p);
+    if (rule.week < 1 || rule.week > 5)
+      return false;
+
+    if (*p++ != '.')
+      return false;
+
+    rule.day_of_week = parse_uint(p);
+    if (rule.day_of_week > 6)
+      return false;
+
+  } else if (*p == 'J' || *p == 'j') {
+    // J format: Jn (Julian day 1-365, not counting Feb 29)
+    rule.type = DSTRuleType::JULIAN_NO_LEAP;
+    p++;
+
+    rule.day = parse_uint(p);
+    if (rule.day < 1 || rule.day > 365)
+      return false;
+
+  } else if (std::isdigit(static_cast<unsigned char>(*p))) {
+    // Plain number format: n (day 0-365, counting Feb 29)
+    rule.type = DSTRuleType::DAY_OF_YEAR;
+
+    rule.day = parse_uint(p);
+    if (rule.day > 365)
+      return false;
+
+  } else {
+    return false;
+  }
+
+  // Parse optional /time suffix
+  parse_transition_time(p, rule);
+
+  return true;
+}
+
+// Calculate days from Jan 1 of given year to given month/day
+static int __attribute__((noinline)) days_from_year_start(int year, int month, int day) {
+  int days = day - 1;
+  for (int m = 1; m < month; m++) {
+    days += days_in_month(year, m);
+  }
+  return days;
+}
+
+// Calculate days from epoch to Jan 1 of given year (for DST transition calculations)
+// Only supports years >= 1970. Timezone is either compiled in from YAML or set by
+// Home Assistant, so pre-1970 dates are not a concern.
+static int64_t __attribute__((noinline)) days_to_year_start(int year) {
+  int64_t days = 0;
+  for (int y = 1970; y < year; y++) {
+    days += days_in_year(y);
+  }
+  return days;
+}
+
+time_t __attribute__((noinline)) calculate_dst_transition(int year, const DSTRule &rule, int32_t base_offset_seconds) {
+  int month, day;
+
+  switch (rule.type) {
+    case DSTRuleType::MONTH_WEEK_DAY: {
+      // Find the nth occurrence of day_of_week in the given month
+      int first_dow = day_of_week(year, rule.month, 1);
+
+      // Days until first occurrence of target day
+      int days_until_first = (rule.day_of_week - first_dow + 7) % 7;
+      int first_occurrence = 1 + days_until_first;
+
+      if (rule.week == 5) {
+        // "Last" occurrence - find the last one in the month
+        int dim = days_in_month(year, rule.month);
+        day = first_occurrence;
+        while (day + 7 <= dim) {
+          day += 7;
+        }
+      } else {
+        // nth occurrence
+        day = first_occurrence + (rule.week - 1) * 7;
+      }
+      month = rule.month;
+      break;
+    }
+
+    case DSTRuleType::JULIAN_NO_LEAP:
+      // J format: day 1-365, Feb 29 not counted
+      julian_to_month_day(rule.day, month, day);
+      break;
+
+    case DSTRuleType::DAY_OF_YEAR:
+      // Plain format: day 0-365, Feb 29 counted
+      day_of_year_to_month_day(rule.day, year, month, day);
+      break;
+
+    case DSTRuleType::NONE:
+      // Should never be called with NONE, but handle it gracefully
+      month = 1;
+      day = 1;
+      break;
+  }
+
+  // Calculate days from epoch to this date
+  int64_t days = days_to_year_start(year) + days_from_year_start(year, month, day);
+
+  // Convert to epoch and add transition time and base offset
+  return days * 86400 + rule.time_seconds + base_offset_seconds;
+}
+
+}  // namespace internal
+
+bool __attribute__((noinline)) is_in_dst(time_t utc_epoch, const ParsedTimezone &tz) {
+  if (!tz.has_dst()) {
+    return false;
+  }
+
+  int year = internal::epoch_to_year(utc_epoch);
+
+  // Calculate DST start and end for this year
+  // DST start transition happens in standard time
+  time_t dst_start = internal::calculate_dst_transition(year, tz.dst_start, tz.std_offset_seconds);
+  // DST end transition happens in daylight time
+  time_t dst_end = internal::calculate_dst_transition(year, tz.dst_end, tz.dst_offset_seconds);
+
+  if (dst_start < dst_end) {
+    // Northern hemisphere: DST is between start and end
+    return (utc_epoch >= dst_start && utc_epoch < dst_end);
+  } else {
+    // Southern hemisphere: DST is outside the range (wraps around year)
+    return (utc_epoch >= dst_start || utc_epoch < dst_end);
+  }
+}
+
+bool parse_posix_tz(const char *tz_string, ParsedTimezone &result) {
+  if (!tz_string || !*tz_string) {
+    return false;
+  }
+
+  const char *p = tz_string;
+
+  // Initialize result (dst_start/dst_end default to type=NONE, so has_dst() returns false)
+  result.std_offset_seconds = 0;
+  result.dst_offset_seconds = 0;
+  result.dst_start = {};
+  result.dst_end = {};
+
+  // Skip standard timezone name
+  if (!internal::skip_tz_name(p)) {
+    return false;
+  }
+
+  // Parse standard offset (required)
+  if (!*p || (!std::isdigit(static_cast<unsigned char>(*p)) && *p != '+' && *p != '-')) {
+    return false;
+  }
+  result.std_offset_seconds = internal::parse_offset(p);
+
+  // Check for DST name
+  if (!*p) {
+    return true;  // No DST
+  }
+
+  // If next char is comma, there's no DST name but there are rules (invalid)
+  if (*p == ',') {
+    return false;
+  }
+
+  // Check if there's something that looks like a DST name start
+  // (letter or angle bracket). If not, treat as trailing garbage and return success.
+  if (!std::isalpha(static_cast<unsigned char>(*p)) && *p != '<') {
+    return true;  // No DST, trailing characters ignored
+  }
+
+  if (!internal::skip_tz_name(p)) {
+    return false;  // Invalid DST name (started but malformed)
+  }
+
+  // Optional DST offset (default is std - 1 hour)
+  if (*p && *p != ',' && (std::isdigit(static_cast<unsigned char>(*p)) || *p == '+' || *p == '-')) {
+    result.dst_offset_seconds = internal::parse_offset(p);
+  } else {
+    result.dst_offset_seconds = result.std_offset_seconds - 3600;
+  }
+
+  // Parse DST rules (required when DST name is present)
+  if (*p != ',') {
+    // DST name without rules - treat as no DST since we can't determine transitions
+    return true;
+  }
+
+  p++;
+  if (!internal::parse_dst_rule(p, result.dst_start)) {
+    return false;
+  }
+
+  // Second rule is required per POSIX
+  if (*p != ',') {
+    return false;
+  }
+  p++;
+  // has_dst() now returns true since dst_start.type was set by parse_dst_rule
+  return internal::parse_dst_rule(p, result.dst_end);
+}
+
+bool epoch_to_local_tm(time_t utc_epoch, const ParsedTimezone &tz, struct tm *out_tm) {
+  if (!out_tm) {
+    return false;
+  }
+
+  // Determine DST status once (avoids duplicate is_in_dst calculation)
+  bool in_dst = is_in_dst(utc_epoch, tz);
+  int32_t offset = in_dst ? tz.dst_offset_seconds : tz.std_offset_seconds;
+
+  // Apply offset (POSIX offset is positive west, so subtract to get local)
+  time_t local_epoch = utc_epoch - offset;
+
+  internal::epoch_to_tm_utc(local_epoch, out_tm);
+  out_tm->tm_isdst = in_dst ? 1 : 0;
+
+  return true;
+}
+
+}  // namespace esphome::time
+
+#ifndef USE_HOST
+// Override libc's localtime functions to use our timezone on embedded platforms.
+// This allows user lambdas calling ::localtime() to get correct local time
+// without needing the TZ environment variable (which pulls in scanf bloat).
+// On host, we use the normal TZ mechanism since there's no memory constraint.
+
+// Thread-safe version
+extern "C" struct tm *localtime_r(const time_t *timer, struct tm *result) {
+  if (timer == nullptr || result == nullptr) {
+    return nullptr;
+  }
+  esphome::time::epoch_to_local_tm(*timer, esphome::time::get_global_tz(), result);
+  return result;
+}
+
+// Non-thread-safe version (uses static buffer, standard libc behavior)
+extern "C" struct tm *localtime(const time_t *timer) {
+  // NOLINTNEXTLINE(cppcoreguidelines-avoid-non-const-global-variables)
+  static struct tm localtime_buf;
+  return localtime_r(timer, &localtime_buf);
+}
+#endif  // !USE_HOST
+
+#endif  // USE_TIME_TIMEZONE

esphome/components/time/posix_tz.h

@@ -0,0 +1,132 @@
+#pragma once
+
+#ifdef USE_TIME_TIMEZONE
+
+#include <cstdint>
+#include <ctime>
+
+namespace esphome::time {
+
+/// Type of DST transition rule
+enum class DSTRuleType : uint8_t {
+  NONE = 0,        ///< No DST rule (used to indicate no DST)
+  MONTH_WEEK_DAY,  ///< M format: Mm.w.d (e.g., M3.2.0 = 2nd Sunday of March)
+  JULIAN_NO_LEAP,  ///< J format: Jn (day 1-365, Feb 29 not counted)
+  DAY_OF_YEAR,     ///< Plain number: n (day 0-365, Feb 29 counted in leap years)
+};
+
+/// Rule for DST transition (packed for 32-bit: 12 bytes)
+struct DSTRule {
+  int32_t time_seconds;  ///< Seconds after midnight (default 7200 = 2:00 AM)
+  uint16_t day;          ///< Day of year (for JULIAN_NO_LEAP and DAY_OF_YEAR)
+  DSTRuleType type;      ///< Type of rule
+  uint8_t month;         ///< Month 1-12 (for MONTH_WEEK_DAY)
+  uint8_t week;          ///< Week 1-5, 5 = last (for MONTH_WEEK_DAY)
+  uint8_t day_of_week;   ///< Day 0-6, 0 = Sunday (for MONTH_WEEK_DAY)
+};
+
+/// Parsed POSIX timezone information (packed for 32-bit: 32 bytes)
+struct ParsedTimezone {
+  int32_t std_offset_seconds;  ///< Standard time offset from UTC in seconds (positive = west)
+  int32_t dst_offset_seconds;  ///< DST offset from UTC in seconds
+  DSTRule dst_start;           ///< When DST starts
+  DSTRule dst_end;             ///< When DST ends
+
+  /// Check if this timezone has DST rules
+  bool has_dst() const { return this->dst_start.type != DSTRuleType::NONE; }
+};
+
+/// Parse a POSIX TZ string into a ParsedTimezone struct.
+/// Supports formats like:
+///   - "EST5" (simple offset, no DST)
+///   - "EST5EDT,M3.2.0,M11.1.0" (with DST, M-format rules)
+///   - "CST6CDT,M3.2.0/2,M11.1.0/2" (with transition times)
+///   - "<+07>-7" (angle-bracket notation for special names)
+///   - "IST-5:30" (half-hour offsets)
+///   - "EST5EDT,J60,J300" (J-format: Julian day without leap day)
+///   - "EST5EDT,60,300" (plain day number: day of year with leap day)
+/// @param tz_string The POSIX TZ string to parse
+/// @param result Output: the parsed timezone data
+/// @return true if parsing succeeded, false on error
+bool parse_posix_tz(const char *tz_string, ParsedTimezone &result);
+
+/// Convert a UTC epoch to local time using the parsed timezone.
+/// This replaces libc's localtime() to avoid scanf dependency.
+/// @param utc_epoch Unix timestamp in UTC
+/// @param tz The parsed timezone
+/// @param[out] out_tm Output tm struct with local time
+/// @return true on success
+bool epoch_to_local_tm(time_t utc_epoch, const ParsedTimezone &tz, struct tm *out_tm);
+
+/// Set the global timezone used by epoch_to_local_tm() when called without a timezone.
+/// This is called by RealTimeClock::apply_timezone_() to enable ESPTime::from_epoch_local()
+/// to work without libc's localtime().
+void set_global_tz(const ParsedTimezone &tz);
+
+/// Get the global timezone.
+const ParsedTimezone &get_global_tz();
+
+/// Check if a given UTC epoch falls within DST for the parsed timezone.
+/// @param utc_epoch Unix timestamp in UTC
+/// @param tz The parsed timezone
+/// @return true if DST is in effect at the given time
+bool is_in_dst(time_t utc_epoch, const ParsedTimezone &tz);
+
+// Internal helper functions exposed for testing
+
+namespace internal {
+
+/// Skip a timezone name (letters or <...> quoted format)
+/// @param p Pointer to current position, updated on return
+/// @return true if a valid name was found
+bool skip_tz_name(const char *&p);
+
+/// Parse an offset in format [-]hh[:mm[:ss]]
+/// @param p Pointer to current position, updated on return
+/// @return Offset in seconds
+int32_t parse_offset(const char *&p);
+
+/// Parse a DST rule in format Mm.w.d[/time], Jn[/time], or n[/time]
+/// @param p Pointer to current position, updated on return
+/// @param rule Output: the parsed rule
+/// @return true if parsing succeeded
+bool parse_dst_rule(const char *&p, DSTRule &rule);
+
+/// Convert Julian day (J format, 1-365 not counting Feb 29) to month/day
+/// @param julian_day Day number 1-365
+/// @param[out] month Output: month 1-12
+/// @param[out] day Output: day of month
+void julian_to_month_day(int julian_day, int &month, int &day);
+
+/// Convert day of year (plain format, 0-365 counting Feb 29) to month/day
+/// @param day_of_year Day number 0-365
+/// @param year The year (for leap year calculation)
+/// @param[out] month Output: month 1-12
+/// @param[out] day Output: day of month
+void day_of_year_to_month_day(int day_of_year, int year, int &month, int &day);
+
+/// Calculate day of week for any date (0 = Sunday)
+/// Uses a simplified algorithm that works for years 1970-2099
+int day_of_week(int year, int month, int day);
+
+/// Get the number of days in a month
+int days_in_month(int year, int month);
+
+/// Check if a year is a leap year
+bool is_leap_year(int year);
+
+/// Convert epoch to year/month/day/hour/min/sec (UTC)
+void epoch_to_tm_utc(time_t epoch, struct tm *out_tm);
+
+/// Calculate the epoch timestamp for a DST transition in a given year.
+/// @param year The year (e.g., 2026)
+/// @param rule The DST rule (month, week, day_of_week, time)
+/// @param base_offset_seconds The timezone offset to apply (std or dst depending on context)
+/// @return Unix epoch timestamp of the transition
+time_t calculate_dst_transition(int year, const DSTRule &rule, int32_t base_offset_seconds);
+
+}  // namespace internal
+
+}  // namespace esphome::time
+
+#endif  // USE_TIME_TIMEZONE

esphome/components/time/real_time_clock.cpp

@@ -14,8 +14,8 @@
 #include <sys/time.h>
 #endif
 #include <cerrno>
-
 #include <cinttypes>
+#include <cstdlib>
 
 namespace esphome::time {
 
@@ -23,9 +23,33 @@ static const char *const TAG = "time";
 
 RealTimeClock::RealTimeClock() = default;
 
+ESPTime __attribute__((noinline)) RealTimeClock::now() {
+#ifdef USE_TIME_TIMEZONE
+  time_t epoch = this->timestamp_now();
+  struct tm local_tm;
+  if (epoch_to_local_tm(epoch, get_global_tz(), &local_tm)) {
+    return ESPTime::from_c_tm(&local_tm, epoch);
+  }
+  // Fallback to UTC if parsing failed
+  return ESPTime::from_epoch_utc(epoch);
+#else
+  return ESPTime::from_epoch_local(this->timestamp_now());
+#endif
+}
+
 void RealTimeClock::dump_config() {
 #ifdef USE_TIME_TIMEZONE
-  ESP_LOGCONFIG(TAG, "Timezone: '%s'", this->timezone_.c_str());
+  const auto &tz = get_global_tz();
+  // POSIX offset is positive west, negate for conventional UTC+X display
+  int std_h = -tz.std_offset_seconds / 3600;
+  int std_m = (std::abs(tz.std_offset_seconds) % 3600) / 60;
+  if (tz.has_dst()) {
+    int dst_h = -tz.dst_offset_seconds / 3600;
+    int dst_m = (std::abs(tz.dst_offset_seconds) % 3600) / 60;
+    ESP_LOGCONFIG(TAG, "Timezone: UTC%+d:%02d (DST UTC%+d:%02d)", std_h, std_m, dst_h, dst_m);
+  } else {
+    ESP_LOGCONFIG(TAG, "Timezone: UTC%+d:%02d", std_h, std_m);
+  }
 #endif
   auto time = this->now();
   ESP_LOGCONFIG(TAG, "Current time: %04d-%02d-%02d %02d:%02d:%02d", time.year, time.month, time.day_of_month, time.hour,
@@ -72,11 +96,6 @@ void RealTimeClock::synchronize_epoch_(uint32_t epoch) {
     ret = settimeofday(&timev, nullptr);
   }
 
-#ifdef USE_TIME_TIMEZONE
-  // Move timezone back to local timezone.
-  this->apply_timezone_();
-#endif
-
   if (ret != 0) {
     ESP_LOGW(TAG, "setimeofday() failed with code %d", ret);
   }
@@ -89,9 +108,29 @@ void RealTimeClock::synchronize_epoch_(uint32_t epoch) {
 }
 
 #ifdef USE_TIME_TIMEZONE
-void RealTimeClock::apply_timezone_() {
-  setenv("TZ", this->timezone_.c_str(), 1);
+void RealTimeClock::apply_timezone_(const char *tz) {
+  ParsedTimezone parsed{};
+
+  // Handle null or empty input - use UTC
+  if (tz == nullptr || *tz == '\0') {
+    set_global_tz(parsed);
+    return;
+  }
+
+#ifdef USE_HOST
+  // On host platform, also set TZ environment variable for libc compatibility
+  setenv("TZ", tz, 1);
   tzset();
+#endif
+
+  // Parse the POSIX TZ string using our custom parser
+  if (!parse_posix_tz(tz, parsed)) {
+    ESP_LOGW(TAG, "Failed to parse timezone: %s", tz);
+    // parsed stays as default (UTC) on failure
+  }
+
+  // Set global timezone for all time conversions
+  set_global_tz(parsed);
 }
 #endif
 

esphome/components/time/real_time_clock.h

@@ -6,6 +6,9 @@
 #include "esphome/core/component.h"
 #include "esphome/core/helpers.h"
 #include "esphome/core/time.h"
+#ifdef USE_TIME_TIMEZONE
+#include "posix_tz.h"
+#endif
 
 namespace esphome::time {
 
@@ -20,26 +23,31 @@ class RealTimeClock : public PollingComponent {
   explicit RealTimeClock();
 
 #ifdef USE_TIME_TIMEZONE
-  /// Set the time zone.
-  void set_timezone(const std::string &tz) {
-    this->timezone_ = tz;
-    this->apply_timezone_();
-  }
+  /// Set the time zone from a POSIX TZ string.
+  void set_timezone(const char *tz) { this->apply_timezone_(tz); }
 
-  /// Set the time zone from raw buffer, only if it differs from the current one.
+  /// Set the time zone from a character buffer with known length.
+  /// The buffer does not need to be null-terminated.
   void set_timezone(const char *tz, size_t len) {
-    if (this->timezone_.length() != len || memcmp(this->timezone_.c_str(), tz, len) != 0) {
-      this->timezone_.assign(tz, len);
-      this->apply_timezone_();
+    if (tz == nullptr) {
+      this->apply_timezone_(nullptr);
+      return;
     }
+    // Stack buffer - TZ strings from tzdata are typically short (< 50 chars)
+    char buf[128];
+    if (len >= sizeof(buf))
+      len = sizeof(buf) - 1;
+    memcpy(buf, tz, len);
+    buf[len] = '\0';
+    this->apply_timezone_(buf);
   }
 
-  /// Get the time zone currently in use.
-  std::string get_timezone() { return this->timezone_; }
+  /// Set the time zone from a std::string.
+  void set_timezone(const std::string &tz) { this->apply_timezone_(tz.c_str()); }
 #endif
 
   /// Get the time in the currently defined timezone.
-  ESPTime now() { return ESPTime::from_epoch_local(this->timestamp_now()); }
+  ESPTime now();
 
   /// Get the time without any time zone or DST corrections.
   ESPTime utcnow() { return ESPTime::from_epoch_utc(this->timestamp_now()); }
@@ -58,8 +66,7 @@ class RealTimeClock : public PollingComponent {
   void synchronize_epoch_(uint32_t epoch);
 
 #ifdef USE_TIME_TIMEZONE
-  std::string timezone_{};
-  void apply_timezone_();
+  void apply_timezone_(const char *tz);
 #endif
 
   LazyCallbackManager<void()> time_sync_callback_;

esphome/components/uart/uart_component_esp_idf.cpp

@@ -90,6 +90,7 @@ void IDFUARTComponent::setup() {
     return;
   }
   this->uart_num_ = static_cast<uart_port_t>(next_uart_num++);
+  this->lock_ = xSemaphoreCreateMutex();
 
 #if (SOC_UART_LP_NUM >= 1)
   size_t fifo_len = ((this->uart_num_ < SOC_UART_HP_NUM) ? SOC_UART_FIFO_LEN : SOC_LP_UART_FIFO_LEN);
@@ -101,7 +102,11 @@ void IDFUARTComponent::setup() {
     this->rx_buffer_size_ = fifo_len * 2;
   }
 
+  xSemaphoreTake(this->lock_, portMAX_DELAY);
+
   this->load_settings(false);
+
+  xSemaphoreGive(this->lock_);
 }
 
 void IDFUARTComponent::load_settings(bool dump_config) {
@@ -121,20 +126,13 @@ void IDFUARTComponent::load_settings(bool dump_config) {
       return;
     }
   }
-#ifdef USE_UART_WAKE_LOOP_ON_RX
-  constexpr int event_queue_size = 20;
-  QueueHandle_t *event_queue_ptr = &this->uart_event_queue_;
-#else
-  constexpr int event_queue_size = 0;
-  QueueHandle_t *event_queue_ptr = nullptr;
-#endif
   err = uart_driver_install(this->uart_num_,        // UART number
                             this->rx_buffer_size_,  // RX ring buffer size
-                            0,  // TX ring buffer size. If zero, driver will not use a TX buffer and TX function will
-                                // block task until all data has been sent out
-                            event_queue_size,  // event queue size/depth
-                            event_queue_ptr,   // event queue
-                            0                  // Flags used to allocate the interrupt
+                            0,   // TX ring buffer size. If zero, driver will not use a TX buffer and TX function will
+                                 // block task until all data has been sent out
+                            20,  // event queue size/depth
+                            &this->uart_event_queue_,  // event queue
+                            0                          // Flags used to allocate the interrupt
   );
   if (err != ESP_OK) {
     ESP_LOGW(TAG, "uart_driver_install failed: %s", esp_err_to_name(err));
@@ -284,7 +282,9 @@ void IDFUARTComponent::set_rx_timeout(size_t rx_timeout) {
 }
 
 void IDFUARTComponent::write_array(const uint8_t *data, size_t len) {
+  xSemaphoreTake(this->lock_, portMAX_DELAY);
   int32_t write_len = uart_write_bytes(this->uart_num_, data, len);
+  xSemaphoreGive(this->lock_);
   if (write_len != (int32_t) len) {
     ESP_LOGW(TAG, "uart_write_bytes failed: %d != %zu", write_len, len);
     this->mark_failed();
@@ -299,6 +299,7 @@ void IDFUARTComponent::write_array(const uint8_t *data, size_t len) {
 bool IDFUARTComponent::peek_byte(uint8_t *data) {
   if (!this->check_read_timeout_())
     return false;
+  xSemaphoreTake(this->lock_, portMAX_DELAY);
   if (this->has_peek_) {
     *data = this->peek_byte_;
   } else {
@@ -310,6 +311,7 @@ bool IDFUARTComponent::peek_byte(uint8_t *data) {
       this->peek_byte_ = *data;
     }
   }
+  xSemaphoreGive(this->lock_);
   return true;
 }
 
@@ -318,6 +320,7 @@ bool IDFUARTComponent::read_array(uint8_t *data, size_t len) {
   int32_t read_len = 0;
   if (!this->check_read_timeout_(len))
     return false;
+  xSemaphoreTake(this->lock_, portMAX_DELAY);
   if (this->has_peek_) {
     length_to_read--;
     *data = this->peek_byte_;
@@ -326,6 +329,7 @@ bool IDFUARTComponent::read_array(uint8_t *data, size_t len) {
   }
   if (length_to_read > 0)
     read_len = uart_read_bytes(this->uart_num_, data, length_to_read, 20 / portTICK_PERIOD_MS);
+  xSemaphoreGive(this->lock_);
 #ifdef USE_UART_DEBUGGER
   for (size_t i = 0; i < len; i++) {
     this->debug_callback_.call(UART_DIRECTION_RX, data[i]);
@@ -338,7 +342,9 @@ size_t IDFUARTComponent::available() {
   size_t available = 0;
   esp_err_t err;
 
+  xSemaphoreTake(this->lock_, portMAX_DELAY);
   err = uart_get_buffered_data_len(this->uart_num_, &available);
+  xSemaphoreGive(this->lock_);
 
   if (err != ESP_OK) {
     ESP_LOGW(TAG, "uart_get_buffered_data_len failed: %s", esp_err_to_name(err));
@@ -352,7 +358,9 @@ size_t IDFUARTComponent::available() {
 
 void IDFUARTComponent::flush() {
   ESP_LOGVV(TAG, "    Flushing");
+  xSemaphoreTake(this->lock_, portMAX_DELAY);
   uart_wait_tx_done(this->uart_num_, portMAX_DELAY);
+  xSemaphoreGive(this->lock_);
 }
 
 void IDFUARTComponent::check_logger_conflict() {}
@@ -376,13 +384,6 @@ void IDFUARTComponent::start_rx_event_task_() {
   ESP_LOGV(TAG, "RX event task started");
 }
 
-// FreeRTOS task that relays UART ISR events to the main loop.
-// This task exists because wake_loop_threadsafe() is not ISR-safe (it uses a
-// UDP loopback socket), so we need a task as an ISR-to-main-loop trampoline.
-// IMPORTANT: This task must NOT call any UART wrapper methods (read_array,
-// write_array, peek_byte, etc.) or touch has_peek_/peek_byte_ — all reading
-// is done by the main loop. This task only reads from the event queue and
-// calls App.wake_loop_threadsafe().
 void IDFUARTComponent::rx_event_task_func(void *param) {
   auto *self = static_cast<IDFUARTComponent *>(param);
   uart_event_t event;
@@ -404,14 +405,8 @@ void IDFUARTComponent::rx_event_task_func(void *param) {
 
         case UART_FIFO_OVF:
         case UART_BUFFER_FULL:
-          // Don't call uart_flush_input() here — this task does not own the read side.
-          // ESP-IDF examples flush on overflow because the same task handles both events
-          // and reads, so flush and read are serialized. Here, reads happen on the main
-          // loop, so flushing from this task races with read_array() and can destroy data
-          // mid-read. The driver self-heals without an explicit flush: uart_read_bytes()
-          // calls uart_check_buf_full() after each chunk, which moves stashed FIFO bytes
-          // into the ring buffer and re-enables RX interrupts once space is freed.
-          ESP_LOGW(TAG, "FIFO overflow or ring buffer full");
+          ESP_LOGW(TAG, "FIFO overflow or ring buffer full - clearing");
+          uart_flush_input(self->uart_num_);
 #if defined(USE_SOCKET_SELECT_SUPPORT) && defined(USE_WAKE_LOOP_THREADSAFE)
           App.wake_loop_threadsafe();
 #endif

esphome/components/uart/uart_component_esp_idf.h

@@ -8,13 +8,6 @@
 
 namespace esphome::uart {
 
-/// ESP-IDF UART driver wrapper.
-///
-/// Thread safety: All public methods must only be called from the main loop.
-/// The ESP-IDF UART driver API does not guarantee thread safety, and ESPHome's
-/// peek byte state (has_peek_/peek_byte_) is not synchronized. The rx_event_task
-/// (when enabled) must not call any of these methods — it communicates with the
-/// main loop exclusively via App.wake_loop_threadsafe().
 class IDFUARTComponent : public UARTComponent, public Component {
  public:
   void setup() override;
@@ -33,9 +26,7 @@ class IDFUARTComponent : public UARTComponent, public Component {
   void flush() override;
 
   uint8_t get_hw_serial_number() { return this->uart_num_; }
-#ifdef USE_UART_WAKE_LOOP_ON_RX
   QueueHandle_t *get_uart_event_queue() { return &this->uart_event_queue_; }
-#endif
 
   /**
    * Load the UART with the current settings.
@@ -55,20 +46,18 @@ class IDFUARTComponent : public UARTComponent, public Component {
  protected:
   void check_logger_conflict() override;
   uart_port_t uart_num_;
+  QueueHandle_t uart_event_queue_;
   uart_config_t get_config_();
+  SemaphoreHandle_t lock_;
 
   bool has_peek_{false};
   uint8_t peek_byte_;
 
 #ifdef USE_UART_WAKE_LOOP_ON_RX
-  // RX notification support — runs on a separate FreeRTOS task.
-  // IMPORTANT: rx_event_task_func must NOT call any UART wrapper methods (read_array,
-  // write_array, etc.) or touch has_peek_/peek_byte_. It must only read from the
-  // event queue and call App.wake_loop_threadsafe().
+  // RX notification support
   void start_rx_event_task_();
   static void rx_event_task_func(void *param);
 
-  QueueHandle_t uart_event_queue_;
   TaskHandle_t rx_event_task_handle_{nullptr};
 #endif  // USE_UART_WAKE_LOOP_ON_RX
 };

esphome/const.py

@@ -4,7 +4,7 @@ from enum import Enum
 
 from esphome.enum import StrEnum
 
-__version__ = "2026.2.0b2"
+__version__ = "2026.3.0-dev"
 
 ALLOWED_NAME_CHARS = "abcdefghijklmnopqrstuvwxyz0123456789-_"
 VALID_SUBSTITUTIONS_CHARACTERS = (

esphome/core/time.cpp

@@ -2,7 +2,6 @@
 #include "helpers.h"
 
 #include <algorithm>
-#include <cinttypes>
 
 namespace esphome {
 
@@ -67,58 +66,123 @@ std::string ESPTime::strftime(const char *format) {
 
 std::string ESPTime::strftime(const std::string &format) { return this->strftime(format.c_str()); }
 
-bool ESPTime::strptime(const char *time_to_parse, size_t len, ESPTime &esp_time) {
-  uint16_t year;
-  uint8_t month;
-  uint8_t day;
-  uint8_t hour;
-  uint8_t minute;
-  uint8_t second;
-  int num;
-  const int ilen = static_cast<int>(len);
-
-  if (sscanf(time_to_parse, "%04hu-%02hhu-%02hhu %02hhu:%02hhu:%02hhu %n", &year, &month, &day,  // NOLINT
-             &hour,                                                                              // NOLINT
-             &minute,                                                                            // NOLINT
-             &second, &num) == 6 &&                                                              // NOLINT
-      num == ilen) {
-    esp_time.year = year;
-    esp_time.month = month;
-    esp_time.day_of_month = day;
-    esp_time.hour = hour;
-    esp_time.minute = minute;
-    esp_time.second = second;
-  } else if (sscanf(time_to_parse, "%04hu-%02hhu-%02hhu %02hhu:%02hhu %n", &year, &month, &day,  // NOLINT
-                    &hour,                                                                       // NOLINT
-                    &minute, &num) == 5 &&                                                       // NOLINT
-             num == ilen) {
-    esp_time.year = year;
-    esp_time.month = month;
-    esp_time.day_of_month = day;
-    esp_time.hour = hour;
-    esp_time.minute = minute;
-    esp_time.second = 0;
-  } else if (sscanf(time_to_parse, "%02hhu:%02hhu:%02hhu %n", &hour, &minute, &second, &num) == 3 &&  // NOLINT
-             num == ilen) {
-    esp_time.hour = hour;
-    esp_time.minute = minute;
-    esp_time.second = second;
-  } else if (sscanf(time_to_parse, "%02hhu:%02hhu %n", &hour, &minute, &num) == 2 &&  // NOLINT
-             num == ilen) {
-    esp_time.hour = hour;
-    esp_time.minute = minute;
-    esp_time.second = 0;
-  } else if (sscanf(time_to_parse, "%04hu-%02hhu-%02hhu %n", &year, &month, &day, &num) == 3 &&  // NOLINT
-             num == ilen) {
-    esp_time.year = year;
-    esp_time.month = month;
-    esp_time.day_of_month = day;
-  } else {
-    return false;
+// Helper to parse exactly N digits, returns false if not enough digits
+static bool parse_digits(const char *&p, const char *end, int count, uint16_t &value) {
+  value = 0;
+  for (int i = 0; i < count; i++) {
+    if (p >= end || *p < '0' || *p > '9')
+      return false;
+    value = value * 10 + (*p - '0');
+    p++;
   }
   return true;
 }
 
+// Helper to check for expected character
+static bool expect_char(const char *&p, const char *end, char expected) {
+  if (p >= end || *p != expected)
+    return false;
+  p++;
+  return true;
+}
+
+bool ESPTime::strptime(const char *time_to_parse, size_t len, ESPTime &esp_time) {
+  // Supported formats:
+  //   YYYY-MM-DD HH:MM:SS (19 chars)
+  //   YYYY-MM-DD HH:MM    (16 chars)
+  //   YYYY-MM-DD          (10 chars)
+  //   HH:MM:SS            (8 chars)
+  //   HH:MM               (5 chars)
+
+  if (time_to_parse == nullptr || len == 0)
+    return false;
+
+  const char *p = time_to_parse;
+  const char *end = time_to_parse + len;
+  uint16_t v1, v2, v3, v4, v5, v6;
+
+  // Try date formats first (start with 4-digit year)
+  if (len >= 10 && time_to_parse[4] == '-') {
+    // YYYY-MM-DD...
+    if (!parse_digits(p, end, 4, v1))
+      return false;
+    if (!expect_char(p, end, '-'))
+      return false;
+    if (!parse_digits(p, end, 2, v2))
+      return false;
+    if (!expect_char(p, end, '-'))
+      return false;
+    if (!parse_digits(p, end, 2, v3))
+      return false;
+
+    esp_time.year = v1;
+    esp_time.month = v2;
+    esp_time.day_of_month = v3;
+
+    if (p == end) {
+      // YYYY-MM-DD (date only)
+      return true;
+    }
+
+    if (!expect_char(p, end, ' '))
+      return false;
+
+    // Continue with time part: HH:MM[:SS]
+    if (!parse_digits(p, end, 2, v4))
+      return false;
+    if (!expect_char(p, end, ':'))
+      return false;
+    if (!parse_digits(p, end, 2, v5))
+      return false;
+
+    esp_time.hour = v4;
+    esp_time.minute = v5;
+
+    if (p == end) {
+      // YYYY-MM-DD HH:MM
+      esp_time.second = 0;
+      return true;
+    }
+
+    if (!expect_char(p, end, ':'))
+      return false;
+    if (!parse_digits(p, end, 2, v6))
+      return false;
+
+    esp_time.second = v6;
+    return p == end;  // YYYY-MM-DD HH:MM:SS
+  }
+
+  // Try time-only formats (HH:MM[:SS])
+  if (len >= 5 && time_to_parse[2] == ':') {
+    if (!parse_digits(p, end, 2, v1))
+      return false;
+    if (!expect_char(p, end, ':'))
+      return false;
+    if (!parse_digits(p, end, 2, v2))
+      return false;
+
+    esp_time.hour = v1;
+    esp_time.minute = v2;
+
+    if (p == end) {
+      // HH:MM
+      esp_time.second = 0;
+      return true;
+    }
+
+    if (!expect_char(p, end, ':'))
+      return false;
+    if (!parse_digits(p, end, 2, v3))
+      return false;
+
+    esp_time.second = v3;
+    return p == end;  // HH:MM:SS
+  }
+
+  return false;
+}
+
 void ESPTime::increment_second() {
   this->timestamp++;
   if (!increment_time_value(this->second, 0, 60))
@@ -193,27 +257,67 @@ void ESPTime::recalc_timestamp_utc(bool use_day_of_year) {
 }
 
 void ESPTime::recalc_timestamp_local() {
-  struct tm tm;
+#ifdef USE_TIME_TIMEZONE
+  // Calculate timestamp as if fields were UTC
+  this->recalc_timestamp_utc(false);
+  if (this->timestamp == -1) {
+    return;  // Invalid time
+  }
 
-  tm.tm_year = this->year - 1900;
-  tm.tm_mon = this->month - 1;
-  tm.tm_mday = this->day_of_month;
-  tm.tm_hour = this->hour;
-  tm.tm_min = this->minute;
-  tm.tm_sec = this->second;
-  tm.tm_isdst = -1;
+  // Now convert from local to UTC by adding the offset
+  // POSIX: local = utc - offset, so utc = local + offset
+  const auto &tz = time::get_global_tz();
 
-  this->timestamp = mktime(&tm);
+  if (!tz.has_dst()) {
+    // No DST - just apply standard offset
+    this->timestamp += tz.std_offset_seconds;
+    return;
+  }
+
+  // Try both interpretations to match libc mktime() with tm_isdst=-1
+  // For ambiguous times (fall-back repeated hour), prefer standard time
+  // For invalid times (spring-forward skipped hour), libc normalizes forward
+  time_t utc_if_dst = this->timestamp + tz.dst_offset_seconds;
+  time_t utc_if_std = this->timestamp + tz.std_offset_seconds;
+
+  bool dst_valid = time::is_in_dst(utc_if_dst, tz);
+  bool std_valid = !time::is_in_dst(utc_if_std, tz);
+
+  if (dst_valid && std_valid) {
+    // Ambiguous time (repeated hour during fall-back) - prefer standard time
+    this->timestamp = utc_if_std;
+  } else if (dst_valid) {
+    // Only DST interpretation is valid
+    this->timestamp = utc_if_dst;
+  } else if (std_valid) {
+    // Only standard interpretation is valid
+    this->timestamp = utc_if_std;
+  } else {
+    // Invalid time (skipped hour during spring-forward)
+    // libc normalizes forward: 02:30 CST -> 08:30 UTC -> 03:30 CDT
+    // Using std offset achieves this since the UTC result falls during DST
+    this->timestamp = utc_if_std;
+  }
+#else
+  // No timezone support - treat as UTC
+  this->recalc_timestamp_utc(false);
+#endif
 }
 
 int32_t ESPTime::timezone_offset() {
+#ifdef USE_TIME_TIMEZONE
   time_t now = ::time(nullptr);
-  struct tm local_tm = *::localtime(&now);
-  local_tm.tm_isdst = 0;  // Cause mktime to ignore daylight saving time because we want to include it in the offset.
-  time_t local_time = mktime(&local_tm);
-  struct tm utc_tm = *::gmtime(&now);
-  time_t utc_time = mktime(&utc_tm);
-  return static_cast<int32_t>(local_time - utc_time);
+  const auto &tz = time::get_global_tz();
+  // POSIX offset is positive west, but we return offset to add to UTC to get local
+  // So we negate the POSIX offset
+  if (time::is_in_dst(now, tz)) {
+    return -tz.dst_offset_seconds;
+  }
+  return -tz.std_offset_seconds;
+#else
+  // No timezone support - no offset
+  return 0;
+#endif
 }
 
 bool ESPTime::operator<(const ESPTime &other) const { return this->timestamp < other.timestamp; }

esphome/core/time.h

@@ -7,6 +7,10 @@
 #include <span>
 #include <string>
 
+#ifdef USE_TIME_TIMEZONE
+#include "esphome/components/time/posix_tz.h"
+#endif
+
 namespace esphome {
 
 template<typename T> bool increment_time_value(T &current, uint16_t begin, uint16_t end);
@@ -105,11 +109,17 @@ struct ESPTime {
    * @return The generated ESPTime
    */
   static ESPTime from_epoch_local(time_t epoch) {
-    struct tm *c_tm = ::localtime(&epoch);
-    if (c_tm == nullptr) {
-      return ESPTime{};  // Return an invalid ESPTime
+#ifdef USE_TIME_TIMEZONE
+    struct tm local_tm;
+    if (time::epoch_to_local_tm(epoch, time::get_global_tz(), &local_tm)) {
+      return ESPTime::from_c_tm(&local_tm, epoch);
     }
-    return ESPTime::from_c_tm(c_tm, epoch);
+    // Fallback to UTC if conversion failed
+    return ESPTime::from_epoch_utc(epoch);
+#else
+    // No timezone support - return UTC (no TZ configured, localtime would return UTC anyway)
+    return ESPTime::from_epoch_utc(epoch);
+#endif
   }
   /** Convert an UTC epoch timestamp to a UTC time ESPTime instance.
    *

script/build_language_schema.py

@@ -369,7 +369,7 @@ def get_logger_tags():
         "api.service",
     ]
     for file in CORE_COMPONENTS_PATH.rglob("*.cpp"):
-        data = file.read_text(encoding="utf-8")
+        data = file.read_text()
         match = pattern.search(data)
         if match:
             tags.append(match.group(1))

script/cpp_unit_test.py

@@ -66,6 +66,7 @@ def create_test_config(config_name: str, includes: list[str]) -> dict:
                 ],
                 "build_flags": [
                     "-Og",  # optimize for debug
+                    "-DUSE_TIME_TIMEZONE",  # enable timezone code paths for testing
                 ],
                 "debug_build_flags": [  # only for debug builds
                     "-g3",  # max debug info

tests/integration/test_alarm_control_panel_state_transitions.py

@@ -270,14 +270,6 @@ async def test_alarm_control_panel_state_transitions(
         # The chime_sensor has chime: true, so opening it while disarmed
         # should trigger on_chime callback
 
-        # Set up future for the on_ready from opening the chime sensor
-        # (alarm becomes "not ready" when chime sensor opens).
-        # We must wait for this BEFORE creating the close future, otherwise
-        # the open event's log can arrive late and resolve the close future,
-        # causing the test to proceed before the chime close is processed.
-        ready_after_chime_open: asyncio.Future[bool] = loop.create_future()
-        ready_futures.append(ready_after_chime_open)
-
         # We're currently DISARMED - open the chime sensor
         client.switch_command(chime_switch_info.key, True)
 
@@ -287,18 +279,11 @@ async def test_alarm_control_panel_state_transitions(
         except TimeoutError:
             pytest.fail(f"on_chime callback not fired. Log lines: {log_lines[-20:]}")
 
-        # Wait for the on_ready from the chime sensor opening
-        try:
-            await asyncio.wait_for(ready_after_chime_open, timeout=2.0)
-        except TimeoutError:
-            pytest.fail(
-                f"on_ready callback not fired when chime sensor opened. "
-                f"Log lines: {log_lines[-20:]}"
-            )
-
-        # Now create the future for the close event and close the sensor.
-        # Since we waited for the open event above, the close event's
-        # on_ready log cannot be confused with the open event's.
+        # Close the chime sensor and wait for alarm to become ready again
+        # We need to wait for this transition before testing door sensor,
+        # otherwise there's a race where the door sensor state change could
+        # arrive before the chime sensor state change, leaving the alarm in
+        # a continuous "not ready" state with no on_ready callback fired.
         ready_after_chime_close: asyncio.Future[bool] = loop.create_future()
         ready_futures.append(ready_after_chime_close)