* Add two 430FX-based Vectras code.
* Add two 430FX-based Vectras machine table entries.
* Organize the 430FX-based Vectras code.
* Add machine definitions for the two 430FX-based Vectras.
* Add the Vectra 500 Series xxx/MT to the GPIO values from the VL/5...
makes it report CPU clocks properly.
* Darn, forgot something.
* Updated and fix the BIOS selector for VE 5/xxx Series 2
* Added beta v4.51G BIOS to P5MP3
* Added the earliest 4.51PG BIOS to AX59 Pro
Also internal_name corrections
* Added the non-OEM(?) BIOS to 6110Zu
* Added the non-OEM 4.51PG and unofficial 6.00PG
BIOSes to Compaq Compaq ProSignia S31x, which is renamed into ECS P6BXT-A+.
Also unblock Cyrix CPUs as well as unofficial 6.00PG BIOS supports them.
* Removed the v4.51PG due to POST failure
Also slightly changed the maximum voltage bus to 124MHz per unofficial v6.00 BIOS, corrected the BIOS name per the BIOS screen on that BIOS, and added the author credit.
Also lowered the minimum memory on LG IBM MS-6106 to 8mb.
* Added the 050591 BIOS to DataExpert 386WB
* Renamed 386WB to 386C
* Make configurations intact
Per OBattler.
* Added Tulip BIOS to Tyan Tsunami ATX
* Added non-OEM BIOS to TriGem Delhi-III + renamed
* Added the 1999 4.50PG BIOS to FIC PT-2000
* Added Rainbow BIOSes to MS-5119 and FMB
Also added codenames/original names to ValuePoint P60, PowerMate Vxxx, and E-1000
* Added the earliest v4.51PG BIOS to AOpen AX6BC
Also corrected the latest BIOS name to FIC PT-2000
* Correct the BIOS version names for AX6BC
* Changed the name for HP i440ZX machine
* Slightly change the notes for Delhi-III
* Add BIOS selector and 1996 BIOS to the NEC PowerMate Vxxx
Add a BIOS selector and the 1996 BIOS to the NEC PowerMate Vxxx.
* m_at_socket5.c: Version 4.04 -> Version 4.05
-Slightly changed the name for IBM PC 3x0 (type 65x6), with the addition of its codename
-Slightly changed the revision name to DFI G586VPM
-Corrected the configuration for Gateway Lucas according to MSI MS-5185's manual, as well as bringing the ISA slot to it
-Alphabetize the DFI K6BV3+
* Change BIOS loading (temporarily)
* Change GPIO related stuff on the PC 330 65x6...
CPU clock is now properly reported up to 166 MHz.
* Add IBM PC 330 type 65x6 machine table entry.
* Add IBM PC 330 type 65x6 machine definition.
* Fix a compile breaking error.
* Block AMD K5/Cx686 CPUs from the IBM PC 330/350 type 65x6.
* Correct the PC 330/350 ROM path.
* add DTK PIM-TB10-Z BIOS 2.39
* change Multitech PC-500/PC500+ KBC type to XTClone
* 1. add ISA RTC century field to support Multitech onboard RTC
2. hard-coded I/O port and IRQ for Multitech onboard RTC until
find a prorper way to obtain correct value from machine config
* Update machine_table.c
Rename Packard Bell motherboards to be in line with the actual board names, and not machine oem names, which aren't fully accurate.
* Update machine_table.c
Edited more models based on actual names: https://pb.retropc.se/
* Add the Sony Vaio PCV-130/150 as a selectable BIOS for the AN430TX
* Add Sony CDU-611 24x CD-ROM drive
This may not have been the drive included in the Vaio PCV-130/150 but is contemporary, is the correct speed and satisfies the vendor-locked CD-ROM driver on the recovery CD.
* Add the VLSI SuperCore and Wildcat chipsets
* Disable logging and minor cleanups
* Add the AST Bravo MS P/90 (Rattler)
* Add the AT&T Globalyst 620 (NCR 3248)
* Add the DEC Celebris 5xx
* Add the DFI G586VPM Rev C
* Add the Packard Bell PB600
* Fix southbridge PCI Command Register writes
* Block the Cyrix 6x86 on incompatible machines
* Rename the AT&T Globalyst 620 to include the names of the NCR counterparts
* Add the Zeos Pantera Wildcat
* Add RZ-1001 variant of the RZ-1000 PCI IDE controller and made the Zeos Pantera Wildcat use it
* Add the Micronics M54Si
* Update machine_table.c
* Re-add new machines to machine table
* Update machine inits to use new KBC device names
* Use correct machine init method as NVRAM init is done by the chipset code
* Use a Phoenix KBC for the AST Bravo since the BIOS calls command D5h to show the KBC revision
* Update KBC comments in machine table
* Update VLSI 59x chipset comments
* Update machine inits for new super I/O code
* Reorganize machines and update comments
* AST readout device actually has multiple indexed registers
* Implement the AST Bravo MS ECP DMA configuration
* Implement jumpered/hardwired ECP DMA for the remaining machines
* Fix ECP DMA on the AST Bravo MS
* Move the DEC Celebris to the Socket 4/5 category
* Implement SMI I/O port read, fixes APM init on AT&T, Micronics and Zeos machines
* Convert AST readout device to new logging system
* Update KBC init to new method
* Cleanups
