1. Initialize Multifunction indexes 0x0D and 0x0E properly, should fix inverted colors on S3 OS/2 Warp drivers.
2. Make the remaining Vision868/968 only ports handle the 32-bit toggling properly.
3. Cleanups
Fix nibble pixtrans on bitblt command (CMD 6), this makes icons and stuff on MS OS/2 1.10 Nokia's 8514 driver no longer glitchy (IBM's was already fine as is and it still is).
Cirrus 5436/46 and 5480.
Finally fixed the Solaris 2.6 font issue, was a dword swap one with color expansion.
S3.
1. Make 868/968 ignore horizontal skew, ergo horizontal override until a proper solution is found regarding hardware tests.
2. Fixed a minor mix issue with S3 911/924 Win3.1 drivers in 8bpp mode.
1. Finally add the ATI 8514/A Ultra add-on BIOS in both ISA and MCA variants (despite the ROM page failure on POST).
2. Fixed a mode switch bug in the Mach8 (both add-on and vga combo) when exiting the Win3.x GUI using the native drivers.
3. Corrected (best possible) the eeprom load of the Mach8 products.
4. Partial implementation of the FIFO on the 8514/A compatible products including Mach8/32 and plain IBM 8514/A.
1. ATI Extended 8514/A mode may not use bit 5 of ATI reg 0xb0 sometimes but at the same time it won't use the standard VGA way of setting up 256+ colors, therefore, in the VGA DAC writes, use standard VGA way to revert to VGA mode in the writes instead of relying on bit 5 of ATI reg 0xb0 being enabled/disabled there. Fixes mode switches in VLB/PCI configurations using Windows 9x and possibly other stuff, ISA is unaffected and still works fine.
2. Added more logs and and remove/set I/O handlers correctly for the PCI side.
Mark the ATI extended 8514/A mode accordingly (that is, if bit 5 of ATI reg 0xb0 and using ATI extended ports at the same time). Fixes wrong colors in some instances using standard IBM 8514/A drivers on Mach32.
1. Added the missing call to mach32_updatemapping from port 0x3CF through its index 6.
2. If the accelerator DAC is active and the extended 256 color bit is on too then enable 8514/A mode when needed, otherwise it's VGA mode or decided by the passthrough/clock selection ports.
3. VGA DAC reads are redirected to the 8514/A DAC reads only when 8514/A mode is on.
1. vga_on global variable removed, as it didn't play well with 2 subsystems at once (8514/A and XGA both enabled).
2. Emulate the Foreground/Background Color aliases of PIX_TRANS properly when not executing a command.
3. Voodoo 3D override now works properly (again) with Mach32 PCI cards and others by turning the 8514/A timer off and on accordingly.
1. Simplified 4bpp rendering mode.
2. Implement CRTC31 bit 0 functionality which enables/disables the vendor banks. Fixes Diamond Stealth 64 964 VRAM (VLB/PCI) detection on NT 3.1 (and possibly other cards) while keeping NT 3.1 347.1's full screen Command Prompt test normal without garbage using the 911/924 chips.
IBM 8514/A (MCA/ISA).
Added a configure button to the QT frontend for the amount of memory used by said add-on chips.
XGA:
Forgot a change about the 4mb aperture.
1. Pattern/font fixes for Windows 3.1's third party XGA drivers as well as OS/2's win3.x' box (seamless and full).
2. The 4MB aperture is still used internally even if the 1MB one is in use, fixes OS/2's XGA driver on boot when less than 16MB of memory is used.
8514/A compatibles:
1. The mode switch (from VGA to 8514/A/ATI and vice-versa) has been fixed again (for the Nth time).
2. Removed a pattern hack used on DPCONFIG = 0x5211 on bitblt, now patterns work properly using the ATI Mach8 3.0 win3.1x drivers.
3. Clipping regs are more accurate for acceleration.
XGA 1-2:
A picky OS is a picky OS, fixes to the Win95 fonts (which uses the pattern sources) applied.
