895b6e89c5
* fix interrupt handling for the ln882h - all GPIOS can generate interrupts - added calls to NVIC_SetPriority/NVIC_EnableIRQ/NVIC_DisableIRQ * fix clang formatting error * only call NVIC_DisableIRQ if no other gpio is using an interrupt * fix (again) clang-format errors * add IRQ capability on all pins * don't bother with NVIC_DisableIRQ * use pin->gpio instead of interruptNumber, use macro GPIO_GET_PORT for clarity * Mark interrupts as supported for the LN882H --------- Co-authored-by: lamauny <pub.elc@free.fr>
55 lines
2.4 KiB
C
55 lines
2.4 KiB
C
/* This file was auto-generated from wl2s.json using boardgen */
|
|
|
|
#include <Arduino.h>
|
|
|
|
#ifdef LT_VARIANT_INCLUDE
|
|
#include LT_VARIANT_INCLUDE
|
|
#endif
|
|
|
|
// clang-format off
|
|
PinInfo lt_arduino_pin_info_list[PINS_COUNT] = {
|
|
// D0: PA07, SD_D3, I2S0_RX, I2C0_SCL, I2C0_SDA
|
|
{PA_7, PIN_I2S | PIN_I2C | PIN_IRQ | PIN_GPIO, PIN_NONE, 0},
|
|
// D1: PA12, I2C0_SCL, I2C0_SDA
|
|
{PA_12, PIN_I2C | PIN_IRQ | PIN_GPIO, PIN_NONE, 0},
|
|
// D2: PA03, UART0_RX, I2C0_SCL, I2C0_SDA
|
|
{PA_3, PIN_UART | PIN_I2C | PIN_IRQ | PIN_GPIO, PIN_NONE, 0},
|
|
// D3: PA10, SD_D0, I2S0_TX, I2C0_SCL, I2C0_SDA
|
|
{PA_10, PIN_I2S | PIN_I2C | PIN_IRQ | PIN_GPIO, PIN_NONE, 0},
|
|
// D4: PA02, UART0_TX, I2C0_SCL, I2C0_SDA
|
|
{PA_2, PIN_UART | PIN_I2C | PIN_IRQ | PIN_GPIO, PIN_NONE, 0},
|
|
// D5: PA00, ADC2, I2C0_SCL, I2C0_SDA
|
|
{PA_0, PIN_I2C | PIN_ADC | PIN_IRQ | PIN_GPIO, PIN_NONE, 0},
|
|
// D6: PB03, ADC5, I2C0_SCL, I2C0_SDA
|
|
{PB_3, PIN_I2C | PIN_ADC | PIN_IRQ | PIN_GPIO, PIN_NONE, 0},
|
|
// D7: PA11, SD_D1, I2C0_SCL, I2C0_SDA
|
|
{PA_11, PIN_I2C | PIN_IRQ | PIN_GPIO, PIN_NONE, 0},
|
|
// D8: PA09, BOOT1, SD_CLK, I2S0_SCLK, I2C0_SCL, I2C0_SDA
|
|
{PA_9, PIN_I2S | PIN_I2C | PIN_IRQ | PIN_GPIO, PIN_NONE, 0},
|
|
// D9: PB08, UART1_RX, I2C0_SCL, I2C0_SDA
|
|
{PB_8, PIN_UART | PIN_I2C | PIN_IRQ | PIN_GPIO, PIN_NONE, 0},
|
|
// D10: PB09, UART1_TX, I2C0_SCL, I2C0_SDA
|
|
{PB_9, PIN_UART | PIN_I2C | PIN_IRQ | PIN_GPIO, PIN_NONE, 0},
|
|
// D11: PA05, I2C0_SCL, I2C0_SDA
|
|
{PA_5, PIN_I2C | PIN_IRQ | PIN_GPIO, PIN_NONE, 0},
|
|
// D12: PA01, ADC3, SWDIO, I2C0_SCL, I2C0_SDA
|
|
{PA_1, PIN_SWD | PIN_I2C | PIN_ADC | PIN_IRQ | PIN_GPIO, PIN_NONE, 0},
|
|
};
|
|
|
|
PinInfo *lt_arduino_pin_gpio_map[] = {
|
|
[0] = &(lt_arduino_pin_info_list[5]), // PA_0 (D5)
|
|
[1] = &(lt_arduino_pin_info_list[12]), // PA_1 (D12)
|
|
[2] = &(lt_arduino_pin_info_list[4]), // PA_2 (D4)
|
|
[3] = &(lt_arduino_pin_info_list[2]), // PA_3 (D2)
|
|
[5] = &(lt_arduino_pin_info_list[11]), // PA_5 (D11)
|
|
[7] = &(lt_arduino_pin_info_list[0]), // PA_7 (D0)
|
|
[9] = &(lt_arduino_pin_info_list[8]), // PA_9 (D8)
|
|
[10] = &(lt_arduino_pin_info_list[3]), // PA_10 (D3)
|
|
[11] = &(lt_arduino_pin_info_list[7]), // PA_11 (D7)
|
|
[12] = &(lt_arduino_pin_info_list[1]), // PA_12 (D1)
|
|
[19] = &(lt_arduino_pin_info_list[6]), // PB_3 (D6)
|
|
[24] = &(lt_arduino_pin_info_list[9]), // PB_8 (D9)
|
|
[25] = &(lt_arduino_pin_info_list[10]), // PB_9 (D10)
|
|
};
|
|
// clang-format on
|