diff --git a/boards/SUMMARY.md b/boards/SUMMARY.md index 9df0ab5..e26cd5d 100644 --- a/boards/SUMMARY.md +++ b/boards/SUMMARY.md @@ -3,6 +3,9 @@ - [BW12](../boards/bw12/README.md) - [CB2S](../boards/cb2s/README.md) - [WB2L](../boards/wb2l/README.md) +- [WB2S](../boards/wb2s/README.md) +- [WB3L](../boards/wb3l/README.md) +- [WB3S](../boards/wb3s/README.md) - [WR2](../boards/wr2/README.md) - [WR2E](../boards/wr2e/README.md) - [WR3](../boards/wr3/README.md) diff --git a/boards/_base/pcb/wb2s-test.json b/boards/_base/pcb/wb2s-test.json new file mode 100644 index 0000000..0d32c26 --- /dev/null +++ b/boards/_base/pcb/wb2s-test.json @@ -0,0 +1,158 @@ +{ + "pcb": { + "test_pads": { + "TRST": "wb2s.back.cen.anchor", + "TRX2": "wb2s.back.2rx.anchor", + "TTX2": "wb2s.back.2tx.anchor", + "TGND": "wb2s.back.gnd.anchor", + "TSCK": "wb2s.back.sck.anchor", + "TCSN": "wb2s.back.csn.anchor", + "TSI": "wb2s.back.si.anchor", + "TSO": "wb2s.back.adc_so.anchor", + "TPWM3": "wb2s.back.pwm3.anchor", + "TVCC": "wb2s.back.vbat.anchor" + }, + "back": [ + { + "name": "test_pad_1mm", + "pos": "2.6,6.2" + }, + { + "id": "sck", + "name": "label_line_2mm_up", + "pos": "2.6,5.4", + "vars": { + "DIR": "left", + "W": 1.3, + "H": 2 + } + }, + { + "name": "test_pad_1mm", + "pos": "4.6,6.2" + }, + { + "id": "pwm3", + "name": "label_line_2mm_up", + "pos": "4.6,5.4", + "vars": { + "DIR": "left", + "W": 3.3, + "H": 4 + } + }, + { + "name": "test_pad_1mm", + "pos": "7.0,6.2" + }, + { + "id": "2rx", + "name": "label_line_2mm_up", + "pos": "7.0,5.4", + "vars": { + "DIR": "right", + "W": 2, + "H": 4 + } + }, + { + "name": "test_pad_1mm", + "pos": "9.0,6.2" + }, + { + "id": "2tx", + "name": "label_line_2mm_up", + "pos": "9.0,5.4", + "vars": { + "DIR": "right", + "W": 0, + "H": 2 + } + }, + { + "name": "test_pad_1mm", + "pos": "3.0,8.3" + }, + { + "id": "csn", + "name": "label_line_2mm_up", + "pos": "2.2,8.4", + "vars": { + "DIR": "left", + "W": 0.9, + "H": 0 + } + }, + { + "name": "test_pad_1mm", + "pos": "5.2,8.8" + }, + { + "id": "si", + "name": "label_line_2mm_up", + "pos": "6.0,8.9", + "vars": { + "DIR": "right", + "W": 3, + "H": 0 + } + }, + { + "name": "test_pad_1mm", + "pos": "2.1,11.6" + }, + { + "id": "adc_so", + "name": "label_line_2mm_up", + "pos": "1.3,11.7", + "vars": { + "DIR": "left", + "W": 0, + "H": 0 + } + }, + { + "name": "test_pad_1mm", + "pos": "4.3,11.6" + }, + { + "id": "cen", + "name": "label_line_2mm_up", + "pos": "5.1,11.7", + "vars": { + "DIR": "right", + "W": 3.9, + "H": 0 + } + }, + { + "name": "test_pad_1mm", + "pos": "2.5,14.5" + }, + { + "id": "vbat", + "name": "label_line_2mm_up", + "pos": "1.7,14.6", + "vars": { + "DIR": "left", + "W": 0.4, + "H": 0 + } + }, + { + "name": "test_pad_1mm", + "pos": "4.8,14.5" + }, + { + "id": "gnd", + "name": "label_line_2mm_up", + "pos": "5.6,14.6", + "vars": { + "DIR": "right", + "W": 3.4, + "H": 0 + } + } + ] + } +} diff --git a/boards/_base/pcb/wb2s.json b/boards/_base/pcb/wb2s.json new file mode 100644 index 0000000..eaf7cc0 --- /dev/null +++ b/boards/_base/pcb/wb2s.json @@ -0,0 +1,102 @@ +{ + "pcb": { + "scale": 10.5, + "templates": [ + "tuya2", + "rf-15mm-type1", + "tuya2-shield" + ], + "vars": { + "MASK_PRESET": "mask_blue_light", + "TRACE_COLOR": "#58839B", + "SILK_COLOR": "white" + }, + "pinout_hidden": "I2S,FLASH", + "pinout": { + "1": { + "PWR": 3.3 + }, + "2": { + "IC": 24, + "ARD": "D0" + }, + "3": { + "GND": null + }, + "4": { + "IC": 23, + "ARD": "D1" + }, + "5": { + "IC": 26, + "ARD": "D4" + }, + "6": { + "IC": 22, + "ARD": "D2" + }, + "7": { + "IC": 27, + "ARD": "D5" + }, + "8": { + "IC": 17, + "ARD": [ + "D3", + "A0" + ] + }, + "9": { + "IC": 16, + "ARD": "D6" + }, + "10": { + "IC": 21 + }, + "11": { + "IC": 15, + "ARD": "D7" + }, + "TSCK": { + "IC": 20, + "ARD": "D8" + }, + "TPWM3": { + "IC": 25, + "ARD": "D9" + }, + "TRX2": { + "IC": 28, + "ARD": "D10" + }, + "TTX2": { + "IC": 29, + "ARD": "D11" + }, + "TCSN": { + "IC": 19, + "ARD": "D12" + }, + "TSI": { + "IC": 18, + "ARD": "D13" + }, + "TSO": { + "IC": 17, + "ARD": [ + "D3", + "A0" + ] + }, + "TRST": { + "CTRL": "^RST" + }, + "TVCC": { + "PWR": 3.3 + }, + "TGND": { + "GND": null + } + } + } +} diff --git a/boards/_base/pcb/wb3l.json b/boards/_base/pcb/wb3l.json new file mode 100644 index 0000000..b257094 --- /dev/null +++ b/boards/_base/pcb/wb3l.json @@ -0,0 +1,106 @@ +{ + "pcb": { + "templates": [ + "esp12e-21", + "esp12e-shield-nohole", + "tuya-16x24", + "rf-16mm-type1" + ], + "vars": { + "MASK_PRESET": "mask_white", + "TRACE_COLOR": "#E0E0E0", + "SILK_COLOR": "black", + "PINTYPE_VERT": "pin_vert_2mm_cast_nohole", + "PINTYPE_HORZ": "pin_horz_2mm_cast_nohole" + }, + "pinout_hidden": "I2S,SD,SPI", + "pinout": { + "1": { + "NC": null + }, + "2": { + "IC": 17, + "ARD": [ + "D0", + "A0" + ] + }, + "3": { + "IC": 21 + }, + "4": { + "IC": 11, + "ARD": "D1" + }, + "5": { + "IC": 15, + "ARD": "D2" + }, + "6": { + "IC": 16, + "ARD": "D3" + }, + "7": { + "IC": 22, + "ARD": "D4" + }, + "8": { + "PWR": 3.3 + }, + "9": { + "GND": null + }, + "10": { + "IC": 25, + "ARD": "D5" + }, + "11": { + "IC": 29, + "ARD": "D6" + }, + "12": { + "IC": 12, + "ARD": "D7" + }, + "13": { + "IC": 24, + "ARD": "D8" + }, + "14": { + "IC": 23, + "ARD": "D9" + }, + "15": { + "IC": 26, + "ARD": "D10" + }, + "16": { + "IC": 27, + "ARD": "D11" + }, + "17": { + "IC": 17, + "ARD": [ + "D0", + "A0" + ] + }, + "18": { + "IC": 18, + "ARD": "D12" + }, + "19": { + "IC": 19, + "ARD": "D13" + }, + "20": { + "IC": 20, + "ARD": "D14" + }, + "21": { + "IC": 28, + "ARD": "D15" + } + } + } +} diff --git a/boards/_base/pcb/wb3s.json b/boards/_base/pcb/wb3s.json new file mode 100644 index 0000000..2d3f136 --- /dev/null +++ b/boards/_base/pcb/wb3s.json @@ -0,0 +1,108 @@ +{ + "pcb": { + "templates": [ + "esp12e-22", + "esp12e-shield-nohole", + "tuya-16x24", + "rf-16mm-type1" + ], + "vars": { + "MASK_PRESET": "mask_blue_light", + "TRACE_COLOR": "#58839B", + "SILK_COLOR": "white", + "PINTYPE_VERT": "pin_vert_2mm_cast_nohole", + "PINTYPE_HORZ": "pin_horz_2mm_cast_nohole" + }, + "pinout_hidden": "I2S,SD,SPI", + "pinout": { + "1": { + "IC": 21 + }, + "2": { + "IC": 17, + "ARD": [ + "D0", + "A0" + ] + }, + "3": { + "NC": null + }, + "4": { + "IC": 11, + "ARD": "D1" + }, + "5": { + "IC": 15, + "ARD": "D2" + }, + "6": { + "IC": 16, + "ARD": "D3" + }, + "7": { + "IC": 22, + "ARD": "D4" + }, + "8": { + "PWR": 3.3 + }, + "9": { + "GND": null + }, + "10": { + "IC": 23, + "ARD": "D5" + }, + "11": { + "IC": 29, + "ARD": "D6" + }, + "12": { + "IC": 28, + "ARD": "D7" + }, + "13": { + "IC": 25, + "ARD": "D8" + }, + "14": { + "IC": 24, + "ARD": "D9" + }, + "15": { + "IC": 26, + "ARD": "D10" + }, + "16": { + "IC": 27, + "ARD": "D11" + }, + "17": { + "IC": 17, + "ARD": [ + "D0", + "A0" + ] + }, + "18": { + "IC": 18, + "ARD": "D12" + }, + "19": { + "IC": 19, + "ARD": "D13" + }, + "20": { + "IC": 20, + "ARD": "D14" + }, + "21": { + "NC": null + }, + "22": { + "NC": null + } + } + } +} diff --git a/boards/wb2s.json b/boards/wb2s.json new file mode 100644 index 0000000..5522857 --- /dev/null +++ b/boards/wb2s.json @@ -0,0 +1,20 @@ +{ + "_base": [ + "beken-72xx", + "beken-7231t", + "beken-7231t-tuya", + "pcb/ic-bk7231-qfn32", + "pcb/wb2s", + "pcb/wb2s-test" + ], + "build": { + "mcu": "bk7231t", + "variant": "wb2s" + }, + "name": "WB2S Wi-Fi Module", + "url": "https://developer.tuya.com/en/docs/iot/wb2s-module-datasheet?id=K9ghecl7kc479", + "vendor": "Tuya Inc.", + "pcb": { + "symbol": "WB2S" + } +} diff --git a/boards/wb2s/README.md b/boards/wb2s/README.md new file mode 100644 index 0000000..765d427 --- /dev/null +++ b/boards/wb2s/README.md @@ -0,0 +1,64 @@ +# WB2S Wi-Fi Module + +*by Tuya Inc.* + +[Product page](https://developer.tuya.com/en/docs/iot/wb2s-module-datasheet?id=K9ghecl7kc479) + +- [General info](../../docs/platform/beken-72xx/README.md) +- [Flashing guide](../../docs/platform/beken-72xx/flashing.md) +- [BkWriter v1.6.0](https://images.tuyacn.com/smart/bk_writer1.60/bk_writer1.60.exe) + +Parameter | Value +-------------|---------------------------------- +MCU | BK7231T +Manufacturer | Beken +Series | BK72XX +Frequency | 120 MHz +Flash size | 2 MiB +RAM size | 256 KiB +Voltage | 3.0V - 3.6V +I/O | 14x GPIO, 6x PWM, 2x UART, 1x ADC +Wi-Fi | 802.11 b/g/n +Bluetooth | BLE v4.2 + +## Pinout + +![Pinout](pinout_wb2s.svg) + +## Arduino Core pin mapping + +No. | Pin | UART | I²C | SPI | PWM | Other +----|-----------|----------|----------|-----|------|------ +D0 | P8 | | | | PWM2 | +D1 | P7 | | | | PWM1 | +D2 | P6 | | | | PWM0 | +D3 | P23 | | | | | TDO +D4 | P10 | UART1_RX | | | | +D5 | P11 | UART1_TX | | | | +D6 | P24 | | | | PWM4 | +D7 | P26 | | | | PWM5 | +D8 | P20 | | I2C1_SCL | | | TCK +D9 | P9 | | | | PWM3 | +D10 | P1 | UART2_RX | I2C2_SDA | | | +D11 | P0 | UART2_TX | I2C2_SCL | | | +D12 | P21 | | I2C1_SDA | | | TMS +D13 | P22 | | | | | TDI +A0 | P23, ADC3 | | | | | + +## Flash memory map + +Flash size: 2 MiB / 2,097,152 B / 0x200000 + +Hex values are in bytes. + +Name | Start | Length | End +----------------|----------|--------------------|--------- +Bootloader | 0x000000 | 68 KiB / 0x11000 | 0x011000 +App Image | 0x011000 | 1.1 MiB / 0x121000 | 0x132000 +OTA Image | 0x132000 | 664 KiB / 0xA6000 | 0x1D8000 +Key-Value Store | 0x1D8000 | 32 KiB / 0x8000 | 0x1E0000 +TLV Store | 0x1E0000 | 4 KiB / 0x1000 | 0x1E1000 +Network Data | 0x1E1000 | 8 KiB / 0x2000 | 0x1E3000 +User Data | 0x1E3000 | 116 KiB / 0x1D000 | 0x200000 + +Bootloader and app partitions contain CRC16 sums every 32 bytes. That results in the actual flash offsets/sizes not aligned to sector boundaries. To simplify calculations, the values shown in the table (extracted from bootloader's partition table) were aligned to 4096 bytes. diff --git a/boards/wb2s/pinout_wb2s.svg b/boards/wb2s/pinout_wb2s.svg new file mode 100644 index 0000000..5ecf3d1 --- /dev/null +++ b/boards/wb2s/pinout_wb2s.svg @@ -0,0 +1,391 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + WB2S + + + + + + + + + + + + + + + + + + + + + + P8 + + + + D0 + + + + PWM2 + + + + + P7 + + + + D1 + + + + PWM1 + + + + + P6 + + + + D2 + + + + PWM0 + + + + + P23 + + + + ADC3 + + + + D3 + + + + A0 + + + + TDO + + + + + CEN + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + 3V3 + + + + + GND + + + + + P10 + + + + D4 + + + + RX1 + + + + + P11 + + + + D5 + + + + TX1 + + + + + P24 + + + + D6 + + + + PWM4 + + + + + P26 + + + + D7 + + + + IRDA + + + + PWM5 + + + + + P20 + + + + D8 + + + + SCL1 + + + + TCK + + + + + P9 + + + + D9 + + + + PWM3 + + + + + P1 + + + + D10 + + + + RX2 + + + + SDA2 + + + + + P0 + + + + D11 + + + + TX2 + + + + SCL2 + + + + + P21 + + + + D12 + + + + SDA1 + + + + TMS + + + + + P22 + + + + D13 + + + + TDI + + + + + P23 + + + + ADC3 + + + + D3 + + + + A0 + + + + TDO + + + + + ___ + RST + + + + + 3V3 + + + + + GND + diff --git a/boards/wb2s/pins_arduino.h b/boards/wb2s/pins_arduino.h new file mode 100644 index 0000000..1de3ade --- /dev/null +++ b/boards/wb2s/pins_arduino.h @@ -0,0 +1 @@ +#include "variant.h" diff --git a/boards/wb2s/variant.cpp b/boards/wb2s/variant.cpp new file mode 100644 index 0000000..d0d6bc3 --- /dev/null +++ b/boards/wb2s/variant.cpp @@ -0,0 +1,40 @@ +/* This file was auto-generated from wb2s.json using boardgen */ + +#include + +extern "C" { + +// clang-format off +PinInfo pinTable[PINS_COUNT] = { + // D0: P8, PWM2 + {GPIO8, PIN_GPIO | PIN_IRQ | PIN_PWM, PIN_NONE, 0}, + // D1: P7, PWM1 + {GPIO7, PIN_GPIO | PIN_IRQ | PIN_PWM, PIN_NONE, 0}, + // D2: P6, PWM0 + {GPIO6, PIN_GPIO | PIN_IRQ | PIN_PWM, PIN_NONE, 0}, + // D3: P23, ADC3, TDO, FSO + {GPIO23, PIN_GPIO | PIN_IRQ | PIN_ADC | PIN_JTAG, PIN_NONE, 0}, + // D4: P10, UART1_RX + {GPIO10, PIN_GPIO | PIN_IRQ | PIN_UART, PIN_NONE, 0}, + // D5: P11, UART1_TX + {GPIO11, PIN_GPIO | PIN_IRQ | PIN_UART, PIN_NONE, 0}, + // D6: P24, PWM4 + {GPIO24, PIN_GPIO | PIN_IRQ | PIN_PWM, PIN_NONE, 0}, + // D7: P26, PWM5, IRDA + {GPIO26, PIN_GPIO | PIN_IRQ | PIN_PWM, PIN_NONE, 0}, + // D8: P20, I2C1_SCL, TCK, FSCK + {GPIO20, PIN_GPIO | PIN_IRQ | PIN_I2C | PIN_JTAG, PIN_NONE, 0}, + // D9: P9, PWM3 + {GPIO9, PIN_GPIO | PIN_IRQ | PIN_PWM, PIN_NONE, 0}, + // D10: P1, UART2_RX, I2C2_SDA + {GPIO1, PIN_GPIO | PIN_IRQ | PIN_I2C | PIN_UART, PIN_NONE, 0}, + // D11: P0, UART2_TX, I2C2_SCL + {GPIO0, PIN_GPIO | PIN_IRQ | PIN_I2C | PIN_UART, PIN_NONE, 0}, + // D12: P21, I2C1_SDA, TMS, MCLK, ^FCS + {GPIO21, PIN_GPIO | PIN_IRQ | PIN_I2C | PIN_I2S | PIN_JTAG, PIN_NONE, 0}, + // D13: P22, TDI, FSI + {GPIO22, PIN_GPIO | PIN_IRQ | PIN_JTAG, PIN_NONE, 0}, +}; +// clang-format on + +} // extern "C" diff --git a/boards/wb2s/variant.h b/boards/wb2s/variant.h new file mode 100644 index 0000000..0efe8d0 --- /dev/null +++ b/boards/wb2s/variant.h @@ -0,0 +1,41 @@ +/* This file was auto-generated from wb2s.json using boardgen */ + +#pragma once + +#include + +// clang-format off + +// Pins +// ---- +#define PINS_COUNT 14 +#define NUM_DIGITAL_PINS 14 +#define NUM_ANALOG_INPUTS 1 +#define NUM_ANALOG_OUTPUTS 0 + +// Analog pins +// ----------- +#define PIN_A0 3u // GPIO23 +#define PIN_A0 3u // GPIO23 +#define A0 PIN_A0 +#define A0 PIN_A0 + +// SPI Interfaces +// -------------- +#define SPI_INTERFACES_COUNT 0 + +// Wire Interfaces +// --------------- +#define WIRE_INTERFACES_COUNT 2 +#define PIN_WIRE1_SCL 8u // GPIO20 +#define PIN_WIRE1_SDA 12u // GPIO21 +#define PIN_WIRE2_SCL 11u // GPIO0 +#define PIN_WIRE2_SDA 10u // GPIO1 + +// Serial ports +// ------------ +#define SERIAL_INTERFACES_COUNT 2 +#define PIN_SERIAL1_RX 4u // GPIO10 +#define PIN_SERIAL1_TX 5u // GPIO11 +#define PIN_SERIAL2_RX 10u // GPIO1 +#define PIN_SERIAL2_TX 11u // GPIO0 diff --git a/boards/wb3l.json b/boards/wb3l.json new file mode 100644 index 0000000..62d92b2 --- /dev/null +++ b/boards/wb3l.json @@ -0,0 +1,19 @@ +{ + "_base": [ + "beken-72xx", + "beken-7231t", + "beken-7231t-tuya", + "pcb/ic-bk7231-qfn32", + "pcb/wb3l" + ], + "build": { + "mcu": "bk7231t", + "variant": "wb3l" + }, + "name": "WB3L Wi-Fi Module", + "url": "https://developer.tuya.com/en/docs/iot/wb3l-module-datasheet?id=K9duiggw2v8sp", + "vendor": "Tuya Inc.", + "pcb": { + "symbol": "WB3L" + } +} diff --git a/boards/wb3l/README.md b/boards/wb3l/README.md new file mode 100644 index 0000000..eddd905 --- /dev/null +++ b/boards/wb3l/README.md @@ -0,0 +1,66 @@ +# WB3L Wi-Fi Module + +*by Tuya Inc.* + +[Product page](https://developer.tuya.com/en/docs/iot/wb3l-module-datasheet?id=K9duiggw2v8sp) + +- [General info](../../docs/platform/beken-72xx/README.md) +- [Flashing guide](../../docs/platform/beken-72xx/flashing.md) +- [BkWriter v1.6.0](https://images.tuyacn.com/smart/bk_writer1.60/bk_writer1.60.exe) + +Parameter | Value +-------------|---------------------------------- +MCU | BK7231T +Manufacturer | Beken +Series | BK72XX +Frequency | 120 MHz +Flash size | 2 MiB +RAM size | 256 KiB +Voltage | 3.0V - 3.6V +I/O | 16x GPIO, 6x PWM, 2x UART, 1x ADC +Wi-Fi | 802.11 b/g/n +Bluetooth | BLE v4.2 + +## Pinout + +![Pinout](pinout_wb3l.svg) + +## Arduino Core pin mapping + +No. | Pin | UART | I²C | SPI | PWM | Other +----|-----------|----------|----------|------|------|------ +D0 | P23 | | | | | TDO +D1 | P14 | | | SCK | | +D2 | P26 | | | | PWM5 | +D3 | P24 | | | | PWM4 | +D4 | P6 | | | | PWM0 | +D5 | P9 | | | | PWM3 | +D6 | P0 | UART2_TX | I2C2_SCL | | | +D7 | P16 | | | MOSI | | +D8 | P8 | | | | PWM2 | +D9 | P7 | | | | PWM1 | +D10 | P10 | UART1_RX | | | | +D11 | P11 | UART1_TX | | | | +D12 | P22 | | | | | TDI +D13 | P21 | | I2C1_SDA | | | TMS +D14 | P20 | | I2C1_SCL | | | TCK +D15 | P1 | UART2_RX | I2C2_SDA | | | +A0 | P23, ADC3 | | | | | + +## Flash memory map + +Flash size: 2 MiB / 2,097,152 B / 0x200000 + +Hex values are in bytes. + +Name | Start | Length | End +----------------|----------|--------------------|--------- +Bootloader | 0x000000 | 68 KiB / 0x11000 | 0x011000 +App Image | 0x011000 | 1.1 MiB / 0x121000 | 0x132000 +OTA Image | 0x132000 | 664 KiB / 0xA6000 | 0x1D8000 +Key-Value Store | 0x1D8000 | 32 KiB / 0x8000 | 0x1E0000 +TLV Store | 0x1E0000 | 4 KiB / 0x1000 | 0x1E1000 +Network Data | 0x1E1000 | 8 KiB / 0x2000 | 0x1E3000 +User Data | 0x1E3000 | 116 KiB / 0x1D000 | 0x200000 + +Bootloader and app partitions contain CRC16 sums every 32 bytes. That results in the actual flash offsets/sizes not aligned to sector boundaries. To simplify calculations, the values shown in the table (extracted from bootloader's partition table) were aligned to 4096 bytes. diff --git a/boards/wb3l/pinout_wb3l.svg b/boards/wb3l/pinout_wb3l.svg new file mode 100644 index 0000000..26cd9a6 --- /dev/null +++ b/boards/wb3l/pinout_wb3l.svg @@ -0,0 +1,372 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + WB3L + + + + + + + + + + + + + + + + + + P23 + + + + ADC3 + + + + D0 + + + + A0 + + + + TDO + + + + FSO + + + + + CEN + + + + + P14 + + + + D1 + + + + + P26 + + + + D2 + + + + IRDA + + + + PWM5 + + + + + P24 + + + + D3 + + + + PWM4 + + + + + P6 + + + + D4 + + + + PWM0 + + + + + 3V3 + + + + + GND + + + + + P9 + + + + D5 + + + + PWM3 + + + + + P0 + + + + D6 + + + + TX2 + + + + SCL2 + + + + + P16 + + + + D7 + + + + + P8 + + + + D8 + + + + PWM2 + + + + + P7 + + + + D9 + + + + PWM1 + + + + + P10 + + + + D10 + + + + RX1 + + + + + P11 + + + + D11 + + + + TX1 + + + + + P23 + + + + ADC3 + + + + D0 + + + + A0 + + + + TDO + + + + FSO + + + + + P22 + + + + D12 + + + + TDI + + + + FSI + + + + + P21 + + + + D13 + + + + SDA1 + + + + TMS + + + + ___ + FCS + + + + + P20 + + + + D14 + + + + SCL1 + + + + TCK + + + + FSCK + + + + + P1 + + + + D15 + + + + RX2 + + + + SDA2 + diff --git a/boards/wb3l/pins_arduino.h b/boards/wb3l/pins_arduino.h new file mode 100644 index 0000000..1de3ade --- /dev/null +++ b/boards/wb3l/pins_arduino.h @@ -0,0 +1 @@ +#include "variant.h" diff --git a/boards/wb3l/variant.cpp b/boards/wb3l/variant.cpp new file mode 100644 index 0000000..41ddfce --- /dev/null +++ b/boards/wb3l/variant.cpp @@ -0,0 +1,44 @@ +/* This file was auto-generated from wb3l.json using boardgen */ + +#include + +extern "C" { + +// clang-format off +PinInfo pinTable[PINS_COUNT] = { + // D0: P23, ADC3, TDO, FSO + {GPIO23, PIN_GPIO | PIN_IRQ | PIN_ADC | PIN_JTAG, PIN_NONE, 0}, + // D1: P14, SD_CLK, SCK + {GPIO14, PIN_GPIO | PIN_IRQ | PIN_SPI, PIN_NONE, 0}, + // D2: P26, PWM5, IRDA + {GPIO26, PIN_GPIO | PIN_IRQ | PIN_PWM, PIN_NONE, 0}, + // D3: P24, PWM4 + {GPIO24, PIN_GPIO | PIN_IRQ | PIN_PWM, PIN_NONE, 0}, + // D4: P6, PWM0 + {GPIO6, PIN_GPIO | PIN_IRQ | PIN_PWM, PIN_NONE, 0}, + // D5: P9, PWM3 + {GPIO9, PIN_GPIO | PIN_IRQ | PIN_PWM, PIN_NONE, 0}, + // D6: P0, UART2_TX, I2C2_SCL + {GPIO0, PIN_GPIO | PIN_IRQ | PIN_I2C | PIN_UART, PIN_NONE, 0}, + // D7: P16, SD_D0, MOSI + {GPIO16, PIN_GPIO | PIN_IRQ | PIN_SPI, PIN_NONE, 0}, + // D8: P8, PWM2 + {GPIO8, PIN_GPIO | PIN_IRQ | PIN_PWM, PIN_NONE, 0}, + // D9: P7, PWM1 + {GPIO7, PIN_GPIO | PIN_IRQ | PIN_PWM, PIN_NONE, 0}, + // D10: P10, UART1_RX + {GPIO10, PIN_GPIO | PIN_IRQ | PIN_UART, PIN_NONE, 0}, + // D11: P11, UART1_TX + {GPIO11, PIN_GPIO | PIN_IRQ | PIN_UART, PIN_NONE, 0}, + // D12: P22, TDI, FSI + {GPIO22, PIN_GPIO | PIN_IRQ | PIN_JTAG, PIN_NONE, 0}, + // D13: P21, I2C1_SDA, TMS, MCLK, ^FCS + {GPIO21, PIN_GPIO | PIN_IRQ | PIN_I2C | PIN_I2S | PIN_JTAG, PIN_NONE, 0}, + // D14: P20, I2C1_SCL, TCK, FSCK + {GPIO20, PIN_GPIO | PIN_IRQ | PIN_I2C | PIN_JTAG, PIN_NONE, 0}, + // D15: P1, UART2_RX, I2C2_SDA + {GPIO1, PIN_GPIO | PIN_IRQ | PIN_I2C | PIN_UART, PIN_NONE, 0}, +}; +// clang-format on + +} // extern "C" diff --git a/boards/wb3l/variant.h b/boards/wb3l/variant.h new file mode 100644 index 0000000..0b945a3 --- /dev/null +++ b/boards/wb3l/variant.h @@ -0,0 +1,41 @@ +/* This file was auto-generated from wb3l.json using boardgen */ + +#pragma once + +#include + +// clang-format off + +// Pins +// ---- +#define PINS_COUNT 16 +#define NUM_DIGITAL_PINS 16 +#define NUM_ANALOG_INPUTS 1 +#define NUM_ANALOG_OUTPUTS 0 + +// Analog pins +// ----------- +#define PIN_A0 0u // GPIO23 +#define PIN_A0 0u // GPIO23 +#define A0 PIN_A0 +#define A0 PIN_A0 + +// SPI Interfaces +// -------------- +#define SPI_INTERFACES_COUNT 0 + +// Wire Interfaces +// --------------- +#define WIRE_INTERFACES_COUNT 2 +#define PIN_WIRE1_SCL 14u // GPIO20 +#define PIN_WIRE1_SDA 13u // GPIO21 +#define PIN_WIRE2_SCL 6u // GPIO0 +#define PIN_WIRE2_SDA 15u // GPIO1 + +// Serial ports +// ------------ +#define SERIAL_INTERFACES_COUNT 2 +#define PIN_SERIAL1_RX 10u // GPIO10 +#define PIN_SERIAL1_TX 11u // GPIO11 +#define PIN_SERIAL2_RX 15u // GPIO1 +#define PIN_SERIAL2_TX 6u // GPIO0 diff --git a/boards/wb3s.json b/boards/wb3s.json new file mode 100644 index 0000000..61a91c0 --- /dev/null +++ b/boards/wb3s.json @@ -0,0 +1,19 @@ +{ + "_base": [ + "beken-72xx", + "beken-7231t", + "beken-7231t-tuya", + "pcb/ic-bk7231-qfn32", + "pcb/wb3s" + ], + "build": { + "mcu": "bk7231t", + "variant": "wb3s" + }, + "name": "WB3S Wi-Fi Module", + "url": "https://developer.tuya.com/en/docs/iot/wb3s-module-datasheet?id=K9dx20n6hz5n4", + "vendor": "Tuya Inc.", + "pcb": { + "symbol": "WB3S" + } +} diff --git a/boards/wb3s/README.md b/boards/wb3s/README.md new file mode 100644 index 0000000..b103cf6 --- /dev/null +++ b/boards/wb3s/README.md @@ -0,0 +1,65 @@ +# WB3S Wi-Fi Module + +*by Tuya Inc.* + +[Product page](https://developer.tuya.com/en/docs/iot/wb3s-module-datasheet?id=K9dx20n6hz5n4) + +- [General info](../../docs/platform/beken-72xx/README.md) +- [Flashing guide](../../docs/platform/beken-72xx/flashing.md) +- [BkWriter v1.6.0](https://images.tuyacn.com/smart/bk_writer1.60/bk_writer1.60.exe) + +Parameter | Value +-------------|---------------------------------- +MCU | BK7231T +Manufacturer | Beken +Series | BK72XX +Frequency | 120 MHz +Flash size | 2 MiB +RAM size | 256 KiB +Voltage | 3.0V - 3.6V +I/O | 15x GPIO, 6x PWM, 2x UART, 1x ADC +Wi-Fi | 802.11 b/g/n +Bluetooth | BLE v4.2 + +## Pinout + +![Pinout](pinout_wb3s.svg) + +## Arduino Core pin mapping + +No. | Pin | UART | I²C | SPI | PWM | Other +----|-----------|----------|----------|-----|------|------ +D0 | P23 | | | | | TDO +D1 | P14 | | | SCK | | +D2 | P26 | | | | PWM5 | +D3 | P24 | | | | PWM4 | +D4 | P6 | | | | PWM0 | +D5 | P7 | | | | PWM1 | +D6 | P0 | UART2_TX | I2C2_SCL | | | +D7 | P1 | UART2_RX | I2C2_SDA | | | +D8 | P9 | | | | PWM3 | +D9 | P8 | | | | PWM2 | +D10 | P10 | UART1_RX | | | | +D11 | P11 | UART1_TX | | | | +D12 | P22 | | | | | TDI +D13 | P21 | | I2C1_SDA | | | TMS +D14 | P20 | | I2C1_SCL | | | TCK +A0 | P23, ADC3 | | | | | + +## Flash memory map + +Flash size: 2 MiB / 2,097,152 B / 0x200000 + +Hex values are in bytes. + +Name | Start | Length | End +----------------|----------|--------------------|--------- +Bootloader | 0x000000 | 68 KiB / 0x11000 | 0x011000 +App Image | 0x011000 | 1.1 MiB / 0x121000 | 0x132000 +OTA Image | 0x132000 | 664 KiB / 0xA6000 | 0x1D8000 +Key-Value Store | 0x1D8000 | 32 KiB / 0x8000 | 0x1E0000 +TLV Store | 0x1E0000 | 4 KiB / 0x1000 | 0x1E1000 +Network Data | 0x1E1000 | 8 KiB / 0x2000 | 0x1E3000 +User Data | 0x1E3000 | 116 KiB / 0x1D000 | 0x200000 + +Bootloader and app partitions contain CRC16 sums every 32 bytes. That results in the actual flash offsets/sizes not aligned to sector boundaries. To simplify calculations, the values shown in the table (extracted from bootloader's partition table) were aligned to 4096 bytes. diff --git a/boards/wb3s/pinout_wb3s.svg b/boards/wb3s/pinout_wb3s.svg new file mode 100644 index 0000000..9533b88 --- /dev/null +++ b/boards/wb3s/pinout_wb3s.svg @@ -0,0 +1,370 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + WB3S + + + + + + + + + + + + + + + + + CEN + + + + + P23 + + + + ADC3 + + + + D0 + + + + A0 + + + + TDO + + + + FSO + + + + + + P14 + + + + D1 + + + + + P26 + + + + D2 + + + + IRDA + + + + PWM5 + + + + + P24 + + + + D3 + + + + PWM4 + + + + + P6 + + + + D4 + + + + PWM0 + + + + + 3V3 + + + + + GND + + + + + P7 + + + + D5 + + + + PWM1 + + + + + P0 + + + + D6 + + + + TX2 + + + + SCL2 + + + + + P1 + + + + D7 + + + + RX2 + + + + SDA2 + + + + + P9 + + + + D8 + + + + PWM3 + + + + + P8 + + + + D9 + + + + PWM2 + + + + + P10 + + + + D10 + + + + RX1 + + + + + P11 + + + + D11 + + + + TX1 + + + + + P23 + + + + ADC3 + + + + D0 + + + + A0 + + + + TDO + + + + FSO + + + + + P22 + + + + D12 + + + + TDI + + + + FSI + + + + + P21 + + + + D13 + + + + SDA1 + + + + TMS + + + + ___ + FCS + + + + + P20 + + + + D14 + + + + SCL1 + + + + TCK + + + + FSCK + + + diff --git a/boards/wb3s/pins_arduino.h b/boards/wb3s/pins_arduino.h new file mode 100644 index 0000000..1de3ade --- /dev/null +++ b/boards/wb3s/pins_arduino.h @@ -0,0 +1 @@ +#include "variant.h" diff --git a/boards/wb3s/variant.cpp b/boards/wb3s/variant.cpp new file mode 100644 index 0000000..3b4e22b --- /dev/null +++ b/boards/wb3s/variant.cpp @@ -0,0 +1,42 @@ +/* This file was auto-generated from wb3s.json using boardgen */ + +#include + +extern "C" { + +// clang-format off +PinInfo pinTable[PINS_COUNT] = { + // D0: P23, ADC3, TDO, FSO + {GPIO23, PIN_GPIO | PIN_IRQ | PIN_ADC | PIN_JTAG, PIN_NONE, 0}, + // D1: P14, SD_CLK, SCK + {GPIO14, PIN_GPIO | PIN_IRQ | PIN_SPI, PIN_NONE, 0}, + // D2: P26, PWM5, IRDA + {GPIO26, PIN_GPIO | PIN_IRQ | PIN_PWM, PIN_NONE, 0}, + // D3: P24, PWM4 + {GPIO24, PIN_GPIO | PIN_IRQ | PIN_PWM, PIN_NONE, 0}, + // D4: P6, PWM0 + {GPIO6, PIN_GPIO | PIN_IRQ | PIN_PWM, PIN_NONE, 0}, + // D5: P7, PWM1 + {GPIO7, PIN_GPIO | PIN_IRQ | PIN_PWM, PIN_NONE, 0}, + // D6: P0, UART2_TX, I2C2_SCL + {GPIO0, PIN_GPIO | PIN_IRQ | PIN_I2C | PIN_UART, PIN_NONE, 0}, + // D7: P1, UART2_RX, I2C2_SDA + {GPIO1, PIN_GPIO | PIN_IRQ | PIN_I2C | PIN_UART, PIN_NONE, 0}, + // D8: P9, PWM3 + {GPIO9, PIN_GPIO | PIN_IRQ | PIN_PWM, PIN_NONE, 0}, + // D9: P8, PWM2 + {GPIO8, PIN_GPIO | PIN_IRQ | PIN_PWM, PIN_NONE, 0}, + // D10: P10, UART1_RX + {GPIO10, PIN_GPIO | PIN_IRQ | PIN_UART, PIN_NONE, 0}, + // D11: P11, UART1_TX + {GPIO11, PIN_GPIO | PIN_IRQ | PIN_UART, PIN_NONE, 0}, + // D12: P22, TDI, FSI + {GPIO22, PIN_GPIO | PIN_IRQ | PIN_JTAG, PIN_NONE, 0}, + // D13: P21, I2C1_SDA, TMS, MCLK, ^FCS + {GPIO21, PIN_GPIO | PIN_IRQ | PIN_I2C | PIN_I2S | PIN_JTAG, PIN_NONE, 0}, + // D14: P20, I2C1_SCL, TCK, FSCK + {GPIO20, PIN_GPIO | PIN_IRQ | PIN_I2C | PIN_JTAG, PIN_NONE, 0}, +}; +// clang-format on + +} // extern "C" diff --git a/boards/wb3s/variant.h b/boards/wb3s/variant.h new file mode 100644 index 0000000..2fe27b3 --- /dev/null +++ b/boards/wb3s/variant.h @@ -0,0 +1,41 @@ +/* This file was auto-generated from wb3s.json using boardgen */ + +#pragma once + +#include + +// clang-format off + +// Pins +// ---- +#define PINS_COUNT 15 +#define NUM_DIGITAL_PINS 15 +#define NUM_ANALOG_INPUTS 1 +#define NUM_ANALOG_OUTPUTS 0 + +// Analog pins +// ----------- +#define PIN_A0 0u // GPIO23 +#define PIN_A0 0u // GPIO23 +#define A0 PIN_A0 +#define A0 PIN_A0 + +// SPI Interfaces +// -------------- +#define SPI_INTERFACES_COUNT 0 + +// Wire Interfaces +// --------------- +#define WIRE_INTERFACES_COUNT 2 +#define PIN_WIRE1_SCL 14u // GPIO20 +#define PIN_WIRE1_SDA 13u // GPIO21 +#define PIN_WIRE2_SCL 6u // GPIO0 +#define PIN_WIRE2_SDA 7u // GPIO1 + +// Serial ports +// ------------ +#define SERIAL_INTERFACES_COUNT 2 +#define PIN_SERIAL1_RX 10u // GPIO10 +#define PIN_SERIAL1_TX 11u // GPIO11 +#define PIN_SERIAL2_RX 7u // GPIO1 +#define PIN_SERIAL2_TX 6u // GPIO0 diff --git a/docs/supported_boards.md b/docs/supported_boards.md index 7fe23ae..6e21e11 100644 --- a/docs/supported_boards.md +++ b/docs/supported_boards.md @@ -7,6 +7,9 @@ Name | MCU | Flash | RAM | Pin **Tuya Inc.** | | | | | | | | [CB2S](../boards/cb2s/README.md) | BK7231N | 2 MiB | 256 KiB | 11 (8 I/O) | ✔️ | ✔️ | ❌ | `beken-7231n` [WB2L](../boards/wb2l/README.md) | BK7231T | 2 MiB | 256 KiB | 7 (5 I/O) | ✔️ | ✔️ | ❌ | `beken-7231t` +[WB2S](../boards/wb2s/README.md) | BK7231T | 2 MiB | 256 KiB | 11 (8 I/O) | ✔️ | ✔️ | ❌ | `beken-7231t` +[WB3L](../boards/wb3l/README.md) | BK7231T | 2 MiB | 256 KiB | 21 (17 I/O) | ✔️ | ✔️ | ❌ | `beken-7231t` +[WB3S](../boards/wb3s/README.md) | BK7231T | 2 MiB | 256 KiB | 22 (16 I/O) | ✔️ | ✔️ | ❌ | `beken-7231t` [WR2](../boards/wr2/README.md) | RTL8710BN | 2 MiB | 256 KiB | 11 (8 I/O) | ✔️ | ❌ | ❌ | `realtek-ambz` [WR2E](../boards/wr2e/README.md) | RTL8710BN | 2 MiB | 256 KiB | 11 (8 I/O) | ✔️ | ❌ | ❌ | `realtek-ambz` [WR3](../boards/wr3/README.md) | RTL8710BN | 2 MiB | 256 KiB | 16 (12 I/O) | ✔️ | ❌ | ❌ | `realtek-ambz` diff --git a/docs/unsupported_boards_tuya_all.md b/docs/unsupported_boards_tuya_all.md index c34bb45..735f966 100644 --- a/docs/unsupported_boards_tuya_all.md +++ b/docs/unsupported_boards_tuya_all.md @@ -19,9 +19,6 @@ CR2S | RTL8720CM | 4 MiB | 4 MiB | 11 | ✔️ | ✔️ | ❌ CR3L | RTL8720CM | 4 MiB | 4 MiB | 18 | ✔️ | ✔️ | ❌ **WB Series** | | | | | | | WB1S | BK7231T | 2 MiB | 256 KiB | 18 | ✔️ | ✔️ | ❌ -WB2S | BK7231T | 2 MiB | 256 KiB | 11 | ✔️ | ✔️ | ❌ -WB3L | BK7231T | 2 MiB | 256 KiB | 18 | ✔️ | ✔️ | ❌ -WB3S | BK7231T | 2 MiB | 256 KiB | 22 | ✔️ | ✔️ | ❌ WB8P | BK7231T | 2 MiB | 256 KiB | 10 | ✔️ | ✔️ | ❌ WBLC5 | BK7231T | 2 MiB | 256 KiB | 15 | ✔️ | ✔️ | ❌ WBLC9 | BK7231T | 2 MiB | 256 KiB | 8 | ✔️ | ✔️ | ❌ diff --git a/tools/boardgen b/tools/boardgen index cff42b3..76d89af 160000 --- a/tools/boardgen +++ b/tools/boardgen @@ -1 +1 @@ -Subproject commit cff42b3da821c191a5df307fb76e5fe04d2b704e +Subproject commit 76d89af332a4eef56cd181e9df0c79548aad77ba