esphome:
  name: m5stick-c
  platform: ESP32
  board: m5stick-c
  platformio_options:
    upload_speed: 115200

  # Use this to hardlink the component if it is not discovered
  # includes:
  #  - /config/custom_components/axp192/axp192.h

wifi:
  ssid: "SSID"
  password: "PASSPHRASE"

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "XXX"
    password: "XXX"

# Enable logging
logger:

substitutions:
  devicename: m5stick
  upper_devicename: M5StickC

captive_portal:

api:

ota:

web_server:

binary_sensor:

  - platform: gpio
    pin:
      number: GPIO37
      inverted: true
    name: ${upper_devicename} Button A
    on_press:
      then:
        - light.turn_on: led1
    on_release:
      then:
        - light.turn_off: led1
        
  - platform: gpio
    pin:
      number: GPIO39
      inverted: true
    name: ${upper_devicename} Button B
    on_press:
      then:
        - light.turn_on: led1
    on_release:
      then:
        - light.turn_off: led1

# AXP192 power management - must be present to initialize TFT power on
sensor:
  - platform: axp192
    model: M5STICKC
    address: 0x34
    i2c_id: bus_a
    update_interval: 30s
    battery_level:
      name: "M5Stick Battery Level"
      id: "m5stick_batterylevel"

  - platform: wifi_signal
    name: ${upper_devicename} WiFi Signal
    id: wifi_dbm
  - platform: uptime
    name: ${upper_devicename} Uptime

# internal LED
light:
  - platform: monochromatic
    output:  builtin_led
    name: ${upper_devicename} Led
    id: led1

output:
  - platform: ledc
    pin: 10
    inverted: true
    id: builtin_led

#############################################
### Currently causes an error with compilation
##
# internal IR Transmitter 
# remote_transmitter:
#   - pin:
#       number: GPIO9
#     carrier_duty_percent: 50%
#     id: internal
##
###
#############################################
spi:
  clk_pin: GPIO13
  mosi_pin: GPIO15

i2c:
   - id: bus_a
     sda: GPIO21
     scl: GPIO22
     scan: True

font:
  - file: 'fonts/arial.ttf'
    id: font1
    size: 8

# builtin 80x160 TFT
display:
  - platform: st7735
    model: "INITR_MINI160X80"
    cs_pin: GPIO5
    dc_pin: GPIO23
    reset_pin: GPIO18
    rotation: 270
    device_width: 128
    device_height: 160
    col_start: 0
    row_start: 0
    eight_bit_color: true
    update_interval: 5s
    lambda: |-
      it.print(80, 0, id(font1), TextAlign::TOP_CENTER, "M5Stick Test");