* add DTK PIM-TB10-Z BIOS 2.39
* change Multitech PC-500/PC500+ KBC type to XTClone
* 1. add ISA RTC century field to support Multitech onboard RTC
2. hard-coded I/O port and IRQ for Multitech onboard RTC until
find a prorper way to obtain correct value from machine config
* Update machine_table.c
Rename Packard Bell motherboards to be in line with the actual board names, and not machine oem names, which aren't fully accurate.
* Update machine_table.c
Edited more models based on actual names: https://pb.retropc.se/
* Add the Sony Vaio PCV-130/150 as a selectable BIOS for the AN430TX
* Add Sony CDU-611 24x CD-ROM drive
This may not have been the drive included in the Vaio PCV-130/150 but is contemporary, is the correct speed and satisfies the vendor-locked CD-ROM driver on the recovery CD.
* Add the VLSI SuperCore and Wildcat chipsets
* Disable logging and minor cleanups
* Add the AST Bravo MS P/90 (Rattler)
* Add the AT&T Globalyst 620 (NCR 3248)
* Add the DEC Celebris 5xx
* Add the DFI G586VPM Rev C
* Add the Packard Bell PB600
* Fix southbridge PCI Command Register writes
* Block the Cyrix 6x86 on incompatible machines
* Rename the AT&T Globalyst 620 to include the names of the NCR counterparts
* Add the Zeos Pantera Wildcat
* Add RZ-1001 variant of the RZ-1000 PCI IDE controller and made the Zeos Pantera Wildcat use it
* Add the Micronics M54Si
* Update machine_table.c
* Re-add new machines to machine table
* Update machine inits to use new KBC device names
* Use correct machine init method as NVRAM init is done by the chipset code
* Use a Phoenix KBC for the AST Bravo since the BIOS calls command D5h to show the KBC revision
* Update KBC comments in machine table
* Update VLSI 59x chipset comments
* Update machine inits for new super I/O code
* Reorganize machines and update comments
* AST readout device actually has multiple indexed registers
* Implement the AST Bravo MS ECP DMA configuration
* Implement jumpered/hardwired ECP DMA for the remaining machines
* Fix ECP DMA on the AST Bravo MS
* Move the DEC Celebris to the Socket 4/5 category
* Implement SMI I/O port read, fixes APM init on AT&T, Micronics and Zeos machines
* Convert AST readout device to new logging system
* Update KBC init to new method
* Cleanups
* machine.h: Configuration added for ABit AB-LX6
* m_at_slot1.c: Configuration is almost there for ABit AB-LX6
* Congratulations! BIOS Selector for ABit AB-LX6 is complete.
* Initial implementation of the Yamaha YMF-71x (OPL3-SA2/3) audio controllers
* Give the Intel AN430TX its onboard YMF-715
* Forgotten change to snd_sb_dsp.c
* Disable logging, code cleanup
* Use 32K default SB DSP DMA buffer globally and remove the Yamaha subtype
* Hook up master volume control to the OPL3 as well
* Use custom CD audio filter to apply master volume
* Initial implementation of the OPL3-SA3 bass/treble controls
* Improve CD audio volume filter
* Implement the power management registers
* Move master volume recalc to its own function and update on register write
* Correct YMF-719 PnP ROM filename
* Cleanup
1. Changed the names for two Chaintech machines (for example, 333AXB and 416SX)
2. Added the "AB" name to ABIT machines
3. Removed the space from PCChips and PCPartner names
4. BIOS name related corrections
5. Make few machines use their latest revisions as default BIOS option
