PCIREG -s [-d]
∟ Display all devices on the PCI bus. Specify -d to dump registers as well.

PCIREG -t [-8]
∟ Display BIOS IRQ steering table. Specify -8 to display as 86Box code.
  (Not available in UEFI version)

PCIREG -i [bus] device [function]
∟ Show information about the specified device.

PCIREG -r [bus] device [function] register
∟ Read the specified register.

PCIREG -w [bus] device [function] register value
∟ Write byte, word or dword to the specified register.

PCIREG {-d|-dw|-dl} [bus] device [function [register]]
∟ Dump registers as bytes (-d), words (-dw) or dwords (-dl). Optionally
  specify the register to start from (requires bus to be specified as well).

All numeric parameters should be specified in hexadecimal (without 0x prefix).
{bus device function register} can be substituted for a single port CF8h dword.
Register dumps are saved to PCIbbddf.BIN where bb=bus, dd=device, f=function.

Building

DOS target

Windows: Run wmake from an OpenWatcom "Build Environment" command prompt.
Linux: Run wmake with OpenWatcom tools present in $PATH.

UEFI target

Linux: Run make -f Makefile.uefi ARCH=x86_64 with a GCC toolchain installed.
- Note that 32-bit UEFI targets are not supported yet.

PCI ID database

Run python3 pciids.py to update the PCIIDS.BIN file.
- The latest version of pci.ids is automatically downloaded and used to update the database.