From a88c54b53a1f68b1e6fa7c52c6058388dc02afeb Mon Sep 17 00:00:00 2001 From: RichardG867 Date: Sun, 24 Aug 2025 18:17:00 -0300 Subject: [PATCH] 5.0 ports update --- settings/peripherals.rst | 1 - settings/ports.rst | 7 ++++++- 2 files changed, 6 insertions(+), 2 deletions(-) diff --git a/settings/peripherals.rst b/settings/peripherals.rst index fcfdb16..0c34fb7 100644 --- a/settings/peripherals.rst +++ b/settings/peripherals.rst @@ -5,7 +5,6 @@ The **Other peripherals** page contains settings related to disk drive controllers, memory expansions and other expansion cards. - ISA RTC ------- diff --git a/settings/ports.rst b/settings/ports.rst index 23ed1af..7f805da 100644 --- a/settings/ports.rst +++ b/settings/ports.rst @@ -5,6 +5,11 @@ The **Ports (COM & LPT)** page contains settings related to the emulated machine's I/O ports. +Internal LPT ECP DMA +-------------------- + +ISA DMA channel number to use for the on-board parallel port's Extended Capabilities Port mode. Only available on machines with physical DMA configuration jumpers for an on-board ECP-capable parallel port. + LPT1-4 Device ------------- @@ -30,7 +35,7 @@ Emulated device to connect to the given parallel (LPT) port. * Use the generic PostScript printer driver provided by your operating system. * Windows 95 and newer do not have a generic PostScript driver; use the **Apple LaserWriter IIf** driver for grayscale, or the **Apple Color LW 12/660 PS** driver for color. -* **PLIP Network:** A `Parallel Line Internet Protocol `_ cable connected to the :doc:`emulated network `. +* **Parallel Line Internet Protocol:** A `PLIP `_ cable connected to the :doc:`emulated network `. * The :ref:`emulated network adapter ` must also be set to **[LPT] PLIP**. * PLIP is compatible with the DOS ``plip.com`` packet driver and the Linux ``plip`` driver (only with interrupts enabled). It is not compatible with the Windows *Direct Cable Connection* feature or any other parallel port networking implementations.