diff --git a/hardware/ideterqua.rst b/hardware/ideterqua.rst index 74a266f..39967e8 100644 --- a/hardware/ideterqua.rst +++ b/hardware/ideterqua.rst @@ -16,7 +16,7 @@ The following resources are used by these additional controllers: |Quaternary|0168h |036Eh |10 | +----------+-------------+---------------+---+ -.. important:: **86Box 4.0.1:** The tertiary and quaternary I/O ports and IRQs were incorrectly switched in older 86Box versions; the table above applies to the corrected resources in 4.0.1. +.. note:: The tertiary and quaternary I/O ports and IRQs were incorrectly switched in 86Box versions prior to 4.0.1. Each controller's IRQ can be configured through its respective *Settings* button on :ref:`settings/storage:Tertiary / Quaternary IDE Controller`. The *Plug and Play* option on the *IRQ* box enables Plug and Play functionality, allowing a PnP compliant operating system to automatically set the controller's IRQ, while all other options set a static IRQ with no Plug and Play. diff --git a/settings/machine.rst b/settings/machine.rst index 6edf659..8af461b 100644 --- a/settings/machine.rst +++ b/settings/machine.rst @@ -12,7 +12,7 @@ Machine/motherboard model to emulate. The *Machine* box lists all available mode The *Configure* button opens a new window with settings specific to the machine, such as BIOS type selection. -.. note:: **86Box 4.0.1:** Settings for the machine's onboard devices have been moved to the *Configure* buttons at the devices' respective locations; for instance, configuring the amount of installed video memory for an onboard video chip is now done through the *Configure* button next to the :ref:`Display page's Video box ` when the *Internal* option is selected there. +.. note:: Settings for the machine's onboard devices have been moved to the *Configure* buttons at the devices' respective locations; for instance, configuring the amount of installed video memory for an onboard video chip is now done through the *Configure* button next to the :ref:`Display page's Video box ` when the *Internal* option is selected there. CPU type / Speed ----------------