From 2b78451532009906f133d433431f3671ef2aa717 Mon Sep 17 00:00:00 2001 From: RichardG867 Date: Mon, 31 Mar 2025 00:00:01 -0300 Subject: [PATCH] Reworked network settings page --- settings/network.rst | 21 ++++++++++----------- 1 file changed, 10 insertions(+), 11 deletions(-) diff --git a/settings/network.rst b/settings/network.rst index afbc85a..d2a32b5 100644 --- a/settings/network.rst +++ b/settings/network.rst @@ -20,14 +20,12 @@ Network emulation mode to use on this card. See :doc:`../hardware/network` for m * **SLiRP:** creates a private network with a virtual router. Similar to the **NAT** mode on other emulators and virtualizers. * **VDE:** attaches to a virtual switch created by :ref:`hardware/network:VDE`. Only available on Linux and macOS hosts. -Interface -^^^^^^^^^ +.. note:: + If PCap mode is not listed, make sure that: -Host network adapter to use for PCap mode on this card. If no adapters appear on this list, make sure that: - -* A WinPcap-compatible driver is installed; -* The installed driver is compatible with your version of Windows; -* At least one compatible (wired) network adapter is present. + * A WinPcap-compatible driver is installed; + * The installed driver is compatible with your version of Windows; + * At least one compatible (wired) network adapter is present. Adapter ^^^^^^^ @@ -41,9 +39,10 @@ The *Configure* button opens a new window with settings specific to the selected * The **[LPT] Parallel Port Internet Protocol** network adapter requires a **PLIP Network** device to be attached to a :ref:`parallel port `. * Settings for the **[COM] Standard Hayes-compliant Modem** are described on :ref:`Networking `. -VDE Socket -^^^^^^^^^^ +Options +^^^^^^^ -The socket name specified when creating the VDE virtual switch. Only used in **VDE** mode. +Settings for the network emulation mode selected above. Only settings relevant to the selected mode will be shown. -See the :ref:`VDE setup guide ` for more information. +* **Interface:** host network adapter to use in **PCap** mode. +* **VDE Socket:** virtual switch socket path to use in **VDE** mode. See the :ref:`VDE setup guide ` for more information.