jdillenburg-esphome/trash/bed-controller.yaml

esphome:
  name: bed-controller
  friendly_name: Bed Controller

esp32:
  board: esp32-c3-devkitm-1
  framework:
    type: arduino

# Enable logging
logger:

# Enable Home Assistant API
api:
  encryption:
    key: "uyMwFllQp/7nzMdnRhAqybJymJ/IjqIl+yf1QtDEw/s="

ota:
  password: "db4d5c0eeda9ef797ebbfbaa2b397720"

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "Bed-Controller Fallback Hotspot"
    password: "vHlYMuWAHvnp"

captive_portal:

# Sync time with Home Assistant.
time:
  - platform: homeassistant
    id: homeassistant_time

# Text sensors with general information.
text_sensor:
  # Expose ESPHome version as sensor.
  - platform: version
    name: ESPHome Version
  # Expose WiFi information as sensors.
  - platform: wifi_info
    ip_address:
      name: IP
    ssid:
      name: SSID
    bssid:
      name: BSSID

switch:
  - platform: restart
    name: "Restart"

globals:
  - id: min_speed
    type: float
    restore_value: False
    initial_value: '10'
  - id: motor_speed
    type: float
    restore_value: False
    initial_value: id(min_speed)
  - id: num_speeds
    type: int
    restore_value: False
    initial_value: '4'

output:
  - platform: ledc
    pin: GPIO32
    id: motor_forward_pin
  - platform: ledc
    pin: GPIO33
    id: motor_reverse_pin
  - platform: ledc
    pin: GPIO25
    id: motor_enable


fan:
  - platform: hbridge
    id: bed_motor
    name: "Bed Motor"
    pin_a: motor_forward_pin
    pin_b: motor_reverse_pin
    enable_pin: motor_enable
    # enable_pin: motor_enable
    decay_mode: slow

number:
  - platform: template
    name: Lower limit (meters)
    id: bed_lower_limit
    icon: "mdi:cogs"
    optimistic: true
    restore_value: true   # If you don't want to store the setting at ESP, set it to false.
    initial_value: "0.04" # Default bed_lower_limit Setting
    min_value: 0.0
    max_value: 2.0
    step: 0.01
    on_value: 
      then:
        - script.execute: start_motor_if_needed
  - platform: template
    name: Upper limit (meters)
    id: bed_upper_limit
    icon: "mdi:cogs"
    optimistic: true
    restore_value: true  # If you don't want to store the setting at ESP, set it to false.
    initial_value: "0.9" # Default bed_upper_limit Setting
    min_value: 0.0
    max_value: 2.0
    step: 0.01
    on_value: 
      then:
        - script.execute: start_motor_if_needed
  - platform: template
    name: Accuracy
    id: accuracy
    icon: "mdi:cogs"
    optimistic: true
    restore_value: true  # If you don't want to store the setting at ESP, set it to false.
    initial_value: "2.0" # Default accuracy Setting 2%
    min_value: 0.0
    max_value: 100.0
    step: 1.0
    on_value: 
      then:
        - script.execute: start_motor_if_needed
  - platform: template
    name: Desired percentage
    id: bed_desired_position
    icon: "mdi:cogs"
    optimistic: true
    restore_value: true   # If you don't want to store the setting at ESP, set it to false.
    initial_value: "0.0"  # Default desired position Setting
    min_value: 0.0
    max_value: 100.0
    step: 1.0
    unit_of_measurement: percentage
    on_value: 
      then:
        - script.execute: start_motor_if_needed

sensor:
  - platform: ultrasonic
    trigger_pin: GPIO27
    echo_pin: GPIO14
    name: "Bed Position"
    update_interval: 0.1s
    id: bed_position
    accuracy_decimals: 0
    unit_of_measurement: percentage
    filters:
      - filter_out: nan    
      - sliding_window_moving_average:
          window_size: 10
          send_every: 10
      - lambda: return 100.0 * (x - id(bed_lower_limit).state) / ( id(bed_upper_limit).state - id(bed_lower_limit).state );
    on_value:
      then:
        - script.execute: start_motor_if_needed

script:
  - id: calc_motor_speed
    then:
      - lambda: |-
          float diff = abs(id(bed_desired_position).state - id(bed_position).state);
          float speed_size = 100.0 / id(num_speeds);
          if (diff > 20) {
            id(motor_speed) = 100.0;
          }
          else if (diff > 10 && id(num_speeds) > 1) {
            id(motor_speed) = speed_size * 2;
          }
          else {
            id(motor_speed) = speed_size;
          }
  - id: start_motor_if_needed
    then:
      - script.execute: calc_motor_speed
      - if:
          condition:
            lambda: 'return id(bed_position).state < -id(accuracy).state;'
          then:
            - logger.log: 'bed lower then lower limit!'
            - fan.turn_on:
                id: bed_motor
                direction: FORWARD
                speed:
                  !lambda |-
                    return id(motor_speed);
          else:
            - if:
                condition:
                  lambda: 'return id(bed_position).state > 100.0 + id(accuracy).state;'
                then:
                  - logger.log: 'bed higher than high limit!'
                  - fan.turn_on:
                      id: bed_motor
                      direction: REVERSE
                      speed: 
                        !lambda |-
                          return id(motor_speed);
                else:
                  - if: 
                      condition: 
                        - lambda: 'return id(bed_position).state < id(bed_desired_position).state - id(accuracy).state;'
                      then:
                        - logger.log: 'bed lower than desired, moving up'
                        - fan.turn_on: 
                            id: bed_motor
                            direction: FORWARD
                            speed: 
                              !lambda |-
                                return id(motor_speed);
                      else:
                        - if:
                            condition:
                              - lambda: 'return id(bed_position).state > id(bed_desired_position).state + id(accuracy).state;'
                            then:
                              - logger.log: 'bed higher than desired, moving down'
                              - fan.turn_on:
                                  id: bed_motor
                                  direction: REVERSE
                                  speed:
                                    !lambda |-
                                      return id(motor_speed);
                            else:
                              - fan.turn_off: bed_motor