garage-door-controller adds "Car parked", "Car exiting" and "Car entering" sensors. Package for LD1125H motion sensor uses ${device_name} from source yaml file.

garage-door-controller.yaml

@@ -36,6 +36,9 @@ globals:
   - id: effect_counter 
     type: int
     initial_value: '0'
+  - id: safe_zone
+    type: bool
+    initial_value: 'false'
 
 # Garage door button on GPIO16
 switch:
@@ -106,6 +109,23 @@ binary_sensor:
     pin: GPIO23
     id: closed_sensor
     internal: True
+  - platform: template
+    id: parked_sensor
+    name: "Car parked"
+  - platform: template
+    id: car_exiting
+    name: "Car exiting"
+    condition:
+      sensor.in_range:
+        id: vehicle_average_speed
+        above: 1.0
+  - platform: template
+    id: car_entering
+    name: "Car entering"
+    condition:
+      sensor.in_range:
+        id: vehicle_average_speed
+        below: -1.0 
 
 #******************** Sensor *********************
 sensor:
@@ -198,8 +218,8 @@ sensor:
       return rate;
     filters:
       - sliding_window_moving_average: 
-          window_size: 20 # average 10 seconds worth of speed
+          window_size: 10 # average 10 x 0.5 seconds = 5 seconds worth of speed
-          send_every: 1   # check average speed every 1/2 second
+          send_every: 1   # send average speed every 1/2 second
     on_value: 
       then:
         - if:
@@ -223,6 +243,9 @@ sensor:
                     - light.turn_on: 
                         id: led_strip
                         effect: "Distance Effect"
+                    - binary_sensor.template.publish:
+                        id: parked_sensor
+                        state: false
 
 #******************** Cover *********************
 cover:
@@ -282,6 +305,7 @@ light:
             // solid red in safe zone
             if (distance < max_safe) {
               it.all() = Color(255,0,0);
+              id(safe_zone) = true;
               return;
             }
 
@@ -331,3 +355,10 @@ script:
           id: led_strip
           transition_length:
             seconds: 5
+      - if:
+          condition:
+            - lambda: 'return id(safe_zone);'
+          then:
+            - binary_sensor.template.publish:
+                id: parked_sensor
+                state: true

packages/beacon.yaml

@@ -16,13 +16,3 @@ bluetooth_proxy:
 
 esp32_ble_tracker:
 
-# MQTT config - required for this component to work:
-# mqtt:
-#   broker: 10.0.0.215
-#   username: esp32_presence
-#   password: findme
-#   discovery_prefix: "homeassistant"
-#   port: 1883
-#   client_id: "${area}"
-#   keepalive: 
-#     minutes: 10

packages/ld1125h.yaml

@@ -96,7 +96,7 @@ interval:
 
 number:
   - platform: template
-    name: ${upper_devicename} LD1125H mth1 mov #mth1 mov is 0~2.8m motion detection threshold.
+    name: ${device_name} LD1125H mth1 mov #mth1 mov is 0~2.8m motion detection threshold.
     id: LD1125H_mth1_mov
     icon: "mdi:cogs"
     optimistic: true
@@ -113,7 +113,7 @@ number:
               std::string th1st = "mth1_mov=" + str_sprintf("%.0f",x) +"\r\n";
               return std::vector<uint8_t>(th1st.begin(), th1st.end());
   - platform: template
-    name: ${upper_devicename} LD1125H mth2 mov #mth2 mov is 2.8~8m motion detection threshold.
+    name: ${device_name} LD1125H mth2 mov #mth2 mov is 2.8~8m motion detection threshold.
     id: LD1125H_mth2_mov
     icon: "mdi:cogs"
     optimistic: true
@@ -130,7 +130,7 @@ number:
               std::string th2st = "mth2_mov=" + str_sprintf("%.0f",x) +"\r\n";
               return std::vector<uint8_t>(th2st.begin(), th2st.end());
   - platform: template
-    name: ${upper_devicename} LD1125H mth3 mov #mth3 mov is above 8m motion detection threshold.
+    name: ${device_name} LD1125H mth3 mov #mth3 mov is above 8m motion detection threshold.
     id: LD1125H_mth3_mov
     icon: "mdi:cogs"
     optimistic: true
@@ -147,7 +147,7 @@ number:
               std::string th3st = "mth3_mov=" + str_sprintf("%.0f",x) +"\r\n";
               return std::vector<uint8_t>(th3st.begin(), th3st.end());
   - platform: template
-    name: ${upper_devicename} LD1125H mth1 occ #mth1 occ is 0~2.8m detection threshold.
+    name: ${device_name} LD1125H mth1 occ #mth1 occ is 0~2.8m detection threshold.
     id: LD1125H_mth1_occ
     icon: "mdi:cogs"
     optimistic: true
@@ -164,7 +164,7 @@ number:
               std::string th1st = "mth1_occ=" + str_sprintf("%.0f",x) +"\r\n";
               return std::vector<uint8_t>(th1st.begin(), th1st.end());
   - platform: template
-    name: ${upper_devicename} LD1125H mth2 occ #mth2 occ is 2.8~8m detection threshold.
+    name: ${device_name} LD1125H mth2 occ #mth2 occ is 2.8~8m detection threshold.
     id: LD1125H_mth2_occ
     icon: "mdi:cogs"
     optimistic: true
@@ -181,7 +181,7 @@ number:
               std::string th2st = "mth2_occ=" + str_sprintf("%.0f",x) +"\r\n";
               return std::vector<uint8_t>(th2st.begin(), th2st.end());
   - platform: template
-    name: ${upper_devicename} LD1125H mth3 occ #mth3 occ is above 8m detection threshold.
+    name: ${device_name} LD1125H mth3 occ #mth3 occ is above 8m detection threshold.
     id: LD1125H_mth3_occ
     icon: "mdi:cogs"
     optimistic: true
@@ -198,7 +198,7 @@ number:
               std::string th3st = "mth3_occ=" + str_sprintf("%.0f",x) +"\r\n";
               return std::vector<uint8_t>(th3st.begin(), th3st.end());
   - platform: template
-    name: ${upper_devicename} LD1125H rmax #rmax is max detection distance.
+    name: ${device_name} LD1125H rmax #rmax is max detection distance.
     id: LD1125H_rmax
     icon: "mdi:cogs"
     optimistic: true
@@ -215,7 +215,7 @@ number:
               std::string rmaxst = "rmax=" + str_sprintf("%.1f",x) +"\r\n";
               return std::vector<uint8_t>(rmaxst.begin(), rmaxst.end());
   - platform: template
-    name: ${upper_devicename} LD1125H Clearence Time
+    name: ${device_name} LD1125H Clearence Time
     id: LD1125H_Clear_Time
     icon: "mdi:cogs"
     optimistic: true
@@ -225,7 +225,7 @@ number:
     max_value: 60
     step: 0.5
   - platform: template
-    name: ${upper_devicename} LD1125H Movement Time
+    name: ${device_name} LD1125H Movement Time
     id: LD1125H_Mov_Time
     icon: "mdi:cogs"
     optimistic: true
@@ -236,7 +236,7 @@ number:
     step: 0.5
 sensor:
   - platform: template
-    name: ${upper_devicename} LD1125H Distance
+    name: ${device_name} LD1125H Distance
     id: LD1125H_Distance
     icon: "mdi:signal-distance-variant"
     unit_of_measurement: "m"
@@ -249,7 +249,7 @@ sensor:
 text_sensor:
   - platform: serial
     uart_id: LD1125H_UART_BUS
-    name: ${upper_devicename} LD1125H UART Text
+    name: ${device_name} LD1125H UART Text
     id: LD1125H_UART_Text
     icon: "mdi:format-text"
     internal: True #If Don't Want to See UART Receive Data, Set To True
@@ -290,15 +290,15 @@ text_sensor:
           }
         }
   - platform: template
-    name: ${upper_devicename} LD1125H Occupancy Status
+    name: ${device_name} LD1125H Occupancy Status
     id: LD1125H_Occupancy
     icon: "mdi:motion-sensor"
 binary_sensor:
   - platform: template
-    name: ${upper_devicename} LD1125H Occupancy or Movement
+    name: ${device_name} LD1125H Occupancy or Movement
     id: LD1125H_MovOcc_Binary
     device_class: occupancy
   - platform: template
-    name: ${upper_devicename} LD1125H Movement
+    name: ${device_name} LD1125H Movement
     id: LD1125H_Mov_Binary
     device_class: motion