esphome-configs-dlitz/waveshare-esp32-s3-zero-btproxy.yaml

# Board: Waveshare ESP32-S3-Zero
# Chip: ESP32-S3FH4R2
# CPU speed: 240MHz
# Flash: 4MB
# PSRAM: 2MB, Quad, 80MHz

substitutions:
  name: "esp32-s3-zero-btproxy"
  friendly_name: "Bluetooth Proxy"
  room: ""
  device_description: "Waveshare ESP32-S3-Zero configured as Bluetooth proxy"
  project_name: "dlitz.waveshare-esp32-s3-zero-btproxy"
  project_version: "v0.0.1"
  sensor_update_interval: "10s"
  wifi_fast_connect: "false"
  ibeacon_minor_id: 0

dashboard_import:
  package_import_url: github://dlitz/esphome-configs-dlitz/waveshare-esp32-s3-zero-btproxy.yaml@${git_branch}

packages:
  - !include common/factory-reset.yaml
  - !include common/git-branch.yaml
  # - !include common/ota-update-password.yaml
  - !include common/restart.yaml
  - !include common/safe-mode.yaml
  - !include common/time.yaml
  - !include common/uptime-info.yaml
  - !include common/wifi-info.yaml

esphome:
  name: "${name}"
  friendly_name: "${friendly_name}"
  comment: "${device_description}"
  area: "${room}"
  name_add_mac_suffix: true
  project:
    name: "${project_name}"
    version: "${project_version}"

esp32:
  variant: esp32s3
  flash_size: 4MB
  cpu_frequency: 240MHz
  framework:
    type: esp-idf
    sdkconfig_options:
      CONFIG_MBEDTLS_SSL_PROTO_TLS1_3: "y"  # TLS1.3 support still isn't enabled by default in IDF 5.5.2
      CONFIG_MBEDTLS_DEFAULT_CERTIFICATE_BUNDLE: CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_CMN
      # CONFIG_LWIP_NETIF_LOOPBACK: "n"     # Apparently there's a bug causing the ICMPv6 Router Solicitation to go out over the loopback interface rather than wifi

psram:
  mode: quad
  speed: 80MHz

# Enable logging
logger:
  level: DEBUG

# Enable Home Assistant API with dynamic key
api:
  encryption:

ota:
  - platform: esphome
    id: ota_id
    password: !secret fallback_ota_password

wifi:
  # ssid: !secret wifi_ssid
  # password: !secret wifi_password
  # fast_connect: true
  fast_connect: "${wifi_fast_connect}"
  enable_btm: true
  enable_rrm: true

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    password: !secret fallback_ap_password

captive_portal:

network:
  enable_ipv6: true
  # min_ipv6_addr_count: 2

# esp32_ble_tracker:
#   scan_parameters:
#     active: false
#
# bluetooth_proxy:
#   active: true
#
# esp32_ble_beacon:
#   type: iBeacon
#   uuid: 'c3c4fcfa-de20-44d5-98e3-686f2dc47875'
#   major: 10159
#   minor: ${ibeacon_minor_id}
#   #measured_power: -51

binary_sensor:
  - platform: gpio
    name: "BOOT button"
    entity_category: diagnostic
    pin:
      number: GPIO0
      mode:
        input: true
        pullup: true
      inverted: true
      ignore_strapping_warning: true
    filters:
      - settle: 10ms
    on_multi_click:
      - timing:
        - ON for 5s to 10s
        then:
          - button.press: button_safe_mode
      - timing:
        - ON for at least 10s
        then:
          - button.press: button_factory_reset

light:
  - platform: esp32_rmt_led_strip
    id: rgb_led
    name: RGB LED
    #entity_category: config
    pin: GPIO21
    rgb_order: RGB
    chipset: WS2812
    num_leds: 1
    restore_mode: ALWAYS_ON
    initial_state:    # XXX This doesn't seem to work for some rason
      state: true
      red: 0%
      green: 100%
      blue: 0%
      brightness: 30%
    effects:
      - strobe:
      - strobe:
          name: Identify
          colors:
            - state: true
              brightness: 30%
              red: 0%
              green: 0%
              blue: 100%
              duration: 250ms
            - state: true
              brightness: 100%
              red: 0%
              green: 0%
              blue: 100%
              duration: 250ms
            - state: true
              brightness: 100%
              red: 0%
              green: 100%
              blue: 100%
              duration: 250ms
            - state: true
              brightness: 30%
              red: 0%
              green: 100%
              blue: 100%
              duration: 250ms

  - platform: status_led
    internal: true
    id: status_led_id
    output: status_led_output

output:
  - platform: template
    id: status_led_output
    type: binary
    write_action:
      - lambda: |-
          static int prev_state = -1;
          //ESP_LOGD("my_status", "prev_state: %d, state: %d, state size: %d", prev_state, (int)state, sizeof(state));
          if (prev_state <= 0 && state > 0) {
            prev_state = state;
            auto call = id(rgb_led).turn_on();
            call.set_brightness(0.30);
            call.set_rgb(1.0, 0.0, 0.0);    // red
            call.set_transition_length(0);
            call.set_publish(false);    // Don't spam the logs
            call.perform();
          } else if (prev_state > 0 && state == 0) {
            prev_state = state;
            auto call = id(rgb_led).make_call();
            call.from_light_color_values(id(rgb_led).remote_values);
            call.set_transition_length(0);
            call.set_publish(false);    // Don't spam the logs
            call.perform();
          }

switch:
  - platform: template
    name: Identify
    entity_category: config
    optimistic: true
    turn_on_action:
      - light.turn_on:
          id: rgb_led
          effect: Identify
      - logger.log:
          format: "identify ON"
          level: INFO
    turn_off_action:
      - light.turn_off:
          id: rgb_led
      - logger.log:
          format: "identify OFF"
          level: INFO

  - platform: template
    id: trig_warning
    name: Trigger warning
    entity_category: diagnostic
    disabled_by_default: true
    optimistic: true
    turn_on_action:
      - lambda: |-
          id(trig_warning).status_set_warning("foo");
    turn_off_action:
      - lambda: |-
          id(trig_warning).status_clear_warning();

  - platform: template
    id: trig_error
    name: Trigger error
    entity_category: diagnostic
    disabled_by_default: true
    optimistic: true
    turn_on_action:
      - lambda: |-
          id(trig_error).status_set_error("foo");
    turn_off_action:
      - lambda: |-
          id(trig_error).status_clear_error();

sensor:
  - platform: internal_temperature
    id: cpu_temperature
    name: "CPU Temperature"

  #- platform: template
  #  name: App state (uint8)
  #  lambda: |-
  #    return App.get_app_state();
  #  update_interval: 1s