# MAC address: ec:da:3b:c4:9f:7c
# Device: Shelly PM Mini Gen3
# References:
# - https://devices.esphome.io/devices/shelly-pm-mini-gen3/
# - https://kb.shelly.cloud/knowledge-base/shelly-pm-mini-gen3

substitutions:
  # calibration_voltage_reference: 15873.35944299     # esphome default
  calibration_voltage_reference: 14393.902006359718   # calibrated on device ec:da:3b:c4:9f:7c
  # calibration_current_reference: 251213.46469622    # esphome default
  calibration_current_reference: 245340.94214487978   # calibrated on device ec:da:3b:c4:9f:7c
  device_name: "Shelly PM Mini Gen3"
  line_frequency: 60Hz
  shelly_button_gpio_number: GPIO1
  shelly_ntc_temperature_pin: GPIO3
  update_interval: 5s

dashboard_import:
  package_import_url: github://dlitz/esphome-configs-dlitz/shelly-pm-mini-gen3.yaml@${git_branch}

packages:
  - !include common/esp-shelly-c38f.yaml    # TODO: Does this device have this SoC
  - !include common/cpu-temperature.yaml
  - !include common/factory-reset.yaml
  - !include common/flash-write-interval.yaml
  - !include common/git-branch.yaml
  - !include common/ota.yaml
  - !include common/ota-update-password.yaml
  - !include common/restart.yaml
  - !include common/safe-mode.yaml
  - !include common/shelly-button.yaml
  - !include common/shelly-ntc-temperature.yaml
  - !include common/time.yaml
  - !include common/uptime-info.yaml
  - !include common/wifi-info.yaml

esphome:
  name: "shelly-pm-mini-gen3"
  friendly_name: "shelly-pm-mini-gen3"
  comment: "Shelly PM Mini Gen3 - Smart wifi energy meter"
  name_add_mac_suffix: true
  project:
    name: "dlitz.shelly-pm-mini-gen3"
    version: "v0.0.0"
  min_version: 2025.11.3    # for ade7953 bugfix #12180

# Enable logging
logger:
  hardware_uart: uart0

# Enable Home Assistant API
api:
  encryption:

wifi:
  # ssid: !secret wifi_ssid
  # password: !secret wifi_password
  # fast_connect: true
  enable_btm: true
  enable_rrm: true
  min_auth_mode: WPA2

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    password: !secret default_ap_password

captive_portal:

network:
  enable_ipv6: true
  # min_ipv6_addr_count: 2

improv_serial:

esp32_improv:
  authorizer: shelly_button_id

esp32_ble_tracker:
  scan_parameters:
    active: false

bluetooth_proxy:
  active: false

light:
  - platform: status_led
    name: "Status LED"
    id: status_led_id
    disabled_by_default: true
    entity_category: diagnostic
    pin:
      number: GPIO0
      inverted: true

sensor:
  - platform: bl0942
    id: bl0942_id
    uart_id: bl0942_uart_id
    update_interval: ${update_interval}
    voltage_reference: ${calibration_voltage_reference}
    current_reference: ${calibration_current_reference}
    line_frequency: ${line_frequency}

    voltage:
      name: "Voltage"
      id: voltage
      icon: mdi:alpha-v-circle-outline
      device_class: voltage
      on_value:
        then:
          - component.update: apparent_power
    current:
      name: "Current"
      id: current
      icon: mdi:alpha-a-circle-outline
      device_class: current
      on_value:
        then:
          - component.update: apparent_power
    power:
      name: "Power"
      id: power
      icon: mdi:transmission-tower
      device_class: power
      state_class: measurement
      on_value:
        then:
          - component.update: power_factor
    energy:
      name: "Energy"
      id: energy
      icon: mdi:meter-electric
      device_class: energy
    frequency:
      name: "Frequency"
      id: line_frequency
      accuracy_decimals: 2
      icon: mdi:cosine-wave
      device_class: frequency
      state_class: measurement

  - platform: total_daily_energy
    id: daily_energy_consumed_id
    name: "Daily Energy Consumed"
    power_id: power
    icon: mdi:hours-24
    unit_of_measurement: "kWh"
    state_class: total_increasing
    device_class: energy
    accuracy_decimals: 3
    filters:
      - multiply: 0.001

  - platform: template
    id: apparent_power
    name: "Apparent Power"
    state_class: measurement
    device_class: apparent_power
    unit_of_measurement: "VA"
    update_interval: never
    lambda: |-
      return id(voltage).state * id(current).state;
    on_value:
      then:
        - component.update: power_factor
        - component.update: reactive_power

  - platform: template
    id: reactive_power
    name: "Reactive Power"
    state_class: measurement
    device_class: reactive_power
    unit_of_measurement: "var"
    update_interval: never
    lambda: |-
      return id(apparent_power).state * (1 - id(power_factor).state);

  - platform: template
    id: power_factor
    name: "Power Factor"
    state_class: measurement
    device_class: power_factor
    update_interval: never
    lambda: |-
      float r = id(power).state;
      float a = id(apparent_power).state;
      if (r == 0.0 && a == 0.0) {
        return 1.0;
      }
      return r / a;
    on_value:
      then:
        - component.update: reactive_power

uart:
  - id: bl0942_uart_id
    tx_pin: GPIO6
    rx_pin:
      number: GPIO7
      mode:
        pullup: true
        input: true
    baud_rate: 9600
    debug:
      direction: BOTH
      after:
        delimiter: "\n"
      sequence:
        - lambda: UARTDebug::log_hex(direction, bytes, 32);